Directorate Of Urban Local Bodies Tender

Providing and laying bituminous concrete with HMP crushed aggregates from approved quarry of specified grading, premixed with bituminous binder (VG-30) @ 5.4 per cent by weight of total mix and filler

S/L Hot applied Thermo Plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area thick ness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35. the finished surface to be level uniform and free from streak and holes. rates all including of all taxes royality vat etc all t & p /machine material and lobour regquired for proper complition of work.( SOR 2022 SI.N. 22.02 NEW ITEM)

Reflective Raised pavement marker providing and fixing of raised pavment markers (cat eye) type x ASTMD - 4956-04 avery dennission /3m (USA make) having moulded body of polycabonate ASA, HIPS or ABS able to support a load of 13.635 MT tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H circular its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light ), electronically welded to the body. The length, height and wiedth of the body shall not exceed 130mm 20mm, and 105mm respectively, The area of each reflective surface shall not be less than 13 Sq. cm. on each side stoping at the angle of 35+5 degree to the base to ensure maximum reflectively. it shall comply to specification of category A of MoRT&H |circular no. RW/NH 33023/10/97-DO-Ill dated 11.06.97 lenses shall be moulded of methyl methecrylate corforming to ASTMD 788 or equivalent. with 7 years warranty. Rate shall be inclusive of all taxes, royalty, VAT etc. All T&P machine and labour required for proper completion of work.Note: The composite warranty jointly signed by original manufacturer & autho

Retro reflecting sheeting type-X1 with 4mm thick ACM single side providing and Fixing of reflective sign with a corrison resistant 4mm thick 0.4 to 0.5 both side aluminium skin aluminim composite panel face to be fully covered with high intensity prismatic sheeting type IV as per IRC:67:2012 retro reflecting sheeting with back frame MS angle 35*35*5 mm Legends, Letters, numerals and border etc.should be as per MoRTH specification. No.801.3.7 The sheeting shall have a presure sensitive adhesive of the aggressive -tack type requiring no heat, solvent other preparation for adhesion to a clean smooth surface ,in a manner recommended by the sheeting manufacturer. The ACM ( Aluminium composite Materials ) shall be fixed on the back frame MS Angle with riveting .Micro prismatic type IV retro reflecting sheeting confirming to ASTM 04956-09 shall be pressure fixed .The retro reflective Sheeting shall be tested for certificate of having the sheeting tested for coefficient o f retro reflection , daytime colour and luminance ,shrinkage,flexibility,liner removal,adhesion,impact resistance,specular as per direction of in charge Engineer

GST