Ghaziabad Development Authority Tender

Supply and fixing and erection of built up overhead structure 8.00 m span & width 1.20m comprising of existing & extended RCC columns Vertical Post of 6.00 m height made up of extended 0.50 X 0.50 X 3.00 m RCC colums in ratio of 1:1½:3 cement coarse sand & 20mm gauge, Stone grit including required MS steel as per direction of E/I with 12 mm MS plate at top and bottom. The horizontal truss shall be comprise of 40 mm dia heavy class MS pipe as bracing as per structure design and drawings with one of steel primer and two of Synthetic enamel paint. Including supply and fixing of 25mm dia bolts 600 mm long as per provision of Structure design. Including cost of reinforcement & shuttering the lateral Vertical clearances all complete. Installation work, shall be as per relevant clauses of morth Specification sect 800 and IRC 67 2010 Complete in all Respect. The rate shall include cost of design, fabrication, Supply of transportation, local shifting erection of signage structure using Crane, inclusive of all taxes, for proper completion of work as per direction of E/l. (Analysed Rate)

Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. With 7 years warranty. Rales include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, all T&P/machine material and labour required for proper completion of work. Note: The Composite warranty Jointly signed by original manufacturer & authorized converter of at least 7 years shall bo furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. (retro-reflective signage Size 1.80 X 1.20 m)

Retro reflective sign board made up of 2 mm thick aluminium sheet, face to be fully covered with 3M high intensity prismatic reflective sheeting series 3930,letters/ symbols shall be made of same retro-reflective sheeting and computer cut as per colour required. Boards are to be supplied along with back support frame of MS angle size 35x35x5 mm.and back side of aluminium sheet shall be painted with stove enamel paint. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, all T&P/machine material and labour required for proper completion of work. Note The Composite warranty Jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage