Directorate General Of Hydrocarbons Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Directorate General Of Hydrocarbons - DGH Tender
Civil Works Buildings
Coronavirus COVID 19
Eprocure
Opening Date18 Mar 2020
Closing Date14 May 2020
Tender AmountRefer Documents
Costs
EMD
₹ 1,86,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Building Maintenance Contract For Dgh Offices, Noida
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_DGH_553326_1Bid Award Id
ViewTender No
MM-12017/14/2020/ENQ/178Tender Authority
Directorate General Of Hydrocarbons ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Building Maintenance contract for DGH offices for a period of one year
BOQ Items
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
10
-
-
Providing & Laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
10
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
10
-
-
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
10
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up tofloor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
10
-
-
Centring and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ).
10
-
-
Centring and shuttering including strutting, propping etc. and remova of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers.
10
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars
10
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
10
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level: Cement mortar 1:4 (1 cement :3 coarse sand)
10
-
-
Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately).Raj Nagar Plain white marble / Udaipur green marble / Zebra black marble.Area of slab over 0.50 sqm.
10
-
-
Providing and Fixing 18mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels : Raj Nagar Plain white marble / Udaipur green marble / Zebra black marble. Area of slab over 0.50 sqm.
10
-
-
Providing & Fixing 18mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels : Granite of any colour and shade. Area of slab upto 0.50 sqm.
10
-
-
Providing and Fixing 18mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels : Granite of any colour and shade. Area of slab over 0.50 sqm.
10
-
-
Providing edge moulding to 18mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in Charge. Marble work.
10
-
-
Providing edge moulding to 18mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in Charge. Granite work.
10
-
-
Extra for Providing & fixing marble/granite stone over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin based adhesive including cleaning etc. complete.
10
-
-
Extra for providing opening of required size & shape for wash basins / kitchen sink in kitchen platform, vanity counters and similar location in marble / Granite / stonework including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.
10
-
-
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
10
-
-
Providing and fixing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately):Kiln seasoned and chemically treated Hollock wood.
10
-
-
Providing and fixing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Kiln seasoned and chemically treated hollock wood.
10
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding, panelling which will be paid for separately. Second class teak wood.35mm thick shutters.
10
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding, panelling which will be paid for separately.Kiln seasoned and chemically treated Hollock wood. 35mm thick shutters.
10
-
-
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including black enamelled ISI marked M.S butt hinges with necessary screws. Second class teak wood 35mm thick.
10
-
-
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including black enamelled ISI marked M.S butt hinges with necessary screws. Kiln seasoned and chemically treated Hollock wood 35mm thick.
10
-
-
Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) :12mm thick
10
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws
10
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30mm thick including ISI marked Stainless Steel butt hinges with necessary screws
10
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
10
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
10
-
-
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) : On one side only
10
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
10
-
-
Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both directions with wire of dia. 0.63mm for doors, windows and clerestory windows with hinges and necessary screws: 35mm thick shutters , Second class teak wood.
10
-
-
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class teak wood 50x12mm.
10
-
-
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class teak wood 50x20mm.
10
-
-
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: Hollock wood 50x12mm
10
-
-
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: Hollock wood 50x20mm.
10
-
-
Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.
10
-
-
Providing and fixing teak wood lipping of size 25x3mm in pelmet.
10
-
-
Providing and fixing curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20mm dia.
10
-
-
Providing and fixing curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 25mm dia.
10
-
-
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets: 20mm dia (heavy type).
10
-
-
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets: 25mm dia (heavy type).
10
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
10
-
-
Providing and fixing hard drawn steel wire fabric 75x25mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19mm beading of second class teak wood.
10
-
-
Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised MS wire gauze with average width of aperture 1.4mm in both directions with wire of dia. 0.63mm.With 2nd class teak wood beading 62X19mm.
10
-
-
Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised MS wire gauze with average width of aperture 1.4mm in both directions with wire of dia. 0.63mm.With 12mm mild steel U beading.
10
-
-
Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete: 125x90x4.00mm.
10
-
-
Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete: 100x75x3.50mm.
10
-
-
Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete: 75x60x3.10mm.
10
-
-
Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete: 50x40x2.50mm.
10
-
-
Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete: 50x40x2.50mm.
10
-
-
Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. :125mm.
10
-
-
Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. :100mm.
10
-
-
Providing and fixing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.Overall width 35mm
10
-
-
Providing and fixing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.Overall width 50mm.
10
-
-
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 250x10mm.
10
-
-
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 200x10mm
10
-
-
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 150x10mm.
10
-
-
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 100x10mm.
10
-
-
Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete: 125mm.
10
-
-
Providing and fixing ISI marked oxidised M.S. handles conforming to IS :4992 with necessary screws etc. complete: 100mm.
10
-
-
Providing and fixing ISI marked oxidised M.S. handles conforming to IS :4992 with necessary screws etc. complete:75mm.
10
-
-
Providing & Fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete: 125x64x2.50mm.
10
-
-
Providing & Fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete: 100x60x2.50mm.
10
-
-
Providing & Fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete: 75x50x2.50mm.
10
-
-
Providing & Fixing bright finished brass butt hinges with necessary screws etc. complete: 125x85x5.5mm (heavy type)
10
-
-
Providing & Fixing bright finished brass butt hinges with necessary screws etc. complete: 125x70x4mm (ordinary type)
10
-
-
Providing & Fixing bright finished brass butt hinges with necessary screws etc. complete: 100x85x5.5mm (heavy type)
10
-
-
Providing & Fixing bright finished brass butt hinges with necessary screws etc. complete: 100x70x4mm (ordinary type)
10
-
-
Providing & Fixing bright finished brass butt hinges with necessary screws etc. complete: 75x65x4mm (heavy type)
10
-
-
Providing & Fixing bright finished brass butt hinges with necessary screws etc. complete: 75x40x2.5mm (ordinary type).
10
-
-
Providing & Fixing bright finished brass butt hinges with necessary screws etc. complete: 50x40x2.5mm (ordinary type).
10
-
-
Providing & Fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 250x10mm.
10
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 200x10mm.
10
-
-
Providing & Fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 150x10mm.
10
-
-
Providing & Fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 100x10mm.
10
-
-
Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm
10
-
-
Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm
10
-
-
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
10
-
-
Providing & Fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality).
10
-
-
Providing & Fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 65mm.
10
-
-
Providing & Fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 75mm.
10
-
-
Providing & Fixing 50mm bright finished brass cupboard or wardrobe knob with necessary screws (best make of approved quality).
10
-
-
Providing & Fixing bright finished brass handles with screws etc. complete: 125mm.
10
-
-
Providing & Fixing bright finished brass handles with screws etc. complete: 100mm.
10
-
-
Providing & Fixing bright finished brass handles with screws etc. complete: 75mm.
10
-
-
Providing & Fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
10
-
-
Providing & Fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.
10
-
-
Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms
10
-
-
Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 250 mm weighing not less than 330 gms
10
-
-
Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 200 mm weighing not less than 330 gms
10
-
-
Providing & Fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 150mm.
10
-
-
Providing & Fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 115mm.
10
-
-
Providing & Fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 90mm.
10
-
-
Providing & Fixing chromium plated brass 100mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).
10
-
-
Providing & Fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality).
10
-
-
Providing & Fixing chromium plated brass handles with necessary screws etc. complete: 125mm.
10
-
-
Providing & Fixing chromium plated brass handles with necessary screws etc. complete: 100mm.
10
-
-
Providing & Fixing chromium plated brass handles with necessary screws etc. complete: 75mm.
10
-
-
Providing & Fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:125x75x4mm.
10
-
-
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300 x 16 mm.
10
-
-
Providing & Fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 250x16mm.
10
-
-
Providing & Fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 300x10mm.
10
-
-
Providing & Fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10mm.
10
-
-
Providing & Fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 200x10mm.
10
-
-
Providing & Fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 150x10mm.
10
-
-
Providing & Fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 100x10mm.
10
-
-
Providing & Fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125mm.
10
-
-
Providing & Fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 100mm.
10
-
-
Providing & Fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 75mm.
10
-
-
Providing & Fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper.
10
-
-
Providing & Fixing bright finished brass 100mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality).
10
-
-
Providing & Fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod.
10
-
-
Providing & Fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height).
10
-
-
Providing & Fixing 2nd class teak wood lipping / moulded beading or taj beading of size 18X5mm fixed with wooden adhesive of approved quality and screws / nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-Charge.
10
-
-
Providing & Fixing magnetic catcher in cupboard / wardrobe shutters including fixing with necessary screws etc. complete (Best make of approved quality) : Triple strip vertical type.
10
-
-
Providing & Fixing powder coated telescopic drawer channels 300mm long with necessary screws etc. complete as per directions of Engineer in-charge.
10
-
-
Providing & Fixing sliding arrangement in racks / cupboards / cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately).
10
-
-
Providing & Fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to. be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge.
10
-
-
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame
shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and
20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters
10
-
-
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame
shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and
20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick pre laminated PVC door shutters
10
-
-
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood
10
-
-
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood
10
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62X19 mm.
10
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete With 12 mm mild steel U beading.
10
-
-
Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.
10
-
-
Providing and fixing plain lining with necessary screws/nuts & bolts/nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge(Frame work shall be paid for separately). 12mm thick commercial ply conforming to IS : 1328 BWR type
10
-
-
Providing and fixing 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineerin- charge. Non decorative finish (matt finish)
10
-
-
Providing and fixing 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineerin- charge. Non decorative finish (wood grained finish)
10
-
-
Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
10
-
-
Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete.Hot finished welded type tubes.
10
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
10
-
-
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides.
10
-
-
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.
10
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
10
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes
10
-
-
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
10
-
-
Brick on edge flooring with bricks of class designation 75 including cement slurry etc. complete in cement mortar with F.P.S. bricks: 1:4
10
-
-
Cement plaster skirting (up to 30cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement.18mm thick.
10
-
-
Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-Charge) over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with:Makrana white second quality.
10
-
-
Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-Charge) over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with Udaipur green marble.
10
-
-
Extra for pre finished nosing to treads of steps of marble stone.
10
-
-
Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre.
10
-
-
Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) :25mm thick.
10
-
-
40mm thick fine dressed stone flooring over 20mm (average)thick base of cement mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.Red sand stone.
10
-
-
Extra for Kota stone / sand stone in treads of steps and risers using single length up to 1.05 metre.
10
-
-
38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete.
10
-
-
Laying Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement Mortar 1:4 (1 cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.
10
-
-
Providing and laying Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of cement Mortar 1:4 (1 cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.
10
-
-
Laying rectified Glazed Ceramic floor tiles 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20mm thick Cement Mortar 1:4 (1 cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.
10
-
-
Laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm.
10
-
-
Providing & Erecting corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required-0.63 mm thick with zinc coating not less than 275gm/m2.
10
-
-
Providing &Erecting ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275gm/m3
10
-
-
Providing & Fixing insulating board ceiling of approved quality with necessary nails etc. complete (framework to be paid separately):White face insulating board- 12 mm thick
10
-
-
Providing & Applying 10mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level over first class kail wood strips 25x6mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately)
10
-
-
Providing extra for any sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling.
10
-
-
Providing & Fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes-75 mm dia
10
-
-
Providing & Fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes-110 mm dia
10
-
-
Providing & Fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.-coupler 75 mm.
10
-
-
Providing & Fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.-coupler 110 mm.
10
-
-
Providing & Fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Single tee without door-75 mm X 75 mmX 75 mm
10
-
-
Providing & Fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Single tee without door-110x110x110 mm.
10
-
-
Providing & Fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.-Bend 87.5°-75 mm Bend.
10
-
-
Providing & Fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.-Bend 87.5°-110 mm Bend.
10
-
-
Providing & Fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement: 4 coarse sand) and making good the wall etc. complete.-75 mm.
10
-
-
Providing & Fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement: 4 coarse sand) and making good the wall etc. complete.-110 mm,
10
-
-
Providing & fixing inlet mouth of rain water pipe cast iron diameter and weighing not less than 440 grams.
10
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle
hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges
of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming IS: 2095 I
10
-
-
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
10
-
-
Provide 12mm cement plaster of mix:1:4 (1 cement : 4 fine sand)
10
-
-
Providing 15mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement : 4 fine sand)
10
-
-
Providing 12mm cement plaster of mix:1:4 (1 cement : 4 coarse sand).
10
-
-
Providing 15mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement : 4 coarse sand)
10
-
-
Providing 12mm cement plaster finished with a floating coat of neat cement of mix:1:3 (1 cement : 3 fine sand).
10
-
-
Provide 12mm cement plaster finished with a floating coat of neat cement of mix:1:4 (1 cement : 4 fine sand)
10
-
-
Providing 15mm cement plaster on rough side of single or halfbrick wall finished with a floating coat of neat cement of mix :1:3 (1 cement : 3 fine sand).
10
-
-
Providing 15mm cement plaster on rough side of single or halfbrick wall finished with a floating coat of neat cement of mix :1:4 (1 cement : 4 fine sand).
10
-
-
Providing cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement.12mm cement plaster
10
-
-
Providing 15mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.
10
-
-
Providing Neat cement punning.
10
-
-
Providing & Applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.
10
-
-
Providing & Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) :Flush / Ruled / Struck or weathered pointing.
10
-
-
Providing & Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) :Raised and cut pointing
10
-
-
Providing Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:New work (two or more coats) over and including priming coat with cement primer.
10
-
-
Providing Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete as per manufacturer's specification.:Two or more coats on new work.
10
-
-
Applying one coat of cement primer of approved brand and manufacture on wall surface:Cement primer
10
-
-
Providing & Finishing walls with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm).
10
-
-
Providing & Finishing walls with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
10
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm
10
-
-
Providing &Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm).
10
-
-
Providing & Finishing walls with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications :Two or more coats applied @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm.
10
-
-
Providing & Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/ 10 sqm of approved brand or manufacture.
10
-
-
Providing & Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture.
10
-
-
Providing & Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).
10
-
-
Providing & Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.
10
-
-
Providing Painting with silicon & acrylic emulsion base water thinnable seater of approved brand and manufacture on wet or patchy portion of plastered surfaces.One coat.
10
-
-
Providing Painting with silicon & acrylic emulsion base water thinnable seater of approved brand and manufacture on wet or patchy portion of plastered surfaces.Two coat.
10
-
-
Providing & Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work.
10
-
-
Providing & Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work
10
-
-
Providing & Applying two coats of fire retardant paint unthinned on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant.
10
-
-
Providing Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
10
-
-
Providing & Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
10
-
-
Providing & Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
10
-
-
Providing Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work.
10
-
-
Prividing French spirit polishing: Two or more coats on new works including a coat of wood filler
10
-
-
Providing Polishing on wood work with ready mixed wax polish of approved brand and manufacture:New work.
10
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
10
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
10
-
-
6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge.
10
-
-
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement : 4 fine sand).
10
-
-
Providing and fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats.
10
-
-
Providing and fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead : Window chowkhat.
10
-
-
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls,flooring and jambs complete to match existing surface i/c disposal of mulba / rubbish to the nearest municipal dumping ground.For door / window / clerestory window.
10
-
-
Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4mm.
10
-
-
Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 5.5mm.
10
-
-
Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 4mm.
10
-
-
Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 5.5mm.
10
-
-
Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4mm
10
-
-
Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 5.5mm.
10
-
-
Providing and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets.
10
-
-
Refixing old glass panes with putty and nails.
10
-
-
Providing and fixing 25mm thick shutters for cup board etc. :Panelled or panelled & glazed shutters: Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws.
10
-
-
Providing and fixing M.S. round or squre bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows.
10
-
-
Providing and fixing bright finished brass double acting spring hinges with necessary screws etc. complete:150mm.
10
-
-
Providing and fixing bright finished brass double acting spring hinges with necessary screws etc. complete :125mm.
10
-
-
Providing and fixing bright finished brass double acting spring hinges with necessary screws etc. complete:100mm.
10
-
-
Providing and fixing 150mm bright finished floor brass door stopper with rubber cushion, screws etc. to suit shutter thickness complete
10
-
-
Providing and fixing finished brass hard drawn hooks and eyes : 300mm
10
-
-
Providing and fixing bright finished brass hard drawn hooks and eyes : 250 mm
10
-
-
Providing & Fixing finished brass hard drawn hooks and eyes :200mm.
10
-
-
Providing & Fixing finished brass hard drawn hooks and eyes:150mm.
10
-
-
Providing & Fixing finished brass hard drawn hooks and eyes:100mm
10
-
-
Providing & Fixing bright finished brass helical door spring (superior quality).
10
-
-
Providing & Fixing chromium plated brass butt hinges with necessary screws etc. complete.125x70x4mm (ordinary type).
10
-
-
Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in - charge.1:3:6 or richer mix
10
-
-
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
10
-
-
Extra for cutting reinforcement bars manually / by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer - in -charge.
10
-
-
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar.
10
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sq. metres and below.
10
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area beyond 3 sq. metres.
10
-
-
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below.
10
-
-
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
10
-
-
Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of:G.S. Sheet.
10
-
-
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80mm dia pipe.
10
-
-
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100mm dia pipe.
10
-
-
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge:15mm to 40mm nominal bore.
10
-
-
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : Above 40 mm nominal bor
10
-
-
Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually / by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-Charge.
10
-
-
Dismantling of flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
10
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
10
-
-
Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge.
10
-
-
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead,for all leads including all lifts involved.
10
-
-
Painting road surface marking with adequate no. of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc.complete.New work(Two or more coats)
10
-
-
Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests and 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device
10
-
-
Providing & Fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid.
10
-
-
Providing & Fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.l.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
10
-
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mmsizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clampscomplete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern
10
-
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mmsizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clampscomplete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern
10
-
-
Providing & Fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450mm with a pair of 15mm C. P. brass pillar taps.
10
-
-
Providing & Fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450mm with a pair of 15mm C. P. brass pillar taps.
10
-
-
Providing & Fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400mm with a pair of 15mm C.P. brass pillar taps.
10
-
-
Providing & Fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15mm C.P. brass pillar tap.
10
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
10
-
-
Providing & Fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
10
-
-
Providing & Fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board :510x1040mm bowl depth 250mm.
10
-
-
Providing & Fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board :510x1040mm bowl depth 225mm.
10
-
-
Providing & Fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board :510x1040mm bowl depth 200mm.
10
-
-
Providing & Fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board :610x510mm bowl depth 200mm.
10
-
-
Providing & Fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board :610x460mm bowl depth 200mm.
10
-
-
Providing and fixing white vitreous china water closet squatting pan (Indian type): Long pattern W.C. pan of size 580 mm
10
-
-
Providing and fixing white vitreous china water closet squatting pan (Indian type): Orissa pattern W.C. pan of size 580x440 mm
10
-
-
Providing extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440mm.
10
-
-
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
10
-
-
Providing Extra for using coloured pedestal type WC pan (European type) with low level cistern of same colour instead of white vitreous china WC pan and cistern.
10
-
-
Providing & Fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet:250x130x30mm.
10
-
-
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 litre capacity - White
10
-
-
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 litre capacity - coloured
10
-
-
Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete: 10 litre (full flush) capacity-white
10
-
-
Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete: 10 litre (full flush) capacity-coloured
10
-
-
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid
10
-
-
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : Coloured (other than black & white) solid plastic seat with lid
10
-
-
Providing & Fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: Flat back wash basin of size 630x450mm.
10
-
-
Providing & Fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: Flat back wash basin of size 550x400mm.
10
-
-
Providing & Fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete. Flexible pipe: 40mm dia.
10
-
-
Providing & Fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing:Rectangular shape 1500x450mm.
10
-
-
Providing & Fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc., complete.
10
-
-
Providing & Fixing toilet paper holder: C.P. brass.
10
-
-
Providing & Fixing soil, waste and vent pipes: 100mm dia.Centrifugally cast (spun) iron socketed pipe as per IS: 3989.
10
-
-
Providing & Fixing soil, waste and vent pipes: Hubless centrifugally cast (spun) iron pipes epoxy
coated inside & outside IS:15905
10
-
-
Providing & Fixing soil, waste and vent pipes: 75mm diameter:Centrifugally cast (spun) iron socketed pipe as per IS: 3989.
10
-
-
Providing & Fixing soil, waste and vent pipes: 75mm diameter: Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
10
-
-
Providing & Fixing M.S. holder-bat clamps of approved design to Sand Cast Iron / Cast Iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :For 75mm dia. Pipe.
10
-
-
Providing & Fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete100mm:Sand cast iron S&S as per IS - 1729.
10
-
-
Providing & Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 12.5mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :100mm dia.
10
-
-
Providing & Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 12.5mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :75mm dia.
10
-
-
Providing & Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 12.5mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :50mm dia.
10
-
-
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 100 mm diameter pipe
10
-
-
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 75 mm diameter pipe
10
-
-
Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 100 mm diameter pipe
10
-
-
Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 75 mm diameter pipe
10
-
-
Providing & Fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat lid with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fittings and brackets, 40mm flush bend 20mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.
10
-
-
Providing & Fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms.
10
-
-
Providing & Fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
10
-
-
Providing & Fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.
10
-
-
Providing & Fixing PTMT shelf 440mm long, 124mm width and 36mm height of approved quality and colour, weighing not less than 300 gms.
10
-
-
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing& fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), includingseat cover, and cistern fittings, nuts, bolts and gasket etc complete.
10
-
-
Providing & fixing white vitreous china water less urinal of size 600 x330 x 315 mm having antibacterial /germs free ceramic surface,fixed with cartridge having debris catcher and hygiene seal.
10
-
-
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
10
-
-
Providing & Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.:15mm nominal outer dia. pipes.
10
-
-
Providing & Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.:20mm nominal outer dia. pipes.
10
-
-
Providing & Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.:25mm nominal outer dia. pipes.
10
-
-
Providing & Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.:32mm nominal outer dia. pipes.
10
-
-
Providing & Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.:40mm nominal outer dia. pipes.
10
-
-
Providing & Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.:50mm nominal outer dia. pipes.
10
-
-
Providing & Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.:15mm nominal outer dia. pipes.
10
-
-
Providing & Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.:20mm nominal outer dia. pipes.
10
-
-
Providing & Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.:25mm nominal outer dia. pipes.
10
-
-
Providing & Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.:32mm nominal outer dia. pipes.
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 15 mm dia. nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 20 mm dia. nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 25 mm dia. nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 32 mm dia. nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 40 mm dia. nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 50 mm dia. nominal bore
10
-
-
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps i/c making good the walls etc. concealed pipe including painting with anticorrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore
10
-
-
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps i/c making good the walls etc. concealed pipe including painting with anticorrosive bitumastic paint, cutting chases and making good the wall 20 mm dia nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia. nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia. nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia. nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 32 mm dia. nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 40 mm dia. nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia. nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 65 mm dia. nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia. nominal bore
10
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore
10
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore
10
-
-
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
10
-
-
Providing and fixing brass bib cock of approved quality : 20 mm nominal bore
10
-
-
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
10
-
-
Providing and fixing brass stop cock of approved quality : 20 mm nominal bore
10
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore
10
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore
10
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
10
-
-
Providing & Fixing gun metal non-return valve of approved quality (screwed end) : 25mm nominal bore Horizontal
10
-
-
Providing & Fixing gun metal non-return valve of approved quality (screwed end) : 25mm nominal bore Vertical
10
-
-
Providing & Fixing gun metal non-return valve of approved quality (screwed end) : 32mm nominal bore Horizontal
10
-
-
Providing & Fixing gun metal non-return valve of approved quality (screwed end) : 32mm nominal bore Vertical
10
-
-
Providing & Fixing gun metal non-return valve of approved quality (screwed end) : 40mm nominal bore Horizontal.
10
-
-
Providing & Fixing gun metal non-return valve of approved quality (screwed end) : 40mm nominal bore Vertical.
10
-
-
Providing & Fixing gun metal non-return valve of approved quality (screwed end) : 50mm nominal bore Horizontal .
10
-
-
Providing & Fixing gun metal non-return valve of approved quality (screwed end) : 50mm nominal bore Vertical.
10
-
-
Providing & Fixing gun metal non-return valve of approved quality (screwed end) : 65mm nominal bore Horizontal.
10
-
-
Providing & Fixing gun metal non-return valve of approved quality (screwed end) : 65mm nominal bore Vertical.
10
-
-
Providing & Fixing gun metal non-return valve of approved quality (screwed end) :80mm nominal bore Horizontal.
10
-
-
Providing & Fixing gun metal non-return valve of approved quality (screwed end) :80mm nominal bore Vertical
10
-
-
Providing & Fixing uplasticised PVC connection pipe with brass unions: 45cm length 15mm nominal bore.
10
-
-
Providing & Fixing C.P. brass shower rose with 15 or 20mm inlet:100mm diameter.
10
-
-
Providing & Fixing C.P. brass shower rose with 15 or 20mm inlet:150mm diameter.
10
-
-
Constructing masonry chamber 90x90x100cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1: 3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :With F.P.S. bricks.
10
-
-
Providing & Fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15mm nominal bore.
10
-
-
Providing & Fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 20mm nominal bore.
10
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 25 mm nominal bore
10
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 32 mm nominal
10
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 40 mm nominal bore
10
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 50mm nominal bore
10
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 65mm nominal bore
10
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 80 mm nominal bore
10
-
-
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore.
10
-
-
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore.
10
-
-
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore.
10
-
-
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 32 mm nominal bore.
10
-
-
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 40 mm nominal bore.
10
-
-
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 50 mm nominal bore.
10
-
-
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 65 mm nominal bore.
10
-
-
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 80 mm nominal bore.
10
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
10
-
-
Providing & Fixing C.P. brass bib cock of approved quality conforming to IS:8931 15mm nominal bore.
10
-
-
Providing & Fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15mm nominal bore.
10
-
-
Providing & Fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore.
10
-
-
Providing & Fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15mm nominal bore.
10
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore.
10
-
-
Providing & Fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately):50mm dia.
10
-
-
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 80 mm dia
10
-
-
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 100 mm dia
10
-
-
Providing & Fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P. / H.P.H.D. plastic ball. 15mm nominal bore, 105mm long, weighing not less than 138 gms.
10
-
-
Providing & Fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P. / H.P.H.D. plastic ball.20mm nominal bore, 120mm long, weighing not less than 198 gms.
10
-
-
Providing & Fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P. / H.P.H.D. plastic ball.25mm nominal bore, 152mm long, weighing not less than 440 gms.
10
-
-
Providing & Fixing PTMT Soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
10
-
-
Cutting holes up to 30x30cm in walls including making good the same:With F.P.S. bricks.
10
-
-
Providing & Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including finishing complete so as to make it leak proof.
10
-
-
Providing & Making chases up to 7.5x7.5cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
10
-
-
Providing & Making hole up to 20x20cm and embedding pipes up to 150mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20mm nominal size) including disposal of malba.
10
-
-
Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site lead up to 50 metre: 80mm diameter C.I. pipes.
10
-
-
Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site lead upto 50 metre: 100 mm diameter C.I. pipe
10
-
-
Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology: 15 mm nominal bore.
10
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80cm and 45cm deep including C.I. cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg):With F.P.S. bricks with class designation 75.
10
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:Inside size 120x90cm and 90cm deep including C.I. cover with frame (medium duty) 500mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :With F.P.S. bricks class designation 75.
10
-
-
Extra for depth for manholes :Size 90x80cm:With F.P.S. bricks class designation 75.
10
-
-
Extra for depth for manholes :Size 120x90cm:With F.P.S. bricks class designation 75.
10
-
-
Fixing C.I. cover without frame for manholes: 455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.
10
-
-
Fixing C.I. cover without frame for manholes: 500mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg.
10
-
-
Fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D - 2.5 :Rectangular shape 600x450mm internal dimensions.
10
-
-
Fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D - 2.5 :Square shape 450mm internal dimensions.
10
-
-
Fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D - 2.5 :Circular shape 450mm internal diameter.
10
-
-
Fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality M D -10 :Square shape 450mm internal dimension.
10
-
-
Fixing C.I. cover 300x300mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg.
10
-
-
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : Rectangular manhole 90x80cm with rectangular cover 600x450mm of grade LD - 2.5.
10
-
-
Constructing brick masonry road gully chamber 50x45x60cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :With F.P.S. bricks.
10
-
-
Providing and fixing Fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing and panelling to be paid for separately): For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
10
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing and panelling to be paid for separately): For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron).
10
-
-
For shutters of doors, windows & ventilators including fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron).
10
-
-
Fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
10
-
-
Fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-Charge.Pre-laminated particle board with decorative lamination on both sides.
10
-
-
Fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0mm thickness.
10
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50mm thickness.
10
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-Charge.With stainless steel cover plate.
10
-
-
Filling the gap in between aluminium frame & adjacent RCC / Brick / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete.Upto 5mm depth and 5mm width.
10
-
-
Fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-Charge complete.205 X 19mm.
10
-
-
Fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-Charge complete.255 X 19mm.
10
-
-
ixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-Charge complete.355 X 19mm.
10
-
-
Fixing aluminium tubular handle bar 32mm outer dia, 3.0mm thick & 2100mm long with SS screws etc .complete as per direction of Engineer-in-Charge.Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar.
10
-
-
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
10
-
-
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Polyester powder coated minimum thickness 50 micron aluminium.
10
-
-
Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-Charge. Polyester powder coated minimum thickness 50 micron aluminium.
10
-
-
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
10
-
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
10
-
-
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 : Upto 5 mm depth and 5 mm width
10
-
-
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 : Upto 10 mm depth and 10 mm width
10
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
10
-
-
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar(which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.
10
-
-
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
10
-
-
Grading roof for water proofing treatment with Cement mortar 1:3 (1 cement : 3 coarse sand.)
10
-
-
Dismantling existing toilets complete till the bare slab including dismantling the fittings like GI pipes etc., tiles, counters including the disposal of malba all complete as directed by Engineer-in-Charge. (Floor of toilet to be measured )
10
-
-
Removing the old grills from press steel window frames and resizing the same by providing / cutting additional bars / flats as per the size of new wooden frames, as directed by EIC.
10
-
-
Removing the existing carpet/PVC flooring cleaning the surface etc as directed.
10
-
-
Dismantling wooden flooring including cleaning the surface and making good for fixing new wooden flooring as directed.
10
-
-
Refixing ceramic glazed wall tiles 12mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry
10
-
-
Providing and fixing china Water closet with ‘P’ or ‘S’ trap, matching colour plastic seat (heavy quality) and dual flushing cistern with internal fittings etc. cuttings holes in walls, floors and making good. All complete as per drawing, approval and instructions of the EIC White colour ( Hindware or Equivalent)
10
-
-
Providing and fixing first quality plastic seat cover with lid & hinges ( Hindware or Equivalent) for Wall hung constellation W.C.All complete as per drawing, approval and instructions of the Engineer-in-charge.
10
-
-
Providing and fixing brass hinges for W.C seat cover
10
-
-
Providing and fixing dual flushing cistern fittings ( Hindware or Euivalent) All complete as per drawing, approval and instructions of the Engineer-in-charge.
10
-
-
Providing fixing and making operational CP brass Angle Valve Jaquar or Euivalent make
10
-
-
Providing fixing and making operational CP brass bib Cock Jaquar or Euivalent make
10
-
-
Providing fixing and making operational CP brass Long Body bib Cock Jaquar or Euivalent make
10
-
-
Providing fixing and making operational CP brass twoway bib cock Jaquar or Euivalent make
10
-
-
Providing fixing and making operational CP brass pillar cock Jaquar or Euivalent make
10
-
-
Providing fixing and making operational CP brass pillar cock long Neck with Aerator Jaquar or Euivalent make
10
-
-
Providing fixing and making operational CP brass Concealed Stop Cock, Extra Heavy Body Jaquar or Euivalent make
10
-
-
Providing fixing and making operational CP brass Central Hole Basin Mixer without Popup Jaquar or Euivalent make
10
-
-
Providing fixing and making operational CP brass Sink Mixer with Raised ‘J’ Shaped Swinging Spout Jaquar or Euivalent make
10
-
-
Providing fixing and making operational CP brass Shower Arm 190mm Long Heavy cat no 483 and Overhead shower Jaquar or Euivalent make
10
-
-
Providing fixing Single Towel Rail 600mm Long Jaquar or Euivalent make
10
-
-
Providing fixing Single Towel Ring Square Jaquar or Euivalent make
10
-
-
Providing fixing Soap Dish Holder Jaquar or Euivalent make
10
-
-
Providing fixing Soap Dispenser with Metallic Bottle Jaquar or Euivalent make
10
-
-
Providing fixing Tumbler Holder Jaquar or Euivalent make
10
-
-
Providing fixing Double Coat Hook Jaquar or Euivalent make
10
-
-
Providing fixing Towel Rack 600mm Long with Lower Hangers Jaquar or Euivalent make
10
-
-
Providing fixing Waste Coupling 32mm Size Half Thread Jaquar or Euivalent make
10
-
-
Providing fixing Handshower (Health Faucet) with 1meter Flexible Tube with Wall Hook Jaquar or Euivalent make
10
-
-
Providing fixing Bottle Trap (with internal partition) 32mm Size Jaquar or Euivalent make
10
-
-
Providing and fixing CP cockroach trap heavy duty of approved make Jaquar or Euivalent make
10
-
-
Providing and fixing Copper pipe in geyser of approved as directed including nuts & bolts
10
-
-
Providing and fixing liquid soap dispenser Jaquar or equivalent, All as per instruction of EIC.
10
-
-
Providing and fixing tissue dispenser complete including cutting and making good the walls wherever required. AVRO make or approved equivalent make)
10
-
-
Providing and fixing CP brass jet spray with flexible pipe fitted to EWC.
10
-
-
Providing and fixing rigid PVC pipe 75 mm dia for disposal of water from urinal and wash basin complete.
10
-
-
Providing and fixing rigid PVC bends/elbow 40 mm dia with necessary solvent complete.
10
-
-
Providing and fixing rigid PVC TEE 40 mm dia with necessary solvent complete.
10
-
-
Providing and fixing CP brass flush (long) bend 32mm dia as directed by EIC
10
-
-
Providing and fixing CP brass extension piece 15mm dia as directed by EIC.
10
-
-
Providing and fixing acrylic shelf of approved quality, size and shade.
10
-
-
Providing and fixing Glass shelf of approved quality for wash basin of size 20"x5" Approx.
10
-
-
Providing and fixing the designer fiber glass plane 2 mm thick sheet roofing of best make with GI, J and L hooks, bolts and nuts 8 mm dia GI plane and bitumen washers all complete excluding the cost of purlines, rafters and trusses, up to 60 degree pitch.
10
-
-
Providing and fixing 6mm thick commercial ply Green, Duro, century, Sonear or equiavalent make with fully threaded parallel shank screws or headless nails. All as per drawing, approval and instructions of the Engineer-in-charge.
10
-
-
Providing and fixing 12mm thick commercial ply Green, Duro, century, Sonear or equiavalent make with fully threaded parallel shank screws or headless nails. All as per drawing, approval and instructions of the Engineer-in-charge.
10
-
-
Providing and fixing 19mm thick commercial ply Green, Duro, century, Sonear or equiavalent make with fully threaded parallel shank screws or headless nails. All as per drawing, approval and instructions of the Engineer-in-charge.
10
-
-
Providing & fixing 12 mm thick MDF board ASIS or equailant make with nails, adhesive etc including making grooves etc.
10
-
-
Providing & fixing 8 mm thick MDF board ASIS or equailant make with nails, adhesive etc including making grooves etc.
10
-
-
Providing & fixing 3.5mm thick Natural Decorative Veneer Ply - White ash / steam beach. or equivalent to curved / straight partition / paneling of group match and of following origin, making grooves, All as per drawing, approval and instruction of EIC.
10
-
-
Providing & fixing 3.5mm thick Natural Decorative Veneer Ply - Teak veneer. or equivalent to curved / straight partition / paneling of group match and of following origin, making grooves, All as per drawing, approval and instruction of EIC.
10
-
-
Providing and fixing under counter 600 mm deep, height and length as per site requirement, made of 19 mm thick board, back shall be 12 mm thick BWP ply. Openable shutter shall be provided in front of counter, all exposed sides and shutter of cabinet & inside the cabinet finished with 1 mm thick laminate of greenlam or equivalent i/c MP Godrej lock, Telescopic channel,brass/SS handles 100 mm, hinges, magnetic chatcher of approved quality.All edges of board shall be sealed with wooden leaping of 6 mm x 20 mm as directed by EIC.(payment shall be made as per front area of cabinet)
10
-
-
Providing and fixing cabinet, 400 mm deep, height and length as per site requirement made of 19 mm thick commercial board ( Duro/Century/Donear or equivalent), with open able shutter, all shelving shall be loose and adjustable. Back shall be 12 mm thick. All exposed sides, shutter, and bottom side of cabinet & inside the cabinet finished with 1.00 mm thick laminate of greenlam or equivalent approved class. (Payment shall be made as per front area of the cabinet)
10
-
-
Providing and fixing double skin partition with matching 1.0 mm thick Greenlam or equinalent Laminate on both sides and frame work of hard wood (Kailwood) 48x48 mm @ 60 cm c/c bothway and 12 mm thick commercial ply (Duro/Century/Donear or equivalent)
10
-
-
Providing and fixing louver frame and shutters of Teakwood / white ash wood with polished in melamine with necessary hinges as per drawing and instruction of EIC
10
-
-
Skilled Labour charges for providing plumbing, carpentry and other services related to Civil maintenance of residential complex, Noida, Oil House and guest houses with all tools including sundries materials like nails, fevicols, chemicals, screws etc.
10
-
-
Un Skilled Labour charges for Helping plumbing, carpentry and other services related to Civil maintenance of residential complex, Noida, Oil House and guest houses with all tools including sundries materials like nails, fevicols, chemicals, screws etc
10
-
-
Providing and fixing 12 mm thick perforated ceiling tiles of approved make including anti termite / fire retardant treatment with removal of existing damaged tiles, if required.
10
-
-
Easing of door/windows / drawers etc. edges for proper closing/ opening of shutter drawer etc complete.
10
-
-
Repairing and refixing of door/window shutters including removal of shutter from chowkats, cutting wherever necessary, removing and refixing butt hinges on other side of frame and shutter wherever required.
10
-
-
Repairing of European type W.C. cistern by removing/repositioning the internal fittings after replacing rubber gasket.
10
-
-
Providing and fixing G.I. pipe fittings heavy duty (ISI mark) - 15mm dia socket
10
-
-
Providing and fixing G.I. pipe fittings heavy duty (ISI mark) - 15mm dia elbow
10
-
-
Providing and fixing G.I. pipe fittings heavy duty (ISI mark) - 15mm dia Tee
10
-
-
Providing and fixing G.I. pipe fittings heavy duty (ISI mark) - 20mm dia Socket
10
-
-
Providing and fixing G.I. pipe fittings heavy duty (ISI mark) - 20mm dia Elbow
10
-
-
Providing and fixing G.I. pipe fittings heavy duty (ISI mark) - 20mm dia Tee
10
-
-
Providing and fixing G.I. pipe fittings heavy duty (ISI mark) - 25mm dia Socket
10
-
-
Providing and fixing G.I. pipe fittings heavy duty (ISI mark) - 25mm dia Elbow
10
-
-
Providing and fixing G.I. pipe fittings heavy duty (ISI mark) - 25mm dia Tee
10
-
-
Providing and fixing 40mm piston Set at W.C flush Valve
10
-
-
Providing and fixing 40mm MFV body nut at W.C flush Valve
10
-
-
Providing and fixing 40mm MFV seal washer at W.C flush Valve
10
-
-
Providing and fixing 40mm MVF gland nut at W.C flush Valve
10
-
-
Providing and fixing 40mm seal washer at W.C flush Valve
10
-
-
Providing and fixing 40mm MVF Bottom at W.C flush Valve
10
-
-
Providing and fixing 40mm dia. cover plate at W.C flush Valve
10
-
-
Providing and fixing 32mm dia.300mm long brass bottol tap pipe
10
-
-
Providing and fixing 32mm dia.230mm long brass bottol tap pipe
10
-
-
Providing and fixing 32mm dia.150mm long brass bottol tap pipe
10
-
-
Cleaning of G.I./M.S./Masonery/PVC over head tanks of 500 litres capacity / sizes (approximate) including removal of malba outside premises and disinfecting with bleaching power etc complete.
10
-
-
Cleaning of G.I./M.S./Masonery/PVC over head tanks of 1000 litres capacity / sizes (approximate) including removal of malba outside premise and disinfecting with bleaching power etc complete.
10
-
-
Replacement of 3mm thick acrylic sheet of white colour on existing board and lettering the same as per requirement.
10
-
-
Cleaning the sewage line from one manhole to next manhole including both the manholes and disposal of malba from the premises.
10
-
-
Providind and fixing Wall Paper of approved make with adhesive complete as directed by EIC.
12.5
-
-
Providing and fixing in position 9 mm thick Pergo expression laminated floor (code 010012) or of approved equivalent make with sound block, of plank having proloc joints tongue and groove to secure long lasting joints, as per approval by EIC.
12.5
-
-
Providing and fixing vertical blinds of 100mm width of Vista levelor or equivalent make in the range of Classic / Select coated with dust guard as directed by EIC.
12.5
-
-
Providing and fixing vertical blinds of 75mm width of Vista levelor or equivalent make in the range of Classic / Select coated with dust guard as directed by EIC.
12.5
-
-
Providing and fixing roller blinds of approved design/make and shade including all standard fittings as per manufacturer's specification.
12.5
-
-
Providing and fixing wall panelling with matching 1.0 mm thick Laminate (Greenlam or equivalent ) on one sides and frame work of hard wood (Kailwood) 48x38 mm @ 60 cm c/c bothway and 12 mm thick commercial ply (Duro/Century/Donear or equivalent) -
12.5
-
-
Providing and Fixing brass Mortice Lock - 6 lever with handle complete Godrej or Equivalent make
12.5
-
-
Providing and fixing 8.00mm thick plain glass including teak wood/ steam beach wood moulding in door /window / partition etc. by removing old broken glass pane., old putty/beading. Rate to include rounding / grinding of edges & making bevelled edges for table top polishing.
10
-
-
Providing and fixing 10.00mm thick plain glass including teak wood/ steam beach wood moulding in door /window / partition etc. by removing old broken glass pane., old putty/beading. Rate to include rounding / grinding of edges & making bevelled edges for table top polishing.
10
-
-
Providing and fixing 12.00mm thick plain glass including teak wood/ steam beach wood moulding in door /window / partition etc. by removing old broken glass pane., old putty/beading. Rate to include rounding / grinding of edges & making bevelled edges for table top polishing.
10
-
-
Repairing of steel window by welding / strength and greasing with replacement of hinges
10
-
-
P/L sun control film of approved shade and colour
10
-
-
Repair of floor trap with chemical water proofing treatment complete in all respects as per manufactures' specification
10
-
-
Providing and fixing and replacement of complete PVC syphon for low level PVC cistern heavy duty approved make
10
-
-
Clearing air lock in GI lines per flat by pumping water from the outside
10
-
-
Providing and fixing of 12mm MDF with fabric of desired colour customised to the requirement as directed by EIC.
10
-
-
Providing and fixing loop carpets for the floor of approved design / make and shade including all standard fittings as per manufacturer's specification.
10
-
-
Providing and fixing large cylindrical mortice locks with long handles as directed by EIC.
10
-
-
Providing and fixing hydroulic cylinder at chair
10
-
-
Providing and fixing pin type chair wheel at chair
10
-
-
Supplying and Wiring for circuit/ submain wiring alongwith earth wire of sizes FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
10
-
-
Supplying and Wiring for circuit/ submain wiring alongwith earth wire of sizes FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
10
-
-
Supplying and Wiring for circuit/ submain wiring alongwith earth wire of sizes FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 10 sq. mm + 1 X 10 sq. mm earth wire
10
-
-
Supplying and Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2x1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano/modular type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
10
-
-
Supplying and drawing size of FRLC PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. Size - 2 x 1.5 sq. mm
10
-
-
Supplying and drawing following pair 0.5 mm dia FRLS PVCinsulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required : 4 Pair
10
-
-
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
10
-
-
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same
in case of recessed conduit as required : 20 mm
10
-
-
Supplying and fixing 5/6 amps piano type switch/socket on the existing switch box/ cover including connections etc. as required.
10
-
-
Supplying and fixing 2 way 5/6 amps piano type switch/socket on the existing switch box/ cover including connections etc. as required.
10
-
-
Supplying and fixing 15/16 amp piano type switch/socket on the existing switch box/ cover including connections etc. as required.
10
-
-
Supplying and fixing 3 pin 5/6 amp outlet piano type socket on the existing switch box/ cover including connections etc. as required.
10
-
-
Supplying and fixing 3 pin 15/16 piano type socket on the existing switch box/ cover including connections etc. as required.
10
-
-
Supplying and fixing Telephone socket on the existing switch box/ cover including connections etc. as required.
10
-
-
Supplying and fixing TV antenna socket on the existing switch box/ cover including connections etc. as required.
10
-
-
Supplying and fixing Bell push on the existing switch box/ cover including connections etc. as required.
10
-
-
Supplying and fixing modular 5/6 switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
10
-
-
Supplying and fixing modular 15/16 switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
10
-
-
Supplying and fixing modular 3 pin 5/6 amp socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
10
-
-
Supplying and fixing modular 3 pin 15/16 amp socket outleton the existing modular plate & switch box including connections but excluding modular plate etc. as required.
10
-
-
Supplying and fixing modular Bell push on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
10
-
-
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
10
-
-
Supplying and fixing 3 pin, 5A ceiling rose on the existing junction box/ wooden block including connection etc as required.
10
-
-
Supplying and fixing /bakelite brass/batten/angle/ pandent holder including connection etc. as required.
10
-
-
Erection of wall bracket light/ceiling light fittings and fixing of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required.
10
-
-
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
10
-
-
Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FR PVC insulated, copper cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.
10
-
-
Installation only, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
10
-
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
10
-
-
Installation of exhaust fan Upto 450 mm sweep in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
10
-
-
Supplying and fixing Single pole 5 amps to 32 amps rating, 240/415 volts, miniature circuit breaker suitable for inductive load of poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
10
-
-
Supplying and fixing Double pole 5 amps to 32 amps rating, 240/415 volts, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
10
-
-
Supplying and fixing Triple pole and neutral 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
10
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
10
-
-
Supplying and fixing 40 amps rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
10
-
-
Supplying and fixing 63 amps rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
10
-
-
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required : 40A
10
-
-
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required : 63A
10
-
-
Supplying and fixing plastic gang box for single 5A switch and socket
10
-
-
Supplying and fixing plastic gang box for two 5A switch and socket
10
-
-
Supplying and fixing plastic gang box for single 15A switch and socket
10
-
-
Supplying and fixing 4 way MCB distribution box with metal door
10
-
-
Supplying and fixing 8 way MCB distribution box with metal door
10
-
-
Supplying and fixing 75mm / 100mm dia wooden / PVC round blocks onceiling/walls etc.
10
-
-
Supplying and fixing Tube Light D Super 80 Linear Fluorescent tube 36 watts 4' long
10
-
-
Supplying and fixing Tube Light D Super 80 Linear Fluorescent tube18watts 2' long
10
-
-
Supplying and fixing Copper Ballast 18/36 watts
10
-
-
Supplying and fixing Starter 18/36 watts 220/240 volt
10
-
-
Rewinding including supply of materials of ceiling/exhaust fans all types all diameters and sweeps, complete including taking out and reinstallation of fan.
10
-
-
Oiling and greesing of all type of fans including taking out & reinstallation including supply of necessary materials.
10
-
-
Supplying and fixing bush for ceiling fans/exhaust fans including removal of fan and refixing the same.
10
-
-
Dismantling & refixing of existing fan & light fixtures.
10
-
-
Supplying and fixing of 11 W, Normal CFL lamps
10
-
-
Supplying and fixing of 15 W, Normal CFL lamps
10
-
-
Supplying and fixing of 18 W, Normal CFL lamps
10
-
-
Supplying and fixing 3 PIN PLUG TOP 6 A
10
-
-
Supplying and fixing 3 PIN PLUG TOP 16 A
10
-
-
Supplying and fixing CFL, 4W to 36W , 4PIN
10
-
-
Supplying and fixing CFL 11W, 14W and 18W Choke
10
-
-
Supplying, laying, testing and commissioning of 1100V Grade, PVC Armored AL. Cable, Size :3.5C X 50 sq. mm
10
-
-
Supplying, laying, testing and commissioning of 1100V Grade, PVC Armored AL. Cable , Size :3.5C X 95 sq.mm
10
-
-
Supplying and fixing Metal Clad Plug 20A
10
-
-
Supplying and fixing Socket for Metal Clad Plug 20A
10
-
-
Providing and fixing Combined box with 15 Amp Swith and Socket including connection
10
-
-
Providing and fixing Modular type Regulator for ceiling fan including connection
10
-
-
Supplying & repairing of 15/25 ltrs. Storage type Geyser, 2 KW with all materials as reuired.
10
-
-
Supplying & repairing of 15/25 lts. Storage type geyser, 2KW with Geyser Heating Coil 2KW as required.
10
-
-
Supplying & repairing of 15/25 lts. Storage type geyser, 2KW with Geyser Thermostate as required.
10
-
-
Supplying and fixing LED Tube Light 20 watts,Maxoled (tube) 4' long
10
-
-
Supplying & fixing mirror optic 40w fitting surface 600mmx600mm cool white
10
-
-
Supplying & fixing 10w ceiling concealed warm/cool light
10
-
-
Supplying & fixing 6W led Luman Plus light Havells or equivalent make
10
-
-
Supplying & fixing 9W led Luman Plus light Havells or equivalent make
10
-
-
Supplying & fixing 11W led Luman Plus light Havells or equivalent make
10
-
-
Supply & Laying Net cable Dlink Cat6 copper conductor PE insulated, shielded with fine tinned copper braid protected with PVC sheath
10
-
-
Supply & Fixing Dlink RJ 45 Connector for Net cable
10
-
-
Supply & Fixing I/O Plate for Net cable
10
-
-
Supply & Fixing I/O Connector for Net cable
10
-
-
Supply and installation 400mm pedestal fan stand (White)with 3 nos blade oscilator type make Crompton,UshaHavells or equivalent.
10
-
-
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements