Chief Engineer Aligarh Zone PWD Aligarh Superintending Engineer Aligarh Circle PWD Aligarh Construction Division Building PWD Aligarh Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Chief Engineer Aligarh Zone PWD Aligarh Superintending Engineer Aligarh Circle PWD Aligarh Construction Division Building PWD Aligarh Tender
Civil And Construction
Building Construction
Real Estate Service
Eprocure
Opening Date10 Feb 2025
Closing Date10 Mar 2025
Tender Amount₹ 4,76,04,881
Technical
Technical
Financial
Class Of Bidder
... View More
Category A
Technical Capacity
... View More
The bidder should have a minimum prior work experience as evidenced by the financial reports for the last five years. The bidder should have satisfactorily completed works in the last 7 years, with specific requirements for similar works completed, including:
- Three similar completed works each costing not less than Rs 1.90 Crores (40% of estimated cost)
- OR - Two similar completed works each costing not less than Rs 2.85 Crores (60% of estimated cost)
- OR - One similar completed work each costing not less than Rs 3.80 Crores (80% of estimated cost) The bidder should also have had an average annual financial turnover (gross) of Rs 1.90 Crores on construction works during the last five consecutive years, with a minimum average annual turnover worth 40% of the estimated cost. The value of executed works should be brought to the current costing level by enhancing the actual value of work done at a simple rate of 10% per annum. The bidder should provide information on similar works completed, including the value and percentage of such works, but specific percentages are not mentioned except for the 10% increase in the value of completed works to bring it to the current costing level.
Costs
EMD
₹ 9,52,000Document Cost
₹ 2,354Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEALG_1003791_1Tender No
947/Cashier-A.C./2025Tender Authority
Chief Engineer Aligarh Zone PWD Aligarh Superintending Engineer Aligarh Circle PWD Aligarh Construction Division Building PWD Aligarh ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.
824.81
189
155889.09
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
72.7
1546
112394.2
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources.
135.45
4959
671696.55
... More
Making drain along with the apron.
128.63
702
90298.26
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement:2 coarse sand) to match the existing floor.With Chlorpyriphos/ Linadane E.C. 20% with 1% concentration.
678.88
225
152748
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources.[R.C.C. WORK IN FOOTING, COLUMN & TIE BEAM ]
261.01
6586
1719011.86
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
51.97
5192
269828.24
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)
52.84
299
15799.16
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
52.84
106
5601.04
... More
Thermo-Mechanically Treated bars of grade Fe-500D work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks.( Upto V FLOOR)
896.07
7852
7035941.64
... More
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)
416.98
299
124677.02
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.
241.31
142
34266.02
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : UPTO PLINTH LVL. (a) Foundations, footings, bases of columns, etc. for mass concrete.
227.6
285
64866
... More
(b) Columns,Pillars, Piers, Abutments, Posts and Struts.
209.08
699
146146.92
... More
© Lintels, beams, plinth beams, girders, bressumers and cantilevers
302.81
536
162306.16
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(R.C.C. WORK IN COLUMN, LINTEL,SLAB & BEAM)
294.78
8377
2469372.06
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) (a) Ground Floor to Mumty floor
384.43
6630
2548770.9
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)
25.75
6803
175177.25
... More
The integral cement-based waterproofing treatment for roofs, balconies, and terraces involves applying a slurry coat of cement mixed with a waterproofing compound over the RCC slab and walls. Brick bats will be laid with 1:5 cement mortar over a 20mm thick base layer, both mixed with the waterproofing compound. After curing, a second coat of cement slurry will be applied, followed by 20mm thick jointless cement mortar with glass fibre cloth reinforcement. The surface will be finished with neat cement slurry, and a 300x300 mm pattern will be formed. Finally, the terrace will be flooded for two weeks for curing and testing. The average thickness of the treatment will be 120mm, with a minimum thickness at the khurra of 65mm i.e., complete in all respect as specified by the Engineer-in-charge.
555.75
1226
681349.5
... More
(a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
87.78
1742
152912.76
... More
(b) Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
6.3
2090
13167
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (a) Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (Hold fast)
409.2
97
39692.4
... More
(b) Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.(M.S. Grill & Z-section)
7865.8
125
983225
... More
(c) Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size
2010.67
142
285515.14
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.With 2nd class teak wood beading 62X19 mm
79.35
1162
92204.7
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces
2.1
4226
8874.6
... More
12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)
1374.11
250
343527.5
... More
15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand)
2993.28
287
859071.36
... More
6mm Thick plaster on ceiling in 1:3 cement & fine sand mortar with all complete as per i/c (a) Ground Floor
954.81
218
208148.58
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
7557.64
57
430785.48
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate.
232.8
447
104061.6
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
7.71
5736
44224.56
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (a) Ground Floor
533.26
1131
603117.06
... More
Providing and laying vitrified tiles in flooring or skirting in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
77.45
1181
91468.45
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick.
16.43
1418
23297.74
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
3.7
1714
6341.8
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (a) Ground Floor
290.27
810
235118.7
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Area of slab upto 0.50 sqm)
528.07
3941
2081123.87
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specificationsPainting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
324
124
40176
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture.
188.16
128
24084.48
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
1292.85
124
160313.4
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre (For Internal wall surface)
3948.09
135
532992.15
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
5240.94
113
592226.22
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
128.95
775
99936.25
... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .
56
500
28000
... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete (a) 250 mm x 10mm
56
350
19600
... More
Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm
112
250
28000
... More
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.
112
197
22064
... More
Providing & laying of light cinder filling under floor of toilets & other sunken roofs.
16.74
2000
33480
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
65.73
449
29512.77
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.
281.88
562
158416.56
... More
(c) Foundations, footings, bases of columns, etc. for mass concrete
21.6
285
6156
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Above Plinth (i) Suspended floors, roofs, landings, balconies and access platform.
1053.77
675
711294.75
... More
(ii) Lintels, beams, plinth beams, girders, bressumers and cantilevers. (FOR LINTEL)
88.01
536
47173.36
... More
(iii) Lintels, beams, plinth beams, girders, bressumers and cantilevers. (FOR BEAM)
725
536
388600
... More
(iv) Columns,Pillars, Piers, Abutments, Posts and Struts.
730.92
699
510913.08
... More
Filling of carted earth lead upto 8 km distance
45.26
509
23037.34
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. for PV Platform
18.47
1546
28554.62
... More
Reinforced cement concrete work in walls (any thickness), including
attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1 :1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) for PV Platform
1.05
7902
8297.1
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes for PV Platform
6976.73
141
983718.93
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 1.0 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. PV Platform
135.44
537
72731.28
... More
SANITATION WORK
Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
1
4927
4927
... More
Providing and fixing white glazed earthen water closet (European type) W.C. Pan 580mm dia,(10 ltr) C.I. Flushing Cistern complete with G.I. Pull chain,M.S.Bracket of Engineer-in-Charge.(Standered size)
16
4744
75904
... More
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
18
1928
34704
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580*380*350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in D.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required: Range of single half stall urinals with 5 litre PV.C. automatic flushing cistern.
6
8789
52734
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia
24
75
1800
... More
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
18
1170
21060
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms
18
273
4914
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
10
516
5160
... More
CP Brass fittings Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore
22
71
1562
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 a) 15 mm nominal bore
10
369
3690
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15 mm nominal bore
18
581
10458
... More
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
40
418
16720
... More
WATER SUPPLY
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110mm
6
270
1620
... More
Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) 100 /90 mm dia
42
702
29484
... More
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.110 mm
42
274
11508
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Bend 87.5 degree 110 mm Bend
7
161
1127
... More
Shoe (Plain) 110 mm Shoe
7
96
672
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
7
39
273
... More
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
7
270
1890
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
7
217
1519
... More
INTERNAL WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. (a) 25mm dia nominal outer dia pipes
140
456
63840
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work-Exposed on wall (a) 15 mm nominal outer dia Pipes
30
208
6240
... More
(b) 20 mm nominal outer dia Pipes
90
243
21870
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. (a) 20 mm nominal outer dia Pipes
60
391
23460
... More
15 mm nominal outer dia Pipes
40
362
14480
... More
Providing and fixing gun metal gate valve with wheel of approved quality. (a) 25mm dia nominal bore
7
453
3171
... More
(b) 20mm dia nominal bore
5
393
1965
... More
© 40mm dia nominal bore
1
601
601
... More
Providing and fixing brass stop cock of approved quality.b) 20 mm nominal bore
3
276
828
... More
Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license].Capcity in Per Liters
10000
8
80000
... More
SANITARY INSTALLATIONS & C.P FITTINGS Providing and fixing in floor and wall face Ringfit UPVC ASTRAL ULTRADRAIN Conventional system for soil and waste water pipes conforming to (HSN CODE: 3917) Type B including jointing with seal ring. (i) Double socketed pipes.a) 110mm dia P.V.C. pipe
100
610
61000
... More
b) 90mm dia P.V.C. pipe
160
510
81600
... More
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince) P-Trap type Floor Trap 110 x 90 mm
24
270
6480
... More
Providing and fixing terminal guard.a) 110mm
10
80
800
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.110mm bend
14
220
3080
... More
90 mm bend
14
205
2870
... More
Coupler 110mm
6
150
900
... More
Coupler 90mm
6
140
840
... More
Single tee with door 90x90x90 mm
10
245
2450
... More
Single tee with door110x110x110 mm
10
335
3350
... More
Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fauct of approved quality conforming to15 mm nominal bore
16
1270
20320
... More
Providing and fixing clean out plug 110 mm dia.
