Directorate Of Urban Local Bodies Tender

First class brick work in 1:4 cement and fine sand of 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.as si no.-305(a)

R.C.C. work with cement approved coarse sand and 2cm.(3/4") gauge approved stone ballast in proportion of 1:2:4 for slabs excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials,labour and T&P etc. required for proper completion of the work binding wire cost being included in the item.as si no.-284

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) brought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & over lapping & hooks.as si no.-504

Construcation of un-reinforceed, dowel jointed at expanssion and construction joint only, plain cement concrete payment, thickness as desing over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 M30 (Grade) coarse and fine aggregates conforming to IS: 383, Maximum size of coarse aggregate not exceeding 25 mm Mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design laid in approved fixed side lorwork (steel plates including leveling the formwork as per drawing)spreading the concrete with shovels rakes compacted using needle screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, constrution joint, applying deboning strips, primer, sealamt dwell bars, near approaches to bridge/culvert and construction joint, admixtures as approved, curing of concrete stabs for 14- days, using curing compound (Where specified) and water finishing to lines and grade as per drawing and tecnical aspcification clause 1501

12mm thick plaster with cement mortar in proportion of 1:4 cement & fine sand of 1.25 F.M.as si no.-584

Supply and fixing of shilapath/signboard i/c all comp.