Directorate Of Urban Local Bodies Tender

12mm thick cement Plaster with cement mortar in proportion of 1:4 cement and corse sand in single coat on fair side of single or half brick wall for interior plastering including arises, interior rounded angles chamfers and of rounded angles not exceeding 80 mm in grit and finished even and smooth.(As per S.l no.2,sch 13.4 of SOR )

Providing and laying D.P.C 2.50 cm thick with cement concrete consisting of one part cement 1.5 part of course sand and three part of approved 10 mm graded stone grit and including water proofing martreail as apporved by the engineer -in- charge in the proportion as specified by manufacturer .(As per S.I no - 2 sch 361 of PWD) SOR

CEMENT CONCRETE PAVEMENT(C.C ROAD) constructionof un-reinforced plain cement concrete pavement thickness as per design. over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (grade) coarse and fine aggregates conforming to IS 383 maximun size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side fromwork (steel channel laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, admixtures as approved curing concrete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 (approved Quarri grit) Chapter 20 sl 23 SOR

R.C.C. work with cement approved coarse sand and 2cm (3/4")gauge approved stone ballast in the proportion 1:2:4 in lintel of doors and windows excluding supply of reinforcement and its bending the same with 24 B WG binding wire and necessary centering and shuttering etc, and also including supply of all materials labour and tools and plants etc required for proper completion of works.(As per S.I no 9 PWD 283 )SOR

Mild steel or iron such as in all r.c.c. work including benefit for proper completion of work and including supply of all metarials and labour etc. complete in all.(As per S.l no.3,sch 504 of PWD) SOR