Ghaziabad Development Authority Tender

Providing and applying tack Coat 0.30 kg/sqm with bitumen 80/100 using emulsion pressure on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRTH specification clause No. 503 complete in all respects. (A.R)

Providing and laying 40mm. Thick bituminous concrete with 100-120 TPH (Tonnes per hour) batch type HMP (Hot Mix plant) producing an average output of 75 tonne per hour using crushed aggregates of grading I,(13 mm nominal size) premixed with bituminous binder of 60/70 @ 5% of weight of mix and hydrated lime filler @ 2% of weight of aggregate, transporting the hot mix to work site, laying with a hydrostatic power finisher with sensor control to the required grade, level and alignment, rolling with smoth wheeled roller 8-10 tonne for initial break down rolling, vibrator roller 8 tonne for intermediate rolling and finish folling with 608 tonne smooth wheeled tandom roller to achieve the desired compaction and including supply of all material, labour T&P etc. required for proper completion of the work as per clause 508 of MORT & H specification and as per direction of Engineer-in-charge (A.R.) Specification clause 5096.

Brick edging on both side of the road of 150 bricks 7 cm wide&11 cm deep laid in mud mortar etc in proper slope and camber SOR NO- 765

Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. MORTH 803 (8.13)

Supply & Laying of 80mm thick rubber molded cement grey / ordinary red inter locking cement concrete paver blocks confirming 15658/2000 of approved shape as directed by E/1. Manufactured by high pressure and control vibration machine with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The compressive strength of concrete paver block shall not be less than 30 MPA (M-30) including preparation of bed with local fine sand and also leveling and dressing of surface up to required level and sloped filling joints with local fine sand including .cost of material, labour, T&P and all complete as per direction of E/1 and as per approved specifications.(A.R.)

Disposal of surplus earth upto 3 km including unloading A.R.

DRAIN WORK Excavation in foundation in ordinary soil (loam clay or sand) including Lift up to 1.5 meter (5ft.) and lead up to 30m (100 ft.) and including filling, watering and raming of excavated earth into the trenches or into the space between the bulding and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30m (100 ft) from the foundation trenches UPPWD SOR 2022/251(a)

Cement Concrete 4cm. gauge approved stone ballast coarse sand and cement in proportion 8:4:1 including supply of all materials, labour, T&P etc. required for proper completion of the work (SI. No. 281/2022).

RCC work with cement approved coarse sand and 2 cm (3/4) guage approved stone ballast in the proportions of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W. G.G.I binding wire and including neccessary centering and shuttering etc. and also including supply of all materials. labour and T & P etc. required for proper completion of the work excluding cost of binding wire. sor 2022 Raft SOR 2022 ITEM NO- 287 A

Wall SOR 2022 ITEM NO- 289

Slab SOR 2022 ITEM NO- 284 NEW

Construction of weep holes with 110 mm dia (OD) RPVC pipe (IS : 4985) (6 kg/sqcm) in the RCC wall at an interval of 1.50 m horizontally & vrtically at the time of casting of wall with all materials labours etc required ofr proper completion of the work. sanctioned rate to file of Talab khasra no-1174

M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorized overlapping shall be measured and including cost of binding wire. (S.I. No. 504/SOR/22)