Directorate Of Urban Local Bodies Tender

Supply and burring of sale earthing electrode T – 19 Zn- Zinc coated, length up to 2000 mm outer pipe 48.4 mm x 3.2mm, inner pipe 26.9 mm x 2.6 mm, terminal dia. 12 mm, coating 80-100 micron filled with crystallinc conductive mixture (CCM) having anti corrosive & conductive properly with 50 Kgs. activated soil (BFC) capable of reducing the coil resistivity with good mixture of retaining capacity along with 30 cm squarare C.I. frame with hinged cover & masonary housing. (From electode terminal to switch board, cost of 25x3 G.I. stip will be extra). Make : as approved in U.P. P.W.D. & C.P.R.I. certified. PWD SOR 2017-18 S.I. No. 725-B.

Providing and fixing 25 mm x 5 mm G.I. Stril in 40 mm dia G.I. Pipe from earth electrode including connection with G.I. nut, bolt, spring washer excavation and re- filling etc. as required.

Supply and installation of Decorative Ornamental Pole. Total height of the pole shall be 3.5 m nominal above the ground. The pole is made out of grooved mild steel tube and Cast Iron in two steps. Cast Iron embellishments are fitted with the help of provided to accommodate a 6amp SP MCB and 32 amp heavy duty connector for mains connections in the bottom part of the pole as shown in attached drawing. The different sections of the pole are joined together by means of welded joints. MS PIPE POWER COATING. The Decorative Pole Shall be machined and Polish properly to give it a smooth surface. The Decorative Pole is duly pretreated by shot Blasting Process and Painted in U.V. ray resistant P.U. Coating in approved color shade. Devorative pole shall be installed at desired location including foundation of the pole by main Cement Concrete foundation of 1:2:3 (1 Cement : 3 Course sand : 6 Raded stone aggregate 40 mm nominal size) with the help of anchor bolts and 38 mm G.I. sleeve complete in all respect as required.

Supply and Installation of Decorative Sigle Arm bracket. The decorative bracket is made out of mild steel, Cast – iron & cast Aluminium. The mild steel, cast iron & Cast aluminium part are joined together 7 are fabricated to get the desired design. The Decorative Bracket shall be machined and Polished properly to ghive it a smooth Surface. The Decorative Bracket is duly pretreated by Shot blasting Process and painted in U.V. ray resistant P.U. coating in approved color shade. The decorative bracket should have the arrangement to fix the required luminaire. The bracket should have the arrangement suitable to be fitted on the required pole complete in all respect.

Supply and Installation of 72-84 W. Led based Decorative Luminaire. The Luminaire is made of Spun Aluminium A Polycarbonate Diffuser shall be fitted in the Luminaire. A Suitable Led Driver shall be Fitted inside the Luminaire. The Luminaire body should be machined and polished properly to give it a smooth surface. The Luminaire shall be Suitable for the fitment on the required Single are brackets. The Luminaire shall be duly pretreated and painted in U.V. ray resistant polyurethane paint in approved color shade. A two way connector is provided for the mains connections. The Luminaire is suitable for 240v, single phase, AC, Decorative Luminaire shall be installed at the desired location on the Double arm brackets equvivalent to (Make : Neri / Schreder / Lustre / Atlantis / Glowmac / Twinkle / May fair etc.).

Supplying and laying of following size DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 14930, Part II Complete with Fitting and cutting, Jointing etc. Direct in ground (At suitable depth below ground level) etc. Complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal).

Supply and fixing of plain of pin type copper cable socket (Lug) S.No. 504.

Supply and Wiring of submains with two nos. of 2.5 sq. mm. FR PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T & P required for proper completion of the work as directed at site by Engineer in charge. PWD SOR 2014 S.I. No. 289.