4
135
540
... More
COST OF SEWERAGE WORKS Excavating trenches in all kinds of soil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. up to 1.50 m depth Pipes 80 mm to 300 mm diameter
30
256
7680
... More
1.50 m to 3.00 m depth Pipes 80 mm to 300 mm diameter
20
348
6960
... More
Open timbering in trenches including shuttering and shoring complete. (Measurement to be taken of the face area timbered) Depth not exceeding 1.5 meter
30
52
1560
... More
Depth 1.5 to 3.00 meter
20
59
1180
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
30
405
12150
... More
250 mm. dia. RCC Pipes
20
655
13100
... More
Providing and laying cement concrete 1:5:10(1cement:5coarse sand :10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design :150 mm. dia.
30
541
16230
... More
250 mm. dia.
20
740
14800
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).With common burnt clay FPS (non modular) bricks of class designation 75 (i) For Sewer Line
5
9298
46490
... More
Extra for depth for manholes: Size 90x80cm with With common burnt clay FPS (non modular) bricks of class designation 7.5
5
6426
32130
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and
weight of frame 100 kg) :With common burnt clay FPS (non modular) bricks of class designation 75 (i) For Sewer Line
5
23924
119620
... More
Extra for depth for manholes: Size 90x120cm with With common burnt clay FPS (non modular) bricks of class designation 7.5
5
7707
38535
... More
Providing orange colour safety foot rests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
5
403
2015
... More
EXTERNAL WATER SUPPLY WORKS Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work): 80mm nominal bore.
50
758
37900
... More
65mm nominal bore.
10
652
6520
... More
25mm dia nominal outer dia pipes
10
456
4560
... More
Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.:80mm nominal bore.
2
747
1494
... More
65mm nominal bore.
2
1268
2536
... More
25mm dia nominal bore
2
453
906
... More
Constructing masonry Chamber 90X90X100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand ) for sluice valve, with C.I. surface box 100mm, top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
13759
27518
... More
Construction of the septic tank (7.50m length, 2.65m width, and 3.00m total depth) includes earthwork excavation in all types of soil up to the required depth, ensuring proper disposal and leveling. Cement concrete (1:2:4) will be provided and laid in the base and RCC slab, with brick masonry (1:4 cement mortar) used for the walls and partitions. Reinforcement steel will be supplied and placed as per structural requirements, along with centering and shuttering for concrete structures. The internal surfaces will be finished with a 15mm thick cement plaster (1:4). Essential fixtures such as CI tees at the inlet and outlet, 75mm dia vent pipes, and CI terminal guards will be installed. Additionally, MS footrests and RCC manhole covers of specified dimensions will be fixed to ensure proper functionality. All work will be carried out as per standard specifications and under the direction of the Engineer-in-Charge.
1
231003
231003
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design.With F.P.S. bricks
2
19558
39116
... More
DRAINAGE NETWORK
Excavating trenches in all kinds of soil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. up to 1.50 m depth :Pipes 80 mm to 300 mm diameter
80
256
20480
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
80
405
32400
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design:150 mm. dia.
80
541
43280
... More
a) Inside M.H. chamber size 60x60 cm & 90 cm with bricks of class designation 50 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500 mm dia cover without frame (medium duty)
5
5965
29825
... More
Construction of a 2.20 m high boundary wall with 0.45m High MS Grill: including excavation for foundations, followed by the laying of cement concrete (1:4:8) up to plinth level. Reinforced cement concrete (RCC) work will be carried out for columns and walls above the plinth level using a mix of 1:1.5:3. Brickwork will be done using common burnt clay F.P.S. bricks( class 7.5) in a 1:6 mortar. The wall will be plastered with 12mm cement plaster (1:6 mix) and finished with waterproof cement paint. M.S. grills will be installed for any required openings, and painting will be applied to steel elements as per specifications ., Complete in all respect as per direction of engineer in charge.
220.59
14262
3146054.58
... More
The construction of a rainwater harvesting pit with an integrated desilting chamber involves several key steps, starting with the excavation of trenches for foundations, pipes, and cables in ordinary soil, with depths ranging from 1.5m to 6.0m, as per the engineer's instructions. After excavation, cement concrete (1:2:4) is laid for the foundation and floor, followed by Class M-150 brickwork in 1:4 mortar for the foundation and plinth. Reinforced cement concrete (RCC) slabs are cast for culverts, excluding centering, shuttering, and reinforcement. Mild steel reinforcement is used for plain concrete work, including MS footrests and manhole covers. Borewell drilling, both manually and with machinery, is done for the installation of PVC pipes (150mm diameter) to support the recharge pit and water flow. The recharge pit itself is constructed by layering boulders (5-20 cm), gravel (5-10 mm), and coarse sand (1.5-2 mm) in the prescribed thicknesses, ensuring proper leveling. The desilting chamber follows a similar construction method with cement concrete (1:4:8) and brickwork, along with the installation of a reinforced RCC slab and cement plaster for finishing. The final steps include the installation of precast RCC manhole covers and MS footrests embedded in cement concrete blocks. Throughout, all work is completed as per the engineer's directions, ensuring the proper functionality and durability of the rainwater harvesting system.
1
324212
324212
... More
Construction of a 6m wide MS Gate includes excavation for the foundation, followed by the laying of cement concrete (1:4:8) up to the plinth level. The gate frame will be constructed using M.S. or iron, with required welding and fabrication, including trusses, gates, and fixing bolts. Thermo-Mechanically Treated (TMT) Fe-500D bars will be used for reinforcement, ensuring proper bending and placement. Steel work will be painted with Deluxe Multi Surface Paint in two coats, along with waterproofing cement paint applied to exposed walls. Centering and shuttering will be provided for foundations and structural elements, complete in all respect as per the engineer’s in charge direction and technical sanction.
2
139037
278074
... More
Tubewell boring with Pump: The construction of the borewell involves several steps, executed as per IS: 2800 (Part I) and other relevant standards. Boring will be performed using suitable methods, including collecting samples from different strata and submitting bore logs. The drilling will be carried out up to 150 meters depth as directed by the Engineer-in-charge. Unplasticized PVC pipes (150mm diameter) will be assembled, lowered, and fixed in the borewell, with both casing and screen pipes conforming to IS: 12818, ensuring proper fittings and accessories. Coarse sand will be spread in the recharge pit, and development of the tube well will be carried out, including disinfection and yield measurement. Additional tasks include installing MS clamps, bail plugs, and sluice valves, as well as providing GI pipes, tubewell motor pumps, and water supply tankers. Cables will be laid with protection and earth connectivity, ensuring proper alignment and installation as per specifications. The work is to be completed in all respects, adhering to the directions of the Engineer-in-charge.
1
381968
381968
... More
Construction of a CC (Cement Concrete) road
including excavation in trenches for foundations, followed by laying a base of cement concrete (1:4:8 mix) and brickwork in cement mortar (1:4). Reinforced cement concrete (RCC) is prepared using design mix concrete with specified aggregates, Portland cement, and admixtures for strength and durability. M30 grade concrete with a minimum of 350 kg/cum cement is used. A granular sub-base is laid, compacted using vibratory rollers. Fe-500D TMT bars are used for reinforcement. Finally, bitumen hot sealing compound is applied for expansion joints, ensuring structural integrity and longevity of the road. Complete in all respect as per dircetion of engineer in charge.
2054.51
3193
6560050.43
... More
Construction of an open surface drain: Including earthwork excavation using mechanical or manual means, ensuring proper dressing, ramming, and disposal of surplus soil within 50m. The base is prepared with cement concrete (1:4:8 mix) using coarse sand and graded stone ballast for stability. Brickwork with common burnt clay bricks in cement mortar (1:4) is laid to form the drain walls. A 15 mm cement plaster (1:4 mix) is applied on the rough side of the brick walls for a smooth finish. Finally, cement concrete flooring (1:2:4 mix) with a neat cement finish ensures durability and water flow efficiency.Complete in all respect as per dircetion of engineer in charge.
300.59
1661
499279.99
... More
FIRE DETECTION AND ALARM SYSTEM Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. 2 LOOP PANEL.
1
188748
188748
... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
2
2254
4508
... More
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
2
217
434
... More
Supplying, installation, testing & commissioning of addressable fire control module complete as required.
1
2369
2369
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required
2
3054
6108
... More
Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required.
2
2091
4182
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheathcomplete as required.
100
136
13600
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :100 mm
4
5260
21040
... More
80 mm
2
3930
7860
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100 mm
1
8718
8718
... More
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
2
943
1886
... More
Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with 80 kg/cum density resin bonded fiber glass or 144 Kg/ cu m density mineral wool (non Combustible) pipe section insulation covered with a layer of 120 gm/sqm polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints and repairing of damage to building etc. as per specifications and as required.Note: The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 100 mm
25
2767
69175
... More
80 mm
10
2264
22640
... More
25 mm
10
1068
10680
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 5000.00 Ltr.
5000
7
35000
... More
Supplying & fixing single headed internal yard hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel, ISI marked, confirming to IS 5290(type A) with blank Gunmetal/Stainless Steel cap and chain as required: Single headed Gunmetal
1
6032
6032
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :4 way - 150 mm dia M.S. Pipe
1
11025
11025
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic(Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.40 m
2
9525
19050
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
1
14394
14394
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal
4
4104
16416
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle confirming to IS:903 suitable for instantaneous connection to interconnect hos pipe coupling as required. Gun Metal
2
1906
3812
... More
Supplying, Installation, Testing & Commissioning of Electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required:(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal confirming to IS 1520.(b) Suitable HP Squirrel cage indution motor, TEFC type synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, confirming to IS-325.(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plastered with anti vibration pads. 450 lpm at 35 m Head
1
68014
68014
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
1
1219
1219
... More
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :32mm nominal bore.
30
535
16050
... More
Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.
2
834
1668
... More
Surface dressing of road with Painting between using 2.25 kg. of bitumen per sq.mt with 1.65 cum of stone chipping ,13.2 mm nominal size/100 sq.mt of road surface including corolidation .(Although this job the fore will be given to civil contractor /Required Tank and pump house as per direction of Fire Department)
6
3150
18900
... More
Supplying Installation testing & Commissioning of 25 mm Ball valve PN -1 gunmental as per IS:778 including necessary accessories and connections. Make : Standard Make
3
1755
5265
... More
Providing/Fixing of Fire Hose cabinet box made out of 18 gauge MS sheet including two coats of post office red paint over one coat of primer with 4 mm, thick glass door in front painted “FIRE” in red luminous paint. The size of the box should be 750 mm X 600 mm X 250 mm size capable of accommodating a pair of hose with coupling and nozzle. The box should be floor mounted type with railway coach lock arrangement and lever for opening the door after breaking the glass complete. Make : Standard Make
2
11250
22500
... More
Providing/Fixing of cubical type floor mounted Fire pump control panel fabricated from 16 G M.S. sheet duly powder coated finish of approved shade and comprising of :
a) One 63 amp. TP+NL M.C.C.B with rotary handle of beacking capacity 35 KA.
b)One Volt meter (0-500 V) with selector switch.
c) One set including lamps. Make : Standard Make
1
54000
54000
... More
Supplying and laying of Insulated PVC sheathed ,Steel Aromed ,Copper Aluminum Conductor, 1100V grade Powder Cable . The cable shall be laid in tray /in trenches/on wall /floor etc. As required (Approx quantities only). Make : RR Kabel / Policab / Finolex 2 crore x 1.5 sq.mm Cu Cable
50
188
9400
... More
3.5 crore x 25 sq.mm AL Cable
40
335
13400
... More
Supplying and fixing of Self Glow Exit signage for stairs and exits size 100 x 300.
6
2700
16200
... More
Fire man axe. Make: Firetol / Swastik / Innovative
2
1800
3600
... More
Supply & fixing of fire extinguishers, CO2 type 6.50 Kg capacity (ISI marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
4
17910
71640
... More
Supply & fixing of fire extinguishers, ABC type 6.00 Kg capacity (ISI marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
4
8190
32760
... More
WIRING IN STEEL AND PVC CONDUIT Wiring for light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed PVC conduit, with
modular switch, modular plate, suitable GI box and earthing the
point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable etc. as required.Group C
294
1157
340158
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C
12
676
8112
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface /
recessed PVC conduit, 2 way modular switch, modular plate,
suitable GI box and earthing the point with 1.5 sq.mm FRLS
PVC insulated copper conductor single core cable etc. as
required.
14
1232
17248
... More
Supplying and fixing of 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
153
68
10404
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.
79
103
8137
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
350
183
64050
... More
(b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
650
216
140400
... More
© 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
710
263
186730
... More
(d) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
430
346
148780
... More
(e) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire
350
792
277200
... More
(f) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire
350
1076
376600
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC
insulated annealed copper conductor, unarmored telephone
cable in the existing surface/ recessed steel/ PVC conduit as
required.2 Pair
285
29
8265
... More
Supplying and drawing co-axial TV cable, 0.7 mm
solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.RG-6 grade
280
37
10360
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the
existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
680
44
29920
... More
Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of recessed
conduit as required. 25 mm
650
114
74100
... More
Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
21
573
12033
... More
Supplying and fixing two module stepped type electronic fan
regulator on the existing modular plate switch box including
connections but excluding modular plate etc. as required.
59
291
17169
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(a) 15/16 A switch
47
123
5781
... More
(b) 3 pin 5/6 A socket outlet
130
96
12480
... More
(c)Telephone socket outlet
34
116
3944
... More
(d) TV antenna socket outlet
1
116
116
... More
(e) RJ 45 Socket For Internet Similar to Legrand Cat Ref. 673155 or equivalent.
42
557
23394
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (a) 1 or 2 Module (75 mmX75 mm)
76
235
17860
... More
(b) 6 Module (200 mmX75 mm)
56
317
17752
... More
Supplying and fixing suitable size GI box with modular plate
and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
79
376
29704
... More
Supplying and fixing suitable size GI box with modular plate
and cover in front on surface or in recess, including providing
and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and
15/16 A modular switch, connections etc. as required.
47
462
21714
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required.
21
573
12033
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
7
78
546
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
59
168
9912
... More
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
373
44
16412
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing,commissioning etc. as required.Upto 450 mm sweep
20
355
7100
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
20
163
3260
... More
Providing and fixing circular/ Hexagonal GI box for ceiling fan
clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick GI sheet with its top surface hacked for proper bonding, top lid shall be screwed into the GI box by means of 3.3 mm dia round headed screws, one lock at the corners, clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard
drawing.
59
102
6018
... More
Earthing with G I earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
5895
11790
... More
S/F of switch board for computer point having 1 nos 15 Amp switch socket and 3 nos 5 amp switch socket on modular plate complete in all respect
20
1017
20340
... More
Providing and fixing 25 mm X 5 mm G I strip on surface or in recess for connections etc. as required.
40
192
7680
... More
DBs & MCBs
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door
8
3924
31392
... More
Supplying and fixing 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) 5 to 32 Amp. Single pole
113
201
22713
... More
(b) 5 Amp to 32 Amp MCB blanking plate
47
10
470
... More
(c) 40 Amp. Four pole
4
2084
8336
... More
(d) 63 Amp. Four pole
4
2266
9064
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150
mm, made of mild steel, at least 2 mm thick, and vitreous
enameled white on both sides, and with inscription in single red colour on front side as required.
5
212
1060
... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43)
suitable for following triple pole and neutral, sheet steel, MCB
distribution board, 415 V, on surface/ recess, complete with
testing and commissioning etc. as required. For 6 way, Double door TPN MCBDB
8
886
7088
... More
Surface/Recess Luminaire Supplying and fixing Of IP 20 mid power SMD type LED Light 2x2 36 watt to 46 watt indoor recess mounting LED square fitting for armstrong ceiling powder coated CRCA housing body High purity UV stablised non yellowish diffuser reflector for uniform light distribution detachable driver set open and short circuit protection suitable for 24 Hr continuios operation 4320-5520 system lumens, with fully covered diffuser type 120 Lm/W, PF0.95, THD10% at full load CRI 80, 300V over voltage protection, 4 KV internal Surge Protection, metal housingwith 5 years warrantee Cat AAA Complete in All respect. compelete in all respect.
40
4666
186640
... More
Supplying and fixing Of water tight oblong 10 watt LED bulkhead luminare having pressure die cast housing with driver set confirming IP65 and above protection IK 08 Highpurity transtivty UV stablised non yellowish diffuser reflector for uniform light distribution detachable driver set open and short circuit protection suitable for 24 Hr continuios operation 1200 system lumens, 120 Lm/W, PF0.95, THD10% at full load CRI 70, 300V over voltage protection, 4 KV internal Surge Protection, metal housingwith 5 years warrantee Cat AAA Complete in All respect. compelete in all respect.
12
1700
20400
... More
Supply and fixing LED Bulb 9 watt lumen 810 to 945 complete in all respect.
79
205
16195
... More
Supplying and fixing Of IP 20 mid power SMD type LED Light surface mounting LED round fitting 18 to 20 watt cutout min 150mm Height min 40mm LED down lighter having powder coateddie cast aluminuim housing body with heat sink High purity UV stablised non yellowish diffuser reflector for uniform light distribution detachable driver set open and short circuit protection suitable for 24 Hr continuios operation 2160-2400 system lumens, with fully covered diffuser type 120 Lm/W, PF0.95, THD10% at full load CRI 80, 300V over voltage protection, 2.5 KV internal Surge Protection, metal housingwith 5 years warrantee Cat AAA Complete in All respect. compelete in all respect.
40
1750
70000
... More
Supply and fixing of single light wall bracket with opal glasspaint finishing up to 6 watt LED complete in all respect.
14
990
13860
... More
upply and fixing Lamp based LED Mirror Light 11 watt lumen 800 complete in all respect.
9
1794
16146
... More
Supplying and fixing Of 18- 22 watt LED Tube light with heavy duty metal box type tube fitting 1x22 watt suitable for upto 1x22 watt LED polycarbonate tubelight complete including tube suitable both surface and suspended 2620 system lumen 120 Lm/W, PF0.95, THD10% at full load CRI 80, sheet thickness min 0.8 mm tube with aluminium heat sink 300V over voltage protection, 2.5 KV internal Surge Protection, metal housingwith 5 years warrantee Cat AAA Complete in All respect. compelete in all respect.
94
995
93530
... More
Supplying, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor notless than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
53
2153
114109
... More
Supplying installation testing and commissioning of 450mm sweep wall fan .
6
4284
25704
... More
Supplying installation testing and commissioning of 300mm sweep 1500 RPM heavy Duty Exhaust Fan .
20
5092
101840
... More
UNDER GROUND CABLES Supply and Laying of Aluminium conductor PVC insulatedarmoured served sheated cables 1100 V grade at a depth of 750mm below ground level over a cushion of 75 mm thick sand all around and protected with brunt bricks on sides and on top . On surface the cable run shall be fixed on M S clamps etc of suitable size or as directed by Enginner in charge complete in all respect including excavation and refilling . The armouring of the cable shall be properly connected with the earth conductor by clamps etc 3½ X 300 sq. mm
320
2322
743040
... More
Supply and Laying of Aluminium conductor PVC insulatedarmoured served sheated cables 1100 V grade at a depth of 750mm below ground level over a cushion of 75 mm thick sand all around and protected with brunt bricks on sides and on top . On surface the cable run shall be fixed on M S clamps etc of suitable size or as directed by Enginner in charge complete in all respect including excavation and refilling . The armouring of the cable shall be properly connected with the earth conductor by clamps etc 3½ X 70 sq. mm
150
328
49200
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required size 3.5 x400 sqmm
2
1183
2366
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required size 3.5 x70 sqmm
4
322
1288
... More
S/F Lugs 4 sqmm
27
17
459
... More
S/F Lugs 6 sqmm
28
17
476
... More
S/F Lugs 16 sqmm
40
21
840
... More
S/F Lugs 25sqmm
40
27
1080
... More
S/F Lugs 70 sqmm
8
67
536
... More
S/F Lugs 400 sqmm
8
596
4768
... More
Earthing Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
5
5895
29475
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter
below ground as strip earth electrode, including connection/
terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)
330
113
37290
... More
Supplying and fixing of 7 mtr G I Octagonal pole of approved make (top dia 70mm bottom dia 130 mm & base plate 12mm thick ) having 3mm thickness with single arm bracket length 1 mtr long in 1:2:4 RCC foundation bolt including the cost of foundation excavation and back filling and required T&P complete in all respect
8
18354
146832
... More
Supply and Laying of Aluminium conductor PVC insulatedarmoured served sheated cables 1100 V grade at a depth of 750mm below ground level over a cushion of 75 mm thick sand all around and protected with brunt bricks on sides and on top . On surface the cable run shall be fixed on M S clamps etc of suitable size or as directed by Enginner in charge complete in all respect including excavation and refilling . The armouring of the cable shall be properly connected with the earth conductor by clamps etc size 16 sqmmx 4 core
160
523
83680
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in
recess for connections etc. as required.
240
192
46080
... More
Main L.T. PANEL
Supply & Errection of factory fabricated & wired metal clad and vermin proof floor mounting M S channel base with bottom and top cable entries electrical contro pannel with TPN MCCBfour pole 36 KA with thermal magnetic release switches complete and instrument chamber etc complete in all respect. The instrument chamber shall be seprate and shall comprises of flush type digital metering system for phase to phase voltage and single phase voltage current and other parameters(KVA P F K W etc)in each phase touch type selecter switch for diffrent reading instrument fuses current transformer etc. The Main LT Panel shall have suitable capacity electroytic aluminium busbars as per IS 8623 or above insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with detachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes compression glands and indicating lamp on incomming etc. The Job includes the grouting of board as per direction of Enginner in charge . All outgoings of 100 Amp and above shall have an Ammeter The pannel board shall be fabicated CRCA sheet with minimum thickness of 1.6/2mm . cubical type switrch board shall be Cat A & B only INCOMER:1 Nos.400 AMP 4P MCCB 36 KA rating ,Bus Bar:1 Nos.400 AMP 4P Al Bus Bar,Changeover switch on load:1 Nos.200 AMP 4P,OUTGOING:4 Nos. 100 Amp 4P MCCB (25 KA Ics),4 Nos. 63 Amp 4P MCCB (25 KA Ics) 4 Nos. 40 Amp 4P MCCB (25 KA Ics) INSTRUMENTS AS per SLD Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
1
470000
470000
... More
Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 75 watt to 90 watt. Confirming to IP 66 and above protection complete in all respect.
8
8580
68640
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
8
201
1608
... More
DG SET Supply, Installation, Testing & Commissioning of 03 phase volts 50 cycle per second 1500 RPM air cooled, diesel generating set complete with silent type DG canopy & limiting sound level to 75 dB (A) over a distance of one meter with engine, alternator air cooled. The engine shall be complete with flywheel to suit flexible coupling with guard, air cleaner, fuel pump, fuel day tank, variable speed governor, fuel filter, lube oil filter, battery charging generator, voltage regulator, 24 volt charged voltage regulator, capacity and instrument panel comparing switch with key, space heater, lube oil temperature gauge, lube oil pressure gauge, water temperature gauge, battery charging ammeter, safety control for low lube oil pressure and high temperature tripping. The canopy temperature shall not exceed 7 degree above the alternator shall be brushless type excited and self regulated continously rated as follows, 3 phase 415 volts 50cycles, 4 wire system and shall be provided with static excitation unit, alternator insulation shall be class "H" or better to withstand tropical conditions and shall generally comply with relevant IS and present by-laws under average conditions the voltage regulation shall be within ± 1.5%. The overload capacity shall not be less than 110% for one hour in every 12 hours. The set shall be mounted on a common bed plate with antivibration mounting and alternator shall be suitable for LT AL XLPE cables connection and alternator shall be suitably modified and similarly provision shall be made in the canopy to take out AL XLPE cables (CPCB-IV) DG Set Compatible for synchronising Panel 33 KVA
1
547000
547000
... More
LIFT (8 PASSENGER)
Supply and installation of an 8-person passenger lift with automatic doors, an energy-efficient motor, and essential safety features per relevant norms. It covers installation, alignment, testing, and shaft preparation. Electrical works include wiring, control panels, and power connections. Safety features such as an emergency alarm, Automatic Rescue Device (ARD), overload sensor, and fire-resistant materials are included. Civil works involve modifications to the lift well, pit, and machine room. The lift will undergo statutory testing and final commissioning.Complete in all respect as per direction of engineer in charge.
1
1255000
1255000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%