Directorate Of Urban Local Bodies Tender

S/L P:C:C (1:6:12) with 40 mm gauge brick ballast ,fine sand of 1.25 f.m and cement in foundation and under floor including all materials, labour, tools, & plant etc all completed as per the direction of engineer - in - charge.

12 mm thick plaster with cement and coarse sand in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work.

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : (i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. (iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral staircases above plinthlevel up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived from Recycled Concrete Aggregate(RCA) upto 20%: 3 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 20%)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand):

Double action hydraulic floor spring with stainless steel cover plate

Wiring point for light with 1.5 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside PVC conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG GI earth continuity wire, piano type switch & ceiling rose/angle/batten holder on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed. including matching colour wash

LED COB lights as per specification(12 WATT)

Mirror/Tube ligts as per the desgin

Wiring point for fan/fresh air fan with 1.5 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside PVC conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG GI earth continuity wire, piano type switch & ceiling rose/angle/batten holder on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed. including matching colour wash

Fan standard quality as per the specification

Wiring point for call bell with 1.5 Sqmm FRLSH PVC insulated multistrand copper conducter cable as earthwire drawn inside PVC conduit concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complte with 14 SWG copper with earth connectvity wire and piano type bell push or 2 pin socket etc, complete all respect including maching colour wash.

Wiring point for Plug with 1.5 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside PVC conduit pipe concealed in the wall complete and partly laid in slab alongwith the reinforcement before concreting] complete with 14 SWG GI earth continuity wire, piano type switch & socket on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect, as directed.including matching colour wash.

Wiring point for HPMV/ Power Plug with 1.5 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside PVC conduit pipe concealed in the wall complete and partly laid in slab alongwith the reinforcement before concreting] complete with 14 SWG GI earth continuity wire, 15 amp. piano type switch & socket on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect, as directed.including matching colour wash.

S/Wiring of submain with one number 2.5 sqmm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside 20mm dia heavy duty PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG GI earth continuity wire including matching colour wash etc complete in all respect.

S&F of 6 Amp to 32 Amp S.P. M.C.B.(10KA) C curve. Cat-A

S/F surface/flush mounting 4 ways SPN distibution board without MCB complete in all respect,as directed by the Engineer in charge. Cat-A

S&F of 63 Amp D.P. Isolater. Cat-A

Supply and fixing of swich box 100x100x65 mm size of approved makemade up of 1.0 mm thick ISI marked G.P. Sheet all 4 coners folded & spot welded for screw and holes pluged with PVC Nylon caps. Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes should be semi-shuttered type and fitted with heavy brass earth pillar duly screwed and brand name should be emposed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar including maching colour wash with S/o all material labour & T&P required for proper completion of work as directed at site by the Engineer in Charge.

Supply and fixing of swich box 175x100x65 mm size of approved make made up of 1.0 mm thick ISI marked G.P. Sheet all 4 coners folded & spot welded for screw and holes pluged with PVC Nylon caps. Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes should be semi-shuttered type and fitted with heavy brass earth pillar duly screwed and brand name should be emposed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar including maching colour wash with S/o all material labour & T&P required for proper completion of work as directed at site by the Engineer in Charge.

Supply and fixing of swich box 200x250x65 mm size of approved make made up of 1.0 mm thick ISI marked G.P. Sheet all 4 coners folded & spot welded for screw and holes pluged with PVC Nylon caps. Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes should be semi-shuttered type and fitted with heavy brass earth pillar duly screwed and brand name should be emposed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar including maching colour wash with S/o all material labour & T&P required for proper completion of work as directed at site by the Engineer in Charge.

Supply and burying earth electrode for lighting conductor of 600 mm x 600mm x 6 mmG.I. plate vertically for earthing with its top at least 3 meters below ground level complete with 20 mm dia. G.I pipe for watering funnel, 30 cm square C.I. frame with hinged cover masonary housing alternate layers of charcoal/ coke and salt at least 150 mm thick around etc as per directions of E/I complete in all respect.

Supply and fixing of vertical down conductor of 32mm x 6mm G.I strip etc. on approved clamps on surface for lighting conductor complete in all respects. (For three or four storeyed buildings.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing wall with Acrylic smooth exterior paint

Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineerin- Charge. (Single / double glass panes,wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Glass Door

Add Consultancy Fee (Excluding GST)

GST