Dr Ram Manohar Lohiya National Law University Tender

providing and laying vitrified floor tiles in different sizes with water abosorption less than 0.08% and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement motar 1:4 ,jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement and matching pigment etc. complete

providing and laying rectified glazed ceramic floor tiles of size 300*300 mm or more of frist quality conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement motar 1:4 ,jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement and matching pigment etc. complete

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq meters and under including cutting the patch in proper shape ranking out joint and preparing and plastering the surface of the wall complete including disposal of rubbish to the dumping ground all complete as per direction of engineer in charge. with cement mortar 1;4

Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221-

Reparing of aluminium fluted strip sheet covering over expansion joint with iron screws all complete if any material required and the directions of engineer in charge

Provinding isi marked flush door shutters conforming to is 2202 non decorative type,core of block board constrution with fram of 1st class hard wood and well matched commerical 3ply veneering with vertical grains.

Provinding wood work infromes of door window clerestory window and other frames wrought framed fixing in position with hold fast lugs or with fasteners of required dia and length.

Fixing chowkhats in existng opening inluding embedding chowkhats in floors or walls cutting masonry for holdfasts embedding hold fasts in cement concrete blocks of size 15*10*10 cm with cement concrete 1;3;6 painting two coats of approved wood preservative to side of chowkhats and making good the damages to walls and floors as required complete. Door chowkhats

Providing/repairing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):and including cost of glass pannel. all complete work window size 1.5x3.5

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm.

Providing and applying crystalline mortar by mixing in the ratio of 4.5: 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 ?45 MPa and adhesive bond strength Class R3 ?1.5 MPa. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat

Providing and fixing 600x450 mm beveled edge mirror of glass (of approved quality) complete with 6 mm thick hard boardsuperiorground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angels 40x40x6 mm for diagonal braces