Directorate Of Urban Local Bodies Tender

Providing and laying in cement concrete 1:4:8 ( 1cement : 4 fine sand : 8 graded brick aggregate 40mm nominal size ) and curing complete, including cost of formwork in foundation.chapter 5 sl no 3 sor 275

R.c.c. footing Work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:2:4 in R.c.c. excluding supply of reinforcement. Chapter 5 sl no 20 sor 4.6

R.c.c. column Work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:2:4 in R.c.c. excluding supply of reinforcement. Sl no 14 sor 288

R.c.c. plinth beam and other beam having spans upto 6 metres Work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:2:4 in R.c.c. excluding supply of reinforcement. Chapter 5 sl 15 sor 289

R.c.c. Slab Work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:2:4 in R.c.c. excluding supply of reinforcement. Chapter 5 sl 14 sor 288

Mild steel or iron such as in all r.c.c. work including benefit for proper completion of work and including supply of all metarials and labour etc. complete in all chapter 10 sl 3 sor 504

First class Brick Work in 1:4 cement and coarse sand of 1.25 finesand modulous mortar in foundation and plinth including supply of all materials, labour , tools and plants etc. required for proper completion of the work. Chapter 6 sl 1 sor 303

Providing and laying integral cement based treatment (Brick Coba) for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in- Charge and consisting of: (i) 1st layer of 22mm to 25mmthick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the levelling course (levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.

Providing and laying cement concrete 1:2:4( 1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) and curing comlete, including cost of formwork .(As per S.l no.19,sch 4.5 of SOR)

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Supply & fixing rainwater pipe, 2.No water tank 1000L & material (Nahani trap , gully trap , stoneware trap , water supply pipe etc.) for drainage of sanitary work & submersible set & bore complete chapter no14 sl no7 sor 665.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregates of 20mm nominal size) laid in one layer finished with floating cost of neat cement (40mm thick floor). Approx

Providing and laying of 8 to 10mm ivory or light shade vitrified tiles of 300 x 300mm size in flooring or skirting laid with 1:4 cement mortar(1 cement :4 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete including supply of all materials labour and T&P etc. required for proper completion of work.(As per S.l no.27,sch 11.41 of SOR)

Providing & fixing 1mm thick M.S sheet door witch frame of 40 x 40 x 6mm angle iron 3.1mm (1/8") thick M.S Gusset. Plates at the junction and corner including cutting , welding & wastage & supply of all material , labour T&P etc. required for proper completion of work. chaper 10 sl no 1 sor 502

Providing and laying in cement concrete 1:4:8 ( 1cement : 4 fine sand : 8 graded brick aggregate 40mm nominal size ) and curing complete, including cost of formwork in foundation.

Providing and laying cement concrete 1:2:4( 1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) and curing comlete, including cost of formwork .(As per S.l no.19,sch 4.5 of SOR)

12mm thick cement Plaster with cement mortar in proportion of 1:4 cement and corse sand in single coat on fair side of single or half brick wall for interior plastering including arises, interior rounded angles chamfers and of rounded angles not exceeding 80 mm in grit and finished even and smooth.(As per S.l no.2,sch 13.4 of SOR )

Distempering with oil bound distemper of approved brand & manufacture ang og required shade on undercated wall surface to give material , labour , T&P etc complete in all chapter 15 sl no 13 sor 649

Finishing walls with premium acrylic smooth exterior paint water proofing cement paint with silicon additives of required shade : primer applied @2.2kg / 10sqm. Chapter 15 sl no 35

Painting iron work in large area with one coat of ready mixed priming paint one coat of approved paint including supply of all materials,labour, and t&p etc. required for proper completion of work, Paint to be used should confirm the I.S.I no. 103 1950

Supply & Fixing of inauguration stone.