Eastern Dedicated Freight Corridor Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Eastern Dedicated Freight Corridor - EDFC Tender
Civil And Construction
Excavation
Ireps
Opening Date19 Jun 2024
Closing Date10 Jul 2024
Tender Amount₹ 10,79,67,473.64
Costs
EMD
₹ 21,59,400Document Cost
₹ 11,800Tender Fee
Refer Documents
Summary
Repairing, Refixing/replacement, Maintenance Of Signaling And Telecommunication Gears/ Equipment & Other Related Works With Hiring Of Manpower, Hiring Of Multi Utility Vehicles And Supply Of Spares & Tools, Safety Items For New Karchana- New Deen Dayal Upadhyay (chainage Km 119.550 To 278.155)- Including Ir Link Lines (kcnn-idgj, Kcnn-pcoi, Undn-munpl, Dapn-car & Arwn-jep) Section Of Eastern Dedicated Freight Corridor (edfc) Under Cgm/prayagraj (east) Unit For Two (02) Years.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
PRYJESSTMCKCNNDDUN2024-EDFC FIELD UNIT-ALLAHABAD-E-S AND T/EDFCTender No
PRYJESSTMCKCNNDDUN2024Tender Authority
Eastern Dedicated Freight Corridor ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Blowing/drawing of OFC cable in the HDPE pipe duct already provided in the trench and protective work. The cable shall be laid only after the successful completion of the DIT (Duct Integrity test). The DIT should be certified by the DFCCIL engineer at site. All the equipments/machinery required shall be arranged by the contractor.
37
19486
720984.96
Supplying and placing of one layer of quality bricks of standard size and of 'B' grade of the local make and spreading on cables laid. (minimum size of brick 200mm X 100mm X 70mm)
39345
4
193577.4
Cross trench for identification of the route of existing signalling and telecom cables.
270
331
89391.6
Cutting of all types of platforms/road crossing and trenching and excavation to a width and depth of 300 mm x 300 mm, laying of DWC/HDPE/GI pipe in the trench and refilling and concreting it afterwards as per 7 original condition. In hard rocky ground area, cables will be laid normally on layer of soft earth of 0.05 mtrs thickness previously deposited at bottom of the trench. The cutting to be filled and finished with cement/concrete, as per the RDSO drawing no. SDO/Cable laying/008, issued vide RDSO document no. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014 or latest.
42
181
7607.04
Horizontal direction drilling (HDD)/Trenchless digging/machine drilling without damage to surface road /track for laying/insertion of HDPE/GI/DWC pipe. The bore shall be done at the depth of minimum 1400 mm 8 from the ground level. The ground level shall be considered ignoring the bank height of the bank of the road.Note:- DWC/HDPE/GI Pipe Supply is not covered under this item. Contactor shall provide all material required for work and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. Payment of boring shall be madeonly after DWC/HDPE/GI pipe is laid in the bore.
18617
702
13081048.88
Laying and fixing of Medium class GI pipes 100 mm dia (4.5 mm thickness) as per IS 1239 ( Part 1) 2004 or latest with coupling on culverts/bridges, perforated at a distance of 20 cm or less with 10 mm dia hole, or 9 at any other locations as decided by Site Engineer.The GI pipe is to be filled with chattered compound. It includes supply of all material required for fixing arrangement. Contractor will also supply flexible/corrugated HDPE pipe at the end of GI pipe to protect the cables from sharp edges and sudden bends. The laying and fixing to be done as per RDSO drawings no. SDO/cable laying/011 and SDO/cable laying/012, issued vide RDSO document no. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014, or latest
105
403
42409.5
Horizontal Boring/Manual moling without damage to surface road /track for laying/isertion of DWC/GI/HDPE pipe. The bore shall be done at the depth of minimum 1400 mm from the ground level. The ground 10 level shall be considered ignoring the bank height of the bank of the road. Note:- DWC/HDPE/GI Pipe Supply is not covered under this item. Contactor shall provide all material required for work and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. Payment of boring shall be made only after DWC/HDPE/GI pipe is laid in the bore.
500
1234
617475
Cement concrete work for miscellaneous unscheduled items in ratio 1:3:6. Item includes excavation, ramming of CC by using vibrator, curing and plastering with cement and sand mixture (aggregate will not exceed beyond 3.8 cm). The aggregate cement and sand will be supplied by contractor.
11
5824
64074.67
Providing brick masonry in ratio 1:6 cement and mortar including plastering with 1:4 cement and 12 sand mixture both sides of bricks with thickness 20 mm each end with contractor's own 'B' Class bricks. I t also includes excavation,grouting, bolting etc. wherever required. 'B' Class bricks, sand and cement (ISI mark) will be supplied by the Contractor.
24
2003
48080.64
Splicing of 24 core optic fibre cable and making the splicing joint with contractor's own machine and 13 tools. Joint should be prepared in such a way that the top of the enclosure shopuld be at a depth of minimum 1.2 mtr and the enclosure should be covered with soft soil and bricks. Splice loss of each fibre should be within acceptable limits, preferably 0.05 dB.
30
13693
410802
Supply of thermo shrink jointing kit as per RDSO Specn.No. IRS: TC 77-2012 (Rev.3.0) with (Amdt.- 1 to 3) or latest, suitable for 6 Quad/jelly filled cables for straight through/derivation joints. It includes supply of all the accessories, without transformer
120
3832
459910.8
Installation of thermo shrink jointing kit as per RDSO Specn.No. IRS: TC 77-2012 (Rev.3.0) with 15 (Amdt.-1 to 3) or latest, suitable for 6 Quad/jelly filled cables for straight through/derivation joints. It includes supply of all the accessories, without transformer.
120
1918
230216.4
Repairing of Single (Full) case foundation by excavation and casting it with contractor's cement, 16 brick and other materials as per Drawing No. 1/SG/0006 Rev B , and as per scope of work. Contractor has to completely break the entire foundation retaining the existing MS frame. The entire work shall be executed by the contractor to the Satisfaction of Site Engineer.
24
2599
62394.72
Repairing of half case foundation by excavation and casting it with contractor's cement, brick and 17 other materials as per Drawing No. 1/SG/0005 Rev. B , and as per scope of work. Contractor has to completely break the entire foundation retaining the existing MS frame. The entire work shall be executed by the contractor to the Satisfaction of Site Engineer.
9
2599
23398.02
Strengthening of foundation of signals, Full/Half location boxes, by carrying out earth work around 18 the foundation, ramming of refilled earth, carrying out masonry work from bottom of earth work using country stones & cement masonry to prevent the earth from slipping down the bank. This also includes supply of required masonry materials.
51
1568
79999.62
Excavation, casting, curing of foundation and Installation and Erection of Apparatus case Full (App. 19 Case as per RDSO drg. no. RDSO/S-11500 or latest) with contractor's own frame, cement and other material in the ratio 1:3:6. 'E' type lock to be supplied and installed with App. case. This includes filling of location foundations with river bed sand and plastering on top with a mixture of 1:4 of cement and sand, ramming of refilled earth. It covers fixing of lamp holder, switch and lamp etc. in Apparatus Case.
48
13996
671841.6
Excavation, casting, curing of foundation and Installation and Erection of Apparatus case Half (App. 20 Case as per RDSO drg. no. RDSO/S-11507 or latest) with contractor's own frame, cement and other material in the ratio 1:3:6.'E' type lock to be supplied and installed with App. case.This includes filling of location foundations with river bed sand and plastering on top with a mixture of 1:4 of cement and sand, ramming of refilled earth. It covers fixing of lamp holder , switch and lamp etc. in Apparatus Case.
18
11778
212017.14
Fabrication and fixing of phenolic laminated sheet/Hylem sheet of grade P3, minimum 10 mm thick,as per Apparatus case diagram/plan, in location box by providing all fixtures like ARA/Disconnect terminals, 21 fuse blocks, fuses, relays on square bars etc. including fixing of PVC coated string rods at the back side for cable support with contractor's own material like iron angle, nuts, bolts etc. The iron angle for fixing shall be minimum 3 mm thick. This also includes fixing of teak wood shelf minimum 25 mm thick for holding track circuit equipments. The work shall be done as per instructions of Rly engineer at site. (Apparatus case Full)
65
5105
331855.55
Fabrication and fixing of phenolic laminated sheet/Hylem sheet of grade P3, minimum 10 mm thick,as per Apparatus case diagram/plan, in location box by providing all fixtures like Wago/Disconnect terminals, 22 fuse blocks, fuses, relays on square bars etc. including fixing of PVC coated string rods at the back side for cable support with contractor's own material like iron angle, nuts, bolts etc. The iron angle for fixing shall be minimum 3 mm thick. This also includes fixing of teak wood shelf minimum 25 mm thick for holding track circuit equipments. The work shall be done as per instructions of Rly engineer at site. (Apparatus case Half) Per
65
2769
180010.35
Fixing of Wago Terminals /Screw less connectors / modular disconnect terminal blocks and fuse 24 blocks on phenolic laminated sheets and fixing by stainless steel/brass nuts & bolts. This includes provision of two additional holes on the board on either side for cable conductor entry. The work shall be carried out as per instructions of Engineer/ Incharge of work.
6530
20
134844.5
Supply of Round head type, glass fuse as per Spec No IRS: S -78/92 with latest amendments, 0.2A/0.6A/2A/4A/6A/8A/10A/16A rating capacity.
1600
12
19840
Casting, concreting and curing of foundation for Main Signal Post in the ratio of 1:3:6 as per DFCCIL drwaing no. 1/SG/0003 Rev. B or as per instructions of Engineer/Incharge of the work, using standard size of foundation/galvanized anchor bolts complete, required for erection of colour light signal post. Anchor bolts complete should comply with the RDSO drg. no. SA 116 A/M. Item includes excavation, ramming of CC using vibrator, curing and plastering with 1:4 cement-sand mixture (aggregate will not exceed 3.8 cm). Aggregate, cement, sand and holding down bolts will be supplied by contractor. Any machines & tools, if required for execution of this item, will be arranged/provided by contractor.
14
15404
215658.38
Replacement of old signal unit of shunt signal. This would include releasing of old unit from top of signal post, erection and mounting of new signal unit over the post including wiring of Shunt Signal LED of shunt signal as per Technical Specification.
8
319
2552.16
Replacement of old signal unit /signal route of main signal. This would include releasing of old unit from top of signal post, erection and mounting of new signal unit over the post including wiring of Main Signal LED/Signal route of main signal as per Technical Specification.
14
1101
15420.16
Dismantling and Releasing of existing Signals (both electrical and Mechanical) and other associated S&T fittings like wheel, pulleys, wires, stakes etc.
18
1743
31389.48
Casting, concreting and curing of foundation for Position Light Shunt Signal as per as per DFCCIL drwaing no. 1/SG/0004 Rev. B or as per instructions of Engineer/Incharge of the work using standard size of 30 foundation/galvanized anchor bolts complete, required for erection of shunt signal post. Anchor bolts complete should comply with RDSO drg. no. SA 110 A/M.. Item includes excavation, ramming of CC using vibrator, curing and plastering with 1:4 cement sand mixture. Aggregate cement, sand and holding down bolts, will be supplied by contractor. Any machines and tools, if required for execution of this item, will be arranged/provided by contractor.
8
4184
33473.44
Erection of CLS Post with base and signal unit on top or on Offset Bracket including erection of auxiliary signals like calling on, shunt signal if any. It includes fixing of all LEDs and wiring of complete signal 31 including route and auxilliary signals, if any. It includes fixing of front and back staging, ladder and guards, signal name plates / boards, with contractor's own brackets and fixing materials. The work shall be done as per instructions of DFCCIL engineer at site. It also includes provision & fixing of maintenance platform as per design given by Engineer -In-Charge at site. The Item includes cutting of Signal post if required by Site In charge.
14
6704
93867.48
Erection of Position Light Shunt signal with Base, Post, Signal unit, complete fixing of LEDs and wiring of full signal. It includes fixing of Number Plates. The work shall be done as per instructions of DFCCIL engineer/Incharge of the work at site.
8
1084
8677.52
Fixing of junction type Route Indicator on top of signal post and complete wiring .1-Way/2-Way/3- Way/4-Way/5-way/6-Way/theatre type.
7
1268
8877.82
Supply , Fabicration and Fixing of Retro-Reflective marker/boards/Plates as per following :'P' 34 Marker -Non illuminated,'AG' marker -Non illuminated ,'A' marker -Non -illuminated and 'G' marker-Non- illuminated as per DFCCIL approved Drawing.All material required for the job such as MS angle, nuts&bolts, Paint & painting materials etc. will be supplied by contractor.
50
1012
50603
Supply , Fabicration and Fixing of Calling On Board/BSLB Board as per DFCCIL approved Drawing ,on concrete foundation and painting with Retro-Reflective paint.All work to be carried out with contractor own materials and as per DFCCIL site Engineer instructions.
14
9248
129475.22
Supply , Fabicration and Fixing of Retro-Reflective Signal Number Plates as per DFCCIL approved Drawing. On Signal Post with Contractor's Own Material like clamp.U bolts Nuts etc.
14
849
11887.68
Plastic cover for 4 Aspect signal unit cover opened from Front side and bottom side and made of black polythene sheet of 100 micron thickness size: 1700mmX460mmX250mm. On back side 75mm wide corner 37 to corner diagonal cross mark of silver colour of 100 micron thickness to be provided tie up cover with signal unit suitable nylon rope of 5mm dia and 4 meter length to be provided on front side & of 1.5 mtr length at centre.Note:- 1. Sample must be approved before bulk supply.2. Dimensions are approximate to the extent of vary +/-5%. (Inspection by Consignee)
205
149
30680.3
Plastic cover for 3 Aspect signal unit cover opened from Front side and bottom side and made of 38 black polythene sheet of 100 micron thickness size: 1300mmX460mmX205mm. On back side 75mm wide corner to corner diagonal cross mark of silver colour of 100 micron thickness to be provided tie up cover with signal unit suitable nylon rope of 5mm dia and 4 meter length to be provided on front side & of 1.5 mtr length at centre. Note:- 1. Sample must be approved before bulk supply.2. Dimensions are approximate to the extent of vary + -5%. (Inspection by Consignee).
66
133
8794.5
Plastic cover for 2 Aspect signal unit cover opened from Front side and bottom side and made of black polythene sheet of 100 micron thickness size: 1200mmX460mmX205mm. On back side 75mm wide corner 39 to corner diagonal cross mark of silver colour of 100 micron thickness to be provided tie up cover with signal unit suitable nylon rope of 5mm dia and 4 meter length to be provided on front side & of 1.5 mtr length at centre. Note:- 1. Sample must be approved before bulk supply.2. Dimensions are approximate to the extent of vary +/-5%. (Inspection by Consignee).
26
117
3049.54
Demounting and Replacement of Wheel Sensor (Track Device) of Multi-Section Digital Axle Counter (MSDAC)/HASSDAC including disconnection and reconnection of tail cable/sensor cable at TLJB/Mushroom. This 40 includes complete removal of Wheel Sensor (mounted on the rail) along with the tail cable/sensor cable under the rail. The Contractor shall ensure the proper alignment of the Wheel Sensor at the time of mounting the new Wheel Sensor. Wheel sensor shall be supplied by DFCCIL. The work shall be completed as per OEM's guidelines and Technical Requirement & Specification under the supervision of DFC site incharge.
89
1960
174508.53
Supply and installation of earth electrode as per standard practice and as per DFCCIL Drg. no. W1/SG/413 Rev D based on DFCCIL Drawing no. S&T/CONST/6.4/97. It includes supply of GI pipe of 3m length. It includes connecting the earth electrode to the equipments which are required to be earthed including digging of 41 earth pit 3 mtr. deep and fixing earth electrode pipe, casting of cement concrete enclosure with cover (cover as per drawing no. S&T/CONST/6.3/97. It includes installation of 7 strand GI wires as earth lead wires, supported on MS flat size 5mm x 40 mm, soldering and nut bolt both, one end of both earth lead wire and MS flat to earth electrode and other end to Location boxes, block equipments, power equipments, cable sheath, signals etc. as per site requirement and as per instructions given by engineer incharge.
62
3934
243913.58
Refixing of electrical point machine, ground connection during phase working (Non interlocked 42 working) after removing the existing fitting if any, adjustment if necessary, cable termination, wiring, testing and commissioning of electrically operated point, fixing and connecting point indicator on derail switch if necessary. The work shall be done as per extant practice in DFCCIL and the instruction of DFCCIL Engineer at site.
11
4068
44749.76
Supply and Installation of Glass fronted Key box for Crank handle etc.It should be done as per DFCCIL Incharge/Engineer instructions.
6
2803
16820.34
Lettering/Numbering Termination particulars, equipment's names etc., legibly and neatly inside location boxes. Full Case.
95
236
22468.45
Lettering/Numbering Termination particulars, equipment's names etc., legibly and neatly inside location boxes. Half Case.
35
134
4702.6
Lettering and Numbering of all S&T gears like Signals, Loc. Boxes, Pt. Machines, TLJBs, Block 46 joints etc. Each item to be taken as one unit. This work will be carried out as per the standard practice or as per site in charge's instructions. Supply of Material required for execution of work are inclusive. Supply of Material required for execution of work are inclusive.
248
97
24194.88
Painting of two coats of Enamel paint over one coat of Red Oxide primer after scrapping and cleaning of the surface. Paint to be of reputed make Asian/Dulux/Berger or similar. App. Cases inside and outside to be done by Silver colour. (Apparatus Case Full) Supply of Material required for execution of work are inclusive.
48
777
37316.16
Painting of two coats of Enamel paint over one coat of Red Oxide primer after scrapping and cleaning of the surface. Paint to be of reputed make Asian/Dulux/Berger or similar. App. Cases inside and outside to be done by Silver colour. (Apparatus Case Half) Supply of Material required for execution of work are inclusive.
18
707
12726.18
49Painting of two coats of Enamel paint over one coat of Red Oxide primer after scrapping and cleaning of the surface. Paint to be of reputed make Asian/Dulux/Berger or similar. (Main Signal post, base, unit and complete fittings) Supply of Material required for execution of work are inclusive.Nos.271042.4828146.96
27
1042
28146.96
Painting of two coats of Enamel paint over one coat of Red Oxide primer after scrapping and cleaning of the surface. Paint to be of reputed make Asian/Dulux/Berger or similar. (Shunt Signal post, base, unit and complete fittings) Supply of Material required for execution of work are inclusive.
8
444
3556.32
Painting of two coats of Enamel paint over one coat of Red Oxide primer after scrapping and 51 cleaning of the surface. Paint to be of reputed make Asian/Dulux/Berger or similar. (Point machine and ground connections, point machine by Black enamel and ground connection by Red oxide) Supply of Material required for execution of work are inclusive.
11
328
3617.9
Supply of E Type lock Drg. No. S3376 with key Drg. No. 3377 and Tower Bolt for strengthen both side door of RH/ALH at mid side sections. This also includes Hiring of Vehicles for loading of DG set requires for welding lock and tower bolt with other accessory at various places. with and three helpers.
41
6500
266500
Supply of 25mm x 2 mm bare copper strips in the equipment room. Including all accessories & installation.
1640
1223
2005900.4
Routing and termination of 25x2 mm Copper tape/8 mm solid copper round conductor which is to be fixed inside the equipment room with 60mm, 6KVA insulation studs including supply of insulation studs. The separation of the two successive insulation studs should be 600mm apart.
2734
87
239553.08
Routing and connecting all the equipment in the equipment/relay room to SEEB with 10 sq. mm copper cable using copper lugs with stainless steel nut and bolts and fixtures. The work includes laying and routing the copper cable in PVC / conduits and fixing them on wall.
2050
56
114943.5
Supply of 10 sq. mm PVC insulated single core multi strand Copper conductor (RED/Black/Green) as per IS :694/2010 for latest, as per specification number IRS: S-76/89 or latest.
1025
105
107768.5
Supply of 16 sq. mm PVC insulated single core multi strand Copper conductor (RED/Black/Green) as per IS :694/2010 for latest, as per specification number IRS: S-76/89 or latest.
1025
144
148481.5
Supply of Insulation resistance tester, 100 Mega ohms, 500V DC, hand generator (Analog) type. Make Meco/Motwane/Waco.
6
20326
121961.88
Supply of Insulation resistance tester ,10 Mega ohms, 100V DC, hand generator type. Make Meco/Motwane/Waco.
6
17888
107333.34
Supply of Earth Tester (Analog 4 terminal) Range 0-10/0-100 OHMS Double with accessories. Make: Motwane/Meco/Fluke
6
4721
28331.16
Supply of Digital Multimeter for measuring of MSDAC, EI, UFSBI & other S&T equipments parameters. Make & Model: Fluke-287/289 True RMS digital mulitimeter.
6
83332
499992
Supply of Optical Power Meter, type-B, as per TEC spec. GR/OPM-01/03 Feb. 2005 or latest.
2
20226
40453.16
Supply of Auto single fiber fusion splicer machine with all related accessories (i.e. Cleaver, stripper, Heat Shrinkable Protection Sleeves 1000 piece, isopropyl alcohol, cotton etc.) and power supply backup arrangement. Make: Fuzikura.
2
253947
507895.98
Supply of Optical Time Domain Reflectometer (OTDR) as per TEC Spec No.: TEC/GR/TX/OTD001/05/SEP-19 or latest. Make- Yokogawa/ Fuzikura/ Sumimoto.
2
221809
443619.28
Supply of cable fault locator (Metallic Time Domain Reflectometer) complete with all necessary 63 accessories including rechargeable battery pack and charger, Liquid Crystal Display (LCD) with back light for locating faults such as loop and break in various cable such as underground telecom quad cables, signalling cables, telephone jelly filled cables, LAN etc. Low Insulation Faults Mode Max. Range: 20 Km etc. Instrument should supplied with protective nylon carrying bag and operaters manual.
2
155271
310542.6
Loading, Transportation/Carriage and Unloading of various S&T material by a 9 MT truck, from/to 64 the consignee depot to/from various locations, as decided by the DFCCIL. This does not pertain to movement of material required by Contractor for the Scope of work as defined in the contract which has to be done at the own cost of Contractor.
5000
62
311500
Safety Shoes (ISI Marked eith Steel toe) make: Allen Cooper/Karam (Size as per requirement)
40
1782
71319.2
Safety Helmet- Safety helmet heavy duty type with ratchet and heavy-duty holding strap as per ISI mark. Make- Karam/3M
40
720
28839.2
Safety Jacket- Safety Jacket with retro reflecting band in front and back of the jacket for the safety of the person wearing it in the darker area. Make- Karam/3M
40
293
11752.8
Raincoat (Two Piece) Made of heavy-duty synthetic material with waterproof coating inside of coat. Make: Wildcraft/Puma (Size as per requirement)
40
1563
62540
Emergency Rechargeable Led Torch Light with Lantern 4 Lighting Modes, Minimum 4000 mAH Battery with minimum 4 Hrs of Backup. Make- Philips/Eveready. Per Station
40
1690
67600
MUV vehicle (Mahindra Bolero Camper, Mahindra Imperio, Isuzu D max or similar) along with driver with monthly run upto 2500 km per month per vehicle on 24X7 hrs. basis without any holidays/rest are 75 required for transshipment of men and equipment in KCNN-DDUN section of DFCCIL for S&T maintenance Activities and other related works. Vehicle shall have loading capacity and Sitting capacity of 4/6 persons. Vehicles will be based/ headquarter at any designated place under jurisdiction of CGM/DFCCIL/PRYJ(E).
134
62077
8318330.06
Extra KM Charges for running of extra KM above 7500 KM in a quarter per vehicle
20100
10
203613
Provision of different category of Manpower to carry out different S&T Maintenance Activities. (Z Class Station) "Skilled Manpower"
13140
1057
13894367.4
Provision of different category of Manpower to carry out different S&T Maintenance Activities. (Z Class Station) "Semi-Skilled Manpower"
2920
851
2485387.2
Provision of different category of Manpower to carry out different S&T Maintenance Activities. (Z Class Station) "Unskilled Manpower"
8030
739
5936016.9
Provision of different category of Manpower to carry out different S&T Maintenance Activities.(Y Class Station) "Skilled Manpower"
2190
1155
2530216.5
Provision of different category of Manpower to carry out different S&T Maintenance Activities.(Y Class Station) "Semi-Skilled Manpower"
730
912
665957.1
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements