Firozabad Shikohabad Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Firozabad Shikohabad Development Authority Tender
Eprocure
Opening Date27 Dec 2018
Closing Date23 Jan 2019
Tender Amount₹ 17,44,49,781
Costs
EMD
₹ 3,48,996Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_FSDUP_287148_2Bid Award Id
ViewTender No
469/D.A./2018 Dt. 21-12-2018Tender Authority
Firozabad Shikohabad Development Authority ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying cement concrete 8 4 1(8 stone ballast 40 mm, 4 coarse sand & 1 cement) including form work, labour T & P etc. required for proper completion of the work. ( S.I.No. 275 )
272.55
-
4090
RCC work with cement, approved coarse sand and 2 cm gauge approved stone grit in the proportion of 1 1.5 3 ( 1 cement, 1.5 coarse sand & 3 stone grit) in raft foundation and footing excluding reinforcement including its bending the same with 24 BWG binding wire and necessary centering and shuttering etc. and also including supply of all materials, labour T & P etc. required for proper completion of the work. (S.I.No. 284a-284+287) (a) For raft foundation or column footings
792.88
-
6650
Mild steel ( Tor steel or plain ) or iron in plain work such as reinforced concrete or reinfored brick work ( when not included in overall rate) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured upto floor two level. ( S.I. 504) In foundation
933.63
-
6350
Class - 150 brick work in 1 6 ( 1 cement & 6 coarse sand of 2.2 F.M. ) in foundation & plinth including supply of all materials, labour T & P etc. required for proper completion of the work. ( S.I.303)
232.24
-
4400
Providing and laying cement concrete in 8 4 1 ( 8 stone grit 40 mm gauge, 4 approved coarse sand & 1 cement ) including form work, all materials, labour T & P etc. required for proper completion of the work. (S.I.No.279)
413.99
-
5150
RCC work with cement, coarse sand and 2 cm gauge approved stone grit in the proportion 1 1.5 3 ( 1 cement- 1.5 coarse sand- 3 stone grit 2 cm gauge )in coloumn including necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and including supply of all materials, labour T & P etc. required for proper comletion of the work.(S.I.No.289)
712.83
-
8800
RCC work with cement, coarse sand and 2 cm gauge approved stone grit in the proportion 1 1.5 3 ( 1 cement- 1.5 coarse sand- 3 stone grit 2 cm gauge )in lighter beams span having upto 6 m including necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and including supply of all materials, labour T & P etc. required for proper comletion of the work.(S.I.No.285 + Difference)
665.83
-
8800
RCC work with cement, coarse sand and 2 cm gauge approved stone grit in the proportion 1 1.5 3 ( 1 cement- 1.5 coarse sand- 3 stone grit 2 cm gauge )in slabs including necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and including supply of all materials, labour T & P etc. required for proper comletion of the work.(S.I.No.284a )
1590.17
-
8200
RCC work with cement, coarse sand and 2 cm gauge approved stone grit in the proportion 1 1.5 3 ( 1 cement- 1.5 coarse sand- 3 stone grit 2 cm gauge ) in R.C.C. lintels of doors and windows including necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and including supply of all materials, labour T & P etc. required for proper comletion of the work. (S.I.No.283 & 284a)
71.32
-
7600
Mild steel ( Tor steel or plain ) or iron in plain work such as reinforced concrete or reinfored brick work ( when not included in overall rate) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured upto floor two level. ( S.I. 504) In foundation.
2983.15
-
6350
Class - 150 brick work in 1 6 (1 cement & 6 coarse sand) in super structure including supply of all materials labour T & P etc. required for proper completion of the work. ( S.I.No. 303+309)
2929.67
-
4650
Class - 150 brick work in 1 4 (1 cement & 4 coarse sand) in super structure for 115 mm thick wall including supply of all materials labour T & P etc. required for proper completion of the work. ( S.I.No. 303)
1852.58
-
4680
Mild steel or iron work for fabrication of M.S grill and staircase railling wrought to required including supply of all materials, nuts & bolts and wastage, labour T & P etc. required for proper completion of the work. ( S.I.No. 502 II)
813.96
-
6600
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.5 m in height dimension comprising of uPVC multi-chambered frame with in built roller track and sash extruded profiles duly reinforced with 1.60 +0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile) , appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket,wool pile, zinc alloy ( white powder coated ) touch locks with hook, zinc alloy body with single nylon rollers ( weight bearing capacity to be 40 kg), G.I. fasteners 100 X 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer in charge. (Single/doubleglass panes, wire mesh and silicon sealent shall be paid separately) NOTE- For uPVC frame and sash extruded profiles minus 5 % tolrence in dimension i.e in depth & width of profile shall be acceptable.
17.81
-
7200
Two track two panels sliding window made of small series) frame 52 X 44 mm & sash 32 X 60 mm both having wall thickness of 1.9 + - 0.2 mmand single glazing bead of appropriate dimension, ( Area of window upto 1.75 sqm) (DSR 9.147D.1 Taking 10 % profit)
1398.72
-
5365
Supply and fixing 5.5 mm thick float glass in windows & ventilators including supply of all materials labour T & P etc. required for proper completion of the work. (DSR 9.7.7.2 + 10 % C.P.)
1398.72
-
1393.5
Supply and filling silicon sealant in joints of window & ventilator of uPVC frames. (DSR 8646)
376
-
100
P/F 6 mm dia threaded expension hold fasteners on CC/RCC/Brick masonary surface backing including drilling necessary holes and the cost of bolts etc. complete. (DSR 8.8.1.1)
8272
-
24.2
Providing & fixing PVC chicken wire mesh including suply of all materials, labour T & P etc. required for proper completion of the work.
971.33
-
47.52
Providing and laying cement concrete in 4 2 1 of not less than strength of M-150 ( 4 stone grit of 20 mm gauge- 2 coarse sand- 1 cement ) and curing complete including cost of form work and supply of all materials, labour T & P etc. required for proper completion of the work. (S.I.No. 279 a)
15.04
-
6090
12 mm cement plaster 1 6 ( 1 cement - 6 fine sand ) in single coat on fair side of single or half brick wall for interior plastering including internal rounded angles chamfers and/ or rounded angles not exceeding 80 mm in grith and finished even and smooth. no extra for any additive. ( S.I.No. 584 + Diff.)
29398.5
-
155
15 mm cement plaster 1 6 ( 1 cement - 6 fine sand ) in single coat on rough side of single or half brick wall for interior plastering including internal rounded angles chamfers and/ or rounded angles not exceeding 80 mm in grith and finished even and smooth. no extra for any additive. ( S.I.No. 584 + Diff.)
29187
-
170
Smooth finishing of the exposed surface of RCC work with 6 mm cement mortar 1 3 cement and fine sand including supply of all materials, labour T & P etc. required for proper completion of the work. ( SOR-CPWD 13.16/2018 )
7747.17
-
115
Cinder filling under floor and any other sunkun portion of building including watering ramming and compaction etc. all complete as per diection of E/I.
282
-
210
Providing and fixing ist quality ceramic glazed floor tiles conferming to IS 15622 ( thickness to be specified by the manufacturer) of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer In charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 3 ( 1 cement & 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (DSR 11.37A/16 over Kitchen Top
156.67
-
641
Providing and fixing ist quality ceramic glazed floor tiles conferming to IS 15622 ( thickness to be specified by the manufacturer) of approved make, in all colours, shades except white, Ivory, Grey, Fume red, Brown laid on 20 cm thick bed of cement mortar 1 4 ( 1 cement - 4 coarse sand ) , including pointing the joints with white cement and matching pigments etc. complete. (DSR 11.38/16 ( 300X300 mm )
8483.5
-
715
Providing and fixing ist quality ceramic glazed wall tiles conferming to IS 15622 ( thickness to be specified by the manufacturer) of approved make, in all colours, shades except white, Ivory, Grey, Fume red, Brown laid on 12 cm thick bed of cement mortar 1 3 ( 1 cement - 3 coarse sand ) , including pointing the joints with white cement and matching pigments etc. complete. (DSR 11.38/16 ( 300X300 mm )
2099.33
-
712
Providing and fixing of glass strips in joints of floor and skirting at the time of laying floors flush with floor level including all complete etc. 22 mm wide 4 mm thick. ( SI 631a) 22 mm depth & 4 mm thick
164.5
-
15
35 mm thick & 4 mm thick
493.5
-
16
40 mm thick cement concrete flooring 1 2 4 ( 1 cement- 2 coarse sand - 4 stone grit 20 mm gauge ) laid in one layer, finished with floating coat of neat cement including fixing of glass strips. ( excluding cost of glass strips ) Item no. SOR 665
681.5
-
350
25 mm thick cement concrete flooring 1 2 4 ( 1 cement - 2 coarse sand - 4 stone grit 12.5 mm gauge ) laid of over base concrete finished with floating coat of neat cement including fixing of glass strips. ( excluding cost of glass strips ) item no. SOR 625
2459.67
-
250
Supply and fixing of hexagonal fan box with hexagonal side of approximate 80 mm in length fabrication from 16 SWG M.S sheet in corporate 10 mm and MS round bar dully bent for supporting fan hanger etc. all complete. S.I. 1149/ electrical SOR 2016
752
-
129.6
Providing and fixing 40 mm diameter and 30 cm long PVC pipe water spout pipe in cement mortar 1 4 ( 1 cement - 4 coarse sand ) etc. complete. ( Ch-21/5 + 23 (1)2)
1504
-
78
Providing and applying white cement based putty of avarage thickness 1 mm of approved brand and manufacturer, over the plastered wall surface even and smooth complete. (DSR 13.80/16)
23163.17
-
83.5
Finishing walls with Acrylic (Apex) smooth exterior paint of required shade 13.46.1 New work ( Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm (DSR 16/13.46.1)
23163.17
-
92
Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J & N, Shalimar, asian paint after throughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand prepared smooth including cost of all materials. (S.I.No. 649+650)
38842.37
-
67
Painting or varnishing on iron works in small areas or new wood work with one coat of ready mix priming paint and two coat of approved superioe quality ready mixed paint of clear synthetic varnish ( Berger, dulux, Narolac, Shalimar) including supply of all materials, labour T & P etc. required for proper completion of the work. Paint to be used should conferm to the ISI no. 103-1950. ( SOR 641(1a+2a)+642)
7332
-
98
Providing and laying of Brick Coba 12 mm thick laid with M-150 class brick bats coba 7.50 cm thick with gap of 15 mm to each other over 20 mm thick cement mortar average 1 4 ( 1 cement & 4 coarse sand ) cement mortar including supply of all materials, labour T & P etc. required for proper completion of the work including water proofing compound and recorn synthetic etc. all complete as directed by E/I. (SOR NEW-2018)
3376.17
-
900
Providing Gola 75 X 75 mm in cement concrete 1 2 4 ( 1 cement- 2 coarse sand - 4 stone grit 10 mm & down gauge ) including finishing with cement mortar 1 3 ( 1 cement - 3 fine sand ) as per standard design. In 75X75 mm deep chase (DSR 12.21.1 /2016)
940
-
146.35
Making Khurras 45 X 45 cm with average minimum thickness of 5 cm cement concrete 1 2 4 ( 1 cement- 2 coarse sand - 4 stone grit 20 mm nominal size ) over PVC sheet 1 m X 1 m X 400 micron, finished with 12 mm cement plaster in 1 3 ( 1 cement- 3 coarse sand ) and a coat of neat cement, rounding the edges making and finishing the outlet complete, (DSR 12.22/2016)
94
-
179.4
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc. by applying cement slurry mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg./sqm . This layer will be allowed to air cure for 4 hours (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonary with polymer mixed slurry. (DSR 22.5/2016)
3509.33
-
282.5
Supply and fixing of 32 mm thick commercial quality plywood flush door shutter conferming to IS 2202 part-1 ( 1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges bolts nuts handles springs and other fitting with necessary screws etc. all complete. (SOR 470A/2018)
2639.83
-
1600
Supply and fixing of oxidized iron fitting with screws for door and window etc. all complete. S.I.No. 473 /2018)
2639.83
-
420
Numbering of flats with letter/ No. writing including painting one coat of ready mixed priming paint and two coats of approved superior quality ready mixed paint including supply of all materials tools & plants etc. required for proper completion of the work. (AR)
376
-
20.5
Providing and fixing chlorinated Polyvinynyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, I/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. Concealed work, including citting chases and making good the walls etc.32 mm dia
3384
-
398.7
20 mm dia
752
-
276.5
15 mm dia
579.67
-
239.6
Providing & fixing CPVC pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, I/C fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I, concealed work inc cutting chases amd making good the walls etc. with 20 mm nominal outer dia pipes as per DSR 2016 item No. 18.8.2 as approved make ( Astral, Ashirwad, Kissan as per ISI)
3274.33
-
142.8
Providing and fixing water closet squatting pan (Indian Type WC pan) with 100 mm sand cast iron P or S trap, 10 litre low level white PVC flushing Cistern, including flush pipe, with manually controlled device ( handle lever) conferming to IS 7231 with all fittings and fixures complete, including cutting and making good the walls and floors wherever required. White Vitrous China Orissa Pattern WC pan ( Somani, Kajaria, Cera, Parryware, Hindware) of size 580 X 440 mm with Internal type foot rests. (DSR 17.1.1/2016 ) 580 mm X 440 MM
376
-
3342.2
Providing and fixing following dia PVC pipe heavy quality 4 kg/sqcm working pressure including supply of all specials clamps with wall cuttings etc. and other materials labour T & P etc. required for proper completion of the work. 110 mm dia (SOR-23/31)
665.83
-
350
90 mm dia (SOR-23/32)
940
-
250
P/F of following PVC fittings including all complete. (i) Door Tee 110 X 110 X 110 mm
376
-
288
(ii) Door Tee 90 X 90 X 90 mm
470
-
200
(iii) Door short Bend 110 mm
188
-
190
(iV) Plane short Bend 110 mm
94
-
134
(v) Plane short Bend 90 mm
94
-
118
P/F 100 mm dia PVC Nahani Trap heavy quality ISI marked including supply of all materials, labour T & P etc. required for proper completion of the work.
752
-
117
S/F of 10 cm dia of PVC down pipe complete with rose heads bends M.S. clamps 2.5 cm X 2.5 cm X 3 mm fixed to walls by 15 cm long 6 mm dia nail including repairing of plaster, pointing etc. including supply of all materials, labour T & P etc. required for proper completion of the work. ( PWD S,I,No. 730-3)(i) Ground floor & First Floor
1128
-
250
(ii) Second Floor
846
-
250
(iii) Third floor
775.5
-
250
Providing & fixing 90 mm PVC pipe heavy quality 4 kg/Sqcm of down pipe complete with rose heads, bends, M.S. clamps 2.5 cm X 2.5 cm X 3 mm fixed to walls by 15 cm long 6 mm dia nail including supply of all materials, labour T & P etc. required for proper completion of the work. (PWD SOR No. 730/2016) (i) Ground floor & First Floor
1880
-
235
(ii) Second Floor
752
-
235
(iii) Third floor
752
-
235
Supply & fixing of 90 mm dia PVC Y junction heavy quality ISI marked including supply of all materials, labour T & P etc. required for proper completion of the work.
282
-
280
Supply & fixing of 110 mm dia PVC Terminal guard heavy quality ISI marked including supply of all materials, labour T & P etc. required for proper completion of the work.
94
-
260
Supply & fixing of 90 mm dia PVC Terminal guard heavy quality ISI marked including supply of all materials, labour T & P etc. required for proper completion of the work.
94
-
235
Providing and fixing C.P.brass long body bib cock ( Kingston, Glacier, Corbat, Allent, Hindware) of approved quality conferming to IS standards and weighing not less than 400 grms 15 mm nominal bore
1128
-
355.5
Providing and fixing C.P.brass angle valve ( Kingston, Glacier, Corbat, Allent, Hindware) for basin mixur and geyser points of approved quality conferming to IS 8931 (a) 15 mm nominal bore (DSR 18.53.1)
376
-
455
Supply and fixing C.P. brass grating for Nahani trap of approved make including supply of all materials, labour T & P etc. required for proper completion of the work.
1128
-
30
Supply and hosting of 500 litre capacity ( Syntax or equivelent as per ISI) ISI marked low density polyethylene seamless one piece water storage Tank and placing the same in proper position including all taxes labour T & P etc. required for proper completion of the work. (PWD S.I.No. 730/2)
376
-
5000
Construction of brick masonary inspection chambers 0.45 m x 0.45m x 0.60m as per standard design with base concrete 1:6:12, 23 cm thick brick wall in 1:6 cement and coarse sand, plastering 1:4 cement and coarse sand with neat finish including RCC cover 8 cm thick including supply of all materials, labour T&P ctc. required for proper completion of the work.
94
-
3035.5
Construction of brick masonary inspection chamber of size 60 cm x 60 cm x 90 cm as per standard design with base concrete 1:6:12, 23 cm thick brick wall in 1:6 cement and coarse sand, plastering 1:4 cement and coarse sand with neat finish including ferro cement cover fixed with RCC 1:2:4 including supply of all materials, labour T&P ctc. required for proper completion of the work.
94
-
5505.6
Addition / subtraction of Masonry shaft 0.60 x 0.60 mtr. size as per slandered design &specification having one brick work in 1:4 cement & coarse sand 12 mm thick plaster in 1:4 cement & coarse sand mortar with neat finished & including 18 mm square MS bar foot rest embedded with 1:2:4 cement concrete at 23cm. centre to centre all complete. as per of Engineer in charge of work.
23.5
-
4152.9
Supply and laying of 150mm dia RCC hume pipe over 10cm base of cement concrete 1:6:12 including excavation of earth and refilling including all material labour T&P all complete.
188
-
325
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore DSR 18.17.1
376
-
409.5
Wiring point for light with 1.50 Sqmtr F.R PVC insulated multi strand copper conductor cable in PVC conduit pipe partly concealed in the wall complete with 8 SWG GI earth continuity wire,piano type switch &ceiling rose/angle/batten holder on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash (E/M SI N0-131(c)) 2016
3384
-
518
Wiring point for fan/fresh air fan/light duly exhaust fan with 1.50 Sqmm FR PVC insulated multi strand single core copper conductor cable in PVC conduct pipe .partly concealed in the wall complete with 8 SWG GI earth continuity wire,piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash (E/M SI N0-133(c))
1128
-
595
Wiring point for call bell with 1.5 Sq mm FR PVC insulated multstrand copper conducter cable as earthwire drawn inside the conduit in PVC conduit concealed in wall with 14 SWG copper with earth connectvity wire and piano type bell push or 2 socket etc, complete all respect including maching colour wash. SOR 135(C)
376
-
475
Wiring point for Plug with 1.50 Sqmm FR PVC insulated multi strand copper conductor cable in PVC conduct pipe concealed in the wall complete with 8 SWG GI earth continuity wire,piano type switch & socket on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash. (E/M SI N0-134(c))
2256
-
275
Supply and fixing power plug with 15A/250 volt flush type swich and 5Pin 15A/250 volt flush type universal scoket in suitable MS Box of 175mm x100mmx50mm size with phenolic laminated backlight sheet cover 3mm thick fixed with brass machine screw and cup washer. SOR 1139
1880
-
270
S/Wiring of submain with two number 2.5 sqmm FR but in 20 mm dia heavy duty same as SI 261 (B) PVC insulated multistand copper conductor cable partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 8 SWG GI earth continuity wire including matching colour wash ect complete in all respect. (E/M SI N0-261 C)
8460
-
217
S/Wiring of submain with two number 4 sqmm FR PVC insulated 1100 volts grade multistand single core copper conductor cablein 20 mm dia heavy dutyPVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 8 SWG GI earth continuity wire including matching colour wash ect complete in all respect. (E/M SI N0-262C)
8460
-
125
S&F of 6 Amp to 32 Amp M.C.B.(10K) SOR No 1002
4512
-
200
S/F surface/flush mounting 8 ways SPN distibution board without MCB complete in all respect,as directed at site Engineer in charge SOR No 1024
376
-
750
