East Central Railway Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
East Central Railway - ECR Tender
Telecommunication Services
Ireps
Opening Date24 Jan 2025
Closing Date19 Feb 2025
Tender Amount₹ 10,96,89,783.79
Technical
Technical
Financial
Technical Capacity
... View More
The bidder must have successfully completed or substantially completed specific categories of work during the last 7 years. The required prior work experience includes completing similar works with values of:
- 30% of the advertised value of the tender for three similar works, - 40% of the advertised value of the tender for two similar works, or - 60% of the advertised value of the tender for one similar work. In the case of composite works, the bidder must have completed similar works for each component of the tender, with values of:
- 30% of the advertised value of each component of the tender for three similar works, - 40% of the advertised value of each component of the tender for two similar works, or - 60% of the advertised value of each component of the tender for one similar work. The similar nature of work includes "Route Relay Interlocking / Panel Interlocking/IBH/Automatic signalling or Electronic Interlocking work" or any indoor or outdoor signalling work involving alteration/modification in these areas.
Costs
EMD
₹ 6,98,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
SG-W-DDU-OT-04-2024-25-DY.CSTE-W-DDU-S AND T/EAST CENTRAL RLYTender No
SG-W-DDU-OT-04-2024-25Tender Authority
East Central Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Group-D (Track Circuits) 05
-
-
123604.95
... More
Group-E (Points) 06
-
-
1205918.42
... More
Group-H (Miscellaneous)
-
-
609804.95
... More
Group-A (Cable Laying) 02
-
-
743766.27
... More
Group-C (Locations) 03
-
-
1482445.49
... More
Group-D (Miscellaneous)
-
-
745824.98
... More
Group-E (Indoor) 05
-
-
1497852.96
... More
Group-G (Signal) 06
-
-
39322.49
... More
Group-I (Dismantling & Releasing) 07
-
-
122339.59
... More
Group-J (Tele Work)
-
-
141433.75
... More
Digging of trenches of 1.2 Mtr. Deep and width of 0.5 Mtr, in all type of soil, as per 01 cable route plan & back filling after laying of cables. This also includes clearing of roots of trees and bushes and temporary obstruction on the selected route, ramming the soil. Where digging of trench of 1.2 Mtr. depth or 0.5 Mtr. Width or both is not possible, the same can be reduced if accepted by site engineer, the payment shall be decreased proportionate to the volume.
8.5
103804
882337.57
... More
Transportation of HDT machine with accessories including handling of stores materials, preparation of site and boring of 110mm dia and placing HDPE pipe of size 63/40mm in single / double / triple etc required for crossing of Railway cables in a combination of quad & signaling cables comprising maximum 72 cores in any HDD section on land / bridges / culverts / track / pucca road crossing and blowing / pulling of Quad / Signaling cables within HDPE pipe. Boring of trench shall be minimum 3 (three) meter below the river bed, 01 (one) Mtr below the track and 1.5 (one point five) meter below other lands including road / pucca road crossing area. This includes supply of 02 permanently lubricated HDPE pipe of size 63/40 mm dia & its accessories suitable for HDT as per Specification GR No. TEC/GR/TX/CDS-008/ 03 MAR-11 with latest amendment & cost of the fuel and all other items which will be required for laying of cable through it. Inspection : RITES for HDPE pipe (for inspection charges on cost of all sort of HDPE pipe is Rs. 195/- per Mtr.) NOTE: The number of HDPE pipes (of any dia as mentioned above) to be pulled in any HDD section will depend upon the numbers of quad / signaling cables to be pulled through that HDD section as per site requirement. At a particular site, the second / additional HDD is to be done only after completing the pulling of 72 cores of cable through 1st HDD other wise the second / additional HDD will not be counted as a new / additional HDD for the purpose of billing.
1000
1269
1269230
... More
Horizontal boring/ manual moling without damage to surfaceroad/ track for laying/insertion of DWC/GI/HDPE pipe. The bore shall be done at the depth of minimum 1400 mm from 03 the ground level. The ground level shall be considered ignoring bank height of the bank of road. Contractor shall provide all material required for work and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damaged due to rough handling or pressure on cable. Payment of boring shall be made only after DWC/GI/HDPE pipe is laid in the bore. Inspection : Consignee
1000
916
916060
... More
Supply of split DWC pipe of outer dia 300 mm / inner dia 260 mm with socket couplar / T-joint wherever required with non flame propogation properties and antirodent repellant properties as per Spec.No. IS:16205 (Pt. 24):2018 with latest amendment. Inspection: RITES. 05
4000
1037
4150560
... More
Installation of split DWC pipe.
4000
59
239120
... More
Unwinding of cable using jack & tindle, pulleys laying of cable in normal cable trench & pipe without any physical damage & twist up to & inside the location box / cabin.
325
8831
2870263.5
... More
Concreting on Railway cables/S&T gears in ratio of 1:2:4 using cement of good quality, 07 sand, stone chips of size 12 mm to be used for concreting purpose along with related massonary work. All materials required for execution of the work will be supplied by the firm as per site engineer. This includes water curing of concreted portion for minimum 3 days. Note : Suitable arrangement for continuous water curing to be ensured. Associated work of digging etc. to be done by contractor.
40
4947
197895.6
... More
Supply & laying of HDPE pipe /telecom duct (outer dia 40mm As per generic 08 requirement No.G/CDS-08/01 Dec'99 or latest at a depth of 1.2 mtr in all type of soil. This includes transportation of HDPE/Telecom ducts from the Railway store to the site and returning left over materials to the Railway store. Inspection : Consignee i) Supply
3
94719
284159.55
... More
ii) Execution
3
7301
21903.06
... More
Installation, erection paying out of tail cable from LB and wiring of Shunt signal LED unit as per technical specification. This includes supply of Non Metalic (FRP) Shunt signal housing multi unit type (without lenses, lamps & signanal transformer) with base & post for Railway signalling 10 suitable for RE area compatiable to LED signal unit as per RDSO Drg. No. SA-24351 (ADV) or latest and as per RDSO Spec No. RDSO/SPN/194/2006 version 1.0 with latest amdt. FRP material Spec No. as per RDSO/SPN/151/1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Inspection: RITES. NOTE:- Installation, erection & wiring of signalling unit includes LED signal lightining unit. a) Supply 11
42
14169
595104.72
... More
b) Execution of above supplied item.
42
469
19726.14
... More
Installation, erection paying out of tail cable from LB and wiring of Shunt signal LED unit on the same post below the main signal as per technical specification. This includes supply of Non Metalic (FRP) Shunt signal unit (without lenses, lamps, base, post and signal transformer) as per RDSO 12 Drg.No. SA-23840/ADV/Alt-2 or latest. Material to be procured from RDSO's approved firm only. NOTE:- Signal unit should be compatible to 'LED type Inspection: CONSIGNEE. NOTE:- Installation, erection & wiring of signalling unit includes LED signal lightining unit including Current regulator & health monitoring unit. This also includes provision of offset bracket and protection of unit from rain water. a) Supply 13
1
7442
7442.18
... More
b) Execution of above supplied item.
1
579
579.86
... More
Installation, erection and wiring of CLS unit, LED unit including paying out of tail cable from Location Box and earthing of CLS (LED type). This includes supply of Non Metalic (FRP) Color light signal housing multi unit type for Railway signalling suitable for RE area, 3 aspect complete (without 14 lenses,lamps and signal transformer) as per RDSO Drg. No. SA-23002/A/M/ADV,ALT-8 and as per Spec No. RDSO/SPN/194/2006 (version 1.0) with latest amdt and FRP material as per RDSO Spec No. RDSO/SPN/151/1997 or latest. All drawings should be as per latest. Material to procured from RDSO's approved firm only. NOTE:- Signal unit should be compatible to 'LED' type. Inspection: RITES. NOTE:- Installation, erection & wiring of signalling unit includes LED signal lightning unit including current regulator This also includes protection of unit from Rain water. a) Supply 15
1
31857
31857.53
... More
b) Execution of above supplied item.
1
2185
2185.22
... More
Preparation & printing of Station Working Rule Diagram (SWRD) on AUTO CAD based on approved SIP, ESP etc. as per the extant practice being followed in E.C.R. Contractor shall supply 16 one print of the SWRD (paper print size as required) as draft for approval and comments. Once the approval is given shall tracing of the SWRD on good quality film paper of thickness not less than 75 micron for signature of all officials. On approval the contractor shall supply 10 copies blue print of the tracing. The approved SWRD shall be finally supplied in 2 CDs.
1
3684
3684.03
... More
Preparation of Station Working Rule (SWR) in English and Hindi based on approved SIP, 17 ESP etc. as per the extent practice being followed in E.C.R. The contractor shall supply two paper print of the SWR as draft for approval and comments .Once the approval is given he shall supply two paper prints of the SWR for final approval and signature of the concerned official.
1
14514
14514.7
... More
Supply of basic material to construct unit maintenance free earth as per RDSO spec.No. RDSO/SPN /197/2008 with latest amdt consisting the followings:- (Inspection: RITES) (i) 18 copper bonded steel electrodes of 3.0 meter long & 17.0 mm dia with Cu-bonding thickness of min. 250 microns and UL listed and marked = 1 no. (ii) Earth enhancement material supplied in sealed bags of min. 10Kgs = 3 nos. (iii) Cu-strip 150 X 25 X 6 mm to terminate earth rod = 1no. (iv) Cu-strip 300 X 25 X 6 mm (MEEB) = 1 no. (v) Cu-strip 150 X 25 X 6 mm (SEEB) = 1 no.
60
8874
532447.2
... More
Supply of 35 sq.mm multistrand single core PVC insulated Copper cable as per IS:694 for connecting main earth electrode to MEEB in the equipment room in duplicate Inspection: Consignee
1200
301
362016
... More
Bare Relay Base Plates for fixing of Relays corresponding with design concept to be offered. Manufacturer's quality assurance certificate to be submitted. Inspection-RDSO. i) Base Plate for Major Group Relays. 23
30
16349
490493.4
... More
ii) Base Plate for Mini Group Relays. Inspection-RDSO. 24
1000
661
661500
... More
iii) Base Plate for Lamp Proving Relays. Inspection-RDSO.
10
523
5237
... More
Indoor cable of suitable core (1 x 60C x 0.6mm dia) as per IRS-S-76/89 with latest amendment Inspection-RDSO.
5
206058
1030290.9
... More
Indoor cable of suitable core (1 x 40C x 0.6mm dia) as per IRS-S-76/89 with latest amendment Inspection-RDSO.
5
140391
701957.65
... More
PVC Jumper cable as per IRS-S-76/89 with latest amendment. Inspection RDSO. i) Jumper Cable of suitable dia for jumpering (1 x 0.6 mm dia)
30
4391
131736.3
... More
PVC Jumper cable as per IRS-S-76/89 with latest amendment. Inspection RDSO. ii) Jumper Cable of suitable dia for jumpering (1 x 1 mm dia)
15
11975
179639.25
... More
Supply of Indoor relay equipment indicating the number of relays of each type for the RRI as detailed below : Inspection-RDSO. i) Supply of Plug in type Point Group Relay. Siemens make (No. RSSK 3515/19) with latest or similar.
30
101841
3055239.3
... More
ii) Supply of Plug in type Route Group Relay. Siemens make (No. RSSK 31/0002) with latest or similar. Inspection-RDSO.
51505.93
30
1545177.9
... More
iii) Supply of Plug in type Main Signal Group Relay for 3 Aspect Signals Siemens make (A-RT-RGA067- for LED lamps) with latest or similar. Inspection-RDSO.
1
66772
66772.49
... More
iv) Supply of Plug in type Shunt Signal Group Relay for Dependent & independent Shunt Signals Siemens make (A-RT-RG- A065- for LED lamps) with latest or similar. Inspection-RDSO.
20
56599
1131982
... More
v) Supply of Plug in type Neutral Relay including repeating relays (Mini Group) Siemens make (No. RSSK 30/0011) with latest or similar.
200
8377
1675578
... More
vi) Supply of Plug in type AC immunized Relays (Mini Group) Siemens make (No. RSSK 30/0078-I) with latest or similar. Inspection-RDSO.
75
9552
716400.75
... More
vii) Supply of Plug in type Interlocked / Latched Relays (Mini Group) Siemens make (No. RSSK 30/00121) with latest or similar. Inspection-RDSO. 36
75
9312
698473.5
... More
viii) Universal ECR Siemens make (No. A-RT-RG-A064) for LED Lamp. Inspection-RDSO.
45
7800
351037.35
... More
ix) Supply of Point controlling/ Chain Relay Siemens make (No. RSSK 3515/3) with latest or similar. Inspection-RDSO. 38
5
39841
199206.25
... More
x) Supply of Key Lock Relay 60V Inspection-Consignee.
30
8406
252201.9
... More
xi) Supply of Time Element Relay. Time Element Relay (Clock work type) AG timer Siemens make (No. RSSK 30/0052) with latest or similar. Inspection-Consignee.
10
9061
90613.3
... More
Supply of Crank Handle Interlocking arrangement complete as per specification Inspection-Consignee.
-
-
40
... More
Supply of disconnect type terminal, screwless, 2 IN 2 OUT (as per 41 Spec.No.RDSO/SPN/189/2004 or latest) along with all accessories including seperators, channel (steel carrier rail), number tag, looping arrangement and end stopper for fixing on Cable Termination rack / Location boxes for Cable Termination purpose. Inspection- RITES
4000
85
340320
... More
Fixing and installation of above disconnect terminal ( Wago or Similar) on relay rack/CTR/location with steel carrier rail.
4000
1
6240
... More
Supply of steel carrier rail ;35 x 7.5mm,1mm/0.039 in thick, unslotted similar to Wago part No. 210-229/PW11-0000. Inspection: Consignee.
200
189
37820
... More
Supply & installation of OFC termination box for 24 fiber cable and splicing of fiber with pig tails, cables as per specification drawing and stipulation of tender document. This includes testing of OFC, supply of Teak wood plank, aluminum ladder etc. Inspection-Consignee.
2
12772
25545.74
... More
Supply & installation of OFC joint closure of TEC specification No. G/OJC 02/01/Mar'99 45 with latest amendment & splicing of 24 Fibre Optic Fibre Cable this include of jointing pit (RCC & Pre- febricated) & testing and keeping in the pit then filling the pit by sand. The work will be done as technical specifications and as advised by site engineer. Inspection-Consignee.
2
18221
36443.56
... More
Supply & installation of OFC distribution frame as per Spec. DOT/G/FDF 01/01, Jan'93 or latest and splicing of OFC inside the termination box with provision of taking out fibers of OFC as 46 required and testing of all fiber. This includes supply and fixing of hard wood board of size 3Ft x 5Ft x 1.5In with wall fixing arrangement and all accessories, fixing of hard wood board of size 3Ft x 5Ft x 1.5In etc. as required, work will done as per latest railway guideline and advise of site engineer. Inspection-Consignee.
2
25999
51999.98
... More
Laying of Optical Fibre cable through HDPE / Telecom duct for OFC by blowing as per latest Railway guidelines and advised by site engineer.
3
15664
46994.13
... More
Supply of non- deteriorating type low voltage cartridge fuse as per spec. no. IRS/S/78/92 or latest. Round head type 2 Amp. Capacity from reputed & RDSO approved vendor. Inspection : RDSO
400
35
14284
... More
Supply of Indicating type low voltage non-detoriating fuse link as per Spec. No. IRS- S:80/92 with latest amendment. Inspection-RDSO. i) Fuse Capacity 0.6 Amp 50
200
53
10686
... More
ii) Fuse Capacity 1.6 Amp 51
600
53
32058
... More
iii) Fuse Capacity 6 Amp 52
50
126
6308.5
... More
iv) Fuse Base Capacity 0.6 Amp 53
200
64
12926
... More
v) Fuse Base Capacity 1.6 Amp 54
600
64
38778
... More
vi) Fuse Base Capacity 6 Amp
50
229
11460.5
... More
Supply of resettable P.T.C. Fuse 2A,120V /2.5A, 30V Similar to 30R 25CU. Inspection- Consignee. 56
200
94
18830
... More
Supply of resettable P.T.C. Fuse 6A, 16V Similar to 16R1600CU. Inspection-Consignee. 57
100
52
5274
... More
Supply of resettable P.T.C. Fuse 16A, 110V. Inspection : Consignee
40
68
2742.8
... More
Supply of Fire Alarm System consisting of :i) Supply, Installation, Testing and commissioning of UL/ FM/Vds/LPCB approved microprocessor/ Microcontroller PLC based Addressable and modular type of Fire Alarm Control panel with display, in-built charging facility and provision of 58 GSM Module suitable to send SMS to configured mobile numbers. The control panel software to be asper RDSO/SPN/217/2018 Ver 2.0 or latest, clause no. - 4.9.16. It should have provision of sufficient I/P & O/P ports as per RDSO Spec. Clause no. 4.9.6. The control panel shall be the central processing unit of the system, receiving and analyzing signals from probe type bimetallic heat detectors, UV & IR flame detectors, Heat and Smoke multi sensors, LHS/LHD Interface and manual Call Points, providing Audible and visual information to the user. Control Panel shall be networkable to divisional control over TCP/IP & shall have clock synchronization facility, health and event data shall be logged with date & time stamp which can be downloaded through PC/ Laptop and also to be interfaced with existing Datalogger, Response time for alarm generation from time of detection by Sensors/detectors shall be less than 10 seconds. ( As per RDSO Spec. No. - RDSO/SPN/217/2021 Ver 3.0 or latest). ( Inspection by RDSO).
1
117701
117701.16
... More
Supply, Transportation, Installation, testing & commissioning of Addressable, 59 Multisensor Detector, Resettable, high level of reliability & high immunity to spurious signal & detector shall be UL/VDS/FM/LPCB listed. The detector shall comply to the RDSO/SPN/217/ 2021 ver 3.0, or latest. Inspection by RDSO.
12
2969
35628.96
... More
Supply, Transportation, Installation, testing & commissioning of , manual call points, resettable, addressable with inbuilt isolator. It shall comply to the RDSO/SPN/217/2021 ver. 3.0 or latest. Inspection by RDSO.
3
3996
11989.08
... More
Supply, Transportation, Installation, testing & commissioning of Hooter cum Strobe as per RDSO/SPN/217/2021 ver. 3.0 or latest. Inspection by RDSO.
2
7122
14244.74
... More
Supply, Transportation, Installation, testing & commissioning of resettable probe type bimetallic Heat sensor as per RDSO Spec. No. RDSO/SPN/217/2021 Ver. 3.0 or latest. Inspection by RDSO.
200
216
43380
... More
Supply, Transportation, Installation, testing & commissioning of, FRLS/FireSurvival 63 Circuit Integritycable ( 2Cx1.5 sq. mm ) i.e. unarmoured copper cable with all accessories for connection of all Fire Alarm Devices as per RDSO/SPN/217/2021, ver. 3.0 para 4.11 or latest. Inspection by RDSO
1
28359
28359.33
... More
Supply and Installation of CO2 Type Fire Extinguisher capacity 4.5 Kg. ISI Mark IS: 15683 operating Temperature (-30 to 50 ) for class 13B type of fire with 1 Mtr. Hose pipe fitted with PVC bent horn complete in all respect.
4
3999
15999.88
... More
Supply, Transportation, Installation, testing & commissioning of Output Module which will provide Potential Free (NO/NC) contact to existing Datalogger. Complying to the RDSO/SPN/217/2016 ver.1 or latest. Inspection by RDSO. 66
1
6501
6501.95
... More
Supply & fixing of fire extinguisher powder type capacity 9 Ltr. Inspection : Consignee
4
3815
15263.24
... More
Multi strand copper wire 1 x 6 Sq. mm (Red & Black) for connecting different source (Power) with Panel & Racks as per IS 2465/1984 & IS 694/1990 with latest amendment. Inspection- Consignee.
2
44577
89154.8
... More
Multi strand copper wire 1 x 16 Sq. mm (Red & Black) for connecting different source (Power) with Panel & Racks as per IS 2465/1984 & IS 694/1990 with latest amendment Inspection- Consignee.
2
122185
244371.4
... More
Multi strand copper wire 1 x 25 Sq. mm (Red & Black) for connecting different source (Power) with Panel & Racks as per IS 2465/1984 & IS 694/1990 with latest amendment . Inspection- Consignee. 70
2
166072
332145.82
... More
Supply of 3 core Indoor Power Cable 2.5 sq. mm . Inspection-Consignee.
100
88
8800
... More
Supply & installation of EARTH Leakage detector 12 channel as per RDSO/SPN/256/2002 or latest with 6 digit counter (in 19' Sub Rack with insulation tester). Inspection- RDSO.
1
178402
178402.84
... More
Supply and installation of Early streamer Emission Lightning Conductor (ESELC) fully autonomous having lower series of energy collecting electrodes upper series of spark - generating electrodes, as in built micro controller for detection of lightning down ward leader and releasing 72 upward ladder at that very precise moment to ensure nuisance free,fail safe, real need based operation any and every time, sealed in stainless steel housing fixed at the center of its central rod which has full electrical connectivity direct up to earth point ,gain in triggering time of 25 micro sec giving 75 meters radius, level high protection, real life & high voltage laboratory tested, CPRI tested Inspection :RITES.
1
348200
348200.77
... More
Supply and Erection of mast/High mast suitable for ESE Technology based lighting 73 protection installation, mechanically robust, good corrosion and fire resistance 5 metre (including 2 metre FRP) long, GI/MS painted, along with guying kit, foundation and other accessories required for installation of the mast. Inspection :RITES.
1
6673
6673.89
... More
Supply, and laying of 70 sq. mm PVC insulated flexible tinned electrolytic copper down conductor placed in a metalic/PVC protective covering wherever exposed to human intervention including saddles and all accessories etc. as required. Inspection :RITES.
20
1218
24361.2
... More
Supply & installation of 'resettable 6 digit LCD lighting stroke recorder/transient event counter with 10 year long life lithium battery in an all weather proof box of IP67 grade protection along with clamps etc. as required. Inspection :RITES.
1
52134
52134.57
... More
Supply and fixing of 'Equipotential Earth Bonding unit' between electrical & equipment earthing in a whether/ explosion proof IP 68 ensoure with inspection chamber for equipotential bonding during a surge. Inspection :RITES.
1
40876
40876.36
... More
Supply and laying of 25 X 3 mm pure electrolytic copper tape through suitable 'class B' G.I. pipe for loop earthing and bonding as per site requirement. Inspection :RITES.
20
1261
25236
... More
Supply of material and installation for making High conductive, Non corrosive, Maintenance free yet repairable 'Electro chemical Gel earth pit using earth enhancing compound of 30 78 kg kit, CPRI tested ROD of 3 inch dia, 8 ft long and 0.12 inch thick made of K type electrolytic copper with top removal gel filling cap. seepage holes, stainless steel fastners, HDP Lockable earth pit cover cum inspection chamber and all required accessories including design modifications, to achieve the required earth termination rod resistance value below 2 ohms. Inspection :RITES.
1
95765
95765.16
... More
Supply & installation of class "B" & class "C" surge protection device for signle phase as per TT network housed in polycarbonate box with IP 65 protection as per RDSO/SPN/ 144/2004 specification or latest. Inspection-RDSO.
2
45753
91507.2
... More
Supply & installation of class "C" pluggable type surge protection device for single phase with visual indication and potential free contacts suitable for 110V AC/DC application with neutral system for as per RDSO/SPN/165/2004 specification or latest. Inspection-RDSO.
5
19601
98007
... More
Supply & installation of class "D" pluggable type surge protection device for single phase with visual indication and potential free contacts suitable for 24V DC application with neutral system for as per RDSO/SPN/165/2004 specification or latest. Inspection-RDSO.
6
17151
102907.32
... More
Supply & installation of class "D" pluggable type surge protection device for single phase with visual indication and potential free contacts suitable for 60V DC application with neutral system for as per RDSO/SPN/165/2004 specification or latest. Inspection-RDSO. 83
2
17421
34842.48
... More
Supply of TSR Table and accessories Inspection : Consignee.
1
208945
208945.11
... More
Supply of Pipe Lock and Key with 'C' clamp, height 85mm dia 16.5mm complete set as per sample at consignee end. Drg No. SG/MGS/SK, No. 4-2011. Inspection : Consignee.
45
204
9220.05
... More
Supply, installation, testing, commissioning of Data Logger along with networking in existing system of division for Railway S&T installation as per RDSO Spec. No. IRS:S-99/2006 with 85 1024 Digital inputs and 64 Analog inputs with supply of required EI modems, protocol converter, Dualcard RS 232 to E1 converter etc. Data Logger to be provided with suitable PC with extra 1 TB storage device, laser printer hp-1020 & furniture. Note: All materials & equipmets required for installation, testing, commissioning & Networking with Control to be supplied and done by the firm. Make- Efftronics or similar Inspection- (RDSO- Data Logger), Consignee.
1
411867
411867.52
... More
Detail Testing and Wiring including functional testing, selection table testing with simulation panel through. a) DN Hump
1
77324
77324.69
... More
Commissioning of Relay Interlocking system. The work to be carried out by engineer of OEM a) DN Hump 88
1
481218
481218.49
... More
Supply of Euro clean or similar WD-wet & dry Vacuum cleaner. Inspection- Consignee. 89
1
14155
14155.84
... More
Supply of Krone tool. Inspection- Consignee
1
3038
3038.55
... More
Supply of 500V/100V, 1000 M-ohm insulation tester. Make- Meco DIT 918 or Superior Inspection- Consignee
1
9043
9043.19
... More
Supply of AC/DC digital true RMS clamp meter 3-3/4 digit (6000 count) AC/DC Amp 0- 91 200 Amp AC/DC voltage 0-600 V resistance 0-60 MEGA Ohms frequency 0-999 KHz capacitance 0-40 MPD JAW opening 55 mm model 2003 A make -metrix or metravi brand model NO- DT-9250 or similar. Inspection- Consignee
2
6140
12281.64
... More
Digital earth resistance tester, 1000 Ohm with rechargable battery with kit for earth resistance Fluke /Motwane /Sigma) Inspection- Consignee
2
7076
14152.42
... More
Supply of Digital multimeter 3 3/4 digit Auto ranging digital multimeter with AC/DC 93 voltage +AC/DC current & Resistance + Analog + barograph + Diode + Continuity + Capacitance + Frequency + Min/Max Storage + Data hold + Temp + Duty + Rubber hoiser make Fluke or similar. Inspection- Consignee
2
9881
19762.08
... More
Annunciator eight lines (fabricated material for Railway communication) Inspection- Consignee.
2
13728
27457.5
... More
Supply of Push Button telephone as per DOT Spec. No. DOT/TEC/G/TEL-02/02 Dec'95 or latest Inspection-Consignee.
4
1860
7441
... More
Supply and installation of 20 pair CT Box with 24 nos. wago terminals and termination of cable as per IRS/TC/18/75 with latest amendment. Execution of work as per site requirement and instruction of site Engineer. Inspection: Consignee.
20
2272
45441
... More
Supply and Installation of Public Addressing System Inspection-Consignee. i) Supply & Installation of Amplifier TZA 250 Watts Model No. SSA-250. Make Ahuja or Similar along with control panel
1
19032
19032.47
... More
ii) Supply & Installation of Microphone Model No. SHM 1000 XLR with 40M Cable & stand of Ahuja Make or similar
1
6454
6454.9
... More
iii) Supply & Installation of Loud Speaker (HORN) 30 Watts Model No. UHC-30 X 7 with driver unit of Ahuja make or similar along with MS Clamp
4
4460
17842
... More
iv) Supply & Drawing of PVC insulated Screened Tinned Copper conductor 2 core, 1.5 sq. mm cable.
1500
60
91395
... More
Supply of PVC switch board cable, 10 pair twisted, conductor of size 0.63 mm. dia Annealed copper conforming to IRS-TC-24/91 or ITD 1138 or latest. Inspection-Consignee.
500
24
12285
... More
Prewiring and carrying out Jumpering as per approved circuit diagrams soldering, dressing etc. a) DN Hump
1
458763
458763.03
... More
Design of PI system complete including detailed circuit & wiring diagram for relay interlocking system on the basis of approved signalling plan, Process Flow Diagram, control table as 103 per CSTE's latest instruction / circular and latest practices. This includes preparation of the following by the contractor : Contract analysis chart, Relay disposition chart, Fuse analysis chart, Relay registers with latest amendment, supply of circuits & wiring diagrams, Design of selection table, Route selection plan, Square sheet chart, PFD etc. Note- Design to be made by engineer of OEM of Metal to Metal relay, Selection table is to be authenticated by engineer of OEM before submission to Railway. Preparation of Panel face diagram as per Spec. No. IRS-S-36*87 with modifications. Approved Signalling plan will be supplied by Railway. Design and circuits to be submitted in Autocad & finally in CD & pen drive. In addition to this, drawing to be submitted in Polyester film tracing with 6 Ferro copies of completion drawing out of this two set to be submitted in laminated plastic cover. a)DN Hump
1
595012
595012.99
... More
Supply of Domino type Operating Panel as per approved PFD, exchangeable domino units (size 54mm x 34mm) a) DN Hump . Inspection : Consignee 105
2
653558
1307117.42
... More
Transportation of materials by 15MT capacity truck.
5000
88
443300
... More
Supply of 200 way Tag Blocks as per RDSO Spec.No. IRS-S 77/2006 (Rev-1) with latest amendment for connection between racks and other components / equipments. Inspection- RDSO.
250
1661
415335
... More
Supply of 96 way Tag Blocks as per RDSO Spec.No. IRS-S 77/2006 (Rev-1) with latest amendment and Drg.No. LSA 24753 for connection between racks and other components / equipments. Inspection- RDSO.
60
1518
91129.2
... More
Supply of Godrej Interio revolving chair with arm synchronic tilt mechanism (Make - Godrej Interio Apo Marvel High Back Chair) or similar / better. GeM Product Id : 5116877- 41314003521. Inspection-Consignee
2
24763
49526.4
... More
Supply of Godrej Interio revolving chair with arm only revolving without tilting mechanism (Make - Godrej Interio Diva Revolving low back chair with fixed loop arms) or similar / better. Inspection-Consignee.
4
5801
23207.28
... More
Supply of Godrej Interio Executive Table with both side pedestal unit (Godrej interio Enzo 5026 - 1500 x 750) or similar / better. GeM Product Id : 5116877-57078893032. Inspection- Consignee.
2
21196
42392
... More
Supply of Cable Termination rack with complete strips and scaffolding materials indicating number of termination and detailed description of gears. (as per Siemens practice) Inspection-Consignee.
6
31016
186096.24
... More
Supply of Relay rack (to suit the design concept of the installation) & IDF with complete scaffolding materials, indicating number of racks, nomenclature of relays, termination etc. and their ancilaries. (as per Siemens practice) Inspection-Consignee.
30
31128
933859.8
... More
Installation, Erection of Relay Rack, IDF with scaffolding arrangement, Cable Termination Rack with proper fitting arrangement, Operating panel, etc.
1
40757
40757.82
... More
Supply of Flasher Relay Mercury type to operate on 220V AC. As per Siemens design or similar.Manufacturer's quality assurance certificate to be submitted. Inspection-Consignee.
1
162572
162572.38
... More
Installation of unit earth which includes the followings: (i) drilling the earth to therequired depth (ii) insertion of electrode (iii) Filling of earth enhancing compound (30Kg). Provision of exothermic weld connection on copper tape/bus bar of 25mm X 6mm X 150mm to the earth electrodes. All the materials, tools and features required for the weld to be arranged by the contractor. (iv)Trenching , laying & Provision of exothermic weld connecting, one to connect copper tape/ 35 sqmm multi strand single core PVC insulated copper cable to the copper strip/ tape/ busbar welded to the earth electrode and another to the copper tape to be fixed inside the equipment/relay rack /apparatus room as per RDSO's Spec (fixtures for mounting the copper tape inside the relay room, weld materials, tool features and all other materials required for the weld shall be arranged by the contractor. (v)exothermic weld connection, fixing of Cu-strips and routing the cables to bus bar in equipment/relay room (all other materials required for the work shall be borne by the contractor). (vi)construction of concrete chamber as per RDSO Spec. (vii) any other material said required as per RDSO Spec. NOTE- 1) Above includes Interconnection of the earthing installed with the already existing earthing electrode, if any, as per site requirement and as per instruction of site incharge. 2) All materials required for complete installation of maintenance free earth to be supplied by contactor. Per
60
6385
383122.8
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%