Directorate Of Urban Local Bodies Tender

12 mm thick plaster with cement and Coar sand of 2.20 fineness les in 1:4 over brick work minimum thickness not to be less than 1cm. cluding supply of all materials, labour, tools & plants etc. equired for proper completion of the work.

Cement Concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.

MS or iron work of MS Grill & stair case railing and section such as holding down bolts, hold fast, tie rods grating etc wrought to required from including supply of steel bolts, nuts wastages etc and their fixing required for proper completion of the work.

Supplying, fitting and placing with MS bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 including bending for proper and necessary completion of the work and including supply of steel and wastages, bends, hooks and authorised overlapping shall be measurised as per direction of Engineer-in-charge.

R.C.C. work with Cement approved coarse sand and 2 .(3/4") gauge approved stone ballast in the proportions of 1:1.5:3 in lintels fo doors and windows excluding supply of nforcement and its binding but including its fixing and binding the same with 24 B.W. G.G.I., binding wire and including necessary ring and shuttering etc. and also including supply of all materials, labour and T & P etc. required for proper completion of the work. Excluding cost of Binding wire.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401

Construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 rade cement or any other type as per Clause 1501.2.2 M 30(Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete ixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the ork as per drawing), spreading the concrete with shovels, rakes, ted using needle, screed and plate vibrators and finished in inuous operation luding provision of contraction and construction joints, applying debonding strips, primer, sealant, near roaches to bridge/culvert and construction joints, admixtures as roved, curing of concrete slabs for 14- days,using curing compound re specified) and water finishing to lines and grade as per drawing and finished with Power Trowel Cum Floter-Trimix Flooring Machine

Supply and fixing of granite stone for inauguration

Add GST 18 %