Directorate Of Urban Local Bodies Tender

Refractory lining of the furnace and insulation. Hot face insulation bricks, Ceramic fibre, dead body support will be for furnace with Highly efficient insulation to maintain the temperature with 6 step in be used of 70% fire brick, 40% fire bricks good quality, light weight insulation bricks, 1” fibber insulation board quality, red bricks with plaster and frame work with fibber insulation

Electrical Control Panel for Furnace for auto ignition Control panel with 3 Phase Over load MCB , individual 3 Phase MCB, Control MCB, I.D. Fan Contractor & amp ; Over load Relay, Water Feeding motor , Temperature Controller 0-120 deg. Centrigrade, Thermocouple and Compensating lead , Out Put Warring etc as required

Track and Trolley 1) For Cow dung Cremation Furnace- 2 nos Made by section of size 100 mm x 50 m x 5 mm channel provided with complete arrangements for carrying the body completely made up of SS 304 3 MM THICK SHEET. 2) For Gas basesd Cremation furnace- High Scissor pallet hydralic trolly

SITC of Chimney Foundation for Chimney Size :- 4000 mm (W) x 4000 mm (L) x 1650 mm (H) for 3 units. Foundation Bolts L –type:- 36 mm (dia) x 950 MM (L)) with double nuts and washer x 150 mm long thread. Cone MS Cone 1200 mm bottom dia x 8 mm thickness x 3000 mm height Base plate:- 1800 mm x 1800 mm x 25 mm thick Top size of cone weided with 25 mm thick flange suitable for fixing with pipe. Service window 600 mm x 600 mm. Ribs :- 15 Nos: 600 mm x 200 mm x 10 mm Pipe 300 mm dia x 6 mm thick with 18 mm flange Welded Both Sides, having 20 mm dia holes suitable for fixing 18 mm dia high tensile bolts. Having 15 Nos. of ribs 125 mm x 100 mm x 10 mm thick. Ladder with Safety cage Monkeys type ladder with 50x 6 MS angle. Plate Form 02 Nos. for Smoke testing. Base made of 4mm wire mesh having spring std 1000 mm (H) x 1400 mm (W) etc. as required HEIGHT OF CHIMNEY WILL BE 12000 MM

02 Nos of LPG Burning System. 1 For Primary Chamber and 1 for Secondary Chamber. Primary burner with 20 kg per hour capacity and Secondary burner with 10 hour per kg capacity with proper Gas Line of MS from Gas to burners and all wirings.

SS Wet Scrubber for Gases and Pollution control size 900 MM total 3787 mm (L) with SS 304 horizontal round shape. Wet scrubber will be provided for gases and pollution control size of based dia 900 mm x 3 mm thick x 3787 mm (L) Outlet pipe lines, valves and necessary pumping unit fitted on water tank, minimum 1000 Lt capacity PVC over head tank for each unit furnace.

Design and Development of area of about 300 sq metres with an open truss shed/slab of 220 sq metres an open space of 40 sq metres for installation of chimney and foundation and 20 sq metres for greenery and other beauutifications like Large God Statue, CCTv Cameras, Dead Body waiting platform, Television, Computer, Texture Painting for Superior design, Big Hoarding Banners for advertisement, Speakers, Furniture, Small Fountain, Fire extinguishers to establish 02 nos of Gased based cremation furnace & 01 Nos of Cow Dung Cremation Furnaces and Equipments inside the Cremation Hall. The Hall will be having a truss at an appropiate height from the ground. Extra space for Chimney will be provided at the back of hall 40 sqmetre and also greenery should be done across the hall for beautification

O&M Charges for the 1st Year (Included)

O&M Charges for the 2nd Year

O&M Charges for the 3rd Year

O&M Charges for the 4rd Year

O&M Charges for the 5rd Year

GST