Ghaziabad Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Ghaziabad Development Authority - GDA Tender
Civil And Construction
Electrical and Electronics
Eprocure
Opening Date27 Dec 2018
Closing Date7 Jan 2019
Tender Amount₹ 4,25,78,104
Costs
EMD
₹ 8,52,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_GDAUP_287916_1Bid Award Id
ViewTender No
239/Horticulture/2018 Date 18-12-2018 (S.n.-11)Tender Authority
Ghaziabad Development Authority ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Supply and Installation of Musical Fountain with Multimedia Show at Swarnjayanti Park Indirapuram
Supply and Installation of Musical Fountain with Multimedia Show at Swarnjayanti Park Indirapuram
Supply and Installation of Musical Fountain with Multimedia Show at Swarnjayanti Park Indirapuram
BOQ Items
As in item 283 above but in R.C.C. T-beam & slab roof and R.C.C. column/wall.
102
-
7500
M.S. (for steel or plain) in plain work such as R.C.C. or R.B. work including bending for proper shape as necessary including bending for proper complition of the work and including supply of all steel & wastage, bend, hooks, and authorised overlapping shalf be measured,
377
-
5600
M-150 Brick Work in 1:6 cement & fine sand 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work.
19
-
3950
As in item 303 to 307 above but in superstucture including mecessary cutting & moulding of brick as required thickness of walls not to be less than 11/2 brick. Add extra labour to above items.
17
-
4230
Supplying and stacking at site from 8 km distance including loading and unloading.Good earth
707
-
257
Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge.
480
-
1441
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm per coat
201
-
451
For horizontal surface one coat @1.10 kg per sqm.
585
-
349
Providing and fixing mosaic tiles of Bisazza / Palladio / equivalent of approved shade & quality onto bands etc. on walls, floor and other similar locations including pasting the same on wall, floor & filling joints with appropriate grout of Laticrete or equivalent complete as per detailed drawings, complete as per direction of Engineer-in-charge.
785
-
1506
Providing and fixing artificial green grass supplied in 100cm x 100cm panels (1m2) etc. complete as per detailed drawings, complete as per direction of Engineer-in-charge.
180
-
194.17
Excavation in foundation in ordinary soil (Loam, clay of sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches of into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine can not reach/move). for building work only.
706
-
95
Sand Filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour T&P etc. required for the proper complition of the work. Saplings of girth upto 30 cms. Measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared
6
-
460
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour. Tools & plants etc. required for proper completion of the work.As in item 279 above but in proportions of 8:4:1
36
-
5200
2 cm thick Damp Proof Course with cement and approved coarse sand 1:2 with and including water proofing as ordered by the Engineer incharge in the proportion as by the manufecture including supply of all materials, labour, Tools 7 Plants etc. required for proper completion of the work and including proper curing & shutterings as nesessary. as an item 360 above but 2.5 cm thick and of cement concrete consisting of 1 part cement, 11/2 parts approved coarse sand and 3 parts approved 10 mm. graded stone grit and including water proofing material as ordered by the Endineer incharge in the proportion as specified by the manufecturing.
14
-
300
Painting on DPC or over rrof slab one coat of air blown bitumen S-35(60/70) or S-90(80/100) grade @ one Kg/Sqm including cost of fuel wood other materials, labour T&P etc. required for proper completion of work.
14
-
55
Same as item 362 above but subsequent coat of bitumen @ 0.7 Kg/Sqm.
14
-
45
M.S. (for steel or plain) in plain work such as R.C.C. or R.B. work including bending for proper shape as necessary including bending for proper complition of the work and including supply of all steel & wastage, bend, hooks, and authorised overlapping shalf be measured,
118
-
5600
Cast cement concrete door sills, chaukhats, boundary posts shelves and similar small work with cement, approved coarse sand and 2 cm gauge stone grit in proportions of 1:2:4 excluding its fixing and binding the same with 24 B.W. G.G.I. binding wire, moulds, all materials labour, tools & plants etc. required for proper completion of the work. the rate excludes making of drip course which shall be paid extra.
1
-
6700
R.C.C work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:2:4 in lintels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shell be paid extra.
2
-
7000
As in item 283 above but in R.C.C. Raft foundation and footing with 4 cm. gauge stine ballast.
41
-
6250
As in item 283 above but in R.C.C. T-beam & slab roof and R.C.C. column/wall.
70
-
7500
M-150 Brick Work in 1:6 cement & fine sand 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work.
12
-
3950
As in item 303 to 307 above but in superstucture including mecessary cutting & moulding of brick as required thickness of walls not to be less than 11/2 brick. Add extra labour to above items.
17
-
4230
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc, complete:300 x 16mm
5
-
200
Provinding and fixing aluminium tower bolts ISI marked anodised (anodic costing not less than grade AC 10 as per IS : 1868) transparent to dyed to required colour of shade with necessery screws etc. complee: 300 x 10mm
5
-
90
Provinding and fixing aluminium tower bolts ISI marked anodised (anodic costing not less than grade AC 10 as per IS : 1868) transparent to dyed to required colour of shade with necessery screws etc. complee: 250x10 mm
5
-
75
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc, complete. 125mm
17
-
47
M.S or iron work of small aizes and section such as holding down bolts, hold fast, tie roads grating etc. wrought to required from including supply of dteel boltd, nuts wastage etc. and their fixing required for prpper completion of the work. Same as in item 502 above but in M.S. Grills & Stair case railing
29
-
6350
Providing and fixing 1mm thick M.S. sheet gauge door with frame of 40x40x6mm (11/2"x11/2"x 1/4") angle iron3.15mm (1/8") thick M.S. gusset plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15" length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete.Using M.S. angles 40x40x6mm (11/2"x11/2"x 1/4") for diagonal bracings.
2
-
6300
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
20
-
69
Supply and fixing of Kota stone in flooring 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:2 cement & coarse sand mortar and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.As an item no. New item (1) above but 25 mm thivk.
29
-
1000
Supply and fixing 10 to 12 mm thick Kota stone tiles in skirting or dado laid with 1:2 cement and approved coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tool and plant etc. required for proper completion of the work.
3
-
920
Supply and fixing Vitrified tiles (Kajaria, Bell, J & J or Somani) in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand and mortar finished with white cement slurry, jointing, and polishing complete including supply of all materials, labour and T&P complete.
3
-
1300
Making Khurras 45cms X 45 cms with cc 1:2:4 average 5 cms thick including supply of all materials, labour, T&P etc. required for proper completion of work.
4
-
115
12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm. Including supply of all materials, labour, tools & plants etc. required for proper completion of the work
44
-
160
As in item (582) above but woth cement and fine sand of 1.25 fineness modulas mortar in 1:6
72
-
140
Providing wall putty on new surface with approved quality material of Berger/J.K/Birla or Similar make 2 coats.
113
-
60
Distempering (first coat) with oil bound distemper of approved brand and distemper of approved brand and manufecture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufavture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris of approved synthetic materials and sand papered smooth including supply of all materials, ;abourd, Tool & Plants etc. required for proper completion of the work. As in item (649) above but for every coat after the first coat.
115
-
65
providing and fixing "brick coba" 12 mm thick laid with M-150 class brick bat coba 7.50cm. thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spearding cement slurry mixed with aerclic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm X 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner dhall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ by weight & including s/o all material. labour T&P etc. for
66
-
900
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
25
-
475
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab over 0.50 sqm
3
-
2890
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work
7
-
142
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
6
-
218
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
82
-
3890
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand)
104
-
4633
Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough acing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge.
1119
-
1441
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper
5
-
36
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
184
-
66
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
76
-
330
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
43
-
379
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
4
-
778
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
9
-
936
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.Upto 5mm depth and 5 mm width
33
-
60
DISTRIBUTION BOARDS :S & I of 4Way TPN, DB for distribution of power &Light having below mentioned switchgears (Earth bar inside these DB should be insulated from the body) 1 no, 40A, FP, 30mA RCCB incomer 12 Nos. 10-25A, SP MCB, 'C' Series
2
-
12022
SITC Of free standing suitable for out door installation dust & vermin proof feeder pillar made out or CRCA sheet ,required hard ware,duly painted by either two coats of zink /red oxide primer followwed by two coats of synthetic enmel paint for powder coating in grey or required shade after rising. The feeder pillar having Neoprene rubber gasket of not less than 3mm thickness,hingled door with locking arrangement,gland plate.Thickness of sheet shall not be less than 2mm.Sheet metal works shall be processed with seven tank process,bus bar and having the following components.One (1) No. 63A 4P MCB (10KA) with 63A 4P contactor (AC 3 Category with 230V Control Coil) using 1 No. 24 hour astronomical time switch on Auto/Manual arrangement with Auto/Manual selection switch, ON/OFF Push Buttons, Indication lamps & Control fuses etc .Electrolytic high conductivity Copper three pole and neutral busbars rated at 100 amps having a maximum current density of 1 amp per sq mm insulated with heat shrinkable PVC sleeves Six (6) Nos. 16 A 4P 10KA MCBs. Six (6) Nos. 6- 25 A SP 10KA MCBs.Full Set as above
2
-
40282
SITC Of free standing suitable for out door installation dust & vermin proof feeder pillar made out or CRCA sheet ,required hard ware,duly painted by either two coats of zink /red oxide primer followwed by two coats of synthetic enmel paint for powder coating in grey or required shade after rising. The feeder pillar having Neoprene rubber gasket of not less than 3mm thickness,hingled door with locking arrangement,gland plate.Thickness of sheet shall not be less than 2mm.Sheet metal works shall be processed with seven tank process,bus bar and having the following components.1 no, 125A, FP, MCCB incomer 4 Nos. 63A, 4P MCB, 'C' Series Full Set as above
1
-
42549
Street light with LED (Light Emitting Diode) system power: 70W, luminous flux of luminaire 7000lm, 3000K, neutral white, CRI 80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient LEDs , direct light emission, clea glass, housing in die-cast aluminium, polyester powder coated grey applied over a 5-stage pre-treatment, integral electronic control gear Protection class I, IP65
L = 391mm, B = 186mm, H = 78mm, PD(Pole Dia.) = 50-70 mm
22
-
8058.55
Pole light with LED(Light Emitting Diode) system power: 27W, luminous flux of luminaire 2400lm, colour temperature of 4000K, neutral white, CRI80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours; energy efficient LEDs, direct light emission, housing in aluminium polyester powder coated black, opal diffuser, electronic control gear Protection class I, IP66 Ø = 608mm, P(Ø)= 82mm, H = 300mm
42
-
8059
5W LED steplight Steplight equipped with High Power LEDs IP 65 integral luminaire Compact, robust, non corrosive aluminium body, ROHS Complients, Designed to install directly on wall, Avialble in 3000K & 4000K
60
-
4337.25
Supply and erection of 9 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70mm and bottom dia A/F 155mm, made of 3 mm thick sheet along with base plate of size 260 x 260 x 16mm, small door opening for junction box mouting and suitable size foundation bolts with template and all complete as required ( but without pole collar), (Valmont Make.)
22
-
16271.05
3.5 CX35sq mm AL conductor XLPE insulated FRLS armoured cable
50
-
212
4 CX25sq mm Copper conductor XLPE insulated FRLS armoured cable
100
-
1060
4 CX16sq mm Copper conductor XLPE insulated FRLS armoured cable
700
-
645
4 CX10sq mm Copper conductor XLPE insulated FRLS armoured cable
400
-
447.45
3.5 CX35sq mm Copper conductor XLPE insulated FRLS armoured cable
2
-
743
4 CX25sq mm Copper conductor XLPE insulated FRLS armoured cable
4
-
721
4 CX16sq mm Copper conductor XLPE insulated FRLS armoured cable
44
-
619
4 CX10sq mm Copper conductor XLPE insulated FRLS armoured cable
84
-
619
Providing and fixing 8SWG copper wire on surface or in recess for loop earthing along with existing surface / recessed conduit /submain wiring/cable as required.
2400
-
187
Primary light point i.e. one light controlled by switch.
4
-
1264
Secondary light points
54
-
845
One 6 Amps, 2/3 pin socket controlled by one 6 Amps switch.
2
-
1436
Primary light point i.e. one light controlled by one MCB.
12
-
945
Wiring for 6/16 Amp primary power outlet on RAW power with 4 Sq mm FRLS PVC insulated stranded copper conductor wires in recessed/surface MS conduit including cutting/filling chases, providing conduit with conduit accessories, saddles, supply and fixing of 6 pin 6/16Amps shuttered switched socket with internal wiring in G.I. box, earthing of 3rd pin with PVC insulated, green colour 2.5 Sq mm copper wire, complete with all accessories as required. ( Not more than 2 outlets shall be connected to one circuit)
2
-
2114
Conduiting: Supply and installation of following sizes of black enamelled MS conduit on surface/steel structures including all accessories, GI fishwire, fixing hardware etc including, chasing the wall/floor and plastering the chased portion and making good the damages including fittings e.g. bends tee, inspection bends etc as required.25 mm dia
50
-
147
Conduiting: Supply and installation of following sizes of black enamelled MS conduit on surface/steel structures including all accessories, GI fishwire, fixing hardware etc including, chasing the wall/floor and plastering the chased portion and making good the damages including fittings e.g. bends tee, inspection bends etc as required.32 mm dia
50
-
175
EARTHING STATIONS:Supply, installation, testing and commissioning of maintinance free Earthing Station consisting of 1 No. UL listed and CPRI tested copper bonded steel electrode of 14.2 mm dia. with minimum coating thickness of 250 microns and length of 3 meters tested according to IEC 62561-2 with 1425 RTC SS Universal Clamp of Size 175X50X3 mm. Earth enhancing compound minimum 25 kgs/station shall be filled in the 100mm augered hole surrounding to the electrode. The FRP / cast iron Under Floor Earth Inspection Pit shall be provided on top of the electrode. The rate shall include excavation of earth, filling with back fill compound, exothermic welding and earth pit marking. Make OBO Bettermann / furse / KLK ( 2 nos. For DG set neutral and 1 no. Server Body, 2 nos. for MDB / Dg body)
4
-
11453
Earthing Strip/Wires:Supply, installation, testing and commissioning of following sizes of GI/ Copper strip/wire clamped to walls, cable trays, cables in recess or surface etc for equipment/ System /Lightning protection earthing complete as required including inter connection between length at joints, all fixing accessories saddles, clamps etc and other fixing hardware material as required for proper installation. 25 x 3 mm strip ( for Body earthing)
50
-
187
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. Internal Work - Exposed on Wall 15 mm nominal outer dia pipes.
5
-
119.4
20 mm nominal outer dia pipes.
20
-
153.55
25 mm nominal outer dia pipes.
10
-
188.53
32 mm nominal outer dia pipes.
10
-
256.05
40 mm nominal outer dia pipes.
25
-
343
50 mm nominal outer dia pipes.
30
-
500.4
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings.This includes jointing of pipes & fittings with one step CPVC solvent cement,testing,refilling and testing of joints complete as per direction of engineer in charge. Internal Work - Exposed on Wall20 mm nominal outer dia pipes.
50
-
130.04
25 mm nominal outer dia pipes.
10
-
169.55
32 mm nominal outer dia pipes.
10
-
226.4
40 mm nominal outer dia pipes.
25
-
293.29
50 mm nominal outer dia pipes.
200
-
450.7
Fixing water meter and stop cock in G.I pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).
1
-
259.77
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):25 mm nominal bore
3
-
413
32 mm nominal bore
3
-
483.35
40 mm nominal bore
3
-
564.35
50 mm nominal bore
6
-
723.83
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),i/c necessary excavation foundation concrete 1:5:10 (1 Cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 Cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standarddesign: a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
10172
Providing and fixing gun metal non- return valve of approved quality (screwed end). 50 mm dia nominal bore-vertical
2
-
1043
Supplying and fixing C.I. cover without frame for manholes: 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg.
4
-
2643.65
Providing and fixing C.P.brass bib cock of approved quality with nozzle for hose connection.Jaquar model no.CON-049KN. 15 mm nominal bore.
18
-
845
Supplying, installing, testing & commissioning vertical inline pumps with S.S. casing, S.S. impeller. mechanical seal, S.S. Shaft directly coupled to motor suitable for operation on 400/440 volts, 3 phase 2900 RPM. TEFC electronic motor mounted on a common channel baseplate 150mm dia pressure gauge, G.M. gauge, G.M. isolation cock and cement concrete foundation with plaster.Flexicon rubber expansion bellow shall be provided at discharge header of each hydro. pump.Control panel with pressure switch, electrical wiring, cabling from panel to pumps, level controller complete with all accessories.GI Heavy duty (Class-C) suction and discharge header with butterfly valve at suction & discharge side of each pump & non return valve at discharge of each pumpSet of accessories such as Pressure Switches, Connecting Power & Control Cabling etc.'Hydropneumatic system for Garden water supply system--For feeding garden water to all garden taps with 1 No. Precharged vessel of minimum capacity of 300 Lts with interchangeable butyl rubber membrane connected to outlet header with necessary flanges, gaskets, isolation valves, nuts, bolts etc. complete. Cyclic operations shall be provided for the pumps.Variable Speed.Location-Pump room near underground water tank.Garden Water Pumps(to lift water from
1
-
317843
Providing & fixing fully submersible sump pumps for dewatering with C.I casing & shaft suitable for operation on 400 / 440 V pH 50 cycle A/C power supply.Sump Pumps( For basement Drainage ) Cost shall include electrical control panel(1no. for each set of 2 pumps) with wiring,cabelling,control cabelling & all accessories. Control panel shall be compatible with BMS control system. Cyclic operations shall be provided for each set of 2 pumps. Location- Inside drainage sump in basement Flow rate(each pump)=3Lps, Head(each pump) =10 Mts Location- Inside drainage sump in basement
1
-
122696
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kinds of soil
600
-
138
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidated each deposited layer by ramming, watering, etc. and disposing of surplus excavated soils directed, within a lead of 50m. Pipes, cables etc. exceeding 80mm dia. but not exceeding 300 mm dia.
60
-
73.31
Filling available excavated earth ( excluding rock) in trenches,plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering,lead upto 50m and lift upto 1.5m
15
-
94.95
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.300 mm. dia. RCC Pipes
30
-
477
250 mm. dia. RCC Pipes
200
-
439
150 mm. dia. RCC Pipes
40
-
330
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 150 mm diameter S.W. Pipe
40
-
592.8
250 mm diameter S.W. Pipe
200
-
811.2
300 mm diameter S.W. Pipe
30
-
936
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand )with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregrate 40mm nominal size ), inside palstering 12 mm thick with cement mortar 1:3 (1 Cement : 3 coarse sand) finished with floating coat of neat cement & making channels in cement concrete 1:2:4(1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80cm and 45cm deep including C.I. cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame 15 kg).With common burnt clay FPS(non modular) bricks of class designation 7.5.
2
-
6935
Inside size 120x90cm and 90cm deep including C.I. cover with frame (medium duty) 500mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg)Inside size 120x90cm and 90cm deep including C.I. cover with frame (medium duty) 500mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg)With common burnt clay FPS(non modular) bricks of class designation 7.5.
2
-
11639
Extra for depth for manholes Size 90x80 cmWith common burnt clay FPS(non modular) bricks of class designation 7.5.
1
-
5215
Size 120x90 cmWith common burnt clay FPS(non modular) bricks of class designation 7.5.
1
-
6230
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls , floors with cement concrete 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) cement plastered on both sides with cement motor 1:3 ( 1 cement :3 coarse sand ) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter
1
-
351.27
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263mm and width as 165mm with minimum 112 mm space between protruded legs having 2mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistant test as per specification and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manhole with 30x20x15 cm cement concrete block 1:3:6 (1cement : 3coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
40
-
296.8
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 ( 1 cement :4 coarse sand) including 500x450mm pre-cast R.C.C. horizontal grating with frame complete as per standard design: With common burnt clay FPS(non modular) bricks of class designation 7.5.
16
-
4337
Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 ( 1 cement :4 coarse sand) with pre-cast R.C.C. vertical grating complete as per standard design: With common burnt clay FPS(non modular) bricks of class designation 7.5.
3
-
4663
Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 ( 1 cement :4 coarse sand) including 500x450mm pre-cast R.C.C. horizontal grating with frame & vertical grating complete as per standard designWith common burnt clay FPS(non modular) bricks of class designation 7.5.
1
-
7828
Supplying & filling, sepreading & leveling stone boulders of size range 5cm to 20cm, in the recharge pit, in the required thickness, for all leads & lifts, all complete, for all depths, as per direction of engineer-in-charge.
5
-
2304
Supplying & filling, sepreading & leveling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in the required thickness, for all leads & lifts, all complete, as per direction of engineer-in-charge.
5
-
2630
Supplying & filling, sepreading & leveling coarse sand of size range 1.5mm to 20mm, in the recharge pit, in the required thickness over gravel layer, for all leads & lifts, all complete, as per direction of engineer-in-charge.
5
-
2630
S/F of Ball Joint Nozzle Complete in all respect.
360
-
576.78
S/F of Sun Brust Complete in all respect.
1
-
84324.11
S/f of BJRC Gun Metal Complete in all respect.
25
-
11982.14
S/F of Brass Gate valve 1" complete in all respect.
16
-
1425
S/F of Cross swing Ass. Bend
12
-
29146.42
S/F of UFA Jet 20 MM Dia x 4 " long (Brass)
24
-
10171.42
S/f of Dancing Head with arms Alluminum 4" dia
6
-
4996.42
S/F of 2' dia Alluminum Ring
4
-
2259.82
S/F of 4' dia Alluminum Ring
2
-
5115.17
S/F of 6" X50' Long manifold for UFA jets
1
-
137761.6
S/F of Alluminum Channel 4" x 260 ' (Frame )
1
-
285515.18
S/F Channel Stand (GI) 30"
60
-
1559.82
S/F of Water Screen (18 M X 6 M) Brass /SS (Including designing ,fabrication and require fitting)(Premierworld)
1
-
184871
S/F of 40 MM GI Tee
100
-
228.57
S/F of 40 MM GI Elbow
150
-
166.07
S/F of EMA complete with Gayer box and step rollar 1/2" GI Pipe and EMA Fitting.
1
-
191533
Solenoid Valve made of Bronze 65 mm ( Premierworld/Water works/Wet Design)
45
-
19419.64
Solenoid coil 220v complete in all respect.(Premierworld)
45
-
3910.72
S/f of Falaxible Cable 1.5 mm x 2 core
3500
-
37.5
S/F of 15 HP Open well Submersible pump set Three phase MAKE- Crompton
2
-
53292.85
S/F of 20 HP Open well Submersible pump set Three phase MAKE- Crompton
2
-
57441.96
S/F of C.I. Reflux Valve (Non-Return Valve) 150 MM Make -Sant
4
-
16160.71
S/F of Gate valve (Bronze) 32 MM
8
-
2022.32
S/F of GI Pipe 40 MM
80
-
420.53
S/f of Submersible Flat Cable 10 MM X 3 Core
500
-
353.57
S/f of Falaxible Cable 1.5 mm x 4 core
3200
-
67.86
S/f MS Galvanize Manifold Size 6" X 6'(Design,fabricating and require fitting)
1
-
62337.5
S/f MS Galvanize Manifold Size 4" X 3'(Design,fabricating and require fitting)
2
-
46276.78
Synchronizing of Music with Water pattern (Including Programmer Fee and programmed song (For One Min)
30
-
12704.46
S/F of Four channel amplifier (Crown/Equal) with AVB connectivity. Power per channel (all channels driven): 1250W @ 2 ohms. 1250W @ 4 ohms. 1250W @ 8 ohms. 625W @ 16 ohms. 1250W @ 70/100V. Bridged power: 2500W @ 4 ohms. 2500W @ 8 ohms. 2500W @ 16 ohms. 2500W @ 70/100V.
2
-
404617
S/F of Flaxible Cable 1.5 MM X 2 Core.
400
-
35.71
S/f of Powered speaker 300 watt (Ahuja)PSX -1200
8
-
12410.71
Synchronizing Laser gun with software and Programming according water Show(Including Programmer fee ).(Per Min.)
45
-
20239.28
Synchronizing Video Projector with software and Programming according water Show.(Per Min.)
30
-
19017.85
Total 107nos. of LED lights Waterproof luminaries with array of high output of LEDs housed in compact enclosure of stainless steel body. Toughened glass with elastomer seal. Special plastic cable gland compact socket head fasteners and mounting bracket are all of stainless steel. Make - ( Premierworld/Water works/Wet Design)
107
-
20089.29
Electrical Panel: MCC Panels: 1) Made of 2 mm thick sheet steel enclosure, foot mounted cubicle type, epoxy powder coated (Siemens grey). Front doors are hingeable & lockable with the body.
2) Degree of protection – IP 54.
3) All cable entry from bottom.
4) All doors and gland plates have spongy rubber gasket.
5) Panels should have the main incoming feeder, bus bar chamber, instrument chamber, pump feeder chamber and cable ally chamber. a) Main incoming chamber consist of one number rated TP MCCB, make Schneider/ L&T / Siemens / GE / Equivalent. b) Bus bar Chamber consisting of rated current. 415 V 50 Hz, with heat sink and rated CT, Make Kappa / AEE / Equivalent. c) Instrument Chamber consisting of digital / analogue Ammeter & Voltmeter with selector switches and phase indication lamp and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit. d) Every pump feeder consisting of short circuit protection through HRC TPN Main Switch (GE/ L&T/ Siemens/ Schneider) , overload protected through thermal overload relay (GE/ Schneider/ L&T/ Siemens), Single Phasing protected by single phase preventor (Make: Minilec), rated star & delta contactors and star delta timer (GE/ L&T/ Schneider / Siemens), ammeter, voltmeter, selector switches, rated CT, overload indication & pump OFF-ON push button and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit.
6) Cable ally consisting of rated terminals (Elmex / Phonix).
1
-
1104910.71
Power DB: 1) Made of 2 mm thick sheet steel enclosure, foot mounted cubicle type, epoxy powder coated (Siemens grey). Front doors are hingeable & lockable with the body. 2) Degree of protection – IP 54. 3) All cable entry from bottom. 4) All doors and gland plates have spongy rubber gasket. 5) Panels should have the main incoming feeder, bus bar chamber, instrument chamber, incoming cable termination chamber and out outgoing cable termination chamber. a) Main incoming feeder consisting of rated capacity TPN HRC fuse switch combination, make: Schneider/ L&T / Siemens / GE / Equivalent. b) Bus bar chamber consisting of rated capacity aluminium bus bar with heat sink, rated capacity CT, make AEE / Kappa. c) Instrument Chamber consisting of digital / analogue ammeter and voltmeter with selector switch, phase indicating lamp and required rated SP MCB, make Schneider/ L&T / Siemens / GE / MDS for control circuit
1
-
741071.43
Solenoid valve&Light panels:
1 Sol valve panel made of 2mm thick sheet steel enclosure, foot mounted type, epoxy powder coated (Siemen’s grey). Front doors are hingeable & lockable with the body.
2) Degree of protection – IP 54.
3) All cable entry from bottom.
4) All doors and gland plates have spongy rubber gasket.
5) Panel should have the main incoming feeder, bus bar chamber, instrument and component chamber and transformer chamber. a) Main incoming chamber consist of one number rated TP MCCB or MCB, ( make: MDS / Schneider/ L&T / Siemens / GE / Equivalent ). b) Bus bar Chamber consisting of rated current aluminium bus, with heat sink. c) Instrument Chamber consisting of digital / analogue Ammeter & Voltmeter with selector switches and phase indication lamp and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit. .
c) Component chamber should have every channel protected by SP MCB, make – MDS / Siemens / Schneider/ L&T and every channel operated by the mini contactor (Make: Moeller / Schneider / GE) or PLA relay, 2 CO / 3 CO. Terminals (Elmex) are provided for every channel and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit.
.
1
-
965625
Design, supply, installation & commissioning of Sunlite with computer system and consoles (licensed software for lifetime validity to run the complete show)Controller Rack: Consisting of electronic control card interfacing with computer and our above panels converting digital input to analogue output with necessary electrical / electronic safety protection item and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit.
1
-
541964.28
Design, supply, installation & commissioning of Supply and installation ofLCD projector (PT-DZ870U)having total light output of 8500 lumens and integrating seamlessly to produce a continuous show/spectacle. (Epson/Hitachi/Panosonic)
1
-
1619821.43
Design, supply, installation & commissioning of LASER : Output – 5w generated by pure diodes only (in the interests of reliability and robustness DPSS diode with intermediate wavelength conversion is not acceptable).
Red 637nm – 2 watt
Green 520nm – 1 watt
Blue 445nm – 2watt
Beam dia – 3.5mm
Beam divergence (full angle) - 1mrad
Scanning rate – not less than 60kpps at 60°max
Air cooled, enclosure to IP54 and suitable for ambient operating temperature of 10 to 40C.
Adjustable power control
XY axis invert
XY size and positioning
Important: since the laser is to be used for public shows safety is extremely important and laser must conform to EN 60825-1 (European Union) and FDA (USA) regulations and include a scan fail safety mode that will blank laser beam in the event of any scanner malfunction).
1
-
1294785.71
Software :Description: LD2000 is a professional level software, used for creating the highest quality laser showson the planet. It is a complete system, and comes with the LD2000 software, and QM2000 hardware.
1
-
294196.43
Shooting and editing movie according theme (Including Director Fees,Camraman,Supporting Staff etc and Studio charges) Per Min
11
-
170500
Prepared Animated Show according Theme (Including Director fees and studio charges) Per Min.
20
-
236500
Tricling water effect (In cluding 7.5 HP X 2 No Pump,Panel,15 NO LED light with Panel and other require fittings.
1
-
464812.5
2nd year operation and maintenance of Fountain
1
-
1141591.07
3rd year operation and maintenance of fountain
1
-
1712387.54
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements