Directorate General Defence Estates Tender

S/F of framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted ,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; for portions framed and hung as gates, including lintle hinges, stops, hand-made sliding bolts, etc. and similar work con- forming to Fe.290.Gde-E-165 including priming and painting

Providing and fixing of 'Unistone' or equivalent Glass Reinforced Concrete (G.R.C) wall cladding tiles in approved design, size, texture, thickness, pattern and color, thickness of the tiles should range between 12 to 18 mm (depending on the texture of the tile), allowing variance of +2 mm in accordance with IS: 1237-1980. The composition of tiles should be '43' grade white portland cement reinforced with Alkali Resistant Glass Fiber and the pigmentation should be done with exterior grade synthetic inorganic iron oxide pigments manufactured by 'BAYFERROX (Gernmany) or equivalent. The pigmentation should be homogeneous and in accordance with british Standards BS EN 12878 : 1999. The other additives should be fine washed graded quartz, super plasticizers and integrated water proofing agents and others. The tiles should be produced with high vibration technology and should have compressive strength equivalent to M-40Grade@28 days. The top surface of the tiles should be sealed with acrylic lacquer resulting in surface water absorption of tiles, less then 1% and water absorption by 24 hrs immersion method, less than 8% the tiles should be applied on a rough plaster of cement mortar 1:3 (1 cement : 3 course sand) and the fixing of tiles should be done by 'Unistone' tile adhesive or equivalent as per manufacturerer's laying instruction. As per direction of Engineer-in-charge.

12 mm thick Plaster in cement mortar in 1:4 Cement Mortar with priming and 2 coat synthetic enamel

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (Wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fatteners etc.) As per direction of Engineer-In-Charge.e

Providing & fixing of Diamond Fences consist overall Dimensions: 1030mm (Height)X900mm (Length) X50mm (thickness) & Manufacture with M-30 grade of concrete using vibro-compaction process using jointless FRP moulds so as to achieve shuttering finish & Suitably reinforced to promote long use and to prevent damage during handling, transportation & erection. Complete as per direction of Engineer-in-Charge.

Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminum composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminum composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. including the fastening brackets of Aluminum alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminum composite panel cladding, cleaning and protection of the curtain wall with aluminum composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminum items The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding.

Providing and fixing concertina coil fencing with punched tape concertina coil 600mm dia 10 meter openable length (total length 90m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal RBT reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (RBT)/Spring core (2.5mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52mm thick) and weight 43.478 gm/meter including Brackets and other associate items

Supply and fixing of FRP animal design dustbin of capacity of 45 ltr garbage storage.

Supply and Placing of Dates Tree (Khajoor Ped) for decoration of the Parks and other place.

Supply and placing of of Floral and ornate three seater bench with cast iron sides and double floral back as per design with each side suitably casted ,dise grinded and pin grinded for smooth surface finish with proper removal of casting flushes each side having suitable Nos of holes of size 10 mm drilled at inner seating ends.Each bench side suitably spray premiered dried, and subsequently spray painted with premium quality hi gloss enamel Paint. overll length of bench should be 67" and ht. 33". Item Code-CBK A9

Supply,fixing, testing and commisioning of LED colour Rope light of color as decided by Eng-in-Charge.(In any colour multicolour or single colour) having length 18 mtr each for wrapping around poles,trees etc with 72 LEDs/mtr, 240 V 50 HZ with transperent silicon coating of dimension 1800x11.5x6.5 mm with plug and play SKU make Philips,Havels,Crompton or Equivalent.

Supply, fixing, testing and commisioning of LED Focus light of 50 W with lumen out put 5000 Lm with CRI70 of inbuilt surge 4 KV having voltage band 140-277V/50 Hz having power factor0.9 with IP ratings IP 65 or lk rating IK 07 of make Heavells, Bajaj, Philips, Cropmton or Equivalent, Body Made up of Die cast Aluminium with Toughened Glass. With higly reliable Component used in LED driver, Temperature Component in driver with in permissible limit and efficiency 80%. Design as approved By Engg-In-Charge.