Directorate Of Urban Local Bodies Tender

Providing and inecting chemical emulsion for preconstructional antitemite treatment and creating a chemical barrier under and alround the column pots wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.s.6313 (part II 1981) Alderine emulsifiable concertrate of any other approved material such as Heptrachlor of chlordan will be used. The rate of application of chemical emulsoin shll be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment junction of wall and the floor 7.5 liters/sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm (As per manufacturers standard dilution)

R.C.C. work with cement approved coarse sand and 2 cm Gauge approved stone ballast in the proportion of 1:1.5:3 in lintels of doors and windows exculuding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and T&P etc. required for proper completion of the work. strength of the concrete shall not beless than M-200. Same as above but for the lighter beams i.e. having spans upto 6 m. (Using 1:1,5:3 Mix concrete)

Same as above but for the slab i.e. having spans upto 6 m. (Using 1:1,5:3 Mix concrete)

As in item 6 above but in R.C.C Raft foundation and footing with approved stone ballast (Using 1:1,5:3 Mix conerete).

As in item 6 above but in columm with approved stone ballast (Using 1:1,5:3 Mix conerete).

Class M-150 brick work in 1:6 cement coarse sand (of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work

Class M-150 brick work in 1:6 cement and coarse sand mortar in super structure including supply of all materials, labour, tools and plants etc. required for proper completion of the work

Class-150 HALF brick work in 1:4 cement and COARSE sand mortar in Superstructure including supply of all materials, labour tools and plants, etc Required for proper completion of the work

P/F mild steel or iron in plain work such as reinforced concret or reinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.

12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor Two rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) I cement : 6 fine sand.

15mm cement plaster in single coat of Rough side of single of half brick wall for exterior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth No. extra for mixing any addive. 1 cement : 6 fine sand

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (40 mm thick floor)

Steel work in built up tubular (round, square of rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers ect, complter. electric resistance of including butt welded tubes

Providing corrugated G.S sheet roofing including vertical/ curved surface fixed with polymer coated J of L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. impet washers filled with white lead, including a coat of approved steel primer and two coats of approved paints on overlapping of sheets complete (up to any pitch in horizontal/vertical of curved surface), excluding cutting to size and shape wherver required 0.63 mm thick with zinc coating not less than 275 gm/m2

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts nuts & mm dia G. I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gm/m2

Providing and fixing 15 cm wide 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc, including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm/m2

Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surface up to 10 cm. width or girth of small articles not exceeding 0.10sqm in area white superior synthic enamel such as LUXOLE,3Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work For Steel Surface.

Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surface up to 10 cm. width or girth of small articles not exceeding 0.10sqm in area white superior synthic enamel such as LUXOLE,3Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work For Wooden l Surface.

P/F mild steel or iron in plain work such as reinforced concret or reinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge, Made fo G.I. wire of dia 4 mm

Angle iron door chaukhas 40*40*5

Z-Section with M.S. Grill

(a) Door chaukhats

(b) Window Chaukhats

Providing & fixing galss panes with putty and glazing clips in steel doors. Window, clerestory window, all complete with : 4.0 mm thick glass panes

(a) 30 mm thick including ISI marked stainless steel butt hinges with necessary screws single leaf

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coatin not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc, complete :250x16 mm

Providing and fixing aluminium tower bolts bolts, ISI marked anodised (anodic coatin not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with necessry screws etc, complete : (a) 250 mm x 10 mm

Providing and fixing aluminium handles, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent of dyed to required colour or shade, with necessary screws etc. complete : 125MM

Finishing walls with water-proofing in cement paint approved make such as super snowcem, durrocem, robiacedm, supercem quality and required shade on undecorated wall surface (two coat) overone and including one coat white after thoroughly brushing the surface to powdered materials including curing and cost of all materials,

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

E/work in excavation in fondation in mixed soil i/e Disposal of surplus earth 3 km distance.