Dr Ram Manohar Lohia Institute Of Medical Sciences Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Dr Ram Manohar Lohia Institute Of Medical Sciences - RMLIMS Tender
Paints and Enamels
Eprocure
Opening Date21 Nov 2022
Closing Date12 Dec 2022
Tender Amount₹ 1,00,00,000
Costs
EMD
₹ 5,00,000Document Cost
₹ 2,360Tender Fee
Refer Documents
Summary
Enlistment And Empanelment Of Venders And Making Annual Rate Contract Arc For Carrying Out Civil Maintenance Works
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_RMLIM_751485_1Bid Award Id
ViewTender No
3337/RMLIMS/C/2022Tender Authority
Dr Ram Manohar Lohia Institute Of Medical Sciences ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
NIT for enlistment and empanelment of venders and making Annual Rate Contract ARC for carrying out civil maintenance works
Tender document with technical specification, Terms and conditions etc.
BOQ Items
Removing broken/damaged glass panes from door/windows, shutters, fixed glazing, louvers etc. and providing & fixing approved glass panes, in broken/ steel/ aluminum frames including necessary beading, putty, gaskets, nails, aluminum clips/ rubber bidding, solution, bolt etc.and finishing of beading with paint/polish to match the adjoining surface, disposal of glass & debris complete as directed. by Engineer Incharge. (Actual area of new glass fixed shall be measured) (Buidling may be multistoryed and window/ ventilator may be inside/ outside of the building) - 4mm glass panes (Plain/ pinhead) . (1.03)
1
-
-
Same as above but 5 mm glass panes (Plain/ pinhead). (1.03.1)
1
-
-
Same as above but 5mm Reflective glass over curved trusses. (1.03.2)
1
-
-
Same as above but 5mm wired glass. (1.03.3)
1
-
-
Same as above but 6mm Toughened glass. (1.03.4)
1
-
-
Same as above but 8mm Toughened plain glass. (1.03.5)
1
-
-
Same as above but 12mm Toughened glass. (1.03.6)
1
-
-
Removing of damaged putty or rubber gasket and Providing & fixing new putty or rubber gasket in proper shape on existing fixed glass panes at all levels including supply of all Labour, materials, tools and plants etc. required for Proper completions of work as per direction of Engineer In-charge. (1.04)
1
-
-
Removing broken or damaged mirror sheets fixed on wall over the Asbestos/Hard Board Sheet backing and providing & fixing new approved Quality 5.5mm thick mirror sheet with chrome plated cup Screws etc. disposal of broken glass, debris, complete as directed by Engineer In charge (actual area of mirror sheet to be measured). (1.05)
1
-
-
Removing damaged backing of mirror and providing & fixing Approved quality 6mm thick asbestos sheet backing for Mirrors including necessary screws, plugs, drilling holes, disposal of removed materials & debris complete as directed by Engineer In charge (actual area of asbestos sheet to be measured) (1.06)
1
-
-
Regrouting loose holdfasts by dismantling required Masonry/C.C. Block necessary welding / screws / riveting etc, re-grouting hold fast in C.C. block 1:2:4 (1cement:2coarse sand:4coarse aggregate) of required size, finishing with plaster in 1:4 cement coarse sand mortar to match, curing, disposal of debris, complete as directed by Engineer In charge (per hold fast). (1.07)
1
-
-
Providing, fabricating & fixing wood work (Teak wood/ sal wood) of required Section, size & shape for repairs of existing wood work or For addition/ alteration etc. including preparation of old Work for joining new work, necessary nails, screws, adhesive, hold fasts, grouting, painting with anti termite Paint on surface in contact with building work, primer & 2 Costs approved enamel paint or polish on exposed surface labour, T&P etc. complete as directed (finished length & rectangular cross section of members actually fixed shall be measured by Engineer In charge. (1.08)
1
-
-
Providing & fixing door, windows composite glazing of All types, fabricated out of anodized extruded heavy duty, Aluminum sections (door sections minimum 3 mm thickness and window section/Fixed partition/composite minimum thickness 2 mm) of standard Hindalco/Jindal ISI Make & sizes (anodized Natural to minimum 25 microns), including beading, gaskets, glass Panes, screws, hold fasts, 75x25mm size T.W. false frame for fixing, necessary hinges, locks, concealed tower bolts & Other hardware of approved make etc, complete including sealing of sides with masonary/RCC and making the joint watertight to avoid ingress of Dust/Rain water {All measurement shall be for out to out aluminum frame Dimensions only) as per directions of Engineer In charge. Fully glazed or partly glazed and partly panelled with novapan (12mm pre laminated on side)} (for structure glazing). (1.09)
1
-
-
Removing damaged pressed steel/angle iron/ ‘z’ Section door or window frames from existing location including cutting, wielding, removing hold fasts & cleaning & disposal of all removed Material/debris, complete as directed by engineer In-charge. (1.10)
1
-
-
Providing & fixing pressed steel door/windows frames made out of 1.25mm thick CRCA sheet including necessary hold fasts, primer coating, welding to old Members, grouting of hold fasts in CC bed block 1:2:4, Finishing, etc. complete as directed by Engg. I/c, (Signle / double rebate type overall size upto 100x50mm.) (1.11)
1
-
-
Providing & fixing flush door shutters 30mm thick of approved make of Cellular core construction with frame of first class hardwood & 3mm thick commercial ply veneering on both faces of Shutter as per BIS Standards, with butt hinges, necessary screws, welding etc. Complete as directed by Eng. I/c. (1.12)
1
-
-
Providing and fixing 35 mm thick flush door shutters decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters as per BIS Standards including BIS Marked stainless steel Butt Hinges, steel screws etc. complete including supply of all materials, labour & T&P complete as per directions of Engineer-in-charge. (1.13)
1
-
-
Extra for providing vision panel In all type of flush doors including the cost of Teak beading & 5mm plain glass pane. Note: The actual area of opening made for vision pannel shall be measured. (1.14)
1
-
-
Extra for providing frostings on glass panes of 5.5mm thick and above instead of ordinary glass panes respectively in doors, windows and clerestory window shutters, partitions & railing (Area of opening for glass panes excluding portion inside rebate shall be measured) (1.15)
1
-
-
Extra for providing etching on glass panes in doors, windows and clerestory window shutters, partitions etc in desired pattern complete as per drawing and as directed. (Area of etching shall be measured for payment). (1.16)
1
-
-
Providing & fixing lipping of 2nd class teak wood size & shape as required with necessary glue, nails, etc & two coats of French polish complete as directed by Engg. I/c (finished Length & rectangular cross section of members actually fixed shall be measured) as per sectional area size upto 500 sq. mm. (1.17)
1
-
-
Providing fixing 19 mm thick commercial block board of BIS make Century, Corbet, National Green, Kit ply etc. shutters on cup board by removing existing old/worn-out/damaged shutters as per required size and shape including supply of all labour, materials, tools and plants etc. required for proper completion of the work as per direction of the engineer-in-charge. (1.18)
1
-
-
Providing & fixing 1mm thick PVC sheet of approved make & shade laminate on Shutters, Commercial Board etc., with necessary glue, etc. (Actual area of laminate to be measured) including cost of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer In charge. (1.19)
1
-
-
Removing and re-fixing of fixed glass panes for painting of window frames and grills whenever directed including supply of all consumable materials such as screws, gaskets, beading etc. labour and T & P required for proper Completion of the job as per direction of the engineer-In-charge. Incase the removed glass is damaged, the same shall be replaced by a new glass at the cost of the Contractor. The measurement shall be for the actual area Of glass removed/ re-fixed. (1.20)
1
-
-
Removing damaged and providing and fixing new 6mm. thick approved quality ply wood sheet with fevicol, nails etc. as per requirements including polishing / painting to match with existing as directed. (1.21)
1
-
-
Removing damaged and providing and fixing new 8mm. thick approved quality ply wood sheet with fevicol, nails etc. as per requirement including polishing/painting to match with existing as directed. (1.22)
1
-
-
Providing and filling Silicon sealant around external windows as per drawings, manufacturer's specifications including all cleaning, surface preparation etc. and as directed. (the measurement shall be made proportionate to the actual size provided) (1.23)
1
-
-
Providing & fixingixing m.s. dashfastener of approved quality including supply of all required misc. item as per site requirement & instructions of Engineer Incharge including supply of all labour, T&P etc. complete (75mm to 150mm). (1.24)
1
-
-
SUB SECTION B : FIXTURES (Item Sl. No. 2.01 to 2.34)
-
-
-
Labour charges for removing damaged door closer door spring, mortise lock, night latch, aldrops, baby latch, Mirror, hook & eye, tower bolts, handles, drawer Locks, towel rails, curtain rods, curtain track and chord etc & stacking the same in store as directed by Engineer In charge. (2.01)
1
-
-
Providing & fixing door closer of ISI make (Sandhu / Everite expo or equivalent) with necessary brackets of frames on door shutters at all level, aligning and plaining shutter complete as directed by Engineer In charge. (2.02.1)
1
-
-
Same as above but Aluminium die cast body tubular type universal hydraulic door closer, of approved make with necessary accessories and screws etc. complete. (2.02.2)
1
-
-
Providing & fixing Godrej make locks/latches on door shutters including welding brackets on MS / wood / Aluminium door frames, panting etc, aligning & plaining shutters etc. as required, complete as directed by Engineer Incharge. (2.03)
1
-
-
Providing & fixing approved door spring for existing doors / shutters including welding brackets on MS door frames, painting, aligning & plaining shutters etc as required, complete as directed by Engineer Incharge. (2.04)
1
-
-
Oiling and greasing of existing rolling/collapsible shutters including removing, re-fixing and re-commissioning the cover, pulley, springs and shutters after necessary repairs, fixing of missing / broken handles, locking arrangements etc. and repairing of damaged plaster and touch up in the white wash to match surrounding surface and also providing welding machine at site if required, including supply of all material viz, oil, grease, nut bolts, rivets etc. (only cost of pulley, spring, & MS. pipe shall be paid separately) labour, and tools & plants etc. as required for proper completion of the work as per direction of the engineer in-charge. (2.05.1)
1
-
-
The cost of removing old damaged collapsible / rolling Shutters including frame of any size and shape & Providing/Fixing new shutter of same quality as existing one including cost of all materials, labours & T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (2.05.2)
1
-
-
Removing damaged M.S./S.S. Hinges, providing & fixing new M.S./S.S. Hinges of different type & sizes on wooden, steel or aluminum door / window frames & shutter including screws & necessary welding, aligning & plaining shutters etc. complete as directed by Engineer I/c. all size 75 to 150mm.). (2.06)
1
-
-
Providing & fixing aluminum. Anodized aldrop of size 300mm-16mm dia on door shutters, including aligning & planing shutters, making hole in frames complete as directed by Engineer Incharge. (2.07.1)
1
-
-
Same as above as per item no. 2.07.1 but for 250mm-16mm dia. (2.07.2)
1
-
-
Same as above item no. 2.07.1 but brass oxidized aldrop. (2.07.3)
1
-
-
Same as above but as per item no. 2.07.2 but brass Oxidised Aldrop. (2.07.4)
1
-
-
Same as above but steel aldrop of 300 x 16 mm size. (2.07.5)
1
-
-
Same as abovebut steel aldrop of 250 x16 mm size. (2.07.6)
1
-
-
Providing & fixing M.S. Oxidized aldrop of size 300mm-16mm dia on door shutters including aligning & plaining shutters, making hole in frames complete as directed by Engineer Incharge. (2.08.1)
1
-
-
Same as above as per item no. 2.08.1 but for 250mm-16mm dia. (2.08.2)
1
-
-
Same as above as per item no. 2.08.1 but for 200 -10mm. Dia. (2.08.3)
1
-
-
Providing & fixing MS. Flat 1.5mm thick 20mm wide and 50mm long in regular shape for aldrop or tower bolt, including welding to M.S. frame, painting with primer & enamel paint (2 coats) to match frame, complete as directed by Engineer In charge. (2.09)
1
-
-
Providing & fixing aluminum anodized tower bolt (with barrel & bolts) on Door windows including re-fixing brackets, riveting / welding aligning & plaining shutters etc. as required complete as directed Engineer In cahrge. - Size 600mm x 10mm dia. (2.10)
1
-
-
Same as above but for Size 450mm x 10mm dia. (2.10.1)
1
-
-
Same as above but for Size 300mm x 10mm dia. (2.10.2)
1
-
-
Same as above but for Size 250mm x 10mm dia. (2.10.3)
1
-
-
Same as above but for Size 200mm x 10mm dia. (2.10.4)
1
-
-
Same as above but for Size 150mm x 10mm dia. (2.10.5)
1
-
-
Same as above but for Size 100mm x 8mm dia. (2.10.6)
1
-
-
Same as above but for Size 75 mm x 8 mm dia. (2.10.7)
1
-
-
Same as item no. 2.10 but for 150mm. half round brass ‘T’ bolt with golden screw. (2.10.8)
1
-
-
same as item no. 2.10 but for 200mm. half round brass ‘T’ bolt with golden screw. (2.10.9)
1
-
-
same as item no. 2.10 but for 250mm. half round brass ‘T’ bolt with golden screw. (2.10.10)
1
-
-
Providing & fixing Aluminium Anodized handle of approved make & size 125x15x4 mm on windows / door shutters including re-fixing brackets, riveting, welding, as required complete as directed by Engineer Incharge. (2.11.1)
1
-
-
Same as above as per item no 2.11.1 size 100x10x4mm. (2.11.2)
1
-
-
Same as above but brass oxidized handles of approved make and size 125x15x4mm. (2.11.3)
1
-
-
Same as above as per item No. 2.11.3 but for size 100x10x4mm. (2.11.4)
1
-
-
Same as above as per item no. 2.11.1 but Acrylic handle of size 300x25mm. (2.11.5)
1
-
-
Same as above as per item no. 2.11.1 but wooden fancy type handle. (2.11.6)
1
-
-
same as item 2.11.1 but steel handle. (2.11.7)
1
-
-
Same as item No. 2.11.2 but stell handle. (2.11.8)
1
-
-
Providing & fixing black oxidized MS handle of approved make & size 125x15x4 mm on steel windows/door shutters including re-fixing brackets, riveting, welding as required complete as directed by Engineer Incharge. (2.12.1)
1
-
-
Same as above as per item no 2.12.1 size 100x10x4 mm. (2.12.2)
1
-
-
Providing & fixing MS oxidized hook & eye of approved make and type size 150 mm on windows & frames, including re-fixing brackets, riveting, welding aligning & plaining shutter as required complete as directed by Engineer Incharge. (2.13.1)
1
-
-
Same as above as per item no 2.13.1 but 250mm adjustable type M.S. stay. (2.13.2)
1
-
-
Providing & fixing aluminum anodized adjustable type stay of 300 mm including supply of all material, labour tools and plants etc. required for proper completion of the work as per direction of the engineer in-charge. (2.14.1)
1
-
-
Same as above same as item no. 2.14.1 but 250 mm. (2.14.2)
1
-
-
Providing & fixing brass oxidized adjustable type stay of 300 mm size for wooden windows in wooden or steel frame including supply of all material, labour, T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (2.15.1)
1
-
-
Same as item 2.15.1 but for 200 mm size. (2.15.2)
1
-
-
Providing & fixing brass chromium plated three way pegs of approved quality & make, finishing surrounding and old holes, complete as directed by Engineer Incharge. (2.16.1)
1
-
-
Same as item no. 2.16.1 but peg rail having 5 Pegs. (2.16.2)
1
-
-
Same as item no. 2.16.1 but Nickle polished peg rail having 5 pegs. (2.16.3)
1
-
-
Providing & fixing 24 gauge aluminum sheet to the existing door shutters including cost of nails/screws Fevicol, labour, T&P etc. complete as required for proper completion of the work as per direction of Engineer Incharge. (2.17)
1
-
-
Providing & fixing 20mm dia stoved MS conduit pipe with end brackets in curtain pelmets. (2.18.1)
1
-
-
Providing anf fixing 20 mm dia fancy curtain rod of 1.25 mm thick PVC laminated M.S. pipe with fancy end brackets including supply of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (2.18.2)
1
-
-
Providing & fixing 20mm anodized Aluminium curtain channel with brackets with rollers & guides on curtain pelmets complete as directed by Engineer Incharge. (2.19.1)
1
-
-
Providing & fixing pull chord with chrome plated knobs and other fixtures, in existing curtain channels, complete as directed by Engineer Incharge. (2.20)
1
-
-
Providing and fixing Godrej make four lever, drawer / cupboard locks in steel / wooden drawers complete as directed by Engineer incharge. (2.21)
1
-
-
Providing & fixing hasps & staples (safety type) of approved make & type including supply of all material, labour, T&P etc. as required for proper completion of the work as per direction of Engineer Incharge.(size 90mm. To 115mm. Anodized alluminum). (2.22)
1
-
-
Providing & fixing aluminum heavy-duty floor doorstopper, of approved make & type including supply of all material, labour, T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (2.23)
1
-
-
Same as item no. 2.23 but heavy-duty brass door stopper. (2.23.1)
1
-
-
Providing & fixing wooden cleats type doors stopper as existing of 1st class deodar wood including supply of all material, labour, T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (2.24)
1
-
-
Providing & fixing heavy duty magnet catcher of approved make & type including supply of all material, labour, T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (2.25)
1
-
-
Labour charge for removing damaged door/window shutter & re-fixing in same position with nails screws, aluminum clip and rubber gasket etc. after necessary repairing work as per direction of engineer in-charge. (2.26.1)
1
-
-
Repair of toughened glass doors including adjutments, alighnment,oiling greesing etc. including cost of minor fixtures if any required for proper repairs etc complete. (2.26.2)
1
-
-
Repair of M.S. doors including adjutments, alighnment,oiling greesing etc. including cost of minor fixtures if any required for proper repairs etc complete. (2.26.3)
1
-
-
Providing & fixing anodized Aluminium channel for sliding shutters/ Sliding Glass including supply of all material, labour, T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (2.27)
1
-
-
Providing & fixing rollers & Guides for sliding shutters / Sliding Glass including supply of all material, labour, T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (2.28)
1
-
-
Providing & fixingixing curtains having 100% polyster, Stain retardant fabric, water repellent, bacterial resistant, nylon net, fungus resistant which includes supply of all material & labour, T&P etc. Complete as per direction of Engineer Incharge. (2.29)
1
-
-
Providing & fixing aluminium track channel 30x12 mm size having runners @ 150 mm/ccand fixed with walls at ends and supported from slab by providing and fixing 12 mm dia aluminium suspenders having upper and lower bushes etc. Including supply of a;; material, labour, T&P etc. complete as per direction of Engineer Incharge. (2.30)
1
-
-
Providing & fixing polyster roller blinds of approved quality, shade, design, print and supply of all material, labour, T&P etc. Complete as per director of Engineer Incharge. (2.31)
1
-
-
Providing & Laying wooden flooring with 12 mm thick synchronised, high abrasion resistance wooden tile over a foam sheet below fixed with adhesive, preparing the surface by cleaning of exidting floor, laying & pasting of foam 2.0 mm thick for cusion & then laying of wooden tiles including supply of all material, labour, T&P etc. complete as per direction of Engineer Incharge. (2.32)
1
-
-
Same as above but Providing & Laying wooden flooring with 10.00 mm thick synchronised, high abrasion resistance wooden tiles. (2.32.1)
1
-
-
Providing & Fixing acoustic wall panelling with acoustic tile of 12 mm thick Armstrong or equivalent make fixed over Galvanised section of 75x50 mm size fixed at 600 mm c/c. Filling of 40 mm thick glass wool sheets in between existing wall & acoustic tile panelling including supply of all material, labour, T&P etc. complete. (2.33)
1
-
-
Same as above but acoustic false ceiling with armstrong accoustic tiles of 600 x 600 mm size & of 12 mm thick. (2.33.1)
1
-
-
Providing & Fixing U-PVC door / window frame with shutter of fenesta or equivalent brand having 100 x 60 mm section filled with M.S Glavanised pipe, 5 mm thick glass, rubber gasket for holding glass, glazing clip, necessary lock, S.S hingers, handle etc. Including supply of all material, labour, T&P etc. complete. (2.34)
1
-
-
SUB SECTION C : REPAIRS OF FINISHING, FLOORING, TERRACING ETC. (Item Sl. No. 3.01 to 3.22)
-
-
-
Repairs to plaster in patches at all levels including cutting the patches in proper shape, preparing & smooth plastering the sur face of walls in cement & sand mortar 1:4 including cost of labour, materials, T & P, scaffolding etc. and disposal of rubbish, complete as directed by Engr I/C. (3.01)
1
-
-
Same as item 3.01 but for grit finish plaster of colour & texture as existing, including grooves. (3.01.1)
1
-
-
Repairs to plastered corners at edges, jambs, cills etc. including cutting the surrounding plaster to proper shape as required, preparing & plastering in cement mortar 1:4 including cast of all labor, material, T & P scaffolding etc. & disposal of rubbish complete as directed by Engineer I/C. (3.02)
1
-
-
Repair to flooring, skirting, dado, wall covering, plateform etc. in patches at all levels, including cutting the patches in proper shape, preparation of base, re-flooring with matching materials/ adhesive and size/ Colour as original jointing to match, flooring, curing, all labour, materials, T & P scaffolding, disposal, of unserviceable material complete as directed by Engr I/C. For 5mm. thick white / coloured glazed tiles (Ist class) . (3.03)
1
-
-
Same as above but for 10 mm thick Vitrified tiles 600*600 mm size Double charged (RAK, Jhonson, restile, Regency,somany or equivalent make ). (3.03.1)
1
-
-
Same as above but for 10 mm thick Ceramic tiles all size upto 600*600 mm size (Jhonson, kazaria, Regency, somany or equivalent make ). (3.03.2)
1
-
-
Same as above but for 20-40 mm polished kota stone as per site requirement. (3.03.3)
1
-
-
Same as above but for 6mm thick ceramic tiles (Polished and Unpolished). (3.03.4)
1
-
-
Same as above but for 25 to 50mm thick C.C. flooring 1:2:4. (3.03.5)
1
-
-
Same as above but for PVC flooring 1.5mm to 2mm. thick. (3.03.6)
1
-
-
Same as above but for polished marble 20mm thick with machine cut edges. (3.03.7)
1
-
-
Same as above but for polished granite 20mm thick with machine cut edges. (3.03.8)
1
-
-
Same as above but for PVC wall paper upto 0.9mm thick. (3.03.9)
1
-
-
Same as above but for PVC anti-skid flooring 2.0mm thick. (3.03.10)
1
-
-
Same as above but for PVC antibacterial flooring 2.0mm thick. (3.03.11)
1
-
-
Providing and laying 3mm epoxy resin based jointless antistatic flooring/skirting consisting of specially formulated epoxy resin of required shade/colour applied in three layers (Minimum thickness 2 mm) in order to ensure a permanent connection for the elimination of static electricity between the supporting base and the surface including scratch resistant coating, base screed of epoxy mortar as per requirement complete as per manufacture's specifications & as directed. (work to be got executed through a specialised agency) on vitrified tile flooring and skirting. (3.04)
1
-
-
Providing & fixing PVC wall panelling of approved make & brand having 5mm thick hollow panels, including supply of necessary profile, steel screws, labour, T&P complete as per instruction of engineer incharge & site requirements. (3.05)
1
-
-
Patch repair of tiled terracing (mud phuska / lime terraching ) by filling cracks and crevices by cement and water proofing compound slurry injection, relaying loose tiles in 1:3 cement mortar, correcting slope by laying cement plaster in 1:4 cement and coarse sand mortar mixed with water proofing compound, including cleaning the area by wire bush to remove all loose materials, dirt etc. cost of all labour, materials, T & P and scaffolding etc. complete as directed by Engr I/C. (3.06)
1
-
-
Same as above but for gola at parapets, including sealing & grouting of rain water pipe opening. (3.07)
1
-
-
Patch repair of terracing by filling up cracks, crevice and undulations with bitumenous mastic and painting bitumen ( 80/100 ) over the entire treated area @ 1.7kg/sq.m impregnated with coarse sand @ 60dm3/10sqm including cleaning the surface with wire brush to remove all the dirt and loose material and with cloth soaked in kerosene complete as directed by Engr I/C. (3.08)
1
-
-
Removal of old and degenerated plaster from vertical wall, cleaning the brick surface thoroughly with wire brush to remove loose particles and throwing away the rubble, debris as per clause of terms and conditions including all material, labour, T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (3.09)
1
-
-
Dismantling cement concrete or brick or mosaic or kota/marble or glazed/ceramic tile floors/skirting/dado, including disposal of dismentled materials as directed by the engineer in-charge. (3.10)
1
-
-
Dismantling of brick work / R.C.C. cinder / cement / lime concrete including disposal of dismentled materials as directed by the engineer In-charge. (3.11)
1
-
-
Dismenteling lime terracing or mud phuska terracing, scrapping and removing all loose and broken materials, bitumen painted on roof, cleaning and disposal of all debris, complete as directed by engineer-In-charge. (3.12)
1
-
-
R.C.C. work with cement approved coarse sand, and 2 cm. (3/4”) gauge approved stone ballast in the proportion 1:1.5:3 (1cement: 4.5 aggregate) in lintels, slabs, beams and shelves etc. excluding supply of reinforcement and including necessary centering and shuttering etc. also including of all materials, labour, tools and plants etc. required for proper completion of the work as per direction of the engineer in-charge. (3.13)
1
-
-
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not including in an over all rates) wrought to required shape as necessary including bending for proper completion of the work as including supply of steel its wastage bend hooks and authorized over lapping shall be measured up to floor two level, including supply of all materials, labour, tools and plants etc. required for proper completion of the work as per direction of the engineer in-charge upto 16mm. tor. (3.14)
1
-
-
40 mm thick water proofing treatment for bottom of sunken portion 15 mm cement plaster in C:M 1:3 (1 cement: 3 coarse sand) mixed with approved water proofing compound as recommended by the manufacturer and finished with a floating coat of neat cement, over 25mm cement concrete flooring 1:2:4 (1cement: 2 c. sand:4 stone aggregate of size 12.5 mm and below ) mixed with approved water proofing compound, as recommended by the manufacturer with all material, labour, curring, T & P etc. required for proper comletion of the work, complete as directed by the engineer In-charge. (3.15)
1
-
-
20 mm cement plaster in two coats in sunken portion vertical walls mixed with water proof compound as recommended by the manufacturer and a coat of neat cement complete with all material, labour, curring, T & P etc. required for proper completion of the work, in ratio 1:3 ( 1 cement: 3 C. sand ) complete as directed by the engineer In-charge. (3.16)
1
-
-
Three coat membrane treatment with fibremesh applications of three layer modified polymer cementitious membrane treatment with CICO tapecrete P 151. The membrane treatment will also carry a layer of fibremesh to provide reinforcement. The third layer topping will be mixed with coarse sand. The said treatment shall be applied over existing terrace and sunk portion or other places where same treatment is required after surface preperation i.e. cleaning, brooming etc. with polymer mixed cement slurry including cost of material, labour, tools and plants etc. as required for proper completion of the work as per direction of Engineer Incharge. (3.17)
1
-
-
Two coat of membrane treatment. Application of three layer modified polymer cementitious membrane treatment with CICO tapecrete P 151 on vertical walls. The said treatment will involve surface preparations with wire brush followed by cleaning with soft brush. First coat of Tapecrete is then applied on the clean surface followed by pointing the brick joints with CICO no. 3 mixed mortar. After this the 2nd coat tapecrete is applied including all material, labour, T&P etc. complete as directed by Engineer Incharge at all levels. (3.18)
1
-
-
20 mm thick plaster with plasticizer. 20 mm thick plaster with cement mortar in the ratio of 1:4 cement and sand along with latex based capillary action resistant CICO plasticizer (ACRYL) including all material, labour, T&P etc. complete as required for proper completion of the work as per direction of Engineer Incharge. (3.19)
1
-
-
Application of two coats clear. Acrylic resin based water repellant (CICO Sealocote) coating of exterior exposed surface buildings. The application shall be made after removal all wax, grease, oil and dust by scrubbing with suitable solvent followed by scrubbing by mild detergent. All the exposed cracks shall be repaired by water proof cement including cost of all material, labour, T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (3.20)
1
-
-
Spraying cement grout by technically or by brushes on pointed brick walls of ducts etc. to fill up the surface points on the entire surface with cement slurry including all material, labour, tools and plants, scaffolding at all leyels up to height 10 mtrs. Including all material, labour, tools and plants scaffolding at all level up to height 10mtr. Including all material, labour T&P etc. required for proper completion of the sort as per direction of the engineer in-charge. (3.21)
1
-
-
Removing damaged and Providing and Laying cement concrete with 4 cm gauge brick/ stone ballast, coarse sand and cement in foundation and under floors in the proportion 1:4:8 including supply of all materials, labour tools and plants etc. required for proper completion of the work including including supply of all material, labour and T & P etc. as required for proper completion of the work as per direction of the Engineer I/c. (3.22)
1
-
-
SUB-SECTION D : WHITE WASHING & PAINTING WORK (Item Sl. No. 4.01 to 4.15)
-
-
-
Removing of old whitewash, paint or distemper thoroughly by scrapers, wirebrush sand paper etc. (measurement must be taken before applying new whitewash of paint) (4.01)
1
-
-
Applying one or more coats of whitewashing to give an even finish on old surface with moonj brush. [5 Lts. Water with 1 kg lime, 3 kg indigo (neel) and 40 gm gum. ] The rate includes all materials, labour, scaffolding, ladders, T&P and cleaning of loose whitewash, mortar, scales etc. with sand paper and cleaning of all surrounding surfaces, floors, doors, window, glass etc. spoiled due to white washing works at all levels. (4.02)
1
-
-
Providing & applying one or more coats to give an even finish of approved quality and shade (white, yellow, red, rose, etc.) french polish on old wooden surface i.e. door, window & C. B. shutters, frames, palmets, wall paneling, false ceiling, etc. including all labour, materials, scaffolding, tools, putty if required etc. at all levels as directed by Engineer Incharge. (4.03)
1
-
-
Providing and applying plaster of paris putty of 3mm thickness (average) over plastered surface to prepare the surface even and smooth complete. (4.04)
1
-
-
Providing & applying one or more coats to give an even finish of plastic emulsion paint of approved make and shade on old surface including cleaning with sand paper to remove loose paint, mortar, scales etc. and making surface even with putty, if required complete as directed by Er. I/c. (4.05.1)
1
-
-
Same as above item 4.05.1 but two or more coats and with one coat of primer & necessary surface preparation with Birla putty/POP as per site rquirement to give smooth & wave less surface before application of priming coat. (4.05.2)
1
-
-
Applying one or more coats of ready made dry distemper of approved make and shade on old surface to give an even finish including cleaning with sand paper to remove loose paint, mortar, scales etc, scaffolding, labour, materials, etc. complete as directed at all levels by Er. I/c. (4.06.1)
1
-
-
Same as above item no. 4.06.1 but two or more coats and with one coat of primer and surface preparation. (4.06.2)
1
-
-
Providing and applying cement wash with ordinary port land cement in approved shade, one coat to give an even finish. (4.07)
1
-
-
Applying one or more coat of Aluminium / Silver paint of approved make, quality and shade to give an even finish on old surface including cleaning of surface with sand paper to remove loose paint, mortar, scales etc. matching damaged surface with putty if necessary, scaffolding, labour, materials, T&P etc. as directed by Er. Incharge at all levels. (4.08)
1
-
-
Providing & applying heritage/Texture paint i.e scraping, cleaning surface with sand paper to remove loose paint, mortar, scales, Scaffolding and preparation of surface etc. supply of all material, labour & T&P etc. for proper completion of work complete as directed by Engg. I/c at all levels. (4.09)
1
-
-
Providing and applying liquor polish two or more coat on wooden perquit floor of approved quality after grinding, cleaning sand papering etc. to given an even and smooth finish complete i.e. supply of all material labour and T&P etc for proper completion of work as per direction of Engg. I/c. (4.10)
1
-
-
Providing & applying silicon paint two or more coats over outer stone cladding surface to make the surface water proof including cleaning with sand paper/wirebruch to remove loose paint, mortar, scales etc. scaffolding, labour, materials T&P etc. complete as directed at all levels. (4.11)
1
-
-
Providing & applying with Efficorescent paint of approved brand including priming coat, cleaning with sand paper, to remove loose paint, mortar, scales and preparing the surface etc. scaffolding, labour materials T&P complete as directed by Engg. I/c. (4.12)
1
-
-
Extra for external painting/ plaster work at heights more then 20 Mtr. Above plinth/ grade level requiring special scaffolding with staging for work such as overhead tanks large projections atriums lift/ stairs walls exteriors etc. (except chajja weather sheds, cills, canopy, ducts etc.). (4.13)
1
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacutrer's specifications including appropriate priming coat, preparationof surface., etc. complete. (4.14)
1
-
-
Applying one or more coat of enamel paint of approved make, quality and shade to give an even finish on old surface on all members of shade provided for disatribution box (electrical) including cleaning of surface with sand paper to remove loose paint, mortar, scales etc. matching damaged surface with putty if necessary, scaffolding, labour, materials, T&P etc. as directed by Er. Incharge at all levels. (4.15)
1
-
-
SUB SECTION E : WATER SUPPLY (Item Sl. No. 5.01 to 5.24.9)
-
-
-
Labour charges for removing open/ concerned/ underground G.I./ CPVC pipe lines up to 50 mm dia n.b. including stacking the pipe line and fittings in store, excavation refilling and compacting the trenches with axcavated earth, complete as directed by Engineer Incharge. (5.01)
1
-
-
Same as above as per item 5.01 but for pipe 65 mm to 150 mm dia n.b. (5.02)
1
-
-
Providing and laying open/ concealed/ underground water line of Jindal, Surya or equivalent ‘B’ class GI pipe for new or for replacement of pipe removed as per item 5.01 to 5.05, main and distribution lines to the building and for gradening etc. of below mentioned internal diameters, including cutting & making good wall, plaster, floor etc, including painting on pipes before concealing all necessary specials and joining to existing system, complete as directed by enginner -in- charge for 150mm dia of pipes. (5.03)
1
-
-
Same as above but for 100mm. (5.03.1)
1
-
-
Same as above but for 80mm. (5.03.2)
1
-
-
Same as above but for 65mm. (5.03.3)
1
-
-
Same as above but for 50 mm. (5.03.4)
1
-
-
Same as above but for 40 mm. (5.03.5)
1
-
-
Same as above but for 32 mm. (5.03.6)
1
-
-
Same as above but for 25 mm. (5.03.7)
1
-
-
Same as above but for 20 mm. (5.03.8)
1
-
-
Same as above but for 15 mm. (5.03.9)
1
-
-
Providing and laying open/ concealed/ underground CPVC water pipeline having thermal stability for hot and cold water supply including all CPVC plan for new or for replacement of pipe removed as per item 5.01 to 5.05, main and distribution lines to the building and for gradening etc. of below mentioned internal diameters, including cutting & making good wall, plaster, floor etc, including painting on pipes before concealing all necessary specials and joining to existing system, complete as directed by enginner -in- charge for 150mm dia of pipes. (5.04)
1
-
-
Same as above but for 100mm. (5.04.1)
1
-
-
Same as above but for 80mm. (5.04.2)
1
-
-
Same as above but for 65mm. (5.04.3)
1
-
-
Same as above but for 50 mm. (5.04.4)
1
-
-
Same as above but for 40 mm. (5.04.5)
1
-
-
Same as above but for 32 mm. (5.04.6)
1
-
-
Same as above but for 25 mm. (5.04.7)
1
-
-
Same as above but for 20 mm. (5.04.8)
1
-
-
Same as above but for 15 mm. (5.04.9)
1
-
-
Removing damaged spindle & providing & fixing new spindle & washer ( as per original make ) for bibcock. Angle valve, stopcock, concealed stopcock, hot and cold mixture etc. as directed by Engineer Incharge. (5.05)
1
-
-
Removing damaged C.P. knob & providing & fixing new C.P. knob ( as per original make ) for bibcock, angle valve, stopcock, concealed stop cock, hot and cold mixture etc. as directed by Engineer Incharge. (5.06)
1
-
-
Labour charge for removing pipe fitting (bends tees, elbows, unions Brass ball valve etc.), sluice valve, wheel valve, stopcock, Bib cocks, Pillar cocks, consealed stop cocks, Angle Valves, Shower (with or without arm) flush cock, hot & cold mixture, waste coupling (of sink, wash basin sink & urinal ) bottle trap, flush cock etc. of up to 50 mm dia in open/ consealed lines, and stacking the same in store including cutting masonry, plaster, flooring etc. & making good the same, complete as directed by Engineer Incharge. (5.07)
1
-
-
Removing, replacing & refixing washer of bib cock, angle, valve, hot & cold mixture, stop cock, pillar cock etc. including cost of washer at all level as directed by Engineer Incharge. (5.08)
1
-
-
Providing and fixing heavy duty gun metal wheel valve of approved quality and ISI make (NMC, NMV) for lines of following internal diameters including necessary sealant gasket special complete as directed by engineer in-charge for 50 mm dia. (5.09)
1
-
-
Same as above for 40 mm dia. (5.09.1)
1
-
-
Same as above for 32 mm dia. (5.09.2)
1
-
-
Same as above for 25 mm dia. (5.09.3)
1
-
-
Same as above for 20 mm dia. (5.09.4)
1
-
-
Same as above for 15 mm dia. (5.09.5)
1
-
-
Providing and fixing New GI pipe fitting ISI make in open or concealed or underground lines like socket coupling, tee, elbow, nipple and reducer etc. in existing pipe lines for replacement of fitting removed complete as directed by Engineer Incharge for 15 mm dia line. (5.10)
1
-
-
Same as above but for 20 mm dia line. (5.10.1)
1
-
-
Same as above but for 25 mm dia line. (5.10.2)
1
-
-
Same as above but for 32 mm dia line. (5.10.3)
1
-
-
Same as above but for 40 mm dia line. (5.10.4)
1
-
-
Same as above but for 50 mm dia line. (5.10.5)
1
-
-
Same as above but for 65 mm dia line. (5.10.6)
1
-
-
Same as above but for 80 mm dia line. (5.10.7)
1
-
-
Same as above but for 100 mm dia line. (5.10.8)
1
-
-
Same as above but for 150 mm dia line. (5.10.9)
1
-
-
Same as item 5.10 but for G.I. Union 15 mm dia line. (5.11)
1
-
-
Same as above but for 20 mm dia line. (5.11.1)
1
-
-
Same as above but for 25 mm dia line. (5.11.2)
1
-
-
Same as above but for 32 mm dia line. (5.11.3)
1
-
-
Same as above but for 40 mm dia line. (5.11.4)
1
-
-
Same as above but for 50 mm dia line. (5.11.5)
1
-
-
Same as above but for 65mm dia line. (5.11.6)
1
-
-
Same as above but for 80 mm dia line. (5.11.7)
1
-
-
Same as above but for 100 mm dia line. (5.11.8)
1
-
-
Same as above but for 150 mm dia line. (5.11.9)
1
-
-
Providing and fixing new CPVC plan and brass threaded of all type of fittings in open or concealed or underground lines like socket coupling, tee, elbow, nipple and reducer etc. in existing pipe lines for replacement of fitting removed complete as directed by Engineer Incharge for 15 mm dia line. (5.12)
1
-
-
Same as above but for 20 mm dia line. (5.12.1)
1
-
-
Same as above but for2 5 mm dia line. (5.12.2)
1
-
-
Same as above but for 32 mm dia line. (5.12.3)
1
-
-
Same as above but for 40 mm dia line. (5.12.4)
1
-
-
Same as above but for 50 mm dia line. (5.12.5)
1
-
-
Same as above but for 65 mm dia line. (5.12.6)
1
-
-
Same as above but for 80 mm dia line. (5.12.7)
1
-
-
Same as above but for 100 mm dia line. (5.12.8)
1
-
-
Same as above but for 150 mm dia line. (5.12.9)
1
-
-
Providing and fixing of CPVC union of approved quality for 15 mm dia line. (5.13)
1
-
-
Same as above but for 20 mm dia line. (5.13.1)
1
-
-
Same as above but for 25 mm dia line. (5.13.2)
1
-
-
Same as above but for 32 mm dia line. (5.13.3)
1
-
-
Same as above but for 40 mm dia line. (5.13.4)
1
-
-
Same as above but for 50 mm dia line. (5.13.5)
1
-
-
Same as above but for 65mm dia line. (5.13.6)
1
-
-
Same as above but for 80 mm dia line. (5.13.7)
1
-
-
Same as above but for 100 mm dia line. (5.13.8)
1
-
-
Same as above but for 150 mm dia line. (5.13.9)
1
-
-
Labour charges for laying GI pipe line ( refixing of good removed pipes and fittings or supplied by owner, free of cost ) including consumables & making holes/zaries & finishing the same, the same excavation, back filling, materials etc. complete as directed by Engineer Incharge. (Up to 50 mm dia concealed in structure). (5.14)
1
-
-
Same as above but for GI pipe line Above 50 mm dia, up to 100 mm, open lines, clamped to structure. (5.15)
1
-
-
Providing and fixing new chromium plated brass Sanitary fixtures of approved quality and make (ARK, IRIS,Plumber, ESSCO , Excel or equivalent) with chromium plated disc including supply of all material, labour, T&P etc. as required for proper completion of the work as per direction of engineer in-charge for 32 mm dia Bottle Trap. (5.16)
1
-
-
Same as above but for 32mm dia Waste Coupling. (5.16.1)
1
-
-
Same as above but for 32 mm dia nominal bore Dome type Waste Coupling. (5.16.2)
1
-
-
Same as above but for 15mm dia nominal bore Pillar Cock (Half Turn type). (5.16.3)
1
-
-
Same as above but for 15mm dia nominal bore Push Cock. (5.16.4)
1
-
-
Same as above but for 15mm dia nominal bore Short Body bib Cock. (Half turn type). (5.16.5)
1
-
-
Same as above but for 15 mm dia nominal bore Long Body bib Cock. (Half turn type). (5.16.6)
1
-
-
Same as above but for 15mm dia nominal bore Elbow Action Bib cock. (5.16.7)
1
-
-
Same as above but for 15mm dia nominal bore Basin mixture / Sink Mixture (Single or double hole ) Half Turn type. (5.16.8)
1
-
-
Same as above but for 15mm dia nominal bore Wall mixture ( half turn type). (5.16.9)
1
-
-
Same as above but for 15mm dia nominal bore cosealed Stop cock (Half turn type). (5.16.10)
1
-
-
Same as above but for 15mm dia nominal bore, Angle Valve ( Half turn type). (5.16.11)
1
-
-
Same as above but for 15mm dia nominal bore telephonic shower with extension piece, hook & stand etc. complete. (5.16.12)
1
-
-
Same as above but for 20 mm dia, 450 mm. long Towel rail of approved qlty. & ISI marked. (5.16.13)
1
-
-
Same as above but for 20 mm dia, 600 mm. long Towel rail of approved qlty. & ISI marked. (5.16.14)
1
-
-
Same as above but for 125 mm dia Towel ring of approved qlty. & ISI marked. (5.16.15)
1
-
-
Same as above but for 15mm dia nominal bore C.P. Shower complete with Shower Rose & Arm. (5.16.16)
1
-
-
Same as above but for 15mm dia nominal bore, Shower Rose only matching with existing. (5.16.17)
1
-
-
Same as above but for 15mm dia nominal bore, Shower Arm only matching with existing. (5.16.18)
1
-
-
Same as above but for 15 mm dia n.b.heavy duty brass bib cock / stop cock. (5.16.19)
1
-
-
Same as above but for but 20 mm dia n.b.heavy duty brass bib cock / stop cock. (5.16.20)
1
-
-
Same as above but for 15 mm dia n.b. heavy duty G.I. bib cock (ISI mark). (5.16.21)
1
-
-
Same as above but for 15 mm dia n.b. heavy duty PVC bib cock of Prayag make. (5.16.22)
1
-
-
Same as above but for C.P. abulation jet in EWC. (5.16.23)
1
-
-
Same as above but for C.P. Telephonic shower type jet in EWC. (5.16.24)
1
-
-
Same as above but for C.P. Brass flush valve. (5.16.25)
1
-
-
Same as above but for 15 mm n.b two way bid cock. (5.16.26)
1
-
-
Same as above but for 15mm n.b auto push cock. (5.16.27)
1
-
-
Cleaning, washing and disinfecting tanks of different capacity detailed below as per detailed specification and also including painting / stenciling the date of last cleaning on tanks using enamel paint including supply of all materials, labour and T & P etc. complete for proper completion of the job as per direction of engineer in-charge (Note: The tanks if required shall be disconnected cleaned, and refixed in original position including replacement of old G.I. fitting as and where required. The rates should include all these exingencies and no seperate payment shall be considered) Up to 500 Liters PVC overhead tanks. (5.17)
1
-
-
More than 500 Liters PVC overhead tanks. (5.17.1)
1
-
-
RCC Overhead water reservoirs. (5.17.2)
1
-
-
RCC Underground water reservior. (5.17.3)
1
-
-
Providing and fixing tank covers including all accessories as per specifications for 450x600 mm C.I./MS light duty or as per site condition. (5.18)
1
-
-
Same as above but for 600mm dia C.I. /MS medium duty/as per site condition. (5.18.1)
1
-
-
Same as above but for Stainless Steel Cover of ISI make. 600 mm dia. (5.18.2)
1
-
-
Same as above but for Sintex or approved similar brand HDPE covers for thanks up to 500 L. size. (5.18.3)
1
-
-
Same as above but for 501 to 1000 L. size. (5.18.4)
1
-
-
Same as above but for 1001 L. to 5001 ltr. Size. (5.18.5)
1
-
-
Providing and fixing locking arrangement with Nuts & Bolts, flat clamps, G.I. Sheet clamps with hinges etc. on tank covers as per specifications and as per requirement of site. (5.19)
1
-
-
Providing and fixing heavy brass ball cock of ISI make with PVC float completed as directed by Engineer Incharge. For 40 mm dia. (5.20)
1
-
-
Same as above but for 32 mm dia. (5.20.1)
1
-
-
Same as above but for 25 mm dia. (5.20.2)
1
-
-
Same as above but for 20 mm dia. (5.20.3)
1
-
-
Same as above but for 15 mm dia. (5.20.4)
1
-
-
Providing and fixing locks 50 mm pad locks of ISI, on exiting locking arrangements, where necessary. (5.21)
1
-
-
Providing and fixing new Sintex tank by removing the old damaged Sintex tanks and depositing the same to the stores including supply of all materials, labour and T & P etc. required for proper completion of the work as per direction of engineer in-charge. (5.22)
1
-
-
Providing & fixing PVC ball on existing ball cock i.e. supply of all material, labour, tools & plants as required, complete as directed by Engineer Incharge for 15mm to 25mm dia. (5.23)
1
-
-
Same as above but for 32mm to 50mm dia. (5.23.1)
1
-
-
Providing and fixing CPVC ball volve (Stop cock) of approved quality for 15 mm dia. (5.24)
1
-
-
Same as above but for 20 mm dia. (5.24.1)
1
-
-
Same as above but for 25 mm dia. (5.24.2)
1
-
-
Same as above but for 32 mm dia. (5.24.3)
1
-
-
Same as above but for 40 mm dia. (5.24.4)
1
-
-
Same as above but for 50 mm dia. (5.24.5)
1
-
-
Same as above but for 65 mm dia. (5.24.6)
1
-
-
Same as above but for 80 mm dia. (5.24.7)
1
-
-
Same as above but for 100 mm dia. (5.24.8)
1
-
-
Same as above but for 150 mm dia. (5.24.9)
1
-
-
SUB SECTION F : SEWERAGE & SANITARY WORK (Item Sl. No. 6.01 to 6.32)
-
-
-
Labour charges for removing and stacking in store underground stoneware RCC pipe line 100 mm to 300 mm. dia pipe including excavation, refilling of trenches, compacting, filled earth in layers, watering, ramming etc. complete as directed by Engineer Incharge. (6.01)
1
-
-
Extra over and above item 6.01 for re-fixing in cement joints including all labour, materials T & P complete as directed. (6.01.1)
1
-
-
Labour charges for removing and stacking in store CI waste water/ stoneware/CI rainwater/C.I soil pipe line up to 150 mm dia, concealed in structure, including closing holes making good the structure and finishing the surface with cement mortar as directed by engineer I/c at all levels. (6.02)
1
-
-
Extra over & above item 6.02 for re-fixing in cement joints including all labour, materials T & P complete as directed by Engineer Incharge. (6.02.1)
1
-
-
Same as above as per item no. 6.02 but for open lines. (6.03)
1
-
-
Extra over & above item 6.03 for re-fixing in cement joints including all labour, materials T & P complete as directed by Engineer Incharge. (6.03.1)
1
-
-
Labour charge for removing open sanitary fixtures viz glazed washbasin/urinal/kitchen sink/Anglo Indian W.C/European W.C etc. and stacking in store as directed by Er. I/c (All types and size at all levels). (6.04)
1
-
-
Extra over & above item 6.04 for re-fixing in cement joints including all labour, materials T& P complete as directed by Engineer Incharge. (6.04.1)
1
-
-
Same as above as per item no. 6.04 but for orissa pan and Indian W.C. pan as per instruction of engineer I/c including dismantling, removal of debris and cleaning the site complete as directed. (6.05)
1
-
-
Extra over & above item 6.05 for re-fixing in cement joints including all labour, materials T & P complete as directed by Engineer Incharge. (6.05.1)
1
-
-
Removing damaged fittings and providing and fixing new fittings of same make and size or approved quality/ make as directed including stacking damaged material in store etc. complete. Brass chromium plated urinal spreader. (6.06)
1
-
-
C.P. brass pipe up to 12mm dia for urinal spreader/washbasin connection etc. including check nuts for joints or jointing with soldering at site complete as directed by Engineer Incharge. (6.06.1)
1
-
-
Same as above but for PVC connection for washbasin/urinal/flush tank etc. (6.06.2)
1
-
-
Same as above but for PVC waste pipe 32mm dia for urinal/wash basin/ sink. (6.06.3)
1
-
-
Same as above but for C.P. brass/ SS perforated jali for N.T. 100 mm dia. (6.06.4)
1
-
-
Same as above but for PVC ball cock complete of 15mm dia. (6.06.5)
1
-
-
Same as above but for PVC seat cover with auto drop mechanism for European W.C. of approved make to match the existing colour / shape. (6.06.6)
1
-
-
Removing broken or damaged items/ spares from the structures /fixtures and stacking it in store and providing & fixing new as per original item including finishing the floor/wall as directed by Engineer Incharge. All items should be of make same as original unless approved otherwise for PVC Low Level flushing Cistern complete. (6.07)
1
-
-
Same as above but for White vitreous china low level flushing cistern 10 Ltr. Capacity of Parryware /Cera /Jaquar /Hindware or equivalent make with cover, side inlet and side overflow, PVC syphone, valve less fittings, C.P. flush bend etc. complete as directed by Er. I/c. (6.07.1)
1
-
-
Same as above but for item no.6.07.1 but 10 L capacity, suitable for parry ware ‘CASCADE’ MODEL. (6.07.2)
1
-
-
Same as above only white vitreous china/PVC cover for all type low level flushing cistern. (6.07.3)
1
-
-
Same as above only PVC syphone for all Low Level Cistern. (6.07.4)
1
-
-
Same as above onlyrubber washer set for L.L. cistern. (6.07.5)
1
-
-
Same as above only PVC/C.P. handle for L.L. cistern. (6.07.6)
1
-
-
Same as above only CP flush bend for Low Level Cistern. (6.07.7)
1
-
-
Same as above only PVC flush pipe 32mm dia only for high level cistern. (6.07.8)
1
-
-
Providing & fixing CI / M.S.brackets for flushing cistern/ wash basin, sinks etc. all types. (6.07.9)
1
-
-
Providing and fixing approved white marble with m/c cut edges for repairing existing sinks & water troughs including fixing with araldite, polishing, rounding edges, cleaning etc. complete as directed by Engineer Incharge. (6.08)
1
-
-
Providing and fixing new sanitary wares (Parryware/ Cera/ Jaquar/ Hindware or equivalent) of approved make for replacement of damaged item. (cost of removing to be paid as per item no. 6.04 or 6.05 as applicable) and connect the same to the existing pipe lines, including relaying the flooring sub base to original shape including supply of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge for white glazed vitreous china orissa pan w.c. size 580mm. (6.09)
1
-
-
Same as above but for Hindustan pattern white glazed vitreous china w.c. squatting pan of size 580mm with a pair of foot rests & etc. complete. (6.09.1)
1
-
-
Same as above item no. 6.09 but for Large flat back white glazed lipped urinal. (6.09.2)
1
-
-
Same as above item no. 6.09 but for Small flat back white glazed lipped urinal. (6.09.3)
1
-
-
Same as above item no. 6.09 but for White glazed wash basin 550mm x 400mm size or round shape. (6.09.4)
1
-
-
Supply & fixing Stainless steel kitchen sink size 610x460x230mm. of approved good quality including supply of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (6.09.5)
1
-
-
Same as above but for size 610x460x255mm. (6.09.6)
1
-
-
Same as above but with drain board 1030 x 460x 230 mm. (6.09.7)
1
-
-
Supply & fixing European type single syphonic white glazed china clay w. c. (pan only) suitable for coupled type flushing systems or high level flushing system. The rates includes cutting and making good the walls and floors including supply of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (6.09.8)
1
-
-
Same as 6.09.8 but parry ware ‘cascade’ model. (6.09.9)
1
-
-
Same as 6.09.8 but Universal / Anglo Indian type W.C.pan. (6.09.10)
1
-
-
Same as above but for Hindustan pattern white glazed vitreous china W.C.squatting pan of size 450mm a pair of foot rests & etc. complete. (6.09.11)
1
-
-
Supply & fixing Rural / PRA pattern white glazed vitreous china W.C. squatting pan of size 450mm, a pair of foot rests etc. complete as directed by the Engineer Incharge. (6.09.12)
1
-
-
Providing & fixing Syphon assembly for L.L. Cistern “Cascade model. (6.09.13)
1
-
-
Extra for coloured wash Basin/ cistern/ EWC/ orissa pan/ Urinal/ partitions/ pedastal. (6.09.14)
1
-
-
same as item No. 6.09.03 but for floor Urinal for Ladies. (6.09.15)
1
-
-
servicing & repairing of existing sensors attached with Urinals/ wash Basins. (6.09.16)
1
-
-
Providing and fixing new censor system for urinal/ wash basin same as existing. (6.09.17)
1
-
-
Providing and laying stoneware pipe of approved quality including all necessary fitting, excavation of trenches up to required depth, laying & jointing the pipes in line and level, with C.M. (1:1) and jute fibers, curing, refilling of the trenches, testing etc. complete as directed including supply of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge for 100 mm dia pipe. (6.10)
1
-
-
Same as above but for 150 mm dia pipe. (6.10.1)
1
-
-
Same as above but for 200 mm dia pipe. (6.10.2)
1
-
-
Same as above but for 250 mm dia pipe. (6.10.3)
1
-
-
Providing and laying Sand Cast Iron pipe (NECO, HEP OR Equivalent make) line concealed in the structure as per details and requirement including all necessary specials such as Y-s, T-s, offsets, plugs, bends etc. making zaris, fixing of pipes, filling and finishing zaris, cement filling of joints etc. complete as directed by engineer –in-charge for 75 mm dia pipe. (6.11)
1
-
-
Same as above but for 100 mm dia pipe. (6.11.1)
1
-
-
Same as above but for 150 mm dia pipe. (6.11.2)
1
-
-
Providing and laying Sand Cast Iron pipe(NECO, HEP OR Equivalent make) line open as per layout details and requirement including all necessary clamps, bolts, washers, gaskets, making holes & finishing the same, cement filling of joints and 2 coats of approved paints etc. complete as directed by engineer-in-charge for 75 mm dia pipe. (6.12)
1
-
-
Same as above but for 100 mm dia pipe. (6.12.1)
1
-
-
Same as above but for 150 mm dia pipe. (6.12.2)
1
-
-
Providing and laying CPVC pipeline of approve quality concealed in the structure as per details and requirement including all necessary specials such as Y-s, T-s, offsets, plugs, bends etc. making zaris, fixing of pipes, filling and finishing zaris, cement filling of joints etc. complete as directed by engineer –in-charge for 75 mm dia pipe. (6.13)
1
-
-
Same as above but for 100 mm dia pipe. (6.13.1)
1
-
-
Same as above but for 150 mm dia pipe. (6.13.2)
1
-
-
Providing and laying CPVC pipeline of approve quality open as per layout details and requirement including all necessary clamps, bolts, washers, gaskets, making holes & finishing the same, cement filling of joints and 2 coats of approved paints etc. complete as directed by engineer-in-charge for 75 mm dia pipe. (6.14)
1
-
-
Same as above but for 100 mm dia pipe. (6.14.1)
1
-
-
Same as above but for 150 mm dia pipe. (6.14.2)
1
-
-
Providing and fixing approved quality vitreous glazed partition for flat back lipped urinals, including cutting and making good the walls etc. complete as directed by engineer-in-charge. (6.15)
1
-
-
Providing and laying white glazed viterous 100 mm half round block channel with dead end or drain hole piece including fixing channel on 1:5:10 BBCC base with cement mortar 1:4 and jointing with white cement etc. complete as directed by engineer-in-charge. (6.16)
1
-
-
Providing and fixing HCI Nahani, P, S trap or T bend (NECO, HEP OR Equivalent make) of approved make with perforated CI jail if required including cutting the floor and fixing trap in CC 1:2:4, making good the floor etc. complete as directed by engineer-in-charge. (6.17)
1
-
-
Providing and fixing white chinaware paper holder of approved quality and make with aluminum roller, paper roll etc. complete as directed by engineer I/c. (6.18)
1
-
-
Same as above but brass chromium plated with roller of approved quality and make. (6.19)
1
-
-
Providing and fixing liquid soap bottle of approved make and quality etc. complete as directed by Er. I/c. (6.2)
1
-
-
Providing and fixing CP Brass soap dish of approved make and quality of size 150x 150mm including cutting wall, fixing soap dish and finishing wall as per surroundings etc. complete as directed by engineer I/c. (6.21)
1
-
-
Providing and fixing approved brand first class mirror in PVC frame size 600 x 450 mm complete as directed. (6.22)
1
-
-
Providing & fixing CI gully traps covers, 300x300mm. size with frame over existing gully traps, removing old frame & grouting the new frame & finishing the surface with PCC 1:3:6 finished smooth weight of cover 6 kg and weight of frame 2 kg. (6.23)
1
-
-
Providing and fixing CI gully trap cover size 300 x 300 mm weighting 6 kg, over existing frame. (6.24)
1
-
-
Repairing of leaky joints of C.I. pipes at all levels for rain water, waste water & soil lines by removing completely old cement or lead jointing, cleaning and remaking joints leak proof, including all labour, material, T & P, scaffolding etc. complete as directed including supply of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge for 75 mm dia pipe. (6.25)
1
-
-
Same as above but for 100 mm dia pipe. (6.25.1)
1
-
-
Same as above but for 150 mm dia pipe. (6.25.2)
1
-
-
Repairs for stopping leakage from floor traps, NT etc. fixed in floor by cleaning & clearing the traps and adjoining area, drying the same and filling and sealing crevices around the trap and inside the trap up to & including the joints accesible, by M. seal or other approved epoxy sealants. (6.26)
1
-
-
Removing the old pipe and providing and fixing of new 100mm dia A.C. down pipes complete with rose heads, bends, shoe, tees, M.S. clamps ( 25 mm wide & 3 mm thick ) fixed to walls by 15 cm. Long 6 mm dia, nails and including repair of plaster pointing etc. including repair of kurras if necessary and disposal of the waste material including cast of all material, labour, tools and plants etc. complete as required for proper completion of the work as per direction of the engineer in-charge. (6.27)
1
-
-
Providing and fixing C.I. grating of size 100 mm X 100 mm or 100 mm dia including supply of all labour, material i.e. cement sand etc. and T&P as required for proper completion of the works as per direction of Engineer Incharge. (6.28)
1
-
-
Same as above but for C.I. grating of size 150X 150 mm or 150 mm dia. (6.28.1)
1
-
-
Providing & fixing C.P. brass waste coupling of “Nirali make” 125 mm. dia only to replace damaged couplings of existing steel sinks. Rate includes supply of all material, labour, T&P complete as directed by Engineer I/c. (6.29)
1
-
-
Providing & fixing following SCI fixtures of ISI make, rates includes supply of material, labour, T & P etc. complete as directed by Engineer I/c. (6.30)
-
-
-
Plain bend (90 degree turn) 150 mm dia. (6.30.1)
1
-
-
Same as above but for 100 mm. dia. (6.30.2)
1
-
-
Same as above but for 75 mm. dia. (6.30.3)
1
-
-
Plain bend (135 degree turn) 150 mm. dia. (6.30.4)
1
-
-
Same as above but for 100 mm. dia. (6.30.5)
1
-
-
Door Bend (90 degree turn) 150 mm. dia. (6.30.6)
1
-
-
Same as above but for 100 mm. dia. (6.30.7)
1
-
-
Same as above but for 75 mm. dia. (6.30.8)
1
-
-
Plain Tee 150x150x100 mm. size. (6.30.9)
1
-
-
Plain Tee 150x150x150 mm. size. (6.30.10)
1
-
-
Plain Tee 100x100x100 mm. size. (6.30.11)
1
-
-
Plain Tee 75x75 x75 mm. size. (6.30.12)
1
-
-
Plain Tee 100x100x75 mm. size. (6.30.13)
1
-
-
Door Tee 150x150x150 mm. size. (6.30.14)
1
-
-
Door Tee 150x150x100 mm. size. (6.30.15)
1
-
-
Door Tee 100x100x100 mm. size. (6.30.16)
1
-
-
Door Tee 100x100x75 mm. size. (6.30.17)
1
-
-
Door Tee 75 x75 x75 mm. size. (6.30.18)
1
-
-
Collor piece 150 mm. dia. (6.30.19)
1
-
-
Collor piece 100 mm. dia. (6.30.20)
1
-
-
Collor piece 75 mm. dia. (6.30.21)
1
-
-
Door piece 150 mm. dia. (6.30.22)
1
-
-
Door piece 100 mm. dia. (6.30.23)
1
-
-
Door piece 75 mm. dia. (6.30.24)
1
-
-
Cowl piece 150 mm. dia. (6.30.25)
1
-
-
Cowl piece 100 mm. dia. (6.30.26)
1
-
-
Cowl piece 75 mm. dia. (6.30.27)
1
-
-
Labour charges for removing and stacking in store underground stoneware / RCC pipe line 230 mm to 300 mm dia pipe including excavation, refilling of trenches, compacting filled earth in layers, watering, ramming etc. complete as directed by the Engineer Incharge. (6.31)
1
-
-
Extra over & above item no. 6.31 for refixing in cement joints including all labour materials, T&P etc. complete as directed by the Engineer Incharge. (6.31.1)
1
-
-
Pumping of sewage from manholes through 100 mm dia pipes by means of 10 HP diesel pumps as and when required including a lead pipe of 10 m. float on the suction side and about 15 m. pipe on the delivery side alongwith supply of all materials, T&P, labours, diesel, spares, pipe, lubricants etc. as required for proper pumping of the sewage from sewer lines as per direction of Engineer Incharge. (6.32)
1
-
-
SUB SECTION G : MISCELLENEOUS WORKS (Item Sl. No. 7.01 to 7.24.4)
-
-
-
Clearing of building terraces by brooming, chipping & cleaning debris to allow smooth flow of water, hosing & washing with adequate water to check for loose, cracked spots and adequate flow in rainwater pipes, clearing of rain water pipes & clearing blocked rain water pipes up to ground level, including all tools & plant, scaffolding etc. complete at directed. [(Measurment to be for plan area of terrace (inside dimension between parapets in plan only ) actually cleaned] (7.01)
1
-
-
Welding charges for welding broken/loose fixtures in building work using suitable electric arc welding plants, labour, consumables, T & P scaffolding etc. at all levels any where in the institute campus. (7.02)
1
-
-
Lettering with Enamel paint of approved brand & manufacture on wooden/steel or plastered surface including painting the background of enamel paint ( 2 coats ) & primer 1 coat. Including supply of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (7.03)
1
-
-
Same as above but lining for badminton, Tennis, volley ball courts etc. or similar work. (7.04)
1
-
-
Making opening for air conditioners / cooler etc. in windows of all type, cutting glass & M.S. grills etc. up to size 75 cm x 60 cm, making good the edges and providing sal wood batten as required, welding flat , painting, re-fixing glass in balance area, including supply of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (7.05)
1
-
-
Same as item above but cutting opening in brick walls fixing sal wood frame all around & making good plaster & paint in surrounding etc. Including supply of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (7.06)
1
-
-
Providing and Fixing MS member of all shape & sizes rolled section, Welded mesh section, plates etc. for repairs or renewal of existing gates, garrage gates, grills, fencings inserts supports etc. to desired level, shape & alignment, including cutting holes & finishing necessary wielding, bolting riveting and painting with one coat of approved red-oxide primer & two coats of approved synthetic enamel paint, disposal of rubbish, all materials, labour, T & P etc. complete as directed by Engineer Incharge. (7.07)
1
-
-
Providing & fixing welded mesh of required size and gauge including supply of all material ,labour and T&P COMPLETE as per direction of E/I. (7.08)
1
-
-
Cleaning & grinding existing mosaic tile/cast in situ mosaic /Kota / marble floor by grinding machine with fine grit block no. 320 to get even and smooth surface. Cleaning shall be done initially with detergent or soap and finally completed by oxalic acid spread at rate of 33 gm. / sq.m. and rubbed with numda black/felt block and dried with soft cloth & finished clean including new cost of all labour, materials, T&P etc. i/c polishing as required for proper completion of the work as per direction of engineer in-charge. (7.09)
1
-
-
Removing existing PVC wall paper / PVC flooring and cleaning of its back side to prepare for reuse, rates includes supply of all material, labour, T & P etc. complete as directed by Engineer I/c. (7.10)
1
-
-
Refixing of PVC wall paper/PVC flooring as removed above, rate includes supply of all material, labour, T & P, adhesive for fixing etc. complete as directed by Engineer I/c. (7.11)
1
-
-
Refixing of available marble/granite stone 20mm. thick in floor/dado/skirting etc. rate includes supply of all material, labour, cement, fine/coarse sand, pigment, adhesive T & P etc. to complete the work as directed by Engineer I/c. (7.12)
1
-
-
Removing of existing notice board/ view box/ Gyser/ Air curtain/ Water cooler etc. & to keep in store safely. Rate includes supply of all material, labour T & P etc. complete as required for proper completion of the work as per direction of engineer incharge. (7.13)
1
-
-
Same as above but for refixing of same. (7.13.1)
1
-
-
Providing & fixing Fancy end brackets 25 mm. dia for hanging of curtains including drilling, cutting, screws etc. also including supply of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (7.14)
1
-
-
Cartage/ disposal of ballast, Kankar, coal, Grit, debris, earth or sand etc. including loading and unloading but excluding staking on pucca roads, including supply of all material, labour, tools and plants etc. as required for the proper completion of work as per direction of Engineer Incharge Upto 5.0 Km. (7.15)
1
-
-
Providing and fixing new G.I. Barbed wire (2.24 mm dia 4 point 2.0 mm bards @75 mm C/C total weight not less than 9.38 Kg. Per 100 mtrs. ) with G.I. steples, tighting, fixing, cutting & removing excess length of old barbed wire, including cost of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (7.16)
1
-
-
Providing & fixing CP Brass 125 mm dia waste coupling to replace damaged coupling of existing steel sink including supply of all materials, labour, T&P etc. complete as per direction of Engineer-in-charge. (7.17)
1
-
-
Providing & fixing 32 mm dia PVC Flush bend for low level cistern including supply of all materials, labour, T&P etc. complete as per direction of Engineer-in-charge. (7.18)
1
-
-
Providing and fixing new "Prayaga" make PVC Pillar cock/Angle valve/Stop cock/ bib cock/ Push cock etc. including supply of all material, labour, T&P etc. as required for proper completion of the work as per direction of engineer in-charge. (7.19)
1
-
-
Providing & Fixing Sunfilm of approved make viz. Garware, M.teck, Lomar or equivalent standard 20 Micron thick over existing glass panes including cleaning of glass panes before fixing, fixing of Sunfilm & removal of scrap film if any including supply of all materials etc.complete as per direction of Engineer-in- charge. (7.20)
1
-
-
Providing & fixing of welded mesh of square/ rectangle shape made with minimum 3.0 mm dia MS wire including fixing it with MS Frame made of angle/flat also including all materials, labor, T&P etc. (excluding the supply of MS Flat/angle) complete as per direction of Engineer-in- charge. (30mm x 30mm or 25mm x 50mm). (7.21)
1
-
-
Providing & fixing 12 mm thick plywood sheet of ISI Mark of approoved brand including supply of all materials, labour & T&P etc.complete as per direction of Engineer-in- charge. (7.22)
1
-
-
Providing & fixing corrugated GI sheets of minimum 0.63 mm thick of TATA/JINDAL roofing and fixing bittern washer and ‘J’ hooks complete(excluding the cost of purlins, rafters and trusses) including cost of all materials, labour, & T&P etc. as required for proper completion of the work as per direction of Engg. I/c. (7.23)
1
-
-
Providing and fixing R.C.C manhole covers/M.S frame by removing the old damaged cover/ frame as the case may be of required shape and size at site including supply of all materials, labours and T&P etc. required for proper completion of the work as per direction of Engineer in charge. M.S frame for manhole cover 600 mm dia round/ M.S frame for manhole cover 600 mm x 600 mm square including its fixing with Mortar/R.C.C. (7.24)
1
-
-
Same as above but for 300 mm dia. Round/ M.S frame manhole cover 300 mm x 300 mm square. (7.24.1)
1
-
-
R.C.C Manhole cover 600 x 600 mm size dia. (7.24.2)
1
-
-
R.C.C Manhole cover 600 mm dia. (7.24.3)
1
-
-
R.C.C manhole cover 300 x 300 mm size/ 300 mm dia. (7.24.4)
1
-
-
SUB SECTION-H : (Renovation works item Sl.No. 8.01 To 8.80)
-
-
-
First class brick work with 1:4 Cement and course sand mortar in super structure including labour & material, T & P, curing etc., required for proper completion of work, complete in all respect, upto height, 10 meter including required, scaffolding & ladder etc. (8.01)
1
-
-
First class brick work with 1:4 Cement and course sand mortar in super structure including labour & material, T & P, curing etc., required for proper completion of work, complete in all respect, i/c charges of required scaffolding & ladder etc., height more than 10 meter. (8.02)
1
-
-
Cement plaster 12 mm thick with Cement & coarse sand in 1:4 including labour & material, T & P, curing etc., required for proper completion of work, complete in all respect upto height, 10 meter including required, scaffolding & ladder etc. (8.03)
1
-
-
Cement plaster 12 mm thick with Cement & coarse sand in 1:4 including labour & material, T & P, curing etc., required for proper completion of work, complete in all respect, i/c charges of required scaffolding & ladder etc., height more than 10 meter. (8.04)
1
-
-
Providing and laying cement concrete 1:1.5:3 (1 Cement : 1.5 Coarse sand : 3 Stone Grit 20mm gauge) including labour & material, T & P, curing etc., required for proper completion of work, complete in all respect. (For C.C. payment, road etc.) (8.05)
1
-
-
Providing & laying Granite stone (16-20 mm thick) on floor/wall with adhesive/cement mortar i/c dismantling of damaged stone, raking, cleaning & preparation of surface i/c grouting/filling with white cement & matching pigment including labour & material, T & P, wastage of material etc. Complete in all respect. (8.06)
1
-
-
Providing & laying border tiles approx. 6”W (equivalent to already laid) on floor/wall with adhesive/cement mortar i/c dismantling of damaged tile, raking, cleaning & preparation of surface i/c grouting/filling with white cement & matching pigment including labour & material, T & P, wastage of material etc. Complete in all respect. (8.07)
1
-
-
Providing & laying 10mm thick vitrified tiles (600x600 mm and above) on floor/wall (equivalent to already laid) with adhesive/cement mortar i/c hacking, raking, cleaning & preparation of surface i/c grouting/filling with white cement & matching pigment including labour & material, T&P, wastage of material etc. Complete in all respect. (8.08)
1
-
-
Providing & laying 10mm thick vitrified tiles skirting approx. 4”W (equivalent to already laid) with adhesive/cement mortar i/c skirting, raking, cleaning & preparation of surface i/c grouting/filling with white cement & matching pigment including labour & material, T & P, wastage of material etc. Complete in all respect. (8.09)
1
-
-
Providing & laying wall tiles on outer walls (equivalent to already laid) with adhesive/cement mortar i/c dismantling damaged tiles, raking, cleaning & preparation of surface i/c grouting/filling with white cement & matching pigment including labour & material, T & P, wastage of material etc. Complete in all respect. (8.10)
1
-
-
Providing & laying 20mm thick Parking/ pathway tiles (equivalent to already laid) with adhesive/ cement mortar i/c dismantling damaged tiles, raking, cleaning & preparation of surface i/c grouting/filling with white cement & matching pigment including labour & material, T & P, wastage of material etc. Complete in all respect. (8.11)
1
-
-
Providing & laying 10mm thick Ceramic tiles on floor/wall (equivalent to already laid) with adhesive/cement mortar i/c dismantling of damaged tile, raking, cleaning & preparation of surface i/c grouting/filling with white cement & matching pigment including labour & material, T & P, wastage of material etc. Complete in all respect. (8.12)
1
-
-
Proving & Laying 20mm thick Kota Stone with adhesive/cement mortar i/c hacking, raking, cleaning & preparation of surface i/c grouting/filling with white cement & matching pigment including labour & material, T & P, wastage of material etc. Complete in all respect. (8.13)
1
-
-
A- Proving & fixing of metallic false ceiling (at the place of damaged false ceiling) including labour, required hardware and material such as runner, T section, wall angle, ceiling section, fastener, sofit clip, suspension clip, hanger etc. i/c removal of old damaged false ceiling but excluding required new tiles. (Required additional new tiles will be provided by the institute.) (8.14)
1
-
-
B- Supply of metallic false ceiling tile, equivalent to existing (size approx. 2’x2’). (8.15)
1
-
-
C- Correction of little bend/deflected metallic false ceiling i/c labour, required hardware, hanger, suspension clip etc. Complete in all respect. (8.16)
1
-
-
A- Proving & fixing of M.F. false ceiling (at the place of damaged false ceiling) including labour, required hardware and material such as runner, T section, wall angle, ceiling section, fastener, sofit clip, suspension clip, hanger etc. i/c removal of old damaged false ceiling but excluding required new tiles. (Required additional new tiles will be provided by the institute.). (8.17)
1
-
-
B- Supply of M.F. false ceiling tile (Armstrong/ OR equivalent to existing) & (size approx. 2’x2’). (8.18)
1
-
-
C- Correction of little bend/deflected M.F. false ceiling i/c labour, required hardware, hanger, suspension clips etc. Complete in all respect. (8.19)
1
-
-
Proving & fixing of gypsum board false ceiling (at the place of damaged false ceiling) including labour, required hardware and material such as gypsum board, hangers, G.I. channels, jointing compound, jointing tapes, fastener etc. Complete in all respect. i/c removal of old damaged false ceiling. (8.20)
1
-
-
Supply & fiixing of anodized Aluminum partition 45x45 mm vertical and horizontal aluminum section including door section vertical 45x45 mm, top & bottom 80x45 mm, & middle 45x45 mm with 5mm thick plain glass /12mm thick both side pre-laminated board, including all necessary material, labour, T & P, hardware and aluminum fitting. Such as aluminum clip / bedding, rubber bedding, T- rubber, 200 mm long Aluminum Handle, 200mm long aluminum tower bolt, ISI mark sliver color door closer, aluminum door stopper, aluminum heavy quality 100mm long hinge & locking arrangement etc. including wastage of material, complete in all respect. (2/3mm thick aluminum shall be used and anodic coating of grade AC 15). (8.21)
1
-
-
Supply & fiixing of anodized Aluminum partition 45x45 mm vertical and horizontal aluminum section including sliding door section vertical 45x45 mm, top & bottom 80x45 mm, & middle 45x45 mm, including G channel with sliding runner, with 5mm thick plain glass /12mm thick both side pre-laminated board, including all necessary material, labour, T & P, hardware and aluminum fitting. Such as aluminum clip / bedding, rubber bedding, T- rubber, 200 mm long Aluminum Handle, 200mm long aluminum tower bolt, aluminum door stopper, aluminum heavy quality 100mm long hinge & locking arrangement etc. including wastage of material, complete in all respect. (2/3mm thick aluminum shall be used and anodic coating of grade AC 15). (8.22)
1
-
-
Supply & fiixing of anodized Aluminum partition 100x35 mm vertical and horizontal aluminum section including door section vertical 80x45 mm, top & bottom 80x45 mm, & middle 80x45 mm with 5mm thick plain glass /12mm thick both side pre-laminated board, including all necessary material, labour, T & P, hardware and aluminum fitting. Such as aluminum clip / bedding, rubber bedding, T- rubber, 200 mm long Aluminum Handle, 200mm long aluminum tower bolt, ISI mark sliver color door closer, aluminum door stopper, aluminum heavy quality 100mm long hinge & locking arrangement etc. including wastage of material, complete in all respect. (Thickness of aluminum section for door not less than 3mm and for window not less than 2mm and anodic coating of grade AC 15). (8.23)
1
-
-
Supply & fiixing of anodized Aluminum partition 100x35 mm vertical and horizontal aluminum section including sliding door section vertical 80x45 mm, top & bottom 80x45 mm, & middle 80x45 mm, including G channel with sliding runner, with 5mm thick plain glass /12mm thick both side pre-laminated board, including all necessary material, labour, T & P, hardware and aluminum fitting. Such as aluminum clip / bedding, rubber bedding, T- rubber, 200 mm long Aluminum Handle, 200mm long aluminum tower bolt, aluminum door stopper, aluminum heavy quality 100mm long hinge & locking arrangement etc. including wastage of material, complete in all respect. (Thickness of aluminum section for door not less than 3mm and for window not less than 2mm and anodic coating of grade AC 15). (8.24)
1
-
-
Supply & fixing of 5 mm thick float glasses (transparent / non transparent / opack), i/c labour & material, in already fixed aluminum door / window / partition etc. i/c rubber bidding, clips etc. complete in all respect. (8.25)
1
-
-
Supply & fixing of 5 mm thick float glasses (transparent / non transparent), i/c labour & material, in steel door/window/ventilator/partition i/c silicon, putty etc. i/c racking out the old putty if any, complete in all respect. (Building may be multistoried and window/ ventilator may be inside/ outside of the building). (8.26)
1
-
-
Supply & fixing of 5 mm thick float glasses (transparent / non transparent), i/c labour & material, in wooden door/window/ventilator/partition i/c bidding/putty etc. complete in all respect. (Building may be multistoried and window/ ventilator may be inside/ outside of the building). (8.27)
1
-
-
Supply & fixing of toughen glass 5 mm thick, in structural glazing work, i/c labour & material, i/c silicon, tape etc. complete in all respect i/c cleaning of base in old structural glazing work. (Building may be multistoried). (8.28)
1
-
-
Supply and fixing of hydraulic heavy duty Godrej make/ OR equivalent ISI Mark door closer, i/c labour & material, complete in all respect. (8.29)
1
-
-
Supply and fixing of floor spring machine heavy duty (make Amar/ Sandhu OR equivalent ISI Mark), i/c labour & material, after removal of damaged floor spring machine in already installed aluminum doors. Complete in all respect. (8.30)
1
-
-
Supply and fixing of pivet (ISI mark), i/c labour & material, after removal of damaged pivet in already installed aluminum. Complete in all respect. (8.31)
1
-
-
Supply and fixing of bar (ISI mark), i/c labour & material, after removal of damaged bar in already installed aluminum door. Complete in all respect. (8.32)
1
-
-
Supply & fiixing of overhead wall mounted storage cabinet (300 mm to 450 mm deep) with open-able shutter. Made out of 19 mm thick ISI Mark board, back side of storage covered with 12 mm thick ply, with 1 mm thick laminate on front, side, top & bottom as per approved color & shade, and All cut / exposed edges of board shall be sealed with teak wood leaping / beading, with duly finished melamine polish. The cabinet fixing as site requirement / condition with Esthetical look and finishing, including all necessary material, labour, T & P, hardware such as, lock handle, adhesive etc. complete in all respect. (8.33)
1
-
-
Supply & fiixing of overhead wall mounted storage cabinet (300 mm to 450 mm deep) without open-able shutter. Made out of 19 mm thick ISI Mark board, back side of storage covered with 12 mm thick ply, with 1 mm thick laminate on side, top & bottom as per approved color & shade, and All cut / exposed edges of board shall be sealed with teak wood leaping / beading, with duly finished melamine polish. The cabinet fixing as site requirement / condition with Esthetical look and finishing, including all necessary material, labour, T & P, hardware such as, lock handle, adhesive etc. complete in all respect. (8.34)
1
-
-
Supply & fiixing of floor mounted storage cabinet (450 mm to 600 mm deep) including 75 mm (H) heavy quality steel legs / skirting with open-able shutter. Made out of 19 mm thick ISI Mark board, back side of storage covered with 12 mm thick ply, with 1 mm thick laminate on front, side and top as per approved color & shade, and all cut / exposed edges of board shall be sealed with teak wood leaping / beading, with duly finished melamine polish. The cabinet fixing as site requirement / condition with Esthetical look and finishing, including all necessary material, labour, T & P, hardware such as, lock handle, adhesive etc. complete in all respect. (8.35)
1
-
-
Supply & fiixing of floor mounted storage cabinet with multiple drawer units (300 mm to 450 mm deep) including 75 mm (H) heavy quality steel legs / skirting with drawer bottom sliding channel. Made out of 19 mm thick ISI Mark board, back side of storage covered with 12 mm thick ply including 1 mm thick laminate on front, side and top as per approved color & shade, and all cut / exposed edges of board shall be sealed with teak wood leaping / beading. With duly finished melamine polish. The cabinet fixing as site requirement / condition with Esthetical look and finishing, including all necessary material, labour, T & P, hardware such as, lock handle, adhesive etc. complete in all respect. (8.36)
1
-
-
Supply & fiixing work station 450 to 700 mm (W) & 750 mm (H) including one side storage unit. The side storage unit have one drawer and shutter including PVC computer Keyboard sliding tray with 19 mm thick ISI Mark board having 1 mm thick laminate on top, vertical side support, storage unit side & front as per approved shade and color. The entire inner surface shall be painted with synthetic enamel paint. All cut / exposed edges of board shall be sealed with teak wood leaping / beading, with duly finished melamine polish. The cabinet fixing as site requirement / condition with Esthetical look and finishing, including all necessary material, hardware such as Wire Manager, bottom door sliding channel, lock handle, adhesive etc., labour, T & P complete in all respect. (8.37)
1
-
-
Supply and fixing of glass film including labour & material, T & P, wastage of film, complete in all respect. (8.38)
1
-
-
Supply and fixing of anodized Aluminum grill on aluminum window / partition with ‘Y’ & ‘H’ channel including, cutting, fixing, i/c labour & material, T & P, wastage of material, Complete in all respect. (8.39)
1
-
-
Supply and fixing of mild steel or iron work of small size and sections such as doors/ window/grill/railing etc., including labour, material, T & P and fixing at site by fastening/ grouting/welding etc. Complete in all respect. (8.40)
1
-
-
Supply and fixing of mild steel or iron work of heavy size such as trusses, gates and roof work etc., including labour, material, T & P and fixing at site by fastening/ grouting/ welding etc. Complete in all respect. (8.41)
1
-
-
Supply and Fixing of poly carbonate sheet (double layer) in required shape including all material, hardware, labour, T & P, complete in all respect. (8.42)
1
-
-
Supply and Fixing of fiber sheet (2mm) in required shape including all material, hardware, labour, T & P, complete in all respect. (8.43)
1
-
-
Painting of iron works / steel works such as gate, door, window, railing, grating, grills, truss etc. by superior quality of paint like Berger / Asian /OR Equivalent in two coats. Including all materials, labour and T & P required for proper completion of the work. (8.44)
1
-
-
Distempering with oil bound distemper two coat of make berger/nerolac/OR equivalent, on old work, including all materials, labour and T & P required for proper completion of the work, complete in all respect. (8.45)
1
-
-
Finishing wall with two coat of exterior paint of make berger/nerolac/OR equivalent, on old work, including all materials, labour and T & P required for proper completion of the work, complete in all respect. (8.46)
1
-
-
Providing & laying RCC 1:2:4 (1 Cement : 2 Coarse sand : 4 Stone Grit 20mm gauge) including all material, labor, T & P, cutting of MS bars, binding wires, centering & shuttering, curing etc. required for proper completion of work, complete in all respect. But excluding supply of reinforcement steel. (8.47)
1
-
-
Fixing of door/window frame, in old work, i/c dismantling of old frame, required labour. & material C.C., brick work, plaster etc. Complete in all respect but excluding supply of door/window frame. (8.48)
1
-
-
A- Supply & fixing of bottom chain i/c required labour & material in old repairable vertical blind. (8.49)
1
-
-
B- Supply & fixing of bottom weight i/c labour & material, in old repairable vertical blind. (8.50)
1
-
-
C- Supply & fixing of cord weight i/c labour & material, in old repairable vertical blind. (8.51)
1
-
-
D- Supply & fixing of tilter chain i/c labour & material, in old repairable vertical blind. (8.52)
1
-
-
E- Supply & fixing of cord i/c labour & material, in old repairable vertical blind. (8.53)
1
-
-
F- Supply & fixing of installation bracket i/c labour & material, in old repairable vertical blind. (8.54)
1
-
-
Supply & fixing of Orissa type WC (Indian seat) Pan size 580 mm of make Parriware/Cera/OR equivalent. I/C cutting & repairing/making good the floor, tiles etc. including all material (seat, tiles etc.), labour, T & P, etc. Complete in all respect. (8.55)
1
-
-
Supply & fixing of European type WC (commode seat) of make Parriware/Cera/OR equivalent. I/C cutting & repairing/making good the floor, tiles etc. including all material (seat, tiles etc.), labour, T & P, etc. Complete in all respect. (8.56)
1
-
-
Supply & fixing of Anglo Indian WC (dual purpose closet) of make Parriware/Cera/OR equivalent. I/C cutting & repairing/making good the floor, tiles etc. including all material (seat, tiles etc.), labour, T & P, etc. Complete in all respect. (8.57)
1
-
-
Supply & fixing of 10 lit. low level White PVC flushing cistern & flush pipe of make Parriware/Cera/OR equivalent. I/C cutting, repairing/ making good the wall, tiles etc. wherever required, i/c all material, labour, T & P, etc. Complete in all respect. (8.58)
1
-
-
Providing & fixing white vitrious china wash basin size 630x450mm of make parriware/cera/OR equivalent with CI brackets i/c labour, material, cutting and making good the wall, tiles etc. where ever required. Complete in all respect. (8.59)
1
-
-
Providing & fixing white vitrious china wash basin size 550x400mm of make parriware/cera/OR equivalent with CI brackets i/c labour, material, cutting and making good the wall, tiles etc. where ever required. Complete in all respect. (8.60)
1
-
-
Supply & fixing of both side laminated board (11mm thick) i/c labour & material, in already fixed aluminum door/partition etc. i/c clips, necessary hardware & wastage of material etc. Complete in all respect. (8.61)
1
-
-
Supply & fixing of A.C.P. (6mm thick) i/c labour & material, in already fixed aluminum door/partition etc. i/c clips, rubber bidding, necessary hardware & wastage of material etc. Complete in all respect. (8.62)
1
-
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of approval brand and manufacturere, i/c providing and fixing top and bottom pevit and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixin required door fittings, all complete as per direction of engineer incharge. (Door handle, lock, stoper etc. to be paid separately.). (8.63)
1
-
-
Providing and fixing stainless steel (grade 304) railling made of hollow tubes, channels, plates etc. i/c welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with fixing the railling with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer incharge. (for payment purpose only weight of stainless steel memberes shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (8.64)
1
-
-
Providing wood work in frames of doors, window, clerestory windows nad other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fasterner shall be paid for separately). Second class teak wood. (8.65)
1
-
-
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approval steel primer. (8.66)
1
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - Part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover. (8.67)
1
-
-
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/ structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joints with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stifened with bracings, runners, connecting with the building etc. whterever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge. Note- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. (8.68)
1
-
-
Providing and fixing white vitreous china extended wall mounting water closed of size 780x370x690 mm of approved shape including providing & fixing white vitreous chine cistern with dual flush fitting of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litre). including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete. (8.69)
1
-
-
Raising of main hole cover and fram slab to be required level i/c. dismantalling exiting slab and making good the damage as required (raising depth of main hole to be paid separately). (8.70)
1
-
-
Hacking of C.C. flooring/ payment/ C.C. road i/c. cleaning for surface etc. complete as per direction of engineer incharge. (8.71)
1
-
-
Construction of manhole of following sizes including PCC base 1:4:8, brick masonary wall with 1:3 cement ,coarse sand mortar finishing with neat cement slurry RCC slab with cover as required complete in all respect including all LMT. (8.72)
-
-
-
600 x 600 x 450 mm av. Depth. (8.73)
1
-
-
600x600x600 mm av. Depth. (8.74)
1
-
-
750x750x900 mm av. Depth. (8.75)
1
-
-
900x900x1200 mm av. Depth. (8.76)
1
-
-
1000x1000x1500 mm av. Depth. (8.77)
1
-
-
1200x1200x2000 mm av. Depth. (8.78)
1
-
-
Making connection of G I / PVC water supply line inlet with existing working line including all required labour and material complete. (8.79)
1
-
-
Making connection of sewer line with existing manhole including cutting & finishing with 1:3 cement, coarse sand mortar with neat cement for 250 mm dia.including dewatering work of existing manhole. (8.80)
1
-
-
SUB SECTION-I : Road Work (Item Sl. No. 9.01 to 9.11)
-
-
-
Repairs of damaged bricks soling roads by removing soling, leveling undulated surface upto 30 cm. depth by dressing or filling earth brought from outside compaction & leveling to desired level, slope & camber as directed , relaying removed brick soling to level camber & slope, filling joints & blinding with 1 cm thick layer of local earth, disposal of surplus earth, rubbish & debris including cost of replacement of broken bricks with new bricks, also including cost of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (9.01)
1
-
-
Repairing of pot holes, patches etc. on existing roads by preparing the patch in regular shape, by cutting upto 100 mm depth and size as reuired filling, ramming and compacting 20-25 mm gauge stone ballast, blinding with STONE DUST, cleaning with wire brush, surface dressing in 2 coats using 1.8 Kg./ Sq.M. bitumen and 1.5 Cu.M. per 100 Sq.M. stone aggregate 12.5 mm nominal size in first coat and 1.1 Kg. / Sq.M. stone aggregate 10 mm nominal size duly compacted with manual ramming including cost of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (9.02)
1
-
-
Repairing of damaged interlocking tiles by removing broken tiles of thickness 60 to 80 mm including levelling and dressing of surface to required level and slope, filling, joints with local sand including preperation of sub base as per standards, laying of 150 mm thick compacted 40-63 stone ballast alongwith 25% filler material, and thereafter laying of Sand layer of 50 mm before laying of tiles including cost of replacement of unserviceable / broken tiles with new tiles and also including the cost of all labour, T&P etc. complete as required for proper completion of the work including disposal of surplus earth, rubbish and debris etc. complete as per direction of Engineer Incharge. (9.03)
1
-
-
Repairing of damaged mastic asphalt wearing course by removing broken wearing course of thickness 40 mm with with paving grade bitumen meeting the requirements given in table 500 - 29, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing anti skit surface with bitumen precoated fine grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005 cum per 10 sq.m. and at an approximate spacing of 10 cm. centre to centre in both directions, pressed into surface when the temperature of surface is not less than 100 C protruding 1 mm to 4 mm over mastic surface disposal of surplus earth, rubbish and debris etc. including supply of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (9.04)
1
-
-
Providing and laying brick soling with straight over burnt brick laid on edge, laid dry with brick edging on both sides, including preparation of sub grade to required camber & slope, filling joints & binding with 1 cm thick local sand complete including cost of all material, labour, T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (10.05)
1
-
-
1st coat bitumen painting with 16-22.4 mm gauge stone grit over WBM surface including supply of bitumen, grit, fuel wood etc. and including of the maintenance of side pattries and watering them during operation as per direction of the Engineer Incharge including roller charges and its fuel, wages of fire and tar boiler man and T&P etc. as required for proper completion of the work as per MOT specification no. 506 including supply of all materials labour and T&P etc. as required for proper completion of the work a per direction of Engineer Incharge. (9.06)
1
-
-
Laying premix carpet 20 mm. thick over a tack coat (after execution of item no. 11.0 above )with graded approved grid and bitumen including heating the mix to required temperature, mixing either in mixer or in hand drum including cost & cartage of material at side patries and watering them curing operation for proper completion of the work as per direction of Engineer Incharge and a per MOST specification no. 507 including supply of all materials, labour and T&P etc. & machine required for proper completion of the work a per direction of Engineer Incharge. (9.07)
1
-
-
Providing and laying 40 mm thick compacted Semi dense Bituminous carpet type surfacing with 5.5% bitumen by weight of total mix and providing bitumen tack coat over painted surface @5 Kg. / 10 Sq.M. including cost of all material, labour, hire charges of Hot mix Plant and Machinery, T&P etc. as required for proper completion of the work as per MOST specification as directed by the Engineer Incharge. (9.08)
1
-
-
Cleaning of Existing black topped surface with brooms soft brushes and finally dusting with old gunny bags and for compressed air to receive bituminous treatment including cost of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (9.09)
1
-
-
Providing & laying B.M.premix 50 mm on prepared surface with 60/70 Bitumen @3.% Bitumen content by weight of total mix specified graded crushed aggregate for binding course including loading of course aggregates with F.E. Loader and hot mixing of stone aggregate and bitumen in H.M.P. transporting the mixed materials with paver and laying mixed materials with paver finished to the required level and grade rolling by power roller to achieved the desired density but including cost of tack cost including cost of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (9.10)
1
-
-
Providing and laying brick edging on both sides of the 1st class brick 8 cm.wide and 12 cm.deep laid with mud mortar all labour finished to the required template and in proper alignment and also including dressing and ramming the excavated earth including cost of all material, labour and T&P etc. as required for proper completion of the work as per direction of Engineer Incharge. (9.11)
1
-
-
Note:- Above rates are inclusive of all T&P, material and labour etc. required for proper completion of work. GST shall be paid extra as applicable.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements