Dr Shakuntala Misra National Rehabilitation University Tender

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engireer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5mm thickness (weight not less than 12.50kg/sqm) DSR,-21.3.2/2018 (Area - 34.83 Sq. Mt.)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tabular sections/appropriate Z sections and other sections of approved make confirming to IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at rubber/neoprene gasket etc. Aluminium sections shall smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C,P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): Anodised aluminium (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR.-21.1.1.1/2018) (Area - 263.93 Sq. Mt.)

For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) Anodised aluminum (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) - (DSR.-21.1.2.1/2018) (207.00 KG)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand oho embossed on the body/plate with double spring mechanism and door weight upto 12kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness DSR.-21.4.1/2018) (06.00 Nos)