Directorate Of Urban Local Bodies Tender

M-150 Brick work in 1:3 one cement and three course sand mortar in superstructure including necessary cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick Add extra labour to above items.

Cement concretre with 4cm gauge approved stone ballast coarse sand & cement in the proportion of 8:4:1 including supply of all matetials labour tools & plant etc requrad for proper completion of the work

4cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm (I") graded apprved stone grit laid in panels finished with 3mm (1/8) floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over but without base concrete.

P/L of 12mm thick cement plasterin 1:3 cement & C sand mortar

steel work welded in built up sections/framed work, including cutting hoisting fixing in position and applying a primer coat of approved steel primer using structural steel etc as required in gratings frames guard bar ladder railings brackets ates and sim

Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry jointing and polished of approved quiality complete including supply of all materila labours t&p etc required for proper completion of the work as per direction of Engineer in charge.

Supply and fixing 6mm (¼") china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finised with white cement slurry jointing and polishing complete including supply of all materials labour and T&P and plants.

Chequered terrazo tiles 22mm thick with graded marble chips of size up to 6mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20mm thick bed of cement mortar 1:4 (I cement 4 coares sand)

Providing and fixing white vitreous china flat back falf stall urinal of size 580x380x350mm with white pvc automtatic flushing cistern with fittings standard size CP brass flush pipe spreaders with unions and clamps (all in CP brass) with waste fittings and cutting and making good the walls and floors wherever required (Single half stall urinal with 5 litre pvc automatic flushing cistern)

Providing and fixing stainless steel (grade 304) railing made of hollow tubes channels plates etc including welding grinding buffing polishing and making curvatre (wherever required) and fitting the same with necessary stainless steel nuts and bolts complte i/c fixing the railing with neccessary accessories & stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer incharge (for payment purpose only weight of stainless steel mambers shall be considered excluding fixing accessories such as nuts bolts fasteners etc.

Manufactring supplying and fixing retro reflective overhead signage board made up of 2 mm thick aluminium sheet face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming type III of ASTM-D-4956-01 as approved by Engineer in charge letters borders etc as per IRC 67-2001 in silver white with blue colour back ground and with high internsity grade pasted on substrate by pressure sensitive adhesive backing which shall be activated y applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminiom alloys rivets or bolts & nuts @300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the

Providing corrugated GS sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks bolts and nut 8 mm fiameter with bitumen and GI limpet washers or with GI limpet washers filled tiwh white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pithc in horixontal/vertical or curved surfaces) excluding the cost of purlins rafters anf trusses and including cutting to size and shape wherver rquired 1.00mm thick with zine coating not les

Sanitary Fitting work…… etc. with AC

Electrician fitting work……. Etc. with AC