Gorakhpur Industrial Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Gorakhpur Industrial Development Authority Tender
Civil And Construction
Civil Works Others
Building Construction
Eprocure
Opening Date28 Mar 2023
Closing Date18 Apr 2023
Tender Amount₹ 35,31,60,914
Costs
EMD
₹ 52,58,000Document Cost
₹ 2,950Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_UGIDA_790914_1Bid Award Id
ViewTender No
6255/ABHI.NI.6/CIVIL/2022-23 DT. 27.03.2023Tender Authority
Gorakhpur Industrial Development Authority ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Add to items 251 for every additional 30m. lead or part of 30m. Or for every additional 1.5m. Lift or part of 1.5m.
3869.55
61912
16
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km. from the site of work & including watering,dressing etc. Rate includes cost of all materials, labour and T&P etc. required for proper completion of the work.(Excluding royalty)
1453.9
1264893
870
Supply and filling of carted earth from a distance not exceeding 7.0km from the site of work and including cost of earth and all materials. Labour T & P etc. required for propoer completion of work. Earth work in ordinary soil, excavation to be in the form of regular pits not exceeding 0.50 mtr. in depth and earth work in embankment and subgrade & earthen soulders to be in 20 cm layers, including ramming and dressing the surface to requried levels and slopes and also including 1.50 meter lift and 30 meter lead. (Earth brought from outside GIDA notified area)
26837.09
8507357
317
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
All kinds of soil
-
-
-
Pipes, cables etc. exceeding 80 mm dia. but
not exceeding 300 mm dia
1298.38
470440
362.33
CONCRETE WORK
-
-
-
Cement concrete with 4 cm. (1½") gauge approved stone, ballast, approved coarse sand and cement in the proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of the work.
339.89
2195689
6460
As in item 279(i) above but in the proportion of 3 :1½ : 1
3.15
21924
6960
Cement concrete with 4 cm. (1½") gauge approved stone, ballast, approved coarse sand and cement in the proportion of 8:4:1 including supply of all materials, labour and T&P etc. required for proper completion of the work.
955.45
5192870
5435
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
222.72
131799
591.77
REINFORCED CEMENT CONCRETE WORK
-
-
-
As in Item No. 283 above but in RCC Raft foundation and footing with 4cm gauge approved stone ballast. 1:2:4
-
-
-
As in UPPWD- SOR (GKP) Circle item (287) above but in the proportion of (1:1.5:3) with 2.0 cm Gauge approved stone grit.
3433.14
24941762
7265
As in item No. 283 above but on RCC columns in 1:1.5:3
832.29
7956692
9560
As in Item No. 283 above but in havier beams i.e. having spans above 6m. 1:2:4
-
-
-
As in UPPWD- SOR (GKP) Circle item (286) above but in the proportion of (1:1.5:3)
1569.83
15357646
9783
R.C.C. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone grit in the proportion of 1:2:4 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.l. binding wire and includuing Necessary centering and shuttering etc.and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item.as per SI No 283
16.8
129948
7735
As in Item No. 283 above but in proportion 1:1.5:3
58
458780
7910
As in Item No. 283 above but for slabs.in the proportion 1:1.5:3
2065.5
18176400
8800
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
-
-
-
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
All works upto plinth level
-
-
-
Concrete of M25 grade with minimum cement content of 330 kg /cum
429.63
3238825
7538.64
All works above plinth level upto floor V level
-
-
-
Concrete of M25 grade with minimum cement content of 330 kg /cum
510.39
4566500
8947.08
Add for using extra cement in the items of design mix over and above the specified cement content therein.
470.01
280915
597.68
Centering and shuttering including strutting, propping etc. and removal
of form for
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
117.09
31302
267.34
Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
2021.01
1252419
619.7
Columns, Pillars, Piers, Abutments, Posts and Struts
1121.57
783080
698.2
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
518.7
301494
581.25
Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
1278.77
961251
751.7
Extra for shuttering in circular work (20% of respective centering and shuttering items)
-
-
-
For foundation
20
5346
267.34
For beams
385.99
239198
619.7
For column
216.92
151453
698.2
For wall
40.02
23261
581.25
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
-
-
-
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
1610.12
446212
277.13
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
473.85
26620
56.18
MASONRY WORK
-
-
-
M 150 class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.
741.49
4011460
5410
M 150 class brick work in 1:6 cement and coarse sand mortar in Super Structure including naccesary cutting and molding of bricks and including honey comb brick work thickness of One brick thick 9" with supply of all materials, labour and T&P etc. required for proper completion of the work.
2765.32
16553205
5986
M 150 class brick work in 1:4 cement and coarse sand mortar in Super Structure including naccesary cutting and molding of bricks and including honey comb brick work thickness of half brick thick 4.5" with supply of all materials, labour and T&P etc. required for proper completion of the work.
182.7
1146077
6273
Extra for forming cavity 5cm to 11.50 cm wide in cavity walls .
863.63
145304
168.25
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating and chemical barrier under and around the columns pits, wall trenche basement excavation top surface if plinth filling junction of wall and floor along the external per meter of binding expension joints surrounding of pipes and conduit ete. Complete (Plinth area of the building at ground floor only shall be measured as per I.S.6313(part ii 1981). Aldrine emulsificable concentrate of any other approved material such as Hepthachlor or chlordance will be used. The rate of application of chemical emulsion shall be as follows.
-
-
-
Treatment for masonry and foundatrion 5 litres per sqm
-
-
-
Back fill in immediate contact with foundation 7.5 liters/sqm.
-
-
-
Treatment of top surface of plinth filling 5 liters per sqm
-
-
-
Treatment junction of soil along extemal per meter building 7.50 litre/sqm.
-
-
-
Treatment of soil under apron along extemal perimeter 5 Iiter/ sqm.
4600.4
874076
190
CLADDING WORK
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
Granite stone slab all colour and texture except black, Cherry/ Ruby red
-
-
-
Area of slab upto 0.50 sqm
384.94
1188155
3086.6
Area of slab over 0.50 sqm
54.92
157406
2866.1
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
Granite work
356
129445
363.61
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
-
-
-
Granite Stone of approved shade
9.75
29987
3075.65
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
1451.38
1339914
923.2
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
-
-
-
Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
-
-
-
Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick).
The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
-
-
-
The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s
-
-
-
The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
1911.17
7423309
3884.17
WOOD & PVC WORK
-
-
-
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
-
-
-
125x64x1.90 mm
51
4228
82.91
100X58X1.90 mm
180
13460
74.78
Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:
-
-
-
300x16 mm
31
6293
203
250x16 mm
50
9050
181
Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
-
-
-
200x10 mm
40
2880
72
150x10 mm
48
2928
61
Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
-
-
-
125 mm
80
3840
48
100 mm
96
4128
43
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded
-
-
-
star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).
-
-
-
Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra
payment on this account shall be made.
-
-
-
Frame size 50 x 100 mm
410.4
303905
740.51
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
-
-
-
30 mm thick
148.26
508912
3432.57
Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc.
-
-
-
Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
-
-
-
Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm.)
85.32
577610
6769.93
Two track four panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm).
691.2
4070545
5889.1
Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.
-
-
-
Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
-
-
-
Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate
dimension. (Area upto 0.75 sqm.)
61.29
385749
6293.84
Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete.
14
2291
163.7
Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete.
394
57173
145.11
Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete.
130
10710
82.39
Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete.
11
1481
134.66
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
-
-
-
Float glass panes
-
-
-
5.0 mm thick glass panes (weight not less
than 12.50 kg/sqm).
830.52
1608675
1936.95
STEEL WORK
-
-
-
Mild steel or iron work in heavy sizes such as trusses; builts up gates, door, frames, record racks roof work, gates etc. wrought to required form including drilling holes, rivetting or welding where necessary, and also including supply of steel, bolts, nuts etc. & their fixing required for proper completion of the work.
47.25
243337
5150
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks.as per SI No 504 make by steel authority of India or equivalent.
7399.45
68951774
9318.5
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie roads, gratings etc. (when not included in an over all rates) wrought to required form, including of supply of steel, boalts nuts and wastage etc. and there fixing required for proper completion of work.
-
-
-
Same as item No. 502 but of fabrication of grill and stair case railing
305.26
1739982
5700
Supplying and fixing rolling shutters of approved make of 80x125 mm (3 x 3½") gauge cold rolled M.S laths inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets side guides and arrangement for inside and outside locking with push and pull operations complete but excluding the cost of top cover and spring.
1234.8
2284380
1850
Providing and fixing 27.5 cm. long wire spring grade no. 2 for rolling shutters.
500
375000
750
Providing & fixing ball bearing for rolling shutters
250
122500
490
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
288
153074
531.51
FLOORING
-
-
-
Laying of 25mm thick KOTA Stone of size 45 x 45cm and above flooring over previously prepared base with 2cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per direction of E/l including cutting polishing with wax polish including supply of all materials T&P etc required for proper completion of the work.
11667.97
11667970
1000
Same as above but in dado with 25mm thick stone
19.72
18734
950
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red
1166.25
2711263
2324.77
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
494.98
526431
1063.54
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
Size of Tile 60x60 cm
7.84
8083
1031
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
Size of Tile 600x600 mm
2.07
2635
1273.1
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
-
-
-
Dark shade pigment using ordinary cement
747.24
638292
854.2
ROOFING
-
-
-
Making expansion joints with 24 gauge 12.5 cm. Wide Aluminium sheet and 20 cm. Wide tarfelt firfixed with tamestic in roof are floors filling joints with approved bitumen 30/40 as per direction of Engineer incharge including supply of all materials, labour and T&P required for proper completion of work.
394.6
71028
180
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
77
17821
231.45
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.
-
-
-
110 mm diameter
1260
349725
277.56
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Coupler
-
-
-
110 mm
1060
110388
104.14
Single tee with door
-
-
-
110x110x110 mm
269
47976
178.35
Bend 87.5°
-
-
-
110 mm bend
263
30139
114.6
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110 mm
1044
280501
268.68
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of
0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.
-
-
-
Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
-
-
-
GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
734.49
1014918
1381.8
PLASTER & POINTING
-
-
-
12mm Thick plaster with cement mortar in proportion of 1:3 cement and fine sand of 1.25 FM over brick work minimum thickness not be less than 10mm including supply of all materials, labour and T&P etc. required for proper comletion of the work. (including racking & washing surface)
-
-
-
As in item 582 above but with cement and fine sand of 1.25 F.M. Mortar in 1:4
23579.76
3183267
135
12mm Thick plaster with cement mortar in proportion of 1:3 cement and fine sand of 1.25 FM over brick work minimum thickness not be less than 10mm including supply of all materials, labour and T&P etc. required for proper comletion of the work. (including racking & washing surface)
-
-
-
As in item 582 above but with cement and fine sand of 1.25 F.M. Mortar in 1:4
-
-
-
Add for extra labour and material for plaster over rough face of one brick walls.
15666.69
2334336
149
12mm Thick plaster with cement mortar in proportion of 1:3 cement and fine sand of 1.25 FM over brick work minimum thickness not be less than 10mm including supply of all materials, labour and T&P etc. required for proper comletion of the work. (including racking & washing surface)
-
-
-
As in item 582 above but with cement and fine sand of 1.25 F.M. Mortar in 1:4
246.01
31243
127
As in item 582 above but with cement and approved coarse sand in 1:3
-
-
-
Add for extra labour to all itmes of plaster if done in ceiling.
14004.12
2450721
175
Forming groove of uniform size from 12x12mm and upto 25x15mm in plastered surface as per approved pattern using wooden battens nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specification sna direction of the Engineer-in-charge.
2618.76
178075
68
Extra for plastering done on moulding, cornices or architraves including neat finish to line and level:
-
-
-
In two coats
4.31
3621
840.23
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers
40
2102
52.55
PAINTING & DISTEMPERING
-
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
52897.4
5686999
107.51
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
-
-
-
Two coats
35448.83
3740206
105.51
Applying priming coats with primer of approved brand andmanufacture, having low VOC (Volatile Organic Compound ) content.
-
-
-
With water thinnable cement primer on wall surfacehaving VOC content less than 50 grams/litre
44436
2487082
55.97
Finishing walls with Acrylic Smooth exterior paint of required shade :-
-
-
-
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm.).
15466.61
1422928
92
Apply priming coat over new steel and other metal surface after and including preparing the surface throughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes ,fine steel /wood scrappers sand papering and knotting including cost of all materials, labour and T&P etc required for proper completion of the work.
5017.9
95340
19
Painting first coat over priming coat(but excluding cost of priming coat) on wood or steel snd other metal surface with superior synthetic enamel standard make brushing to give an even shade and finish and includjng cleaning the surface of all dirt dust and other foreign matter sand papering and stripping including cost of all materials ,labour ,T&P etc required for the proper complition of the work.
-
-
-
Same as in item above but for every subsequent coat after first coat on wood or steel surface with paint of :
5015.2
250760
50
ROAD WORK
-
-
-
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
25333
451940
17.84
Dag-beling 15 cm (6") deep in one line aligned, with flags and jhandies as directed by Engineers in charge.
0.18
171
950
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.
1056
165485
156.71
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
-
-
-
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
158.4
365517
2307.56
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and
directions of Engineer-in-Charge.
79.2
192765
2433.91
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber,
-
-
-
finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).
-
-
-
Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
-
-
-
Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer
190.08
1651234
8687.05
Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete.
190
7943
41.81
Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge.
-
-
-
Using grade 'A' sealing compound conforming to IS: 1834.
1780
7244
4.07
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
42.24
315856
7477.66
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
-
-
-
60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
3575.3
2893812
809.39
SANITARY INSTALLATIONS
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:
16
70544
4409
Providing and fixing white vetreous china pedestal type water closet (European type) with seal and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid.
36
120744
3354
Providing and fixing white vetreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
28
131348
4691
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
52
86391
1661.37
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
36
9355
259.88
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
32mm dia (Flexible pipe)
56
3920
70
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
52
40768
784
WATER SUPPLY
-
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
-
-
-
External work
-
-
-
50 mm dia nominal bore
10
5679
567.91
65 mm dia nominal bore
60
40034
667.24
80 mm dia nominal bore
30
23937
797.9
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
50 to 80 mm nominal bore
2
2628
1314.06
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
Internal work - Exposed on wall
-
-
-
32 mm nominal dia Pipes
110
47840
434.91
40 mm nominal dia Pipes
42
24588
585.43
50 mm nominal dia Pipes
66
53113
804.75
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
External work
-
-
-
50 mm nominal dia Pipes
88.1
62092
704.79
65 mm nominal dia Pipes
85
116359
1368.94
80 mm nominal dia Pipes
170
293748
1727.93
100 mm nominal dia Pipes
90
219685
2440.95
150 mm nominal dia Pipes
15
76455
5097.01
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
15mm nominal bore
176
80256
456
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
45 cm length
-
-
-
15 mm nominal bore
144
10648
73.95
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
-
-
-
15 mm nominal bore
72
25632
356
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
Circular type
-
-
-
100 mm nominal dia
252
7265
28.83
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
Concealed work, including cutting chases and making good the walls etc.
-
-
-
15 mm nominal dia Pipes
246
106124
431.4
20 mm nominal dia Pipes
310
153267
494.41
25 mm nominal dia Pipes
528
312533
591.92
32 mm nominal dia Pipes
790
527072
667.18
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
25 mm nominal bore
32
11088
346.53
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
192
63655
331.54
Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per DSR 18.48
42000
252000
6
DRAINAGE
-
-
-
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
-
-
-
EHD - 35
-
-
-
Circular shape 560 mm internal dia
1
1696
1696.28
Supplying and fixing C.I. cover without frame for manholes :
-
-
-
455x610 mm rectangular C.I. cover with frame (low duty)
8
9315
1164.47
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
-
-
-
Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
72
444519
6173.88
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
15
106170
7078.06
Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
25176
8392.18
Extra for depth beyond 45 cm of brick masonry chamber :
-
-
-
For 455x610 mm size
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
55
269327
4896.86
For 500x700 mm size
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
15
80188
5345.92
For 600x850 mm size
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3.5
21807
6230.64
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
250 mm dia. R.C.C. pipe
240
169005
704.19
300 mm dia. R.C.C. pipe
98.13
76839
783.08
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
22921
11460.79
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
23663
23663.14
Extra for depth for manholes :
-
-
-
Size 90x80 cm
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
14111
7055.61
Size 120x90 cm
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
8459
8459.2
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
-
-
-
With 20x20 mm square bar
10
4051
405.16
Providing, laying and jointing PVC pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion
-
-
-
110 mm diameter
344.75
125144
363
Providing and fixing on wall face unplasticised Rigid PVC pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
-
-
-
Single socketed pipes
-
-
-
160 mm diameter
100
65100
651
Providing, laying and jointing PVC pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion
-
-
-
160 mm diameter
529.63
341078
644
Providing, laying and jointing PVC pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion
-
-
-
200 mm diameter
387.88
457692
1180
Providing and fixing PVC moulded fittings/ accessories for PVC pipes conforming to IS : 13592 , including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Coupler - 160 mm
231
58674
254
Coupler - 200 mm
112
61040
545
Providing and fixing UPVC moulded fittings/ accessories for UPVC pipes conforming to IS : 13592 , including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Single tee with door : 160x160x160 mm
20
14060
703
Providing and fixing PVC moulded fittings/ accessories for PVC pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Single tee without door : 160x160x160 mm
73
34529
473
Single tee without door : 200x200x200 mm
33
29733
901
Providing and fixing PVC moulded fittings/ accessories for PVC pipes conforming to IS : 13592, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Bend 87.5° : 160 mm
82
25666
313
Bend 87.5° : 200 mm
19
11058
582
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
160 mm
112
19824
177
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
100 mm inlet and 100 mm outlet pvc trap
240
158640
661
Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) up to haunches of PVC pipes including bed concrete as per standard design
-
-
-
100 mm diameter UPVC Pipe
344.75
158240
459
150 mm diameter UPVC Pipe
529.63
393511
743
200 mm diameter UPVC Pipe
351.88
307538
874
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concreteblocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20 mm diameter round bar
15
5618
374.58
2.00 to 4.75mm size pea Gravel, supply duly screened and washed.
9.29
8453
910
Supply and filling of coarse aggregate of size 20mm nominal size.
9.29
13006
1400
ALUMINIUM WORK
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
Anodised aluminium (anodised transparent
or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
75.6
34903
461.69
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge.
-
-
-
Pre-laminated particle board with decorative lamination on both sides
15.12
12483
825.65
WATERPROOFING
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
-
-
-
First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
-
-
-
Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
-
-
-
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
67.2
30138
448.49
Providing and laying "Brick Coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm. x 30 cm. and side wall parapet shall be mono tythic plaster wall upto 30 cm. higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour T & P etc. complete for proper completion of work.
3789.96
4168956
1100
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee
for 10 years against any leakage.
214.08
92073
430.09
Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer's specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R- 2010 i.e. by reducing permeability of concrete by more than 90%,compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
737.35
212777
288.57
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm.
-
-
-
The work shall be carried out all complete as per specification and the direction of the engineer-in- harge. The product performance shall carry guarantee for 10 years against any leakage.
-
-
-
For vertical surface two coats @ 0.70 kg per sqm
442.72
156132
352.67
For horizontal surface one coat @1.10 kg per sqm.
372.21
100664
270.45
Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 ?45 MPa and adhesive bond strength Class R3 ?1.5 MPa. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
-
-
-
For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat.
64.55
26318
407.72
For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @0.070kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar@0.040kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040kg to fill the hole)
500
8660
17.32
(Exterior side) After surface preparation first layer of Acrylic Polymer (CICO TAPECRETE P 151/ Equivalent) modified cementatious slurry of cement @ 1.0 kg. mixed with 1.0 kg. acrylic Polymer coating over the retaining wall exterior surface wall area. Polymeric coating with Fiber Glass Cloth.
302.04
182432
604
RAIN WATER HARVESTING & TUBEWELL
-
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
-
-
-
All types of soil
-
-
-
300 mm dia
280
143911
513.97
400 mm dia
180
129520
719.56
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.
-
-
-
All types of soil
-
-
-
400 mm dia
120
107934
899.45
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
-
-
-
150 mm nominal size dia
120
69640
580.34
200 mm nominal size dia
240
198343
826.43
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
150 mm nominal size dia
160
94713
591.96
200 mm nominal size dia
60
57256
954.28
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
4.8
5426
1130.57
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
4.8
5454
1136.37
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
4.8
5454
1136.37
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
56.38
72402
1284.18
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
-
-
-
200 mm dia
2
487
243.92
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
-
-
-
200 mm clamp
4
7263
1815.76
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
48
38202
795.88
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
-
-
-
200 mm dia
2
535
267.85
Providing and fixing C class G.I. column pipes complete with G.I. fittings, sockets etc. complete in all respects. 100 mm Ø nominal Bore.
300
515400
1718
Providing 100 mm Ø Butterfly Valve
2
8073
4036.5
Providing 100 mm Ø Non Return Valve
2
21677
10838.75
Providing 100 mm Ø Rubber Packing with Nut & Bolt
2
5382
2691
Providing 100 mm Ø Bend
4
9717
2429.38
Providing 100 mm Ø Tee
2
6727
3363.75
HORTICULTURE WORK
-
-
-
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
696.84
54423
78.1
Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).
348.42
179645
515.6
Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment).
174.21
51217
294
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :
-
-
-
Screened through sieve of I.S. designation 16 mm
174.21
50642
290.7
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
696.84
25469
36.55
Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).
-
-
-
In rows 5 cm apart in both directions
1161.4
20556
17.7
Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge
1161.4
101622
87.5
Providing and stacking of Ficus panda of height 60-90 cm, with 8-10 branches, and healthy foliage, bushy in big size HDPE bag as per direction of the officer-in-charge.
780
140400
180
Providing and stacking of Hamelia patens of height 60-75 cm. with 6-8 branches in poly bags of size 25 cm as per direction of the officer-in-charge.
375
18750
50
Providing and stacking of Polyalthia longifolia (Ashok) of height 180-195 cm. in gunny bag of size 30 cm as per direction of the officer-in-charge.
90
9000
100
Providing and stacking of Ficus religiosa (Peepal) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge.
1
65
65
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)
-
-
-
Holes 60 cm dia, and 60 cm deep
1
43
43.75
Holes 45 cm dia, and 45 cm deep.
90
1683
18.7
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)
-
-
-
Trees Plant
91
664
7.3
Hedge Plant /Ground cover
1155
2829
2.45
STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL
-
-
-
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.
4287.39
1378781
321.59
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for allheights and all levels, including:
-
-
-
Structural analysis & design and preparation of shop drawings for the specified design loads onforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., tructural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
-
-
-
Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers
-
-
-
Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.
-
-
-
Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
-
-
-
Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete.
This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop rawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all
samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing
over of the building for occupation. In the end, the Contractor
shall provide a water tight structural glazing having all the
performance characteristics etc. all complete as required, as
per the Architectural drawings, as per item description, as
specified, as per the approved shop drawings and as directed
by the Engineer- in-Charge.
-
-
-
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places.
-
-
-
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately.
-
-
-
The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or any other accreditation body which operates in accordance with ISO/ IEC 17011 and accredits labs as per ISO/IEC 17025
-
-
-
Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr
-
-
-
Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml.
-
-
-
Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml
-
-
-
Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm
-
-
-
Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test, Tests to be conducted on site.
-
-
-
Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml
93.25
251871
2701.04
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in- harge. The IGUs shall be assembled in the factory/ workshop of the glass processor.
-
-
-
(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2)
-
-
-
For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.
-
-
-
Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
93.25
273419
2932.11
PASSENGER & GOODS LIFT
-
-
-
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge.
-
-
-
Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.
1787.28
442190
247.41
SITC of Lift with Power Operated Doors and AC Variable voltage and variable frequency controls
-
-
-
13 Passenger Lift, Weight- 884 Kg, Speed 1.0 M/Sec., Travel-G+4
2
3130000
1565000
Goods Lift, Weight- 2000 Kg, Speed 0.5 M/Sec., Travel-G+4
2
5730000
2865000
Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash.
1600
1326400
829
Wiring point for fan / fesh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, including matching colour wash.
780
738660
947
Add for light / fan points with modular type switch in place of piano type switch.
2380
104720
44
Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch and socket etc. complete in all respect including matching colour wash.
245
108045
441
Supply and fixing and concealing of 25 mm dia. 16 SWG (1.5 mm.) thick rigid steel conduit pipe in the wall including cutting of brick work, laying of conduit and fixing it with M.S. hooks and then plastering with cement, sand mortar finished to the level, with matching colour wash including cost of proper threading of the conduit & providing necessary socket, bends and chuck nuts and as directed by the Engineer in charge with the supply of all material labour and T&P required for proper completion of work.
800
124800
156
Add for plug point with modular switch & socket in place of piano type switch & socket.
245
20335
83
Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect.
750
105000
140
Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked.
750
112500
150
Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc., complete in all respect.
30
5850
195
Add for fixing of tube fitting as pendent with two number 19mm dia. 16 gauge rigid steel conduit double check nuts : spring loaded flanges or M.S. hook fabricated from 25mm x 3mm flat iron duly grouted in the ceiling upto 3.5 height of ceiling, including painting with synthetic enamel paint. Alongwith supply of all materials, labour, T&P etc. required for proper completion of work.
800
248000
310
Supply and fixing of G.P. Boxes/Housing for Conceaded LED / CFL Lamps of approved make made up of 1.0 mm thick ISI Marked
510
51000
100
Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, with one number 14 SWG copper earth continuity wire etc., complete in all respects including matching colour wash etc. complete in all respect.
4200
869400
207
Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with one number 14 SWG copper earth continuity wire including matching colour wash etc., complete in all respect.
2400
554400
231
Supply and wiring of submain with two number 6 sq. mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with one number 14 SWG copper earth continuity wire etc. complete in all respect.
100
26300
263
Supply and wiring of 4 number 6 sq.mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 25mm dia heavy guage rigid steel conduit concealed in wall, with two number 14 SWG copper earth continuity wire including matching colour wash etc.complete in all respect.
400
166400
416
Supply and wiring of 4 number 10 sq.mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 32mm dia dia heavy guage rigid steel conduit concealed in wall, with two number10 SWG copper earth continuity wire including matching colour matching colour wash etc, complete in all respect.
250
165000
660
S&F of 100 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect
160
1326400
8290
S&F of 32 Amp. 240 V DP metal clad rewireable type switch fuse unit on M.D.F.E.G. / Teak wood board complete in all respect.
42
60480
1440
S & F surface/Flush mounting 4ways TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge.
95
342950
3610
S & F surface/Flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect, as Direct by Engineer in Charge.
45
101250
2250
S&F of 63 Amp. 4 pole MCB(10 KA) C Curve
5
11450
2290
S&F of 6 Amp. to 32 Amp. 4 pole MCB (10 KA) C Curve
80
128000
1600
S&F and making connection of 63 Amp. 4 pole 30mA ELCB/RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge.
80
236800
2960
S&Fand making connection of 25 Amp. 4 pole 30mA ELCB/RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge.
15
42000
2800
S&F and making connection of 25A 2 pole 30mA ELCB/ RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge.
45
102150
2270
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve
1030
267800
260
S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve
95
70300
740
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect.
40
354000
8850
Supply & Fixing of 20 Watt LED Surface Mounting weather proof Luminaire with PC Housing and opal finish cover confirming to IP 65 Complete in all respect.
225
456750
2030
Supply & Fixing of 40 Watt LED Surface Mounting weather proof Luminaire with PC Housing and opal finish cover confirming to IP 65 Complete in all respect.
812
1859480
2290
Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.
520
702000
1350
Supply and fixing of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect.
10
40700
4070
Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power toolmoter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.
1
231000
231000
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect.
8
105520
13190
Supply & fixingof 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation includingthe cost of foundation, foundationbolts, excavation & back fillingand Required T&P completee in all respect
25
522250
20890
Supply & fixingof 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length) on RCC foundation includingthe cost of foundation,foundationbolts, excavation & back fillingand Required T&P completee in all respect
7
150010
21430
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved
42
421680
10040
Supply and burrying of 75 mm Dia 3 Mtrs. Long Electrode casted with maintenance free, conductive concrete, non corrosive mixture ( Ultra low Resistive carbon 0.001 ohm/Mtr) in the ratio of 3:1:1 (marconite : cement : water) on M.S. Rod wiih hole (16 mm diameter X3 Mtrs ) will be vertically installed for earthing with 1 Mtr G.I strip (25 mm X 2.5mm) connected with SS nut bolt. The earth electrode will be installed into the 100 mm pit up to 3000 mm depth. noraml soil will be used as backfill material.
18
354600
19700
Supply and fixing of vertical down conductor of 32mm x 6mm G.I. strip etc. on approved clamps on surface for lightning conductor complete in all respects (for two storeyed Buildings).
1200
372000
310
As in item 713(A) but for three or four storeyed buildings.
500
177500
355
Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.
800
160000
200
Same as PS 721 but with one number 8 SWG copper wire
801
208260
260
Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and two earthing lead of two no. 8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect.
300
3135000
10450
Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality.
20
51000
2550
Supply and laying aluminium armoured XLPE (1.1KV) cables at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc
2Cx10 sq mm.
2500
730000
292
4Cx10 sq mm.
900
294300
327
3.5Cx25 sq mm.
5600
1976800
353
3.5Cx50 sq mm.
280
137760
492
3.5Cx70 sq mm.
490
300370
613
3.5Cx120 sq mm.
230
189520
824
3.5Cx185 sq mm.
130
148200
1140
3.5Cx300 sq mm.
1180
1903340
1613
1Cx800 sq mm.
480
1141440
2378
Deduct in item no. 501 (I) 501 (t) and 506 (a) to (f) when cables is passed through G.I./M.S. or Hume pipe in road crossing or along the wall. The cost of the G.I. pipe, hume pipe is to be extra when and where required.
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.
2Cx10 sq. mm.
85
6800
80
4Cx10 sq. mm.
70
6090
87
3.5Cx25 sq. mm.
160
19680
123
3.5Cx50 sq. mm.
6
1068
178
3.5Cx70 sq. mm.
8
1592
199
3.5Cx120 sq. mm.
4
972
243
3.5Cx185 sq. mm.
2
794
397
3.5Cx300 sq. mm.
6
3030
505
1Cx800 sq. mm.
7
2100
300
Supply and laying of 3Cx120 sq mm aluminium armoured XLPE (11KV) cables confirming to I.S. 7098 at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc.
60
88800
1480
Supply and laying of 3Cx300 sq mm aluminium armoured XLPE (11KV) cables confirming to I.S. 7098 at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc.
100
446900
4469
Supplying, Installation, Testing & Commissioning of 11KV VCB indoor type panels shall be constructed from CRCA Zinc coated steel sheet of minimum 2 mm thickness, floor mounted metal enclosed, totally enclosed and fully interlocked, horizontal draw out, horizontal isolation type breaker as per IS 13118, as amended up to date, suitable for use on 11 KV, 3 phase, 50 Hz A.C. supply with short circuit fault level of minimum 36 kA .
1
3129839
3129839.4
1250KVA Transformer: Supply, Installation, testing & commissioning of 1250 KVA copper wound 11/0.433 KV, Delta star connected oil immersed indoor type transformer with OFF load circuit tap changer unit range (-)10% to (+)10% on HT side in steps of 2.5% complete with all accessories as per required and as per new/letest specification.
2
3933000
1966500
250KVA Transformer: Supply, Installation, testing & commissioning of 250 KVA copper wound 11/0.433 KV, Delta star connected oil immersed indoor type transformer with OFF load circuit tap changer unit range (-)10% to (+)10% on HT side in steps of 2.5% complete with all accessories as per required and as per new/letest specification.
1
557750
557750
250KVA DG: SITC of D.G. SET. 250 KVA DG set totally enclosed in an sound proof Acoustic Enclosure (As Per CPCB Norms) comprising of diesel engine of suitable BHP directly coupled with alternator capable to deliver 250KVA, 433 Volt, 50Hz, 3 phase, AC Supply at 0.8 power factor mounted on a common base frame complete in all respect.
1
1777237
1777237.6
SITC of Main Busbar Panel: Incoming Side 2000A 4P ACB with O/L, S/C & E/F (BC-65 KA-MDO Typer, Microprocessor based) - 3 nos. (Mechanical Interlocking System,at a time only Two ACB ON ), Metering with flush mounted CT operated Multifunction Meter class one -2Sets. BUSBAR - 2500A aluminium busbar (0.8 Amp /sq mm) with sutaible size heat srinkable sleev & insulator.Outgoing Side: 630A TPN MCCB (50KA-Thermal Release)-06No, 200A TPN MCCB (36 KA-Thermal Release) -2Nos. Fabrication will be 16 SWG CR sheet with poweder coating paint.
1
1904159
1904159.58
SITC of Busbar Box Panel-1/2/3/4: 800A TPN MCCB (50KA Thermal Release) with Phase Indicating Light-01Nos & 800A aluminium busbar (0.8 Amp /sq mm) with sutaible size heat srinkable sleev & insulator, Suitable for termination of 3.5Cx300 sq alu Armouerd cabl (2No) at Incomming Side & 4Cx16 sq mm Copper Unarmoured cable(35No) at Outgoing Side.
4
552700
138175.11
SITC of Busbar Box Panel-5/6: 200A TPN MCCB (36KA Thermal Release) with Phase Indicating Light-01Nos & 250A aluminium busbar (0.8 Amp /sq mm) with sutaible size heat srinkable sleev & insulator, Suitable for termination of 3.5Cx120 sq alu Armouerd cabl (1No) at Incomming Side & 2Cx6 sq mm Copper Unarmoured cable(25No) at Outgoing Side.
2
140904
70452.35
SITC of Main Common Panel: Incoming Side 630A 4P ACB with O/L, S/C & E/F (BC-50 KA-EDO, Microprocessor based) - 2Nos. (Automaict Electrcal Interlocking System,at a time only Two ACB ON ), Metering with flush mounted CT operated Multifunction Meter class one -2Sets. BUSBAR -600A aluminium busbar (0.8 Amp /sq mm) with sutaible size heat srinkable sleev & insulator.Outgoing Side: 250A TPN MCCB (36KA-Thermal Release)-02No, 100A TPN MCCB (36 KA-Thermal Release) -8Nos, 63A TPN MCCB (36 KA-Thermal Release) -2Nos, 63A 4P MCB (10 KA) -3Nos,. Fabrication will be 16 SWG CR sheet with poweder coating paint.
1
873348
873348.67
SITC of Utility Panel-1/2: Incoming Side 100A 4P MCCB (25KA-Thermal Release) - 01Nos. (Automaict Electrcal Interlocking System,at a time only Two ACB ON ), Metering with flush mounted CT operated VAF Meter class one -01Sets. BUSBAR -150A aluminium busbar (0.8 Amp /sq mm) with sutaible size heat srinkable sleev & insulator.Outgoing Side: 32A 4P MCB (10 KA) -07No, 32A 2P MCB (10 KA) -02No & 32A 4P MCB & 10A SP MCB with 40A Power Contactor & 24H Digital Timer - 01Set. Fabrication will be 16 SWG CR sheet with poweder coating paint.
2
150861
75430.54
SITC of Utility Panel-3: Incoming Side 100A 4P MCCB (25KA-Thermal Release) - 01Nos. (Automaict Electrcal Interlocking System,at a time only Two ACB ON ), Metering with flush mounted CT operated VAF Meter class one -01Sets. BUSBAR -150A aluminium busbar (0.8 Amp /sq mm) with sutaible size heat srinkable sleev & insulator.Outgoing Side: 32A 4P MCB (10 KA) -03No, 32A 2P MCB (10 KA) -01No & 32A 4P MCB & 10A SP MCB with 40A Power Contactor & 24H Digital Time - 01Set. Fabrication will be 16 SWG CR sheet with poweder coating paint.
1
68401
68401.14
SITC of Lift Panel-1/2: Incoming Side 100A 4P MCCB (25KA-Thermal Release) - 01Nos. (Automaict Electrcal Interlocking System,at a time only Two ACB ON ), Metering with flush mounted CT operated VAF Meter class one -01Sets. BUSBAR -150A aluminium busbar (0.8 Amp /sq mm) with sutaible size heat srinkable sleev & insulator.Outgoing Side: 63A TPN MCCB (25 KA-Thermal Release) -03Nos, 32A 4P MCB (10 KA) -03Nos, 32A 2P MCB (10 KA) -03No. Fabrication will be 16 SWG CR sheet with poweder coating paint.
2
240221
120110.75
DSR2022- E&M Works
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3Cx300, XLPE aluminium conductor cable of 11 KV grade as required :
4
79947
19986.92
Supplying and making 11 KV indoor/outdoor heat shrinkable jointing kit with all accessories, suitable for 3CX120 sq mm, XLPE aluminium armoured cable.
10
131238
13123.8
Supplying and installing (300 mm width X 50 mm depth X 1.6 mm thickness) perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
700
591248
844.64
Supplying and fixing of 1 or 2 Module (75mmX75mm) modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required.
150
39229
261.53
Supplying and fixing of 3 Module (100mmX75mm) modules, GI box alongwith
modular base & cover plate for modular switches in recess etc.as required.
10
2870
287.09
Supplying and fixing of 6 Module (200mmX75mm) modules, GI box alongwith
modular base & cover plate for modular switches in recess etc.as required.
10
3521
352.13
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections & modular plate etc. as required
750
242325
323.1
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
150
19449
129.66
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
245
125817
513.54
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
210
133942
637.82
Supply of AC 300 mm Sweep, 230/250 Volts, 50 Hz heavy duty exhaust fan with blades, cover etc. complete as required.
40
87600
2190
Supply of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan without regulator, standar down rod, blades etc. complete as required.
750
1938750
2585
600KVAR APFC Panel: Supply, Installation, testing and commissioning of 600 KVAR Automatic Power Factor Correction (APFC) Panel, (using of 1000A 3P MCCB-50kA and 14 stage APFC relay) for 3-phase 415V & 50 Hz system. Capacitor banking ratio 1:2:4:8….using 440 volts Heavy duty Capacitor box type and control with Capacitor duty contactor, 1 set metering with 96x96 mm flush mounted CT operated Digital Amp. & Volt meter with control fuse, phase indicating light and current transformer and ON/OFF indicator, push button & Amp meter for each bank.
2
1776000
888000.1
150KVAR APFC Panel: Supply, Installation, testing and commissioning of 150 KVAR Automatic Power Factor Correction (APFC) Panel, (using of 250A 3P MCCB-36kA and 12 stage APFC relay) for 3-phase 415V & 50 Hz system. Capacitor banking ratio 1:2:4:8….using 440 volts Heavy duty Capacitor box type and control with Capacitor duty contactor, 1 set metering with 96x96 mm flush mounted CT operated Digital Amp. & Volt meter with control fuse, phase indicating light and current transformer and ON/OFF indicator, push button & Amp meter for each bank.
1
227999
227999
Supplying and fixing single headed internal/external hydrant valve with instantaneous Gunmetal/stainless steel coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 5290(Type-A) with blank Gunmetal/Stainless Steel cap and chain as required
Single Headed Stainless Steel
50
269133
5382.66
Supplying and fixing fire-aid Hose Reel with MS construction spray painted in post office red,conforming to IS 884 complete with the following as required 20mm nominal internal dia water hose thermoplastic(Textile reinforced) type-2 as per IS:12585 20mm nominal internal dia gun metal globe valve & nozzle drum and bracket for fixing the euipments on wall connections from riser with 25mm dia stop gun metal valve and MS pipe and socket
a) 30M
30
228198
7606.61
Supplying and fixing 63mm dia, 15m long RRL hose pipe with 63mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636(type-A) as required
a) Stainless Steel(Grade 304)
100
389990
3899.9
Providing and fixing of 1.6 mm thick M.S/door frame, door capable of accommodating fire hose reel, landing valve, hose pipes, fitting & accesssories. The door shall have a front glass with lock and key arrangement & shall be painted with post office redcolour(approval shall be taken on the basis of submitted sample before ordering)
30
465750
15525
Providing and fixing of 1.6 mm thick M.S/door frame, door capable of accommodating fire hose reel, landing valve, hose pipes, fitting & accesssories. The door shall have a front glass with lock and key arrangement & shall be painted with post office redcolour(approval shall be taken on the basis of submitted sample before ordering) cost of fire extinguishers not included in item rate(liasioing with civil contracter for making recessed type mansoary box(by civil contracter)
Size : 750 x 600 x250 mm(Outdoor Cabinet)
20
122800
6140
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required:
Make – Gtech/Lifeguard/Safeguard
2Way-100mm dia M.S pipe
a) Raw Material Storage Facility & Marketing Outlet
2
11822
5911.14
b) 4 Way-150mm dia MS pipe
4
49011
12252.93
Supplying and fixing 63mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:
a) Stainless steel(Grade 304)
38
55376
1457.27
Supplying and fixing air vessel made of 250mm dia, 8 mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
13
207953
15996.45
Providing , laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fitting like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamps/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:
150mm dia
610
1911624
3133.81
100 mm Dia
349
781927
2240.48
80mm dia
330
545288
1652.39
65mm dia
260
367850
1414.81
50mm dia
830
932247
1123.19
40 mm dia
540
489364
906.23
32mm dia
730
544974
746.54
25mm dia
2160
1408125
651.91
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories:
Pendent Sprinkler
946
432927
457.64
Upright Sprinkler
946
432927
457.64
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.
1000mm
800
1106688
1383.36
1200mm
800
1171728
1464.66
Providing, Fixing, Testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze
seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound
continous alarm when the wet riser/sprinkler system activates, pressure guages
emergency releases, strainer, pressure switch, cock valve complete with drain
valve and bypass, test control box, ball valve, MS pipe of required size, flanges
orifice plate, gasket etc of following sizes as required:
a) 150mm dia
6
253584
42264.03
Providing, installation, testing and commisioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required:
a) 150mm dia
15
233921
15594.79
b) 100mm dia
8
77510
9688.87
c) 80mm dia
2
13487
6743.74
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required:
a) 150mm dia
42
329966
7856.35
b)100mm dia
22
128611
5845.97
c) 80mm dia
31
135422
4368.46
Supplying and fixing orifice plate made out of 6mm thick stainless steel(Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 Kg/cm2 complete as required
53
61402
1158.53
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6mm thick stainless steel, Grade 304, sheet with 3mm dia holes with stainless steel flange
a)150mm dia
3
29312
9770.93
b) 100mm dia
3
17529
5843.14
Supply Instalation, Testing & commissioning of 5000 Ltr
Terrace water Storage Tank Complete with all necessary Fitting Inlet Piping ,Outlet Piping Stop Ball Cock,Drain Valve,Drain Pipe, Air Check
Valve T,Bend,Elbow,Nut,Bolt & Reducer Complete in all respect along with base of water storage tank
8
487240
60905
Providing & Fixing of pressure switch in M.S pipe line including connection etc as required
5
6777
1355.48
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm, thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc of suitable size of as directed by the Engineer in charge complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
a) 25 Sqmm x 3.5 core
180
67140
373
b) 70 Sqmm x 3.5 core
60
36780
613
Supplying, installation, testing, commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required:(Terrace Pump)
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520
Suitable HP Squirrel cage induction motor, TEFC type suitable for operation on 415 Volts, 3phase 50 Hz, AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS-325
M.S fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered with anti vibration pads
900 lpm at 35 m Head
2
178620
89310.48
ELECTRICALS
Supplying , lnstalltion, testing and commissioning of electrical control panel of cubicle construction, floor/ wall mounted type.fabricated out of 2 mm thick CRCA sheet.compartmentalised with hinged locakable doors,dust and vermin proof,powder coatedof approved shade after 7 tank treatment process.cable allef,inter connection ,having switchgears and access ories mountingand internal wiring,earth terminals
numbering etc. complete in all respects.suitable Outlet Piping Stop Ball Cock, Drain Valve, Drain Pipe Air Check Valve protection class IP 42 as required.for terrace,Roof Cover over panel. (Fault Level, IP Level Protection)
Panel for 12.5 HP.
2
187912
93956
Supply and fixing of C02 type fire extinguisher 4.5kg capacity (ISI Marked IS:2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work
54
646920
11980
Supply and fixing of fire extinguisher, ABC Type 6.00 kg capacity (ISI Marked IS:15683 & TAC Approved) complete with initial charge and wall bracket,along with supply of all material and labour for proper completion of work
54
491400
9100
Providing and fixing if Self illuminated / Auto Glow Exit Sings Printed on Photo - luminescent sheet containing self illuminated base chemical of appropriate size not less than 300 x 150 mm , Suspended from ceiling or fixed to the wall with accessories riquired and as directed at site.
100
228000
2280
INCOMING
630A,50KA 4 pole MCCB, Ics=100% Icu Rating Digital Voltmeter 0-500V with selector switch Ammeter (0-630 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 800 Amps
OUTGOING
(Note: All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
Outgoing
Main Fire Pump
200 Amp, 50KA TPN MCCB, Ics=100% Icu, with fully automatic star/delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation-2 Sets
Jockey Pump
100 Amp, 50KA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation-2 Sets
Diesel Engine
Control for diesel engine comprising- Automatic/Manual selector switch & 3 attempts starting device, timers and relays as required, push button, stop/stop in manual mode Indicating lamp for high/Low lub, oil pressure, High Water Temp and Engine on indication Battery Charger suitable for 12V/24V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20A DC Ammeter All Standard relays and accerssories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, pressurization pump, terrace pump in sequence as per specifcation consisting of relays, timers, sensors, annunciation window for fault indication, complete as per specification
1
393980
393980.8
Supplying, installation, testing, commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Diesel Driven Pump)
Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520
Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10m outside pump house duly insulated with 50 mm thick glass wool with 1mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with auto indication,painted with post office red colour etc. as required
M.S fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered with anti vibration pads
2280 lpm at 70 m Head
1
536663
536663.6
180 lpm at 70 m head
1
90577
90577.68
2280 lpm at 70 mtr Head
1
323598
323598.04
a)200 mm dia(Wall thickness=6.3mm)
24
117013
4875.58
b)150 mm dia
750
2501280
3335.04
FIRE DETECTION AND ALARM SYSTEM(CONVENTIONAL)
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connection etc as required
594
600712
1011.3
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required
30
12480
416.02
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc as required
594
102233
172.11
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement,mounted in MS box(16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required
30
14658
488.62
Supplying & Laying od 2x1.5 sqmm fire alarm armoured cable,600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required
9000
1362420
151.38
Supplying, installation,testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following item duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public adress system, monitoring system including connections, interconnections etc complete as required 10 Zone Panel for fire alarm system 250 Watt Amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required-2Nos(one to act as standby) Talk Back master station with LED PTT(press to talk) push button for operation on 230V AC/24V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit-1 set Annoucement control desk suitable for selection of diffrent zones selectively and ON ALL CALL switch with visual indication etc.complete as required-1set Amplifier change over switch for inter changing amplifier-1 No Monitor panel for loudspeaker complete with output selector,ON/OFF switch, fuse, visual indications etc.complete as required-1 No Gooseneck microphone with stand and ON/OFF switch-1No. Main ON/OFF switch, fuse indication lamps, DC and AC voltmeter & ammeter, terminal blocks etc, complete as required-1 Set Battery Charger Trickle cum boost to take complete load of fire alarm & PA system complete with all accessories inluding providing & fixing of 2 nos, 12 volt, 60 AH each sealed maintenance free batteries-1 Set
3
185153
61717.94
Waste Water Treatment Plant for Treating Complete waste generated at building from Toilets, Kitchens, Floors Cleaning area, etc based on Fludised Media Reactor technology (FMR) of capacity 80 cum per day including iother ancillary and releted works including Design, Engineering, and preparation of civil / structuaral drawings and providing all equipment / Piping etc. at site, installation / erection, testing and commisioning of equipments / electricals / piping etc. for Sewage treatment plant and system requirement to meet the parameters for reusing water for gardening, car washing flushing etc. The plant comprises of the following civil construction i.e. Bar Screen Chamber, Oil Grease Traper, Sludge Holding Tank, Equilization Tank, Treated Water tank, Break Water Tank, any Grease Trap which shall be payable in extra should be constructed based on standrad design of STP supplier.
BAR SCREEN Supplying, installing, testing and commissioning of bar screen consisting of one set shall be provided infront of the intake works, so as to exclude the large sized particles with associated set of guide angles in MS flat of 10.0 mm screen kept inclined at 45 degree to the horizontal at 40 mm c/c with one no. GI handrack. Bar rack fabricated from SS - 304 bars to cover the width of the screen chamber with a racking arm for manual operation.
1
34845
34845
RAW SEWAGE LIFTING PUMPS
Supplying, installing, testing and commissioning Consisting of 2 Nos. centrifugal Non-submersible/ Summersibale type raw sewage water pumps (one working + one standby) with cutter version to pump sewage from equilisation sump to aeration tank at uniform flow rate. The pump shall 3 H.P. electrical motor, mounted on a common base frame. The rate quoted shall be inclusive of: Solid handeling 50mm
Industrial type electronic liquid level controllers with stainless steel probes / sensors or float switch for automatic operation.
1no. pressure gauge 4" dial with valve tee and fittings.
2nos. cast iron lever operated slim seal type butterfly valves of CI body and spheroidal graphite iron disc (SG iron),with nitrile rubber seal, tested to 10 kg / sq.cm Confrming to BS 5155 / MF6 standards and including a set of GI flanges as per BS-10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc., (inter valve / audco make) on the delivery side.
2nos. slimseal flap type check valve with CI body and cast steel disc pressure rating PN-10 Kg / sq.cm including a set of GI flanges as per BS-10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc., (inter valve / audco make) on the delivery side.
GI manifold finished neatly with hot dip galvanizing to 100 microns with flanged end on either sides and collar provision for connectivity of above mentioned valves.
The pump shall be suitable for the following requirements:
Flow rate -5.0 cu.m / hr
Head - 10 mtr
1
81305
81305
COARSE BUBBLE DIFFUSERS FOR EQT
Supplying, installing, testing and commissioning, consisting of coarse bubble duffuser with HDPE pipegrid with necessary orifices HDPE pipe with removable deflector to provide clog-free oxygen for Equalisation Tank .
1
69690
69690
FINE PORE DIFFUSERS FOR AERATION TANKS Supplying, installing, testing and commissioning, consisting fine bubble diffuser along with membrane from EDI, USA, set of EPDM membranes, SS 304 clips PVC support pipe(10 ksc pressure rating),PVC fitting, nylon rope braided hose with all accessories to make it retrievable & to provide clog-free oxygen for Aeration Tanks.
1
52267
52267.5
Motor HP/ RPM - 5 / 1500
2
383295
191647.5
FILTER FEED PUMP:
Supplying, installing, testing and commissioning of filter feed pump Consisting of 2 Nos. centrifuge non-submersible type filter feed pumps (one working +one standby) to feed semi tested water to secondary treatment process through sand pressure filter, activated carbon filter and softener. The pump shall be coupled to the adequate H.P. electrical motor, mounted on a common base frame. The rate quoted shall be inclusive of: Head - 25 mtr
1
69690
69690
Supply, installation, testing and commissioning of FMR Tanks in MSEP with Mechanical Part (6.8 x 2.13 X 2.2) m L x B x H, FMR media, and lamella settling Plates to be installed in Settling Tank alongwith suitable sludge removal arrangement [FMR System to be in two reactors] and 5 internal partitions - Inlet Chamber, Aeration One, Aeration Two, Lamella Settler, Chlorine Contact tank.
1
1260227
1260227.5
Head - 5 - 10 mtr
1
46460
46460
(including installation)
1
209070
209070
(including Installation)
1
307797
307797.5
Providing & fixing of slim seal type cast iron horizontal flap type non return valves tested to 20 kg / sq.cm (Intervalve make) including a set of GI flanges as per BS - 10 Table, bolts, nuts, GI washers, Neoprene rubber gaskets etc.complete.
1
464600
464600
Control Connector, Lugs/sockets shall be of copper conductor and of Aluminium for conductor cable,suitable,solderless, crimping type.
1
290375
290375
Cabling & cable tray
1
116150
116150
Supply, installation, testing & commissioning of Hydraulic Filter Press, of Suitable Capacity 24" x 24" x 24" plates with CI frame, of PP plates with filter cloth interconnecting piping and poly dosing, Make: W2P/Sachin/Pharmatech/DFP/Auro
1
406525
406525
Supply, installation, testing & commissioning of Electromagnatic Type Flow, Meter having acrylic body coupled with MS Flanges, of suitable capacity, for 20 m3/h plant. Size : 3" on iNCOMING and on dISCHARGE Pipe Line, (Make:- Electronet/ Aster/Adept).
1
92920
92920
Installation / Erection and commissioning of complete system alongwith piping, fabrication work, supply of piping required for STP , elecctrical connections etc.
1
232300
232300
SITC of 400 LPM and 7.5 HP submersible pump with all assessories conneciton cables switch gear cubical panel having volt meter range 0-440 V with selector switch, Ammeter 0-100 Amp. With selectors switch K.W.L. meter for 7.5 HP, power factor meter, frequence meter, hour count meter, fuse of 250 Amp., phase indicator, lamp with toggle switch, single phasing premeter, power capacitor auto transformer starter.
2
190042
95021.05
SITC of Submersible pump of approved make with suitable capacity motor having 2000 liter per minute discharge working on 415 volts +/- 6% volts, 50 Hrz electrical supply and requried head as per water table including electrical control panel / switchgears of approved make with S/D Starter, ammeter, voltmeter single phasing preventor cutouts, protection rings, transformer oil and all motor protection arrangement complete in all respects. Total (Applicable G.S.T @18% And Labour cess @1% Extra in All Item )
2
441289
220644.75
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements