Food Corporation Of India Tender

3X 2.5 sq mm

Supplying and fixing of 25mm dia size of medium class steel conduit along with accessories in surface/ recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying of 18 to 22 watt LED polycarbonate batten with 100 lumens/watt. (Confoming to relevent BIS/IS standard or equivalent)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required conforming to relevant BIS/IS codes.

Supplying and fixing metal box of sizes 200 mm X 150 mm X 75 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 200 mm X 150 mm X 75 mm

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way , Double door

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

Supply of PVC insulated PVC sheathed cable of 1.1KV grade armoured Underground aluminum conductor cable as reqd confirming to ISI –7098 part I with up to date amendments) of the following size -

4x10 sqmm

2x10 sqmm

Supplying and fixing following rating,240/415 volts , "C" curve , miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with onnetions, testing and commissioning etc. as required. (Conforming to IS- IEC60898-1

Single Pole 16A

Double Pole 32A

TPN, 63 A

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required.Upto 35 sq mm

Supply , Installation, Testing & Commissioning of LED Street Light fitting with mandatory driver set having die cast aluminium body and lenses suitable for 90 watt, minimum 110 Lm/watt to 125 Lm/watt or Luminous should not be less than 9900, SPD with internal surge protection upto 4KV and External surge protection upto 10KV,Line voltage protection upto 8Hrs with autorestart with IP66 protection having minimum 2 years warranty conforming to IS-16103-2012 or equivalent with upto date amendments as per direction of engineer in charge .

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (conforming to IS 12943 (1990) or equivalent with upto date amendments)

4 X 10 sq. mm (25mm)

2x 10 sq. mm (19mm)

Earthing with G.I Earth pipe 4.5 metre long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering of pipe. Etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. (conforming to relevant BIS/IS codes)

Supplying , installation , testing and commissioning of cubical type panel with size (1.3x1.25x.4 Mtr) suitable for operation at 415 (+/-) 6% Volts,50Hz,3 Phase 4 Wire system made out from CRCA sheet steel 2.0 mm and covers shall be cold rolled sheet thickness not less than 1.6mm fabricated factory finished followed-42 by powder coated painting & provided with gaskit to make dust vermin proof degree of IP , hinged type openable door , loaking arrangement , detachable gland plate , connection , interconnections with suitable size (400 Amp capacity) 4 strip high conductivety elctrical aluminium (ALU) busbar codifies in red,yellow,blue and black colour and PVC insulated copper conductor cable 1100Volt grade for internal wiring including providing and fixing digital type Ampere meter, Voltmeter, Indication LED lamp, Selector switch,Labeling comprise white letters on black background including foundation works etc as required with following:-(Confoming to relevent BIS/IS standard or equivalent) 1) MCCB 400Amps 36KA-01No 2) MCCB 250Amps 36KA-02No 3) MCCB 200Amps 36KA-02No 4) MCB DP 32 Amps -03 Nos 5) MCB TPN 63 Amps -01 Nos 6) 4 strip AL Busbar 400Amp- 02 Set

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supply and Fixing DP Sheet Steel enclosure on surface/recess along with 25/32 A 240 V "C" curve DP MCB Complete with Connections, testing and commissioning etc. as required.

Supplying and fixing of 32 mm dia X 2 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.