Directorate Of Urban Local Bodies Tender

M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a

M-150 brick work in 1:4 one cement and four course sand . mortar in super structure including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a +309+310

12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)

Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)

Consinction of un-reinforced dowel jointed at expansion and constuction joint only plain cement concrete pavement thickness as per disig over a pepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:1.5:3) coarse and fine aggregates confirming to lS 383 maximum size of coarse aggegate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cyn capicity and appropriate weight batcher using approvd mix design lald in approved fixed side form work (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) sprading the concrete with shovels, rakes compacled using needing screed and plate vibxators and finished in constinous operating including provision of contraction and expansion construction joints as per norms applying debonding strips primer sealant dowel bars near approaches to bridgel culvert and construction joints admixtures as approved curing of concrete slabs for 14 days curing compound (Where specifled) and water finishing to lines and grade as per drawing and Technical Speification Clause 1501 inclding cost of Polythene also including (without dowel Bat) Sl No. 10.29 new item 9(1)

providing laying spreading and compacted 22.40-53 mm graded stone aggregate with fine sand , laying in uniform compacted layers of 100 mm thick with hand roller in sub base/base course on well prepared surface and compacting including all T&P taxes & labour cess etc as directed by engineer in charges etc all. complete as per technical specification clarse 406.

R.C.C. Raft foundation and footing with 4 cm. Gauge stone ballast. But with CC 3:1½:1 (S.I. 287 a)

As in item 283 above but in R.C.C. column in 1:1½:3 (S.I. 289)

R.C.C. in 1:1½:3 but in plinth beam and lighter beam having spans upto 6 M. (S.I. 286)

M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks and authorized overlapping shall be measured and including cost of binding wire.

M.S. or iron work in stair case roilling in heavy sizes such as trusses, built up gates, records racks, roof work, Gates etc including rivetting or welding where necessary. (S.I. 502a)

Supply and fixing Galvanized corrugated iron roofing 24 B.W.G. in position including supply of all materials, labour, Tools &plants etc. required for proper completion of the work and including wastage.as si no 536

External W/S arrangements with T.W boring of 150 mm dia with 110 mm dia pvc pipe assemble, of 1 hp submersible pump including suplly of all accessories starter, panel etc & pipe arrangements etc

paniting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials labour Tools & plants etc required for proper completion of the work paint to be used ISI Marked. (S.I. 644 )

As in item (644) above but for two coat after firtst coat. (S.I. 645' )

Finishing wall with water proof paint of approved make and quality with three coat as per SI No 660,661

S/F sign board with all complition.

GST 18%