Directorate Of Urban Local Bodies Tender

Providing and laying Bituminous Concrete (BC) using crushed Kabrai aggregates of specified grading, premixed with bitumen VG-30 @ 5.40 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 no. 5.8 complete in all respects

P/L of Hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beeds @ 250 gram per sqm. Area thickness of 2.5 mm. is exclusive of surface applied glass beeds as per IRC 35. The finished surface to be level, uniform and free from streaks and holes LKO SOR ch 26 SI No 2 morth 803(8.13)

The solar studs shall be made of Aluminium alloy and poly carbonate material which shall be absolutely weather resistant and strong enough to support a load of 13,635 kg tested in accordance with ASTM D4280. Its colour may be white, red, yellow, green or blue or combination as directed by the Engineer. Its water resistance shall meet the requirements of IP 65 in accordance with IS:12063:1987 category 2 for protection against water ingress. The dimensions of solar studs shall not be less than 100 mm X 100 mm X 10 mm. It shall have super bright LEDs so as to provide long visibility from a distance of more than 800 m. Its flashing rate shall not be less than 1 Hz Its should be able to give the prescribed performance in the temperrature range of 40°C to +55°C. Its life shall be not less than 3 Years. The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge