Ghaziabad Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Ghaziabad Development Authority - GDA Tender
Agriculture or Forestry Works
Eprocure
Opening Date4 Jun 2018
Closing Date25 Jun 2018
Tender Amount₹ 5,10,36,232
Costs
EMD
₹ 10,22,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_GDAUP_212412_1Bid Award Id
ViewTender No
122/Horticulture/2018 Date 23-05-2018 (S.n.-6)Tender Authority
Ghaziabad Development Authority ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Mild steel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. Upto plinth
184.33
1032248
5600
R.C.C. work with cement approved coarse sand and 2cm (3/4'') gauge approved stone ballast in the proportion 1:2:4 (1Cement: 6 aggregate) in lintels of doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same necessary with 24BWG binding wire and including necessary centering and shuttering etc. and also including supply of materials labour and tools and plants etc. required for proper completion of the work, strength of the concrete shall not be less than M-150 As in item 7 above but in R.C.C. raft foundation and footing with 4cm gauge approved stone ballast
141.13
882062
6250
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but (ii) Fabrication of Grill/Stairs case railing
5.68
36068
6350
Mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work.
1189.53
7672468
6450
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places."
1811
5953481
3287.4
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
666
29317
44.02
Supplying and stacking of good earth at site including royalty and carriage upto 5km complete (earth measured in stacks will be reduced by 20% for payment)
666
212620
319.25
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.
2220
6371
2.87
Fine dressing of the ground.
2220
4573
2.06
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
666
19786
29.71
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
2220
434542
195.74
Preparation of mounds of various size and shape by available excavated/supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
138.75
35578
256.42
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) Tree Plants
50
204
4.08
Shrubs Plant
500
1030
2.06
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand)
3807.22
369871
97.15
Main Gate-Supply and laying of aluminum conductor PVC insulate armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground levelover a cushionof 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 3.5 x 35 sq.mm
250
96195
384.78
4 x 6 sq.mm
2500
675800
270.32
3 x 4 sq.mm
150
36619
244.13
2 x 6 sq.mm
150
36957
246.38
3x 2.5 sq.mm
250
47940
191.76
Supply and fixingof brass nickle plated compressiongland for PVC insulated& armoured served sheathed, undergroundcable including rubber ring etc. complete in all respect. The armouringof the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 3.5 x 35 sq.mm
4
551
137.9
4 x 6 sq.mm
100
6646
66.46
3 x 4 sq.mm
4
229
57.48
2 x 6 sq.mm
4
265
66.46
3x 2.5 sq.mm
6
224
37.48
Supply and Fixing of cable route marker in suitable masonry enclosure as directed by the Engineer-Incharge.
50
13184
263.68
Supply and fixingof 3 Watt LED Path / Walkover luminaire having powder coated die cast aluminium body with drive set .Confirming to IP 65 and above Protection complete in all respect. CAT-AAA
30
56267
1875.58
Supply and fixing of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 and above protection complete in all respect. CAT-AAA
10
51224
5122.44
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 75 to 90 Watt. Confirming to IP 65 protection complete in all respect. CAT-AAA
10
122146
12214.66
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 150Watt. Confirming to IP 65 protection complete in all respect. CAT-AAA
20
468880
23444.02
Supply and fixingof LED Street light Fitting having die cast aluminiumbody and diffuserwith driver set suitable for 52 watt to 72 Watt. Confirmingto IP65 and above Protection complete in all respect. CAT-AAA
40
409957
10248.93
Supply and fixingof 3 Watt to 4 Watt LED Spot/Spike light Confirming to IP 65 and above Protection complete in all respect. CAT-AAA
35
49672
1419.22
Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminairehaving Pressure die cast aluminiumbody and Clear glass with driver set confirmingto IP 65 and above protection complete in all respect. CAT-AAA
65
891695
13718.39
Supply and fixing of RGB Flexible 12W/m outdoor LED Strip light confirming to IP 67, complete in all respect.
75
75000
1000
Supply and fixing of Outdoor type Up-Down 2x6W Wall LED Fixture confirming to IP 67 and above, complete in all respect.
10
62000
6200
Supply & fixingof 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundationbolts, excavation & back filling and Required T&P completee in all respect.
40
602761
15069.04
Supplying and fixing of 4M (1m in & 3m out) GI Poles as per IS-1161 with latest amendment complete with 200x200x12mm MS base plate including PU paint after chemical traetment and CKT marking as per drawing.Tthe pole to be erected on cement concrete foundation of 1:2:4 with collar including 10A DP MCB & Busbar & excavatiom in all type of soil as required & as per drawing.
65
698750
10750
Design & Supply of cubicle type, LT outdoor feeder pillar, double door fully compartmentalised, dust and vermin proof, made out of 2 m.m. thick CRCA sheet steel, floor mounted, free standing, lockable, confirming to IP- 55, mounted on finished brick foundation, powder coated/ epoxy painted, cable entry from bottom, with following configuration- (FP) MCCB's shall be Ics = 100% Icu, STREET LIGHT INCOMER :- 63A 4P MCCB, 100A TPN+E Aluminium bus bar, Suitable cable gland for 4.0Cx 50 sq. mm., OUTGOING :- 10A SP MCB - 15 Nos., 16A SP MCB - 05 Nos., 40A 4P MCB - 02 Nos., 40A DP MCB - 02 Nos., Timer & Contactor - 1 Set
2
121740
60870
Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.
4
11718
2929.51
Supply and fixing one number 8 SWG G.I. wire in 15 mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand labour, T&P other material required for proper completion of the other work as directed at site
1500
191295
127.53
Road-Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete.
228
21660
95
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
650
44960
69.17
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
228
1917
8.41
Brick edging on both side of the road of M-150 bricks 7cm wide 11cm deep laid with mud mortar including labour & supply of bricks finished to the requred template and in proper alignment and also including dressing and ramming the evcavated earth as directed by the Engineer-in-charge.
0.5
29250
58500
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25
130
205940
1584.16
Concrete with 4cm gauge brick ballast, fine sand of 1.25 F.M and cement, in proportion of 12:6:1 in foundation and under floors, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. as in item 273 above but in proportion 1:4:8
98
313600
3200
Providing and laying Interlocking tile of 60mm to 80mm thick including levelling and dressing of surface up to required level and slopeds filling joints with local sand including cost of labour, T& P etc complete. But excluding cost of material as directed by Engineer in charge.
100
7800
78
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
41
194107
4734.33
Laying CC Road slab 10cm (4") thick consiisting of 1:2:4 cement, coarse sand & approved 2cm gauge hard stone grit and oncluding supply of all materials, labour and T & P etc, spreading the concrete with shpveles, rakes, compacted using plate and needle vibrators and finished in continuous operation including provision of joint filler board 20mm thick as per I.S. 1838 bitumen sealant curing of concrete slab for 14-daysz, and water finishing to lines and grade as per drawing and required for proper completion of work, finished to required template, as directed by Engineer-in charge and including complete shifting of material and concrete and also including 125 micron thick polythene film but excluding cost of metal required for rectification of the sub-grade. As per P.W.D specification
114
741000
6500
Making expansion/contraction joints in C.C Road including approved filler materials in joints. Depth of joints of panels and giving them a uniform finish including supply of all material, labour, tools & plants etc, required for proper complition of work as per direction of Engineer in charge
1000
40000
40
M.S (Yor Steel or Plain) in Plain work such as RCC or RB work including bending for proper shape as necessary including bending for proper complition of the work and including supply of all steel & wastage, bend, hooks and authorised overlapping shall be measured. Thermo-Mechanically Treated bars of grade Fe-500D or more.
41.04
229824
5600
Water screen-Providing and fixing on wall face unplasticised Rigid PVC rainwater pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10 mm gap for thermal expansion.(I)single socketed pipes. 110 mm diameter
3.15
640
203.32
Providing and fixing on wall face unplasticised PVC moulded fitting acessories for unplasticised Rigid PVC rain water pipes confirming to IS-13592 type A including jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion. Coupler110 mm
1
91
91.25
Bend 87.5* 110 mm bend
2
218
109.18
Shoes (plain) 110 mm shoe
1
94
94.61
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
3
454
151.34
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
1
39
39.46
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design. In 75x75 mm deep chase
14
1802
128.74
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
1
164
164.08
12mm. Thick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm, including supply of all materials, labour, tools & plants etc. required for proper completion of the work. As in item 582 above but with cement and fine sand of 1.25 F.M. mortar in 1:6
126.29
17680
140
Add for extra labour to all items of plaster if done in ceiling.
16.48
2554
155
Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior ready mixed paint of clear syNthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950.
7.25
398
55
Same as in item 641 above but for every coat after 1st coat.
7.25
181
25
Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade. Including supply of all material, labour and T & P etc required for proper completion of the work
519.1
21802
42
Same as in item no 660 but for each coat of water proof cement paint after the first two coats to give an even shade.
519.1
7786
15
White washing one coat including supply of all meterial, labour, tool & plants etc. required for proper completion of work as in item no. 671 above but three coats
15
225
15
Canteen-Excavation in foundation in ordinary soil (loamclay orsand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal anddisposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete.
407
38665
95
Providing and injecting chemical emulsion for Preconstructional antitermite treatment and creating a chemical barrier under and alround the column pitswall trenches basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surroundings of pipes and conduit etc. complete(Plinth area of the building at ground floor only shall be measuredas per I.S. 6313 (Part II 1981) Aldrine emulsifiable concentrate or any other approved material such as Hepthachlor or chlordance will be used. The rateof applications of chemical emulsion shall be as Follows :- (1) Treatment for Masonary & foundatiion 5 Liters per Sq.m.(2) Back fill in immediate contract with foundation 7.5 Litres per Sq.M. (3) Treatment of Top surface of plinth filling 5 Litres per Sq.M. (4) Treatment of soil along External Perimerter of Building 7.50 Litres per Sq.M. (5) Treatment of soil under Apron Along extrnal Perimeter 5 litres per sq.M
162.85
21496
132
Concrete with 4cm gauge brick ballast, fine sand of 1.25 F.M and cement, in proportion of 12:6:1 in foundation and under floors, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. as in item 273 above but in proportion 1:4:8
24
76800
3200
Making Plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 course sand :6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick blast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
38
13748
361.79
Mild steel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. Upto plinth
2
11200
5600
Above Plinth
6
33600
5600
R.C.C. work with cement approved coarse sand and 2cm (3/4'') gauge approved stone ballast in the proportion 1:2:4 (1Cement: 6 aggregate) in lintels of doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same necessary with 24BWG binding wire and including necessary centering and shuttering etc. and also including supply of materials labour and tools and plants etc. required for proper completion of the work, strength of the concrete shall not be less than M-150
1.96
13720
7000
As in item 283 above but 1:1.5:3 for slabs.
29
211700
7300
As in item No. 283 above but the lighter beams i.e. having spans above 6 meters (20") but in 1:1.5:3 mix.
14.6
109500
7500
As in item 7 above but in R.C.C. raft foundation and footing with 4cm gauge approved stone ballast.
1.49
10802
7250
M-150 brick work in 1:6 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work.
64
251520
3930
As in item 302 to 307 above but in super structure including necessary cutting and moulding of bricks required and also including honey comb brick work, thickness of walls more than one brick and for extra lab our to above items.
49.11
206753
4210
Supply & fixing of flush Doors commercial quality Conforming to I.S. 2202 Part I (1983) Including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges. Bolts locks, handles,springs. Fitting with necessary screws to be supplied departmentally. (b) 35mm thick
13.13
21008
1600
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm long
12
192
16
100mm long
42
546
13
Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete : 250x10 mm
12
480
40
150x10mm
42
1134
27
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but same as in item no. 502 above but steel Z section window excluding glass panes Openable panel
4.2
29400
7000
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with. 4.0 mm thick glass panes
23.31
18432
790.77
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete. 300x16 mm
12
1777
148.1
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but (ii) Fabrication of Grill/Stairs case railing.
4.86
30861
6350
Mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work.
0.35
2257
6450
Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Profile-E
158
48980
310
Supplying and fixing 6mm (1/4") China White glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all material, labour and tools and plants.
25.2
22680
900
25 mm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 20 mm graded approved stone laid in panels finished with 3 mm. flooring coat of neat cement or cement and marble dust in 5:1 as specified over & including 75 mm. thick base concrete consisting of cement, local sand and brick ballast 40 mm gauge in the proportion of 1:4:8 and removing any over lapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T & P etc. required for proper completion of the work. As item no. 601 above without base concrete.Add in item 601 to 603 and 605 when floors are polished including supply of extra cement, chapra batti, carborndum stone, all other materials, labour and T & P etc. required for proper completion of the work. Marble dust shall be added in the floating coat in ratio of 5:1 (Marble dust and cement) if necessary but no extra amount will be paid for it. This includes final finish with french mansion pollish or other approved polish.
181
78735
435
Providing and fixing on wall face unplasticised Rigid PVC rainwater pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10 mm gap for thermal expansion.(I)single socketed pipes. 110 mm diameter
3
609
203.32
Providing and fixing on wall face unplasticised PVC moulded fitting acessories for unplasticised Rigid PVC rain water pipes confirming to IS-13592 type A including jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion. Coupler 110 mm
1
91
91.25
Bend 87.5* 110 mm bend
2
218
109.18
Shoes (plain) 110 mm shoe
1
94
94.61
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
3
454
151.34
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
1
39
39.46
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
25
3218
128.74
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
1
164
164.08
12mm. Thick plaster with cement mortar in proportion of 1:2 cement & fine sand of 1.25 F.M. As in item 580 above but with cement and fine sand of 1.25 F.M. mortar in 1:4.
525
73500
140
Add for extra labour to all items of plaster if done in ceiling.
300
46500
155
One priming coat & one coat oil distemper on new work including supply of all materials, labour and T & P etc. required for proper completion of the work.
320
15040
47
Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior ready mixed paint of clear syNthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950.
926
50930
55
Same as in item 641 above but for every coat after 1st coat Details of coat for 650 sft. Area.
926
23150
25
Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade. Including supply of all material, labour and T & P etc required for proper completion of the work
204.54
8590
42
Same as in item no 660 but for each coat of water proof cement paint after the first two coats to give an even shade. White washing one coat including supply of all meterial, labour, tool & plants etc. required for proper completion of work
204.54
3068
15
as in item no. 671 above but three coats.
300
4500
15
Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete.
9
855
95
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W./RCC pipes including bed concrete as per standard design: 150 mm dia
20
9028
451.4
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : WC pan ISI marked white solid plastic seat and lid
1
2694
2694.13
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
1
745
745.9
Providing and fixing counter top/under counter Oval shape wash basin withh C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550 x 400 mm withh a single 15 mm C.P. brass pillar tap
1
1876
1876.97
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
1
3802
3802.46
Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto 1meter long with S.S. Triangular plate to european type W.C. Of approved quality and make as approved by engineer in charge.
1
245
245.94
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
1
190
190.68
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Providing and fixing toilet paper holder : C.P. brass
1
354
354.76
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : a)15 mm nomial bore
6
2096
349.44
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
1
517
517.61
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
4
1801
450.34
Providing, fixing, testing and commissioning of C.P brass sink mixer with regular swinging spout, wall mounted with connecting legs & flanges.
1
3225
3225
Providing, fixing, testing and commissioning of C.P brass central hole basin mixer without pop up waste system with 450 mm long braided hoses.
1
3085
3085
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
1
133
133.07
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
1
767
767.51
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia
1
78
78.57
Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore
4
261
65.46
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
1
164
164.08
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
10
2033
203.32
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single Push fit coupler 110 mm diameter
2
182
91.25
Single Tee with door 110x110x110 mm dia
2
350
175.23
Bend 87.5 Deg 110 mm dia
2
218
109.18
Shoe (Plain) 110 mm dia
2
189
94.61
Providing and Fixing on wall face unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 Cement: 4 Coarse sand) and making good the walls etc. complete110 mm dia
4
605
151.34
Providing and Fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less then 440 grams.
2
78
39.46
Supply, Installation, Testing & Commissioning stainless steel cockroch trap consisting of 0.45 mm thick inner and outer cup and 1.00 mm thick top grating (Jali) with ring to be fixed inside ‘P’ traps with cement concrete.
1
875
875
Providing and Fixing uPVC pipes type -B conforming to IS: 13592 for soil, waste and vent pipes including all fittings rubber ring type (plain or with access door) e.g. bends, junctions, cowls, offsets, access pieces, clean out plug, jointing with rubber ring joints with lubricant etc. fixed with cement concrete 1:2:4 blocks complete in all respects. For soil, waste and vent pipes 110 mm OD
20
1200
60
Providing, fixing, jointing and testing in position the following uPVC pipes conforming to IS 4985 of 6 kg/sqcm pressure rating including all fittings, solvent weld joints, testing complete for drainage system cut to required length to be laid under floor including covering all around with cement concrete and making good the same complete as required. 40mm OD (6 kg pressure)
5
50
10
Providing and Fixing 110x110 mm uPVC 'P' trap with 2-3 inlets required size ftting with seal 50 mm of self cleansing design floor/urinal trap without vent suspended with supporting clamp or in sunken portion including cutting and making good the walls and floors wherever required complete in all respects. 110 x110 mm outlet
6
2700
450
Providing and Fixing UPVC floor drain of following size inlet and outlet including cutting and making good the walls and floors wherever required complete in all respects. 110 x63mm outlet
2
220
110
Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole
5
219
43.94
Supply, Installation, Testing & Commissioning C.P cast brass double coat hook fixed to wooden / PVC cleats with C.P. brass screws.
1
505
505
Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with suports, clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-In-Charge. Concealed work including cutting chases and making good the walls etc. 15 mm dia
30
6605
220.18
20 mm dia
10
2574
257.45
25 mm dia
5
1522
304.54
Providing and fixing G.I. pipes complete withh G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work-Exposed on wall and terrace 15mm dia nominal bore
5
814
162.93
20mm dia nominal bore
10
1977
197.79
25mm dia nominal bore
20
4381
219.09
32mm dia nominal bore
25
6867
274.7
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20mm dia nominal bore
1
382
382.76
25mm dia nominal bore
2
826
413.31
32mm dia nominal bore
2
966
483.35
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
1
320
320.38
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
3000
20970
6.99
Providing and fixing forged brass auto air vent valve 10 PN rating including all fitting & accessories.
1
875
875
Constructing masonry Chamber 30x30x60 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
966
966.97
Providing and fixing square-mouth S.W. gully trap class SP-1 complete withh C.I. grating brick masonry chamber withh water tight C.I. cover withh frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type withh common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
2741
1370.57
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter
20
5783
289.16
Providing and laying non-pressure NP2 class (light duty) R.C.C pipes jointed withh stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 150 mm dia. R.C.C. pipe
30
9837
327.93
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) withh R.C.C. top slab withh 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick withh cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished withh a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover withh frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : Withh common burnt clay F.P.S. (non-modular) bricks of class designation 7.5
1
6055
6055.69
Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
0.3
1389
4632.7
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
6594
3297.42
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
16356
16356.49
Wiring point for light with 1.5 sqm. FRLSH PVC insulateded as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose / angle batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash.
30
12326
410.87
Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sqm. FRLSH PVC insulated as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, and two numbers two days piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash.
12
5693
474.46
Wiring point for plug with 1.5 sqm. FRLSH PVC insulated as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, and two numbers two days piano type switch & socket etc. complete in all respect, as directed including matching colour wash.
6
1311
218.66
Wiring point for exhaust fan with 1.5 sqm. FRLSH PVC insulated as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, 15 A piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash.
2
1252
626
Supply and fixing of switch box made up of 16 SWG (1.5 mm) thick M.S. sheet of 100x100x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labours and T&P required for proper completion of work as directed at site by Engineer in charge.
1
50
50.93
Supply and fixing of switch box made up of 16 SWG (1.5 mm) thick M.S. sheet of 150x150x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labours and T&P required for proper completion of work as directed at site by Engineer in charge.
1
77
77.87
Supply and fixing of switch box made up of 16 SWG (1.5 mm) thick M.S. sheet of 175x100x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labours and T&P required for proper completion of work as directed at site by Engineer in charge.
3
222
74.13
Add for light / fan point with modular type switch in place of piano type switch.
42
3927
93.52
Add for plug point with modular switch and socket in place of piano type switch and socket.
6
965
160.85
Add for HPMV / Exhaust fan point with modular type switch in place of piano type switch.
2
187
93.52
Supply and wiring of submain with two number 4 sq.mm. FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia 2mm thick PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one no. 2.5sq mm FRLSH PVC insulated copper conductor cable as earth continuity wire drawn inconduit in all respect.
200
23404
117.02
Supply and wiring of submain with 4 number 10 sq.mm. FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 32 mm dia 2mm thick PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with 2 no. 6 sq mm FRLSH PVC insulated copper conductor cable as earth continuity wire drawn inconduit in all respect.
50
21838
436.76
Supply and fixingand concealing of 25 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirmingto IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid plasteringwith cement sand mortar finishedto the levelwith matchin colour wash including cost of all material labour and T&P etc required for proper completionof the work as per directionsand to the satisfactionof Engineerin charge.
150
7602
50.68
Supply and fixingand concealing of 32 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirmingto IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid plasteringwith cement sand mortar finishedto the levelwith matchin colour wash including cost of all material labour and T&P etc required for proper completionof the work as per directionsand to the satisfactionof Engineerin charge.
20
1243
62.15
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch ,connection etc as required.
6
1538
256.34
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 and 5/6 amps modular socket outlet with shulter and 15/16 amps modular switch connection, etc as required.
8
2607
325.92
S/F of recess / Surface / Pendant mounting round 12 Watt LED downlighter having powder coated die cast aluminium housing with heat sink, driver reflector set complete in all aspects. CAT-A
4
4405
1101.27
S/F of LED Tube light with batten suitabke for opto 1x22W LED tube light complete including tube etc. on surface complete in all respect. CAT-AA
22
18714
850.64
Supply and fixingof water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above protection complete in all respect.
2
2703
1351.89
Supply & fixing Hexagonal fan box made of 16SWG MS sheet incorporatics 10 mm dia 145 rounds bar complete.
12
1302
108.55
Erection and testing of ceiling fan and regulator etc excluding supply of down rod, complete in all respect.
12
761
63.47
Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects.
2
244
122.19
Supply and fixing of 16 gauge MS drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect.
2
1108
554.06
Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps etc. complete 1200 mm sweep
12
34320
2860
Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete 300 mm sweep 900 rpm
2
7840
3920
Supply & burrying of 600mm x 600mm x 6.0mm GI plate, vertically for earthing with its top at least 3 meters below ground level complete with 20 mm GI pipe for watering funnel, 30 cm square CI frame with hinged cover, masonry housing, alternate layers of coke /charcoal and salt at least 150 mm thick alround etc. complete in all respects.
2
7610
3805.12
Supplying & Laying of 25mm x 3mm. G.I. strip for earthing purpose as required complete in all respects.
50
3432
68.65
S&F of 6 Amp to 32 Amp. SPMCB (10 KA). CAT-B
18
2829
157.18
S&F of 63 Amp. 4 Pole MCB (10 KA).CAT-B
1
1179
1179.74
S&F surface/flush mounting 6 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT-B
1
2021
2021.7
Toilet-Excavation in foundation in ordinary soil (loamclay orsand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete.
188.64
17920
95
Providing and injecting chemical emulsion for Preconstructional antitermite treatment and creating a chemical barrier under and alround the column pitswall trenches basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints, surroundings of pipes and conduit etc. complete(Plinth area of the building at ground floor only shall be measuredas per I.S. 6313 (Part II 1981) Aldrine emulsifiable concentrate or any other approved material such as Hepthachlor or chlordance will be used. The rateof applications of chemical emulsion shall be as Follows :- (1) Treatment for Masonary & foundatiion 5 Liters per Sq.m. (2) Back fill in immediate contract with foundation 7.5 Litres per Sq.M. (3) Treatment of Top surface of plinth filling 5 Litres per Sq.M. (4) Treatment of soil along External Perimerter of Building 7.50 Litres per Sq.M. (5) Treatment of soil under Apron Along extrnal Perimeter 5 litres per sq.M
34
4488
132
Providing and laying in Cement concrete 1:4:8 (1cemeent:5find sand :10 graded brick aggregate 40mmnominal size) and curingcomplete,including cost of formwork in foundation and floors.
7.77
24864
3200
2 cm (3/4") thick damp proof course with cement and approved coarse sand 1:2 with and including water proofing materials as ordered by the Engineer in charge in the proportion as specified by the manufactures including supply of all material, labour and T&P etc. required for proper completion of the work including proper curring and shuttering as necessary.
1
200
200
Making Plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 course sand :6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick blast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
9.94
3596
361.79
Mild steel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. Upto plinth
3.99
22344
5600
Above Plinth
6.51
36456
5600
R.C.C. work with cement approved coarse sand and 2cm (3/4'') gauge approved stone ballast in the proportion 1:2:4 (1Cement: 6 aggregate) in lintels of doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same necessary with 24BWG binding wire and including necessary centering and shuttering etc. and also including supply of materials labour and tools and plants etc. required for proper completion of the work, strength of the concrete shall not be less than M-150
0.87
6090
7000
As in item 283 above but 1:1.5:3 for slabs.
5.81
42413
7300
As in item No. 283 above but the lighter beams i.e. having spans upto 6 m
3.45
25875
7500
As in item 7 above but in R.C.C. raft foundation and footing with 4cm gauge approved stone ballast.
0.54
3375
6250
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
50
1707
34.15
M-150 brick work in 1:6 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work.
31.89
125327
3930
As in item 302 to 307 above but in super structure including necessary cutting and moulding of bricks required and also including honey comb brick work, thickness of walls more than one brick and for extra lab our to above items.
26.56
111817
4210
Supply & fixing of flush Doors commercial quality Conforming to I.S. 2202 Part I (1983) Including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges. Bolts locks, handles,springs. Fitting with necessary screws to be supplied departmentally. (b) 35mm thick
13.13
21008
1600
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm long
14
224
16
100mm long
16
208
13
Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete : 250x10 mm
14
560
40
150x10mm
16
432
27
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but same as in item no. 502 above but steel Z section window excluding glass panes Openable panel
0.77
5390
7000
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
2.97
2348
790.77
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 300x16 mm
14
2073
148.1
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but (ii) Fabrication of Grill/Stairs case railing.
1.67
10604
6350
Mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work.
0.25
1612
6450
Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile-E
59
18290
310
Supplying and fixing 6mm (1/4") China White glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all material, labour and tools and plants.
53.83
37053
688.35
25 mm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 20 mm graded approved stone laid in panels finished with 3 mm. flooring coat of neat cement or cement and marble dust in 5:1 as specified over & including 75 mm. thick base concrete consisting of cement, local sand and brick ballast 40 mm gauge in the proportion of 1:4:8 and removing any over lapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T & P etc. required for proper completion of the work. As item no. 601 above without base concrete. Add in item 601 to 603 and 605 when floors are polished including supply of extra cement, chapra batti, carborndum stone, all other materials, labour and T & P etc. required for proper completion of the work. Marble dust shall be added in the floating coat in ratio of 5:1 (Marble dust and cement) if necessary but no extra amount will be paid for it. This includes final finish with french mansion pollish or other approved polish.
15.2
6612
435
Providing and fixing on wall face unplasticised Rigid PVC rainwater pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10 mm gap for thermal expansion.(I)single socketed pipes. 110 mm diameter
3.15
640
203.32
Providing and fixing on wall face unplasticised PVC moulded fitting acessories for unplasticised Rigid PVC rain water pipes confirming to IS-13592 type A including jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion. Coupler110 mm
1
91
91.25
Bend 87.5*110 mm bend
2
218
109.18
Shoes (plain) 110 mm shoe
1
94
94.61
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
3
454
151.34
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
1
39
39.46
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
25
3218
128.74
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
1
164
164.08
12mm. Thick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm, including supply of all materials, labour, tools & plants etc. required for proper completion of the work. As in item 582 above but with cement and fine sand of 1.25 F.M. mortar in 1:6
262.96
36814
140
Add for extra labour to all items of plaster if done in ceiling.
47
7285
155
Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undercorated well surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian paint after throughly brushing the surface free from mortar dropping and other foreign matter and also including the surface materials and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all materials and sand prepared smooth including supply of all materials, labour, tools & plants etc. required for proper
128
6016
47
Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior ready mixed paint of clear syNthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950.
44
2420
55
Same as in item 641 above but for every coat after 1st coat.
44
1100
25
Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade. Including supply of all material, labour and T & P etc required for proper completion of the work
135.39
5686
42
Same as in item no 660 but for each coat of water proof cement paint after the first two coats to give an even shade.
135.39
2030
15
White washing one coat including supply of all meterial, labour, tool & plants etc. required for proper completion of work as in item no. 671 above but three coats.
47
705
15
Wiring point for light with 1.5 sqm. FRLSH PVC insulateded as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose / angle batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash.
20
8217
410.87
Wiring point for exhaust fan with 1.5 sqm. FRLSH PVC insulated as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, 15 A piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash.
4
2504
626
Supply and fixing of switch box made up of 16 SWG (1.5 mm) thick M.S. sheet of 100x100x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labours and T&P required for proper completion of work as directed at site by Engineer in charge.
1
50
50.93
Supply and fixing of switch box made up of 16 SWG (1.5 mm) thick M.S. sheet of 150x150x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labours and T&P required for proper completion of work as directed at site by Engineer in charge.
2
155
77.87
Add for light / fan point with modular type switch in place of piano type switch.
20
1870
93.52
Add for HPMV / Exhaust fan point with modular type switch in place of piano type switch.
4
374
93.52
Supply and wiring of submain with two number 4 sq.mm. FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia 2mm thick PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one no. 2.5sq mm FRLSH PVC insulated copper conductor cable as earth continuity wire drawn inconduit in all respect.
100
11702
117.02
Supply and fixingand concealing of 25 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirmingto IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid plasteringwith cement sand mortar finishedto the levelwith matchin colour wash including cost of all material labour and T&P etc required for proper completionof the work as per directionsand to the satisfactionof Engineerin charge.
50
2534
50.68
S/F of recess / Surface / Pendant mounting round 8 Watt LED downlighter having powder coated die cast aluminium housing with heat sink, driver reflector set complete in all aspects. CAT-A
10
4915
491.54
S/F of recess / Surface / Pendant mounting round 12 Watt LED downlighter having powder coated die cast aluminium housing with heat sink, driver reflector set complete in all aspects. CAT-A
5
5506
1101.27
S/F of 10W LED Tube light (2') with batten complete including tube etc. on surface complete in all respect.
3
2574
858
Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects.
4
488
122.19
Supply and fixing of 16 gauge MS drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect.
4
2216
554.06
Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete 300 mm sweep 900 rpm
4
15680
3920
S&F of 6 Amp to 32 Amp. SPMCB (10 KA). CAT-B
4
628
157.18
S&F of 40 Amp. DP MCB (10 KA). CAT-B
1
534
534.98
S&F surface/flushmounting4 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineerin charge. CAT-B
1
906
906.69
Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete.
18
2484
138.05
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W./RCC pipes including bed concrete as per standard design: 150 mm dia
20
9028
451.4
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.
2
6094
3047.27
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : WC pan ISI marked white solid plastic seat and lid
3
8082
2694.13
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
6
4475
745.9
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
3
15486
5162.2
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
3
8495
2831.95
Providing and fixing counter top/under counter Oval shape wash basin withh C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550 x 400 mm withh a single 15 mm C.P. brass pillar tap
6
11261
1876.97
Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto 1meter long with S.S. Triangular plate to european type W.C. Of approved quality and make as approved by engineer in charge.
5
1229
245.94
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
6
1144
190.68
Providing and fixing toilet paper holder : C.P. brass
5
1773
354.76
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : a)15 mm nomial bore
11
3843
349.44
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
12
5404
450.34
Providing, fixing, testing and commissioning of C.P brass central hole basin mixer without pop up waste system with 450 mm long braided hoses.
6
18510
3085
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
6
798
133.07
Providing and fixing CP Brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge.
6
4605
767.51
Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore
12
785
65.46
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
1
164
164.08
Single Tee with door 110x110x110 mm dia
1
181
181.55
Providing and Fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less then 440 grams.
1
40
40.9
Providing and Fixing uPVC pipes type -B conforming to IS: 13592 for soil, waste and vent pipes including all fittings rubber ring type (plain or with access door) e.g. bends, junctions, cowls, offsets, access pieces, clean out plug, jointing with rubber ring joints with lubricant etc. fixed with cement concrete 1:2:4 blocks complete in all respects. For soil, waste and vent pipes 110 mm OD
35
2100
60
Providing, fixing, jointing and testing in position the following uPVC pipes conforming to IS 4985 of 6 kg/sqcm pressure rating including all fittings, solvent weld joints, testing complete for drainage system cut to required length to be laid under floor including covering all around with cement concrete and making good the same complete as required. 40mm OD (6 kg pressure)
15
150
10
50mm OD (6 kg pressure)
5
50
10
63mm OD (6 kg pressure)
2
40
20
Providing and Fixing 110x110 mm uPVC 'P' trap with 2-3 inlets required size ftting with seal 50 mm of self cleansing design floor/urinal trap without vent suspended with supporting clamp or in sunken portion including cutting and making good the walls and floors wherever required complete in all respects. 110 x110 mm outlet
6
2700
450
Providing and Fixing uPVC floor drain of following size inlet and outlet including cutting and making good the walls and floors wherever required complete in all respects. 110 x63mm outlet
2
220
110
Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole
7
307
43.94
Supply, Installation, Testing & Commissioning C.P cast brass double coat hook fixed to wooden / PVC cleats with C.P. brass screws.
5
2525
505
Providing and fixing END CAP or Clean Out Plug (Ceiling or Floor) with suitable inset keys for opening, male threaded joint with socket fixed to uPVC/SCI pipe complete in all respects.
2
2100
1050
Providing and Fixing 600 mm long Hand rail (Grab bar) for Handicap Toilets with Stainless Steel Screws on wooden cleats complete as per instructions of the engineer-in-charge (As per approved make or equivalent)
1
1540
1540
Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with suports, clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-In-Charge. Concealed work including cutting chases and making good the walls etc. 15 mm dia
35
7706
220.18
20 mm dia
10
2574
257.45
32 mm dia
5
1905
381.06
Providing and fixing G.I. pipes complete withh G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall and terrace 20mm dia nominal bore
15
2966
197.79
25mm dia nominal bore
5
1095
219.09
32mm dia nominal bore
30
8241
274.7
40mm dia nominal bore
10
3513
351.38
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20mm dia nominal bore
1
382
382.76
25mm dia nominal bore
1
413
413.31
32mm dia nominal bore
1
483
483.35
40mm dia nominal bore
1
564
564.35
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
1
320
320.38
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
3000
20970
6.99
Providing and fixing forged brass auto air vent valve 10 PN rating including all fitting & accessories.
1
875
875
Constructing masonry Chamber 30x30x60 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
966
966.97
Providing and fixing square-mouth S.W. gully trap class SP-1 complete withh C.I. grating brick masonry chamber withh water tight C.I. cover withh frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type withh common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
2741
1370.57
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter
20
5783
289.16
Providing and laying non-pressure NP2 class (light duty) R.C.C pipes jointed withh stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 150 mm dia. R.C.C. pipe
30
9837
327.93
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) withh R.C.C. top slab withh 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick withh cement mortar 1:3 (1 cement : 3 coarse sand) finished withh floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished withh a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover withh frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : Withh common burnt clay F.P.S. (non-modular) bricks of class designation 7.5
2
12111
6055.69
Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
0.6
2779
4632.7
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
6594
3297.42
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
16356
16356.49
Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete.
495
47025
95
Providing and injecting chemical emulsion for Preconstructional antitermite treatment and creating a chemical barrier under and alround the column pitswall trenches basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surroundings of pipes and conduit etc. complete(Plinth area of the building at ground floor only shall be measuredas per I.S. 6313 (Part II 1981) Aldrine emulsifiable concentrate or any other approved material such as Hepthachlor or chlordance will be used. The rateof applications of chemical emulsion shall be as Follows :- (1) Treatment for Masonary & foundatiion 5 Liters per Sq.m.(2) Back fill in immediate contract with foundation 7.5 Litres per Sq.M. (3) Treatment of Top surface of plinth filling 5 Litres per Sq.M. (4) Treatment of soil along External Perimerter of Building 7.50 Litres per Sq.M. (5) Treatment of soil under Apron Along extrnal Perimeter 5 litres per sq.M
147.55
19476
132
Providing and laying in Cement concrete 1:4:8 (1cemeent:5find sand :10 graded brick aggregate 40mmnominal size) and curing complete, including cost of formwork in foundation and floors.
26
83200
3200
2 cm (3/4") thick damp proof course with cement and approved coarse sand 1:2 with and including water proofing materials as ordered by the Engineer in charge in the proportion as specified by the manufactures including supply of all material, labour and T&P etc. required for proper completion of the work including proper curring and shuttering as necessary.
1
200
200
Making Plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 course sand :6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick blast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
29
10491
361.79
Mild steel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. Upto plinth
1
5600
5600
Above Plinth
6
33600
5600
R.C.C. work with cement approved coarse sand and 2cm (3/4'') gauge approved stone ballast in the proportion 1:2:4 (1Cement: 6 aggregate) in lintels of doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same necessary with 24BWG binding wire and including necessary centering and shuttering etc. and also including supply of materials labour and tools and plants etc. required for proper completion of the work, strength of the concrete shall not be less than M-150
1.56
10920
7000
As in item 283 above but 1:1.5:3 for slabs.
25
182500
7300
As in item No. 283 above but the lighter beams i.e. having spans above 6 meters(20") but in 1:1.5:3 mix.
19.9
149250
7500
As in item 7 above but in R.C.C. raft foundation and footing with 4cm gauge approved stone ballast.
0.95
6887
7250
M-150 brick work in 1:6 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work.
82
322260
3930
As in item 302 to 307 above but in super structure including necessary cutting and moulding of bricks required and also including honey comb brick work, thickness of walls more than one brick and for extra lab our to above items.
46.9
197449
4210
Supply & fixing of flush Doors commercial quality Conforming to I.S. 2202 Part I (1983) Including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges. Bolts locks, handles,springs. Fitting with necessary screws to be supplied departmentally. (b) 35mm thick
15.44
24704
1600
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125mm long
14
224
16
100mm long
23
299
13
Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete 250x10 mm
14
560
40
150x10mm
46
1242
27
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but same as in item no. 502 above but steel Z section window excluding glass panes Openable panel
1.44
10080
7000
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
20.61
16297
790.77
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm
14
2073
148.1
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but (ii) Fabrication of Grill/Stairs case railing.
4.14
26289
6350
Mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work.
0.35
2257
6450
Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile-E
127
39370
310
Supplying and fixing 6mm (1/4") China White glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all material, labour and tools and plants.
11.41
10269
900
25 mm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 20 mm graded approved stone laid in panels finished with 3 mm. flooring coat of neat cement or cement and marble dust in 5:1 as specified over & including 75 mm. thick base concrete consisting of cement, local sand and brick ballast 40 mm gauge in the proportion of 1:4:8 and removing any over lapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T & P etc. required for proper completion of the work. Add in item 601 to 603 and 605 when floors are polished including supply of extra cement, chapra batti, carborndum stone, all other materials, labour and T & P etc. required for proper completion of the work. Marble dust shall be added in the floating coat in ratio of 5:1 (Marble dust and cement) if necessary but no extra amount will be paid for it. This includes final finish with french mansion pollish or other approved polish.
145
63075
435
Providing and fixing on wall face unplasticised Rigid PVC rainwater pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10 mm gap for thermal expansion.(I)single socketed pipes. 110 mm diameter
3
609
203.32
Providing and fixing on wall face unplasticised PVC moulded fitting acessories for unplasticised Rigid PVC rain water pipes confirming to IS-13592 type A including jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion. Coupler110 mm
1
91
91.25
Bend 87.5* 110 mm bend
2
218
109.18
Shoes (plain) 110 mm shoe
1
94
94.61
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
3
454
151.34
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
1
39
39.46
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
25
3218
128.74
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
1
164
164.08
12mm. Thick plaster with cement mortar in proportion of 1:2 cement & fine sand of 1.25 F.M. As in item 580 above but with cement and fine sand of 1.25 F.M. mortar in 1:4.
565
79100
140
Add for extra labour to all items of plaster if done in ceiling.
225
34875
155
One priming coat & one coat oil distemper on new work including supply of all materials, labour and T & P etc. required for proper completion of the work.
426
20022
47
Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior ready mixed paint of clear syNthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950.
106
5830
55
Same as in item 641 above but for every coat after 1st coat Details of coat for 650 sft. Area.
106
2650
25
Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade. Including supply of all material, labour and T & P etc required for proper completion of the work
393.54
16528
42
Same as in item no 660 but for each coat of water proof cement paint after the first two coats to give an even shade.
393.54
5903
15
White washing one coat including supply of all meterial, labour, tool & plants etc. required for proper completion of work as in item no. 671 above but three coats.
225
3375
15
Wiring point for light with 1.5 sqm. FRLSH PVC insulateded as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose / angle batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash.
30
12326
410.87
Wiring point for two way light with 1.5 sqm. FRLSH PVC insulateded as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, and two numbers two days piano type switch & ceiling rose / angle batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash.
1
516
516.87
Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sqm. FRLSH PVC insulated as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, and two numbers two days piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash.
10
4744
474.46
Wiring point for plug with 1.5 sqm. FRLSH PVC insulated as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, and two numbers two days piano type switch & socket etc. complete in all respect, as directed including matching colour wash.
10
2186
218.66
Wiring point for exhaust fan with 1.5 sqm. FRLSH PVC insulated as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, 15 A piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash.
2
1252
626
Supply and fixing of switch box made up of 16 SWG (1.5 mm) thick M.S. sheet of 100x100x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labours and T&P required for proper completion of work as directed at site by Engineer in charge.
4
203
50.93
Supply and fixing of switch box made up of 16 SWG (1.5 mm) thick M.S. sheet of 150x150x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labours and T&P required for proper completion of work as directed at site by Engineer in charge.
2
155
77.87
Supply and fixing of switch box made up of 16 SWG (1.5 mm) thick M.S. sheet of 175x100x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labours and T&P required for proper completion of work as directed at site by Engineer in charge.
4
296
74.13
Add for light / fan point with modular type switch in place of piano type switch.
40
3740
93.52
Add for 2 way light point with modular type switch in place of piano type switch.
1
172
172.07
Add for plug point with modular switch and socket in place of piano type switch and socket.
10
1608
160.85
Add for HPMV / Exhaust fan point with modular type switch in place of piano type switch.
7
654
93.52
Supply and wiring of submain with two number 4 sq.mm. FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia 2mm thick PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one no. 2.5sq mm FRLSH PVC insulated copper conductor cable as earth continuity wire drawn inconduit in all respect.
200
23404
117.02
Supply and wiring of submain with 4 number 10 sq.mm. FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 32 mm dia 2mm thick PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with 2 no. 6 sq mm FRLSH PVC insulated copper conductor cable as earth continuity wire drawn inconduit in all respect.
50
21838
436.76
Supply and fixingand concealing of 25 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirmingto IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid plasteringwith cement sand mortar finishedto the levelwith matchin colour wash including cost of all material labour and T&P etc required for proper completionof the work as per directionsand to the satisfactionof Engineerin charge.
150
7602
50.68
Supply and fixingand concealing of 32 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirmingto IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid plasteringwith cement sand mortar finishedto the levelwith matchin colour wash including cost of all material labour and T&P etc required for proper completionof the work as per directionsand to the satisfactionof Engineerin charge.
50
3107
62.15
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch ,connection etc as required.
10
2563
256.34
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 and 5/6 amps modular socket outlet with shulter and 15/16 amps modular switch connection, etc as required.
5
1629
325.92
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing of 25A modular socket outlet and 25A modular SP MCB "C" curve including connections painting etc. as required.
5
2104
420.93
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding plate etc .as required. Telephone socket outlet
2
155
77.98
RJ 45 Outlet
2
900
450
Supplying and drawing following pair, 0.5.mm dia FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair
50
813
16.27
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit with termination complete as required 1 Run of cable
50
1374
27.49
Supplying and fixing of the following sheet steel clad wall / recess mounting telephone tag blocks of krone make constructed from 14 SWG sheet steel finished with red oxide coating of two coats of paint with hinged gasketted powder coated door and complete. a) 05 pairs
1
1850
1850
S/F of recess / Surface / Pendant mounting round 12 to 15 Watt LED downlighter having powder coated die cast aluminium housing with heat sink, driver reflector set complete in all aspects. CAT-A
18
19822
1101.27
Supply and fixingof 36 Watt to 46 Watt lumen above 3300 Surface mounting LED Square Celling Fitting having Powder coated die cast aluminiumhousing body with extended heat sink, diffuserof Polycarbonate meterialand driver set complete. CAT-AA
10
43892
4389.28
S/F of LED Tube light with batten suitabke for opto 1x22W LED tube light complete including tube etc. on surface complete in all respect. CAT-AA
2
1701
850.64
Supply & fixing Hexagonal fan box made of 16SWG MS sheet incorporatics 10 mm dia 145 rounds bar complete.
10
1085
108.55
Erection and testing of ceiling fan and regulator etc excluding supply of down rod, complete in all respect.
10
634
63.47
Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects.
2
244
122.19
Supply and fixing of 16 gauge MS drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect.
2
1108
554.06
Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps etc. complete 1200 mm sweep
10
28600
2860
Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete 300 mm sweep 900 rpm
2
7840
3920
Supply & burrying of 600mm x 600mm x 6.0mm GI plate, vertically for earthing with its top at least 3 meters below ground level complete with 20 mm GI pipe for watering funnel, 30 cm square CI frame with hinged cover, masonry housing, alternate layers of coke /charcoal and salt at least 150 mm thick alround etc. complete in all respects.
2
7610
3805.12
Supplying & Laying of 25mm x 3mm. G.I. strip for earthing purpose as required complete in all respects.
100
6865
68.65
S&F of 6 Amp to 32 Amp. SPMCB (10 KA). CAT-B
24
3772
157.18
S&F of 63 Amp. 4 Pole MCB (10 KA).CAT-B
1
1179
1179.74
S & F surface/Flush mounting 8ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT-B
1
3160
3160
El. BOQ IC-Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete.
11
1045
95
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W./RCC pipes including bed concrete as per standard design: 150 mm dia
20
9028
451.4
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : WC pan ISI marked white solid plastic seat and lid.
1
2694
2694.13
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
1
745
745.9
Providing and fixing counter top/under counter Oval shape wash basin withh C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550 x 400 mm withh a single 15 mm C.P. brass pillar tap
1
1876
1876.97
Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto 1meter long with S.S. Triangular plate to european type W.C. Of approved quality and make as approved by engineer in charge.
1
245
245.94
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
1
190
190.68
Providing and fixing toilet paper holder : C.P. brass
1
354
354.76
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : a)15 mm nomial bore
1
349
349.44
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
2
900
450.34
Providing, fixing, testing and commissioning of C.P brass central hole basin mixer without pop up waste system with 450 mm long braided hoses.
1
3085
3085
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
1
133
133.07
Providing and fixing CP Brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge.
1
767
767.51
Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore
2
130
65.46
Single Tee with door 110x110x110 mm dia
1
175
175.23
Providing and Fixing uPVC pipes type -B conforming to IS: 13592 for soil, waste and vent pipes including all fittings rubber ring type (plain or with access door) e.g. bends, junctions, cowls, offsets, access pieces, clean out plug, jointing with rubber ring joints with lubricant etc. fixed with cement concrete 1:2:4 blocks complete in all respects. For soil, waste and vent pipes 110 mm OD
10
600
60
Providing, fixing, jointing and testing in position the following uPVC pipes conforming to IS 4985 of 6 kg/sqcm pressure rating including all fittings, solvent weld joints, testing complete for drainage system cut to required length to be laid under floor including covering all around with cement concrete and making good the same complete as required. 40mm OD (6 kg pressure)
2
20
10
Providing and Fixing 110x110 mm uPVC 'P' trap with 2-3 inlets required size ftting with seal 50 mm of self cleansing design floor/urinal trap without vent suspended with supporting clamp or in sunken portion including cutting and making good the walls and floors wherever required complete in all respects. 110 x110 mm outlet
1
450
450
Providing and Fixing uPVC floor drain of following size inlet and outlet including cutting and making good the walls and floors wherever required complete in all respects. 110 x63mm outlet
1
110
110
Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole
2
87
43.94
Supply, Installation, Testing & Commissioning C.P cast brass double coat hook fixed to wooden / PVC cleats with C.P. brass screws.
1
505
505
Providing and Fixing 600 mm long Hand rail (Grab bar) for Handicap Toilets with Stainless Steel Screws on wooden cleats complete as per instructions of the engineer-in-charge (As per approved make or equivalent)
1
1540
1540
Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with suports, clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-In-Charge. Concealed work including cutting chases and making good the walls etc. 15 mm dia
10
2201
220.18
20 mm dia
5
1287
257.45
Providing and fixing G.I. pipes complete withh G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall and terrace 20mm dia nominal bore
5
988
197.79
25mm dia nominal bore
25
5477
219.09
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25mm dia nominal bore
2
826
413.31
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
1
320
320.38
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
6990
6.99
Providing and fixing forged brass auto air vent valve 10 PN rating including all fitting & accessories.
1
875
875
Constructing masonry Chamber 30x30x60 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
966
966.97
Providing and fixing square-mouth S.W. gully trap class SP-1 complete withh C.I. grating brick masonry chamber withh water tight C.I. cover withh frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type withh common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
1370
1370.57
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter
20
5783
289.16
Providing and laying non-pressure NP2 class (light duty) R.C.C pipes jointed withh stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 150 mm dia. R.C.C. pipe
10
3279
327.93
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) withh R.C.C. top slab withh 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick withh cement mortar 1:3 (1 cement : 3 coarse sand) finished withh floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished withh a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover withh frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : Withh common burnt clay F.P.S. (non-modular ) bricks of class designation 7.5
1
6055
6055.69
Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
0.3
1389
4632.7
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
3297
3297.42
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
16356
16356.49
Theme Park- Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
2100
92442
44.02
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
2100
670425
319.25
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.
7000
19460
2.78
Fine dressing of the ground.
7000
14420
2.06
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
2100
62391
29.71
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
7000
1370180
195.74
Preparation of mounds of various size and shape by available excavated/supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
2100
538482
256.42
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) Tree Plants
100
408
4.08
Shrubs Plant
500
1030
2.06
Planting of topiary plants at site i/c watering and removal of unserviceable material's as per direction of officer in charge.
10
100000
10000
Making of sculpture with foundation and other similar work with stone or RCC design with max height of 3m, length & width of 2m o or in a same preportion with length and width if height is less than 3 m from natural ground level including material, labour, carriage, finishing etc complete as per direction of design of architect and officer-in-charge.
3
540000
180000
PATHWAY-Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres including Brick edging on both side of the road of M-150 bricks 7cm wide 11cm deep laid with mud mortar including labour & supply of bricks finished to the requred template and in proper alignment and also including dressing and ramming the evcavated earth including Providing and laying Interlocking tile of 60mm to 80mm thick including levelling and dressing of surface up to required level and slopeds filling joints with local sand including cost of labour, T& P etc complete. But excluding cost of material as directed by Engineer in charge.
2100
655200
312
Guard Room-Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc complete.
33.46
3312
99
Providing and injecting chemical emulsion for Preconstructional antitermite treatment and creating a chemical barrier under and alround the column pitswall trenches basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints, surroundings of pipes and conduit etc. complete(Plinth area of the building at ground floor only shall be measuredas per I.S. 6313 (Part II 1981) Aldrine emulsifiable concentrate or any other approved material such as Hepthachlor or chlordance will be used. The rateof applications of chemical emulsion shall be as Follows :- (1) Treatment for Masonary & foundatiion 5 Liters per Sqm. (2) Back fill in immediate contract with foundation 7.5 Litres per Sq.M. (3) Treatment of Top surface of plinth filling 5 Litres per Sq.M. (4) Treatment of soil along External Perimerter of Building 7.50 Litres per Sq.M. (5) Treatment of soil under Apron Along extrnal Perimeter 5 litres per sq.M
4.95
653
132
Providing and laying in Cement concrete 1:4:8 (1cemeent:5find sand :10 graded brick aggregate 40mmnominal size) and curing complete, including cost of form work in foundation and floors.
1.1
3795
3450
Making Plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 course sand :6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick blast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
5.34
1931
361.79
Mild steel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. Upto plinth
0.06
306
5100
Above Plinth
0.35
1785
5100
R.C.C. work with cement approved coarse sand and 2cm (3/4'') gauge approved stone ballast in the proportion 1:2:4 (1Cement: 6 aggregate) in lintels of doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same necessary with 24BWG binding wire and including necessary centering and shuttering etc. and also including supply of materials labour and tools and plants etc. required for proper completion of the work, strength of the concrete shall not be less than M-150
0.23
1658
7212
As in item 283 above but 1:1.5:3 for slabs.
1.36
11301
8310
As in item No. 283 above but the lighter beams i.e. having spans above 6 meters(20") but in 1:1.5:3 mix.
0.61
4697
7700
M-150 brick work in 1:6 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work.
5.22
22931
4393
As in item 302 to 307 above but in super structure including necessary cutting and moulding of bricks required and also including honey comb brick work, thickness of walls more than one brick and for extra lab our to above items.
4.85
24298
5010
Supply & fixing of flush Doors commercial quality Conforming to I.S. 2202 Part I (1983) Including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges. Bolts locks, handles,springs. Fitting with necessary screws to be supplied departmentally. (b) 35mm thick
1.58
2607
1650
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm long
2
57
28.6
100mm long
5
113
22.65
Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete : 250x10 mm
2
128
64
150x10mm
5
220
44.1
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but same as in item no. 502 above but steel Z section window excluding glass panes Openable panel
0.12
840
7000
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
1.71
1352
790.77
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm
2
296
148.1
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but (ii) Fabrication of Grill/Stairs case railing.
0.26
1482
5700
Mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work.
0.35
2065
5900
Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile-E
14
4340
310
Providing and laying Ceramic glazed floor tiles / Anti skid tile of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
3.06
2106
688.35
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
0.63
469
744.8
Providing and fixing on wall face unplasticised Rigid PVC rainwater pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10 mm gap for thermal expansion.(I)single socketed pipes. 110 mm diameter
3
609
203.32
Providing and fixing on wall face unplasticised PVC moulded fitting acessories for unplasticised Rigid PVC rain water pipes confirming to IS-13592 type A including jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion. Coupler 110 mm
1
91
91.25
Bend 87.5* 110 mm bend
2
218
109.18
Shoes (plain) 110 mm shoe
1
94
94.61
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
110 mm
3
454
151.34
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
1
39
39.46
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
7
901
128.74
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
1
164
164.08
12mm. Thick plaster with cement mortar in proportion of 1:2 cement & fine sand of 1.25 F.M. As in item 580 above but with cement and fine sand of 1.25 F.M. mortar in 1:4.
48.17
6069
126
Add for extra labour to all items of plaster if done in ceiling.
10
1370
137
One priming coat & one coat oil distemper on new work including supply of all materials, labour and T & P etc. required for proper completion of the work.
18
815
45.3
Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior ready mixed paint of clear syNthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950.
9
534
59.4
Same as in item 641 above but for every coat after 1st coat Details of coat for 650 sft. Area.
9
253
28.2
Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade. Including supply of all material, labour and T & P etc required for proper completion of the work
30.22
1459
48.3
Same as in item no 660 but for each coat of water proof cement paint after the first two coats to give an even shade.
30.22
516
17.1
White washing with lime to give an even shade : New work (three or more coats)
10
172
17.25
ELECTRICAL WORK GUARD ROOM-Wiring point for light with 1.5 sqm. FRLSH PVC insulateded as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose / angle batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash.
1
410
410.87
Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sqm. FRLSH PVC insulated as multistand single core copper conductor cable in heavy PVC conduit pipe concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, and two numbers two days piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed including matching colour wash.
1
474
474.46
Supply and fixing of switch box made up of 16 SWG (1.5 mm) thick M.S. sheet of 100x100x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labours and T&P required for proper completion of work as directed at site by Engineer in charge.
2
101
50.93
Add for light / fan point with modular type switch in place of piano type switch.
2
187
93.52
Supply and wiring of submain with two number 4 sq.mm. FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia 2mm thick PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one no. 2.5sq mm FRLSH PVC insulated copper conductor cable as earth continuity wire drawn inconduit in all respect.
50
5851
117.02
Supply and fixingand concealing of 25 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirmingto IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid plasteringwith cement sand mortar finishedto the levelwith matchin colour wash including cost of all material labour and T&P etc required for proper completionof the work as per directionsand to the satisfactionof Engineerin charge.
25
1267
50.68
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch ,connection etc as required.
1
256
256.34
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 and 5/6 amps modular socket outlet with shulter and 15/16 amps modular switch connection, etc as required.
1
325
325.92
S/F of LED Tube light with batten suitabke for opto 1x22W LED tube light complete including tube etc. on surface complete in all respect. CAT-AA
1
850
850.64
Supply & fixing Hexagonal fan box made of 16SWG MS sheet incorporatics 10 mm dia 145 rounds bar complete.
1
108
108.55
Erection and testing of ceiling fan and regulator etc excluding supply of down rod, complete in all respect.
1
63
63.47
Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps etc. complete 1200 mm sweep
10
28600
2860
S&F of 6 Amp to 32 Amp. SPMCB (10 KA). CAT-B
4
628
157.18
S&F of 40 Amp. DP MCB (10 KA). CAT-B
1
534
534.98
S&F surface/flushmounting4 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineerin charge. CAT-B
1
906
906.69
Civil work for Gazebo-Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete.
79
7505
95
Providing and laying in Cement concrete 1:4:8 (1cemeent:5find sand :10 graded brick aggregate 40mmnominal size) and curingcomplete,including cost of formwork in foundation and floors.
5
16000
3200
Mild steel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. Above Plinth
7
39200
5600
R.C.C. work with cement approved coarse sand and 2cm (3/4'') gauge approved stone ballast in the proportion 1:2:4 (1Cement: 6 aggregate) in lintels of doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same necessary with 24BWG binding wire and including necessary centering and shuttering etc. and also including supply of materials labour and tools and plants etc. required for proper completion of the work, strength of the concrete shall not be less than M-150 As in item No. 283 above but the lighter beams i.e. having spans above 6 meters(20") but in 1:1.5:3 mix.
5.8
43500
7500
M-150 brick work in 1:6 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work.
44
172920
3930
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but (ii) Fabrication of Grill/Stairs case railing.
1
6300
6300
Mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work.
36.45
235102
6450
25 mm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 20 mm graded approved stone laid in panels finished with 3 mm. flooring coat of neat cement or cement and marble dust in 5:1 as specified over & including 75 mm. thick base concrete consisting of cement, local sand and brick ballast 40 mm gauge in the proportion of 1:4:8 and removing any over lapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T & P etc. required for proper completion of the work. Add in item 601 to 603 and 605 when floors are polished including supply of extra cement, chapra batti, carborndum stone, all other materials, labour and T & P etc. required for proper completion of the work. Marble dust shall be added in the floating coat in ratio of 5:1 (Marble dust and cement) if necessary but no extra amount will be paid for it. This includes final finish with french mansion pollish or other approved polish.
135
91800
680
Supply and fixing galvanized corrugated iron roofing 24 B.W.G in position including supply of all materials, labour, tools and plants etc. required for proper completion of the work and including wastage
90
81000
900
12mm. Thick plaster with cement mortar in proportion of 1:2 cement & fine sand of 1.25 F.M. As in item 580 above but with cement and fine sand of 1.25 F.M. mortar in 1:4.
86
12040
140
Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior ready mixed paint of clear syNthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950.
250
13750
55
Same as in item 641 above but for every coat after 1st coat Details of coat for 650 sft. Area.
250
6250
25
Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade. Including supply of all material, labour and T & P etc required for proper completion of the work
94.6
3973
42
Same as in item no 660 but for each coat of water proof cement paint after the first two coats to give an even shade.
94.6
1419
15
Gazebo landscaping-Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
94.5
4159
44.02
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
94.5
30169
319.25
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.
630
1751
2.78
Fine dressing of the ground.
630
1297
2.06
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
630
123316
195.74
Brick edging on both side of the road of M-150 bricks 7cm wide 11cm deep laid with mud mortar including labour & supply of bricks finished to the requred template and in proper alignment and also including dressing and ramming the evcavated earth as directed by the Engineer-in-charge.
0.5
29250
58500
OAT AND STAG-EExcavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. andincluding filling watering and ramming of excavated earthinto the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer incharge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete.
2362
224390
95
Providing and laying in Cement concrete 1:4:8 (1cemeent:5find sand :10 graded brick aggregate 40mmnominal size) and curing complete, including cost of form work in foundation and floors.
53
169600
3200
Making Plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 course sand :6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick blast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
110.25
39887
361.79
Mild steel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. Upto plinth & Above Plinth
390
2184000
5600
R.C.C. work with cement approved coarse sand and 2cm (3/4'') gauge approved stone ballast in the proportion 1:2:4 (1Cement: 6 aggregate) in lintels of doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same necessary with 24BWG binding wire and including necessary centering and shuttering etc. and also including supply of materials labour and tools and plants etc. required for proper completion of the work, strength of the concrete shall not be less than M-150
0.86
6020
7000
As in item 283 above but 1:1.5:3 for slabs.
65.18
475814
7300
As in item No. 283 above but the lighter beams i.e. having spans above 6 meters(20") but in 1:1.5:3 mix.
97.1
728250
7500
As in item 7 above but in R.C.C. raft foundation and footing with 4cm gauge approved stone ballast.
113.03
706437
6250
As in item 283 above but in R.C.C column in 1:1.5:3
20.9
167200
8000
M-150 brick work in 1:6 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work.
159.34
626206
3930
As in item 302 to 307 above but in super structure including necessary cutting and moulding of bricks required and also including honey comb brick work, thickness of walls more than one brick and for extra lab our to above items.
70.91
298531
4210
Supply & fixing of flush Doors commercial quality Conforming to I.S. 2202 Part I (1983) Including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges. Bolts locks, handles,springs. Fitting with necessary screws to be supplied departmentally. (b) 35mm thick
12.6
20160
1600
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm long
12
192
16
100mm long
12
156
13
Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete 250x10 mm
12
480
40
150x10mm
24
648
27
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but same as in item no. 502 above but steel Z section window excluding glass panes Openable panel
0.78
5460
7000
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
4.32
3416
790.77
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm
12
1777
148.1
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but (ii) Fabrication of Grill/Stairs case railing.
15.03
95440
6350
Mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work.
0.7
4515
6450
Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile-E
31
9610
310
25 mm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 20 mm graded approved stone laid in panels finished with 3 mm. flooring coat of neat cement or cement and marble dust in 5:1 as specified over & including 75 mm. thick base concrete consisting of cement, local sand and brick ballast 40 mm gauge in the proportion of 1:4:8 and removing any over lapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T & P etc. required for proper completion of the work. As item no. 601 above without base concrete. Add in item 601 to 603 and 605 when floors are polished including supply of extra cement, chapra batti, carborndum stone, all other materials, labour and T & P etc. required for proper completion of the work. Marble dust shall be added in the floating coat in ratio of 5:1 (Marble dust and cement) if necessary but no extra amount will be paid for it. This includes final finish with french mansion pollish or other approved polish
793
344955
435
12mm. Thick plaster with cement mortar in proportion of 1:2 cement & fine sand of 1.25 F.M. As in item 580 above but with cement and fine sand of 1.25 F.M. mortar in 1:4.
571
79940
140
Add for extra labour to all items of plaster if done in ceiling.
300
46500
155
One priming coat & one coat oil distemper on new work including supply of all materials, labour and T & P etc. required for proper completion of the work.
333
15651
47
Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior ready mixed paint of clear syNthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950.
290
15950
55
Same as in item 641 above but for every coat after 1st coat Details of coat for 650 sft. Area.
290
7250
25
Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade. Including supply of all material, labour and T & P etc required for proper completion of the work
385.38
16185
42
Same as in item no 660 but for each coat of water proof cement paint after the first two coats to give an even shade.
385.38
5780
15
White washing one coat including supply of all meterial, labour, tool & plants etc. required for proper completion of work as in item no. 671 above but three coats.
300
4500
15
Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete.
512
48640
95
Providing and laying in Cement concrete 1:4:8 (1cemeent:5find sand :10 graded brick aggregate 40mmnominal size) and curing complete, including cost of formwork in foundation and floors.
44.41
142112
3200
Making Plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 course sand :6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick blast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
61.8
22358
361.79
Mild steel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. Upto plinth & Above Plinth
17.02
95312
5600
R.C.C. work with cement approved coarse sand and 2cm (3/4'') gauge approved stone ballast in the proportion 1:2:4 (1Cement: 6 aggregate) in lintels of doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same necessary with 24BWG binding wire and including necessary centering and shuttering etc. and also including supply of materials labour and tools and plants etc. required for proper completion of the work, strength of the concrete shall not be less than M-150
0.1
700
7000
As in item 283 above but 1:1.5:3 for slabs.
5.13
37449
7300
M-150 brick work in 1:6 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work.
85.3
335229
3930
As in item 302 to 307 above but in super structure including necessary cutting and moulding of bricks required and also including honey comb brick work, thickness of walls more than one brick and for extra lab our to above items.
13.78
58013
4210
Supply & fixing of flush Doors commercial quality Conforming to I.S. 2202 Part I (1983) Including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges. Bolts locks, handles,springs. Fitting with necessary screws to be supplied departmentally. (b) 35mm thick
2.1
3360
1600
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm long
2
32
16
100mm long
1
13
13
Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete : 250x10 mm
2
80
40
150x10mm
2
54
27
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but same as in item no. 502 above but steel Z section window excluding glass panes Openable panel
0.1
700
7000
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
0.54
427
790.77
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm
2
296
148.1
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but (ii) Fabrication of Grill/Stairs case railing.
22.22
141097
6350
Mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work.
0.5
3225
6450
Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile-E
5
1550
310
Supplying and fixing 6mm (1/4") China White glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all material, labour and tools and plants.
516
464400
900
Providing and fixing on wall face unplasticised Rigid PVC rainwater pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10 mm gap for thermal expansion.(I)single socketed pipes. 110 mm diameter
1
203
203.32
Providing and fixing on wall face unplasticised PVC moulded fitting acessories for unplasticised Rigid PVC rain water pipes confirming to IS-13592 type A including jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion. Coupler 110 mm
1
91
91.25
Bend 87.5* 110 mm bend
2
218
109.18
Shoes (plain) 110 mm shoe
1
94
94.61
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
3
454
151.34
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
1
39
39.46
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
21
2703
128.74
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
1
164
164.08
12mm. Thick plaster with cement mortar in proportion of 1:2 cement & fine sand of 1.25 F.M. As in item 580 above but with cement and fine sand of 1.25 F.M. mortar in 1:4.
134
18760
140
Add for extra labour to all items of plaster if done in ceiling.
36
5580
155
One priming coat & one coat oil distemper on new work including supply of all materials, labour and T & P etc. required for proper completion of the work.
60.36
2836
47
Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior ready mixed paint of clear sy Nthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950.
173.16
9523
55
Same as in item 641 above but for every coat after 1st coat Details of coat for 650 sft. Area.
173.16
4329
25
Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade. Including supply of all material, labour and T & P etc required for proper completion of the work
66.4
2788
42
Same as in item no 660 but for each coat of water proof cement paint after the first two coats to give an even shade.
66.4
996
15
White washing one coat including supply of all meterial, labour, tool & plants etc. required for proper completion of work as in item no. 671 above but three coats.
36
540
15
Water screen-Excavation in foundation in ordinary soil (loamclay or
sand) including lift up to 1.5m and lead up to 30m. and
including filling watering and ramming of excavated earth
into the space between the building and the sides of
foundation trenches or into the plinth and removal and
disposal of surplus earth ad directed by the Engineer in
charge up to a distance of 30m. from the foundation
trenches including all T&P phowarah and basket etc.
complete.
70
6650
95
Providing and injecting chemical emulsion for Preconstructional antitermite treatment and creating a chemical barrier under and alround the column pitswall trenches basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surroundings of pipes and conduit etc. complete(Plinth area of the building at ground floor only shall be measuredas per I.S. 6313 (Part II 1981) Aldrine emulsifiable concentrate or any other approved material such as Hepthachlor or chlordance will be used. The rateof applications of chemical emulsion shall be as Follows :- (1) Treatment for Masonary & foundatiion 5 Liters per Sq.m.
(2) Back fill in immediate contract with foundation 7.5 Litres per Sq.M. (3) Treatment of Top surface of plinth filling 5 Litres
per Sq.M. (4) Treatment of soil along External Perimerter of
Building 7.50 Litres per Sq.M. (5) Treatment of soil under Apron Along extrnal Perimeter 5 litres per sq.M
11.97
1580
132
Providing and laying in Cement concrete 1:4:8 (1cemeent:5find sand :10 graded brick aggregate 40mmnominal size) and curingcomplete,including cost of formwork in foundation and floors.
5.2
16640
3200
Mild steel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. Upto plinth
1.44
8064
5600
Above Plinth
2.5
14000
5600
R.C.C. work with cement approved coarse sand and 2cm (3/4'') gauge approved stone ballast in the proportion 1:2:4 (1Cement: 6 aggregate) in lintels of doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same necessary with 24BWG binding wire and including necessary centering and shuttering etc. and also including supply of materials labour and tools and plants etc. required for proper completion of the work, strength of the concrete shall not be less than M-150 As in item 283 above but 1:1.5:3 for slabs.
2.06
15038
7300
As in item No. 283 above but the lighter beams
i.e. having spans upto 6 m
1.44
10800
7500
M-150 brick work in 1:6 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for
proper completion of work.
25.76
101236
3930
As in item 302 to 307 above but in super structure including necessary cutting and moulding of bricks required and also including honey comb brick work, thickness of walls more than one brick and for extra lab our to above items.
13.69
57634
4210
Supply & fixing of flush Doors commercial quality Conforming to I.S. 2202 Part I (1983) Including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges. Bolts locks, handles,springs. Fitting with necessary screws to be supplied departmentally. (b) 35mm thick
1.58
2520
1600
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm long
2
32
16
100mm long
1
13
13
Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete : 250x10 mm
2
80
40
150x10mm
1
27
27
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but Same as in item no. 502 above but steel Z section window excluding glass panes Openable panel
0.07
492
7000
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
0.27
213
790.77
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm
2
296
148.1
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but (ii) Fabrication of Grill/Stairs case railing.
0.5
3175
6350
Mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work.
0.25
1612
6450
Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile-E
7
2170
310
Supplying and fixing 6mm (1/4") China White glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all material, labour and tools and plants.
13.28
11952
900
Dancing Aqua-Suppling, installing, testing & commissiong at site of Musical Fountain frame, grouting stands, water effects, nozzles brass, bronze, aluminium alloy-epoxy coated. Manifolds, delivery and distribution pipe work, accessories,mounting stands,GM Control valves etc, nozzles. comprising of the following water effects: UFA Jet 16, Center 01, Sunburst 01,Single Oscillating 02, peacock 05, Mesh Ring 04, Central Dome 01, Dancing peacock 06, Inside drop ring 02, Outside drop Ring 02 NOZZLE MAKE: Proprietary, Feeder Pipes make Galvanised steel - Jindal/Bansal, Grid pipes make Aluminium alloy – Jindal/Hindalco/Nalco
1
1443200
1443200
Solenoid Valve made of Bronze( Premierworld/Water works/Wet Design)
1
533000
533000
Submersible Pumpsets- For Musical fountain 15hpx 2nos( totalling 30hp), mounting frames, strainers, etc.Make - KSB/Texmo/Super including Pump Panel
1
451000
451000
Sound system:2 x 1000w( Total 2000W )RMS Amplifier(Crown/Equal) with 8x300W RMS speaker( Custom built with P.Audio Driver/Ahuja)
1
1018388
1018388.34
Total 106nos. of LED lights Waterproof luminaries with array of high output of LEDs housed in compact enclosure of stainless steel body. Toughened glass with elastomer seal. Special plastic cable gland compact socket head fasteners and mounting bracket are all of stainless steel. Make - ( Premierworld/Water works/Wet Design)
1
1955700
1955700
Electrical Panel MCC Panels: 1) Made of 2 mm thick sheet steel enclosure, foot mounted cubicle type, epoxy powder coated (Siemens grey). Front doors are hingeable & lockable with the body.
2) Degree of protection – IP 54.
3) All cable entry from bottom.
4) All doors and gland plates have spongy rubber gasket.
5) Panels should have the main incoming feeder, bus bar chamber, instrument chamber, pump feeder chamber and cable ally chamber. a) Main incoming chamber consist of one number rated TP MCCB, make Schneider/ L&T / Siemens / GE / Equivalent. b) Bus bar Chamber consisting of rated current. 415 V 50 Hz, with heat sink and rated CT, Make Kappa / AEE / Equivalent. c) Instrument Chamber consisting of digital / analogue Ammeter & Voltmeter with selector switches and phase indication lamp and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit. d) Every pump feeder consisting of short circuit protection through HRC TPN Main Switch (GE/ L&T/ Siemens/ Schneider) , overload protected through thermal overload relay (GE/ Schneider/ L&T/ Siemens), Single Phasing protected by single phase preventor (Make: Minilec), rated star & delta contactors and star delta timer (GE/ L&T/ Schneider / Siemens), ammeter, voltmeter, selector switches, rated CT, overload indication & pump OFF-ON push button and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit.
6) Cable ally consisting of rated terminals (Elmex / Phonix).
1
676172
676172
Power DB: 1) Made of 2 mm thick sheet steel enclosure, foot mounted cubicle type, epoxy powder coated (Siemens grey). Front doors are hingeable & lockable with the body. 2) Degree of protection – IP 54. 3) All cable entry from bottom. 4) All doors and gland plates have spongy rubber gasket. 5) Panels should have the main incoming feeder, bus bar chamber, instrument chamber, incoming cable termination chamber and out outgoing cable termination chamber. a) Main incoming feeder consisting of rated capacity TPN HRC fuse switch combination, make: Schneider/ L&T / Siemens / GE / Equivalent. b) Bus bar chamber consisting of rated capacity aluminium bus bar with heat sink, rated capacity CT, make AEE / Kappa. c) Instrument Chamber consisting of digital / analogue ammeter and voltmeter with selector switch, phase indicating lamp and required rated SP MCB, make Schneider/ L&T / Siemens / GE / MDS for control circuit
1
511680
511680
Solenoid valve&Light panels:
1 Sol valve panel made of 2mm thick sheet steel enclosure, foot mounted type, epoxy powder coated (Siemen’s grey). Front doors are hingeable & lockable with the body.
2) Degree of protection – IP 54.
3) All cable entry from bottom.
4) All doors and gland plates have spongy rubber gasket.
5) Panel should have the main incoming feeder, bus bar chamber, instrument and component chamber and transformer chamber. a) Main incoming chamber consist of one number rated TP MCCB or MCB, ( make: MDS / Schneider/ L&T / Siemens / GE / Equivalent ). b) Bus bar Chamber consisting of rated current aluminium bus, with heat sink. c) Instrument Chamber consisting of digital / analogue Ammeter & Voltmeter with selector switches and phase indication lamp and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit. .
c) Component chamber should have every channel protected by SP MCB, make – MDS / Siemens / Schneider/ L&T and every channel operated by the mini contactor (Make: Moeller / Schneider / GE) or PLA relay, 2 CO / 3 CO. Terminals (Elmex) are provided for every channel and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit.
.
1
603028
603028
Cable network consisting of Copper conductor flexible cable of different sizes total not less than 1.5sqmm(Approx-3500m)
1
372280
372280
Controller Rack: Consisting of electronic control card interfacing with computer and our above panels converting digital input to analogue output with necessary electrical / electronic safety protection item and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit..
1
533000
533000
Ist year operation(under warranty of 12 months)
1
393600
393600
Supplying installing testing & commissioning at of fountain work including Water Sheet (10M x 3M) with foam bubbler foundation Water Sheet (10M x 3M) with foam bubbler foundation Pump set with cable Electrical Panel for light stand & Cable Light with light stand & cable. This will include all work complete as per architect & Engineer-in-charge and cost is exclusive of civil work.
1
1615597
1615597.74
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements