Directorate Of Urban Local Bodies Tender

cement concrete with 4 cm. Gauge approved stone ballast coarse sand and cement in proportion of 1:4:8 including supply of all materials,labour and T & P etc.required for proper completion of work . S.I. No. 281

R.C.C. Work with cement ,approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:2:4 in slab excluding supply of reinforcement and its bending , but including its fixing and binding the same with 24 B.W.G.G.I.binding wire and including necessary centering and shuttering etc. and supply of all materials , labour, Tools & plants etc. required for proper completion of the work binding wire of supplied by the contractor free of cost inculiding making of drip coarse.S.I.No. 283

R.C.C. Work with cement ,approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending , but including its fixing and binding the same with 24 B.W.G.G.I.binding wire and including necessary centering and shuttering etc. and supply of all materials , labour, Tools & plants etc. required for proper completion of the work binding wire of supplied by the contractor free of cost .but for slab.S.I.No.284

Mild Steel or iron in Plain work such as Reinforcement concrete Or Reinforcement Brick Work brought to required shape as necessary including bending for proper completion of all steel.S.I.No.504

Mild steel or iron work in heavy sizes such as trusses ,built up gates, door, frames, record racks, roof work, gates etc. Wrought to required form including drilling holes, rivetting or welding necessary, and also including supply of steel, bolts and nuts S.I.No.503

Cleaning silt drain malwa with disposal and duraboard use in c.c. Road , barricating, patch work etc all complete work

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader / tractor mounted appropriate equipment on prepared surface , mixing by mix in place method with rotavator at OMC, and compacting with smooth MORD specifications 401.

cement concrete with 2cm gauge approved stone grit , coarse sand & cement in the proportion of 1:1.5:3 in cc pavement (thickness as per design ) cement coarce &fine aggregate confirming to IS standard mixed in concrete mixture / plant of not less then 0.2 cum capacity & appropriate weight batcher using approved mix design , laid in approved fixed form work (steel channel) laying and fixing of 125 micron thick polythene film wedges , steel plates including leveling the form work spreading the concrete with shovels , rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including hassion cloth for curring of concrete pavements for not less then 14 days curring compound (where as specified ) and water finishing to lines & grade including supply of all material , labour, tools& plants etc. required for proper completion of the work and also including complete shifting of recron 3S fibre reinforcement material etc & concrete etc. NEW ITEM 3( p.no 49)

P&L old c.c. interlocking tiles at site all complete work.

Supply & Fixing 80mm thick precast cement concrete I -Shape' Interlocking paver block a with top layer of minimum 8 mm thickness having plan dimension 200x(160+120mm) of o.p. Cement ,smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 30Mpa (M-30) and weight 5kg per no.confirming to IS; 15658-2006 with a 4 cm thick layer of fine sand.including cost of material , labour ,T & P TAXES etc. required for proper completion of the work as directed by Engineer -in-charge. S.I.No. 5(1)

ADD GST @18 %