Directorate Of Urban Local Bodies Tender

Providing and laying D.P.C 25 mm thick with Cement concrete consisting of 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 approved 5.6 mm graded Stone grit) and including water proofing martreial as approved by the Engineer-In-Charge in the proportion as specified by manufacturer. ( Ch-7, S.I. - 361A)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in :: Cement mortar 1:4 (1 cement : 4 coarse sand). Ch-6, S.I. 6.4.1)

12 mm cement plaster on brick work with cement mortar of mix (upto 10 mtr height from Ground level). 1:3 (1 cement : 3 coarse sand). Ch-13, S.I. 583)

Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level : (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Ch-5, S.I. 6a)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, including the cost of centering, shuttering, finishing and excluding reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). Ch-5, S.I. 8)

Steel reinforcement for R.C.C. Work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-mechanically Treated bars of grade Fe-500D or more. All Dia Bars

Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 600×600 mm size tiles. Ch-14, S.I. 16(ii)

S/F 6mm (1/4") thick china white glazed tiles on walls or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement jointed and polishing complete including supply of all materials, labours required for proper completion of the work. Ch-14, S.I. 628)

Earth work in carted soil (For 2 km lead) including ramming and dressing to required level and slops and including lift and lead, royality etc. required for completion of work as per direction of E/I.

Laying brick bats in pot holes including spreading, ramming, watering and T&P etc. required for proper completion of the work. (Including cost of brick Bats (Ch-20, S.I. 19 New)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (b) 40mm thick floor with 20 mm nominal size stone aggregate (Ch-14, S.I. 4b)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630×450 mm with a pair of 15 mm C. P. brass pillar taps. Ch-24, S.I. 3(i))

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580×440 mm with integral type foot rests. (Ch-24, S.I. 1)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore (Ch-23 SI -27)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore (Ch-23 SI -23)

Providing and fixing PVC pipe confirming to IS make working pressure 6 Kg./Cm2 incuding testing labour T&P and all complete fittings (Ch-23 SI -32 iii 110 mm dia)

Providing and fixing PVC pipe confirming to IS make working pressure 6 Kg./Cm2 incuding testing labour T&P and all complete fittings (Ch-23 SI -32 i 75 mm dia)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in- Charge. Concealed work, including cutting chases and making good the wall etc. (Ch-23 SI -9)

Providing and fixing white vitreous china flat back half stall urinal of size 580×380×350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: (a) Single half stall urinal with 5 litre PVC automatic flushing cistern

Female Urinal Pot. (14''X17''X04'') Premium Designer Luxurious Ceramic Floor Mount Urinal Pot for Ladies/ Female/ Girls/ WomenToilet/ Bathroom/ Washroom (WHITE)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including cost of all material, Labour, T&P etc. complete required for proper completion of the work. (Ch 15 SI 7)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with wooden Primer of approved brand and manufacture including cost of all material, Labour, T&P etc. complete required for proper completion of the work. (Ch 15 Si 4)

Finishing walls with Acrylic Smooth exterior paint (Apex) of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Ch 15 Si 21 New)

Providing and fixing angle/Tee iron frames for doors, windows and ventilators of mild steel Angle sections of size 35×35×5 mm, joints mitred and welded by angle iron 35×35×5 mm or 35×5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.) (Ch 10 SI 12)

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner.Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all completeas per manufacturer's specification and direction of Engineer incharge. Non decorative finish (matt finish) AS Per DSR No.9.142.1

S/F Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). including preparation of 50mm thick base with concrete 1:4:8 Cement, Coarse sand and 40 mm B/B complete as per E/I (Ch- 12SI -20)

Wiring point for light with 1.5 sq mm. FRLSH PVC insulted multistrand single core copper conductor cable in heavy Guage rigid PVC conduit pipe concealed in the wall complete with 14 SWG copper earth continuity wire, GP Box, piano type awitch & Ceiling rose/ angle/ batten holder on 3mm thick phenolic laminated backalite sheet etc Complete in all respect, as direct including matching colour wash Electric SOR Ch- 1 S.I. 131(C)

Wiring point for Exhaust fan complete with 1.5 Sq. mm. PVC insulated single core aluminium conductor cable in heavy guage PVC conduit pipe with 1.5 sq. mm. RLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit, concealed in the wall, complete GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm. thick phenolic laminated backelite sheet etc., complete in all respects, as directed including matching colour. Electric SOR Ch- 1 S.I. 137( C)

Supply & fixing of LED tube light with batten suitable for up to 1 x 22 watt. LED tube light including tube etc on surface complete in all respect. S.I. 1413 CAT-AA.

Supply & fixing of 40 Amp. DP MCB (10 KA) C Curve. S.I. 1010

Supply & fixing of Power Plug with 15A/250 Volts Flush type Switch and 5 pin 15 A/250 Volts flush type Socket Complete. S.I. 1139.

Supply and fixing of BAJAJ Exhaust Fan 300 mm at Market rates

Suppling, assembling and fixing 2HP Residential Water Pump with Electric wiring, Starter panel Etc, complete in all respect.

Suppling and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all materials, labours and T&P etc. for proper completion of the work. Tank should be ISI marked, Sintex or equivalent and I/C all taxes. For 500 litres. (CH-19, Sl.2c)

Providing / Laying of inauguration board complete item.