Directorate Of Urban Local Bodies Tender

Supply & laying, spreading and compacting 53mm to 22.4 mm size stone aggregate of specified size to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requistices type of screeing/binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.

S/L Tack coat of bitumen @ 0.30 kg/m2 including heating the VG 10 bitumen spraying th bitumen with mechanically operated spray unit fitted on bitumen boiler & cleaning and prepairing the existing road surface etc all complete as per the direction of engineer-in-charge

S/L Hot applied Thermo plastic compound 2.5 mm thick including reflectorising glass beads @250 gms per sqm area thick ness of 2.5 mm is exclusive of surface to be level uniform and free from streak and holes. Rates all including of all taxes royality vat etc all t % p /machine material and labour required for proper complition of work .

Consolidation of Kankar by hand rammer including opening out stacks sorting kankar into three sizes, repairing patches in existing road surface with kankar making redhi to retain water and ramming and also including carriage of metal upto 30 meters (100 ft) carriage of water 200 metre supply and maintenance of barriers and all tools and plants required for proper completion of work, kankar to be supplied to the contractor free at site. I.S.I No-(755 A)

Reflective raised pavement marker providing and fixing of raised pavment markers (cat eye) type X ASTMD - 4956-04 avery dennission/3m (USA make ) having moulded body of polycabonate ASA] HIPS or ABS able to support a load of 13.635 MT tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H circular its reflective lens made of micro prismatic lence (capable of providing total internal reflection of light ), electronically welded to the body. The lenth, height and wiedth of the body shall not exceed 130mm 20mm, and 105mm respectively, The area of each reflective surface shall not be less than 13 sq. cm. on each side stoping at the angle of 35+5 degree to the base to ensure maximum reflective. it shall comply to specification of category A of MoRT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methy methecrylate corforming to ASTMD 788 or equivalent with 7 years warranty. Rate shall be inclusive of all taxes, royalty, VAT etc . All T&P machine and labour required for proper completion of work. SOR 2016 S.I No-9 New item

GST

S/L Bituminpus macadam using crushed stone aggregates of specified grading premixed with VG 10 bituminous binder,transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with sensor to the rquired grade, level and alignment and rolling with smooth wheeled , vibrator and tendem rollers as per specification to achieve the desired compactiion and density etc all complete as per specification on dirction by engineer-in-charge.