S&F of 40 Amp S.P. Isolater SOR No 1004 (A)
376
-
140
S/L OF PVC CONDUIT COMPLETE WITH BEND 25MM DIA (S.I.No.282A)/2016
16920
-
40.2
Supply and fixing of swich box made up 16SWG (1.5mm) thick M.S. Sheet of 175x100x65 mm size dully painted with red oxide primer & flused in wall including cutting of brick work fixing it to the level with cement sand mortar including maching colour wash with S/o all material labour & T&P required for proper completion of work as directed at site by the Engineer in Charge. (SOR No 161)
1504
-
90
Supply and fixing of swich box made up 16SWG (1.5mm) thick M.S. Sheet of 100x100x65 mm size dully painted with red oxide primer & flused in wall including cutting of brick work fixing it to the level with cement sand mortar including maching colour wash with S/o all material labour & T&P required for proper completion of work as directed at site by the Engineer in Charge. (SOR No 159)
1128
-
60
3mm thick phenolic laminated sheet D.S.R.E&M No 1322 2016
483912
-
0.1
Supply and burying of 40 mm x 4.5 meters long G.I pipe vertically for earthing having 12 mm dia. Holes spaced 75mm apart drilled up to 2 meter from the bottom complete with ear thing lead of no-6 to 8 SWG GI wire in G.I pipe up to apron(and from apron to switch board 30 cm square CI box with hinged cover masonry enclosure funnel at top, alternate layers of charcoal/ coke and salt at least 150 mm thick around etc ap per E/I complete in all respect. (E/M SI N0-701)
16
-
3513.6
Supply and laying of 25 mm x 3mm G.I strip for earth electrode directly in the ground as required complete in all respects(E/M S.I 716)
596.9
-
82
Bus Bar L.T. Panel Board etc. including all fitttings with installation of board complete in all respect.
7.99
-
100000
Supply and laying cable of 95 sqmm X 3.5 core complete in all respect
2263.99
-
195
Supply and laying of 150mm dia RCC hume pipe over 10cm base of cement concrete 1:6:12 including excavation of earth and refilling including all material labour T&P all complete.
63.92
-
325
Excavation in foundation in ordinary soil (Loam, Clay or Sand) including lift upto 1.5 m lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus excavated earth as directed by Engineer- in- charge with lead of 50 m . (PWD SI No-251)
39.66
-
125
Providing and laying in cement concrete in 8:4:1 ( stone ballast 8 (40 mm nominal size) : 4 approved coarse sand : 1 cement and curing complete, including cost of formwork in foundation . (PWD S.I No- 274)
5.29
-
4090
Providing and laying RCC Reinforced cement concrete in 4 2 1 ( 4 stone grit 20 mm nominal size 2 coarse sand 1 cement ) of not less than strength of M-15 stone ballast approved coarse sand and cement curing complete & excluding supply of reinforcement but including its fixing and binding the samewith 24 BWGI binding wire and including necessary centering and shuttering etc. and also including supply of all materiallabour T & P etc. required for proper completion of the work. for raft foundation (S.I. 287)
7.93
-
6200
Providing and laying RCC Reinforced cement concrete in 4 2 1 ( 4 stone grit 20 mm nominal size 2 coarse sand 1 cement ) of not less than strength of M-15 stone ballast approved coarse sand and cement curing complete & excluding supply of reinforcement but including its fixing and binding the samewith 24 BWGI binding wire and including necessary centering and shuttering etc. and also including supply of all materiallabour T & P etc. required for proper completion of the work. for column (S.I. 288)
10.22
-
8400
Providing and laying RCC Reinforced cement concrete in 4 2 1 ( 4 stone grit 20 mm nominal size 2 coarse sand 1 cement ) of not less than strength of M-15 stone ballast approved coarse sand and cement curing complete & excluding supply of reinforcement but including its fixing and binding the samewith 24 BWGI binding wire and including necessary centering and shuttering etc. and also including supply of all materiallabour T & P etc. required for proper completion of the work. for lighter beam (S.I. 285)
62.51
-
8400
Class - 150 brick work in 1 6 (1 cement & 6 coarse sand) in super structure including supply of all materials labour T & P etc. required for proper completion of the work. ( S.I.No. 303)
162.15
-
4650
12 mm cement plaster in single coat of fair side of single or half brick wall for interior plastering upto floor to level including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth.(S.I.17.58)
634.5
-
140
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor to level including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth.(S.I.17.59)
634.5
-
155
Mild steel or iron work for fabrication of M.S grill and staircase railling wrought to required including supply of all materials, nuts & bolts and wastage, labour T & P etc. required for proper completion of the work. ( S.I.No. 502 II)
63.32
-
6600
Finishing walls with water proofing cement paint of approved make such as super snowcem, durocem etc. quality and of required shade on under coated wall surface (Two coat) over and including one coat white cement primer to give even shade after thoroughly brushing the surface.
1057.5
-
80
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonnes capacity after excavating earth to an avarage of 22.5 cm depth, dressing & camberand consolidating with road roller including making good the undulations etc. and rerolling the sub grade and disposal of surplous earth within upto 50 meters. (DSR-16.1)
4892.7
-
90.1
Earth work in cutting or in embankment in ordinary soil excavation to be done in form of regular pits not exceeding 1/2 m in depth and work embankment to be in 20 cm layers including ramming and dressing the surface to required level and slopes and also including 1.5 m lift and 30 m lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with 50 m distance as directed by E/I including Royality @ Rs. 14.00 per Cum. ( S.I. No. 253A)
1518.57
-
104
Cartage of earth as in item No. 2 above upto 5 Km distance including loading & unloading, royality and cost of the earth complete in all respect. (S.I.No. 231a)
1518.57
-
173
As per item No. 2 above but mechanically compacted to 95 % Proctor density. ( S.I.No. 253b)
1518.57
-
22
Construction of granular sub-base (GSB) by providing coarse graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer in-Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) MORT&H clause no. 401
1045.66
-
3343
Providing and laying I shaped precast rubber moulded 80 mm thick factory made cement concrete interlocking paver block of M-30 grade& 4.50 Kg made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of local sand, filling the joints with line sand etc. all complete as per the direction of Engineer in charge. (MR )
4197.57
-
1010
Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1 3 6 ( 1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size) 0ver 75 mm bed dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer in charge. (DSR 16.63)
1771.9
-
382.05
Excavation in foundation in ordinary soil (Loam, Clay or Sand) including lift upto 1.5 m lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus excavated earth as directed by Engineer- in- charge with lead of 50 m . (PWD SI No-251)
64.3
-
125
Providing and laying in cement concrete in 10:5:1 ( stone ballast 8 (40 mm nominal size) : 4 approved coarse sand : 1 cement and curing complete, including cost of formwork in foundation . (PWD S.I No- 274)
21.43
-
3850
Class-150 brick work in 1:6(1 cement : 6 coarse sand ) in Foundation & Plinth including supply of all material, labour, T&P etc. required for proper completion of work . (PWD S.I No. 303)
49.29
-
4400
Excavation in foundation in ordinary soil (Loam, Clay or Sand) including lift upto 1.5 m lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus excavated earth as directed by Engineer- in- charge with lead of 50 m . (PWD SI No-251)
22.84
-
125
Providing and laying in cement concrete in 8:4:1 ( stone ballast 8 (40 mm nominal size) : 4 approved coarse sand : 1 cement and curing complete, including cost of formwork in foundation . (PWD S.I No- 274)
5.08
-
3850
Class-150 brick work in 1:6(1 cement : 6 coarse sand ) in Foundation & Plinth including supply of all material, labour, T&P etc. required for proper completion of work . (PWD S.I No. 303)
21.95
-
4400
Providing and laying cement concrete in 4 2 1 ( 4 stone grit 20 mm nominal size 2 coarse sand 1 cement ) of not less than strength of M-15 stone ballast approved coarse sand and cement curing complete including supply of all materiallabour T & P etc. required for proper completion of the work. (S.I. 279(a)
2.92
-
6090
Class - 150 brick work in 1 6 (1 cement & 6 coarse sand) in super structure including supply of all materials labour T & P etc. required for proper completion of the work. ( S.I.No. 303)
29.19
-
4650
12 mm cement plaster in single coat of fair side of single or half brick wall for interior plastering upto floor to level including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth.(S.I.17.58)
177.66
-
140
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor to level including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth.(S.I.17.59)
177.66
-
155
Finishing walls with water proofing cement paint of approved make such as super snowcem, durocem etc. quality and of required shade on under coated wall surface (Two coat) over and including one coat white cement primer to give even shade after thoroughly brushing the surface.
355.32
-
80
Mild steel or iron work for fabrication of M.S grill and staircase railling wrought to required including supply of all materials, nuts & bolts and wastage, labour T & P etc. required for proper completion of the work. ( S.I.No. 502 II)
0.94
-
6600
Painting or varnishing on iron works in small areas or new wood work with one coat of ready mix priming paint and two coat of approved superioe quality ready mixed paint of clear synthetic varnish ( Berger, dulux, Narolac, Shalimar) including supply of all materials, labour T & P etc. required for proper completion of the work. Paint to be used should conferm to the ISI no. 103-1950. ( SOR 641+642)
4.23
-
98
Excavating trenches of required width for pipes, cables, etc. including excavation for sockets and dressing of sides ramming of bottoms, depth up to 1.5 m including getting out the excavated earth and then returening the earth as required in layers not exceeding 20 cm in layer, including consolidating each deposited layer by ramming, watering etc. and disposing surplous earth as directed within a lead of 80 m. Pipes and cable etc. ( Chap. 25 Item 12 SOR 2016
726.15
-
160
Providing and laying non pressure NP-2 class ( medium duty) R.C.C. hume pipe including collers/ spigot jointed with stiff mixure of cement mortar in the proportion of 1 2 ( 1 cement & 2 coarse sand) including testing of joints etc. including cartage of pipes on actual site of work complete . 450 mm dia
178.6
-
525
300 mm dia
547.55
-
425
Providing and laying in cement concrete in 1:5:10 (1 cemen :5 approved coarse sand : 10 stone ballast (40 mm nominal size) and curing complete, including cost of formwork in foundation . (PWD S.I No- 274)
45.78
-
3750
Providing and laying cement concrete in 4 2 1 ( 4 stone grit 20 mm nominal size 2 coarse sand 1 cement ) of not less than strength of M-15 stone ballast approved coarse sand and cement curing complete including supply of all materiallabour T & P etc. required for proper completion of the work. (S.I. 279(a)
152.89
-
6090
Constructing 150 class brick masonary circular type manhole 0.91 m internal dia at bottom and 0.56 m dia at top in cement mortar 1 4 ( 1 cement 4 coarse sand ) in side and outside cement plaster 12 mm thick with cement mortar 1 3 ( 1 cement 3 coarse sand ) finished with a floating coat of neat cement, foundation concrete 1 3 6 mix ( 1 cement 3 coarse sand 6 graded stone aggregate 40 mm nominal size ) finished with a floating coat of neat cement all complete as per standard design including foot rest and SFRC cover and frame heavy duty HD 20 grade designation ) 560 mm internal diameter conforming to IS 12592 total weight of cover and frame should not be less than 182 kg. fixed in cement concrete 1 2 4 ( 1 cement 2 coarse sand 4 stone aggregate of 20 mm nominal size ) including centerin and shuttering and 12 mm thick plaster at the external surface .
6.11
-
8772
Same as above item (5) but for extra addition or subtraction as required at site depth for circular type manhole 0.91 m internal dia at bottom beyond 0.91 m to 1.67 m
2.35
-
4308
Constructing masonary chamber brick work with common burnt clay F.P.S ( non modular) bricks of class designation 150 in cement mortar 1 4 ( 1 cement and 4 coarse sand ) with RCC top slab with 1 2 4 ( 1 cemnt 2 coarse sand 4 graded stone aggrigate of 20 mm nominal size ), foundation concrete 1 4 8 ( 1 cement 4 coarse sand 8 graded stone aggegate of 40 mm nominal size ), inside plastreing 12 mm thick with cement mortar 1 3 ( 1 cement 3 coarse sand ) finished with floating coat of neat cement and making channels in cement concrete 1 2 4 ( 1 cement 2 coarse sand 4 graded stone aggregate of 20 mm nominal size ) finished with neat cement complete as per standard degign 60 X 60 X 75 cm inside with SFRP Cover and frame heavy duty HD 20 grade.
9.4
-
6000
Constructing masonary chamber brick work with common burnt clay F.P.S ( non modular) bricks of class designation 150 in cement mortar 1 4 ( 1 cement and 4 coarse sand ) with RCC top slab with 1 2 4 ( 1 cemnt 2 coarse sand 4 graded stone aggrigate of 20 mm nominal size ), foundation concrete 1 4 8 ( 1 cement 4 coarse sand 8 graded stone aggegate of 40 mm nominal size ), inside plastreing 12 mm thick with cement mortar 1 3 ( 1 cement 3 coarse sand ) finished with floating coat of neat cement and making channels in cement concrete 1 2 4 ( 1 cement 2 coarse sand 4 graded stone aggregate of 20 mm nominal size ) finished with neat cement complete as per standard degign 90 X 80 X 75 cm inside with SFRP Cover and frame heavy duty HD 20 grade.
9.4
-
7200
Addition / subtraction of masonary shaft as per standard design & specification having one brick work in 1 4 ( 1 cement 4 coarse sand ) and 12 mm thick plaster in 1 3 ( 1 cement 3 coarse sand ) with neat cement finish including 18 mm square MS bar foot rest embaded with 1 2 4 ( 1 cement 2 coarse sand 4 graded stone aggregate of 20 mm nominal size ) at 23 cm centre to centre cmp,lete in all respect. 60 X 60 cm
5.64
-
4100
90 X 80 cm
9.87
-
4100
Constructing soak pit and sewer septic tank at different places for different capacities including supply of all materials labour T & P etc. required for proper completion of the work. Payment should be made as per actual item wise work done, the rates for these items should be take as per boq of this work.
2.35
-
1200000
Excavating trenches of required width for pipes, cables, etc. including excavation for sockets and dressing of sides ramming of bottoms, depth up to 1.5 m including getting out the excavated earth and then returening the earth as required in layers not exceeding 20 cm in layer, including consolidating each deposited layer by ramming, watering etc. and disposing surplous earth as directed within a lead of 80 m. Pipes and cable etc. exceeding 80 mm dia but not exceeding 300 mm dia ( Chap. 25 Item 12 SOR 2016
547.55
-
160
Supply, carting, laying and jointing of 110 mm PVC pipe of 6 kg/sqcm including specials, couplings, fittings to site of work lowering the same into trenches and laying true to alignment and gradient including testing of pipe lines and including the cutting of pipes for making up complete in all respect. Chap-23 (SOR 15-16) 110 mm dia
235
-
350
160 mm dia
312.55
-
482
Providing and fixing 110 mm dia C.I. sluice valve with cap complete with bolts, nuts, ruber insersion etc. complete in all respect. Tail pieces if required paid separately.110 mm dia
1.88
-
3500
160 mm dia
2.82
-
4900
Providing and fixing 110 mm dia C.I. fire hydrant with cap complete with bolts, nuts, ruber insersion etc. complete in all respect. Tail pieces if required paid separately.
2.35
-
4500
Constructing 150 class brick masonary chamber brick work with brunt clay FPS bricks of class designation 150 in cement mortar 1 4 ( 1 cement 4 coarse sand ) for sluice valve with surface box 100 mm top dia, 160 mm bottom dia and 180 mm deep (inside) with chained lid and RCC top slab 1 2 4 mix ( 1 cement 2 coarse sand 4 stone aggregate of 20 mm nominal size ) including centering and shuttering and including excavation, foundation concrete 1 5 10 (1 cement 5 coarse sand 10 stone aggregate of 40 mm nominal size ) and inside plaster with cement mortar 1 3 ( 1 cement 3 coarse sand ) 12 mm thick finished with floating coat of neat cement complete as per standard desigh 60cm X 60cm X 75 cm inside.
4.7
-
6000
Providing and fixing 110 mm dia C.I. air valve with cap complete with bolts, nuts, ruber insersion etc. complete in all respect. Tail pieces if required paid separately.
0.94
-
3500
Supply and laying of 15 mm G.I. class-B pipe in trench including G.I. fittings ISI marked for external work including excavation upto required depth and filling watering and ramming of the same in trench after laying pipe in position complete.
5640
-
125
Excavation in foundation in ordinary soil (Loam, Clay or Sand) including lift upto 1.5 m lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus excavated earth as directed by Engineer- in- charge with lead of 50 m . (PWD SI No-251)
29.19
-
125
Providing and laying in cement concrete in 10:5:1 ( stone ballast 8 (40 mm nominal size) : 4 approved coarse sand : 1 cement and curing complete, including cost of formwork in foundation . (PWD S.I No- 274)
6.49
-
3850
Class-150 brick work in 1:6(1 cement : 6 coarse sand ) in Foundation & Plinth including supply of all material, labour, T&P etc. required for proper completion of work . (PWD S.I No. 303)
28.05
-
4400
Providing and laying cement concrete in 4 2 1 ( 4 stone grit 20 mm nominal size 2 coarse sand 1 cement ) of not less than strength of M-15 stone ballast approved coarse sand and cement curing complete including supply of all materiallabour T & P etc. required for proper completion of the work. (S.I. 279(a)
3.73
-
6090
Providing precast cement 50 mm concrete Jali 1 2 4 ( 1 cement 2 coarse sand 4 graded stone aggregate 6 mm nominal size) reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning fixing and finishing in cement mortar 1 3 ( 1 cement 3 fine sand ) etc. complete excluding plastering of the the jambs, sills and soffits. (DAR
64.86
-
814.55
12 mm cement plaster in single coat of fair side of single or half brick wall for interior plastering upto floor to level including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth.(S.I.17.58)
64.86
-
140
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor to level including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth.(S.I.17.59)
64.86
-
155
Finishing walls with water proofing cement paint of approved make such as super snowcem, durocem etc. quality and of required shade on under coated wall surface (Two coat) over and including one coat white cement primer to give even shade after thoroughly brushing the surface.
129.72
-
80
Excavation in foundation in ordinary soil (Loam, Clay or Sand) including lift upto 1.5 m lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus excavated earth as directed by Engineer- in- charge with lead of 50 m . (PWD SI No-251)
178.6
-
125
Providing and laying in cement concrete in 8:4:1 ( stone ballast 8 (40 mm nominal size) : 4 approved coarse sand : 1 cement and curing complete, including cost of formwork in foundation . (PWD S.I No- 275)
17.86
-
3850
RCC work with cement, coarse sand and 2 cm gauge approved stone grit in the proportion 1 1.5 3 ( 1 cement- 1.5 coarse sand- 3 stone grit 2 cm gauge )in footing and foundation including necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and including supply of all materials, labour T & P etc. required for proper comletion of the work.(S.I. 288+ difference)
116.18
-
8800
Mild steel ( Tor steel or plain ) or iron in plain work such as reinforced concrete or reinfored brick work ( when not included in overall rate) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured upto floor two level. ( S.I. 504) In foundation.
94
-
6350
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements