Department Of Revenue Tender

White washing with lime to given an even shade: Work (two or more coats)

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595X595 m of approved texture, design and patterns as per CPWD Specification 2019 to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main -T runners of size 24x38 mm of length 3000 mm , cross -T of size 24X 32 mm of length 1200 mm and secondary intermediate cross -T of size 24x32 mm of length 600mm to form grid module of size 600x600mm , Suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners , 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm Thick with precut hole on both 25 flange to pierce into 12X50 mm or even bigger size dash fastener if require , fixed with Galvanized iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S. screws . The work shall be carried out as per specification , drawing and as per direction of the Engineer – in- charge . With 15 mm thick Tegular edged light weight calcium silicate false ceiling tiles sqm.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections and other sections of approved make conforming to IS: 733 and IS : 1285 , fixing with dash fasteners of required dia and size , including necessary filling up the gaps at junctions , i.e at top , bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminum ections shall be smooth , rust free straight , mitred and jointed mechanically wherever required including cleat angle , Aluminium snap beading for glazing / paneling , CP brass / stainless steel screws , all complete as per architectural drawing and the directions of Engineer-in-charge .( Glazing , paneling and dash fasteners to be paid for separately. For Fixed portion- Anodised aluminium ( anodized transparent ordyed to required shade according to IS : 1868 , Minimum anodic coating of grade AC 15)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections and other sections of approved make conforming to IS: 733 and IS : 1285 , fixing with dash fasteners of required dia and size , including necessary filling up the gaps at junctions , i.e at top , bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminum ections shall be smooth , rust free straight , mitred and jointed mechanically wherever required including cleat angle , Aluminium snap beading for glazing / paneling , CP brass / stainless steel screws , all complete as per architectural drawing and the directions of Engineer-in-charge .( Glazing , paneling and dash fasteners to be paid for separately. For shutters of doors,- windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised .

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade I Type II , in paneling fixed in aluminium doors, windows shutters and partition frames with CP brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- incharge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing ISI marked flush door shutters conforming to IS :2022 (Part-1) decorative of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters . 30 mm thick including ISI marked stainless steel butt hinges with necessary screw

Providing and fixing glazing in aluminium door, window, ventilators shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item: With float glass panes of 5 mm thickness (weight not less than 12.50 kg/Sqm)