Central Electronics Limited Tender

Dismantling/Removing of all existing pipes,wash basins,switch boards, conduits and all other plubing fittings including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Brick masonry with 1st class brick in cement mortar 1:4.(1 cement : 4 fine sand)

15 mm cement plaster on both sides of wall of mix: 1:4(1 cement : 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Two coats Wall painting with plastic emulsion paint of approved brand and manufactureto give an even shade.

Providing & fixing of false ceiling with gypsum tiles (600x600mm) with supporting grid system.

Providing and fixing full height aluminium(18 gauge) partition with glass size 2.5'' x 2.5'' x 5.5mm thickness powder coated (grey) upto 3.5m height

Provision of aluminium doors(18 gauge) with glass section size 2.5'' x 2.5'' x 5.5mm thickness powder coated (grey) with all fittings & fixtures like, door lock, handle, tower bolt etc.

Providing and fixing floor springs.(Make:Samrat,Sandu,Amar)

Providing and fixing of aluminium glazed windows, ventilators etc. with 5.5 mm thick clear toughned glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc

Providing and fixing of 2mm thick homogeneous PVC vinyl flooring (Make:Wonderfloor Vinyl Flooring/ Polyflor.)

Furniture

Supplying, and placing in position of table of size :- L-1800mm x D-900mm x H-750mm as per photograph. The main desk shall be made out of 25mm thick pre laminated particle board and contained the thickness of table top shall be 40mm center to center and from all the sides of table top, pre laminated particle board . Side panel shall be made out of 18mm thick pre laminated particle board and front modesty 18mm thick pre laminated particle board. Interchangable Side unit of size :- L- 1200mm x D-450mm x H-750mm shall be having a provision of a fixed pedestal of three drawers .Side unit top shall be made out of 25mm pre laminated particle board. The under structure shall be made out of 18mm thick pre laminated particle board. Table shall have one fixed pedestal unit attached table top and side panel. Pedestal sides, front and bottom shall be made out of 18mm thick pre laminated particle board. Drawer bottom and backing of the pedestal should be 9mm thick pre laminated particle board. The back unit top shall be made out of 18mm thick pre laminated particle board finished with PVC edgebanding. The under structure shall be made out of 18mm thick pre laminated particle board. The storage back shall be 9mm thick particle board . Provision of flip top box with snake pole for wire management.

Meeting Room: Supplying, and placing in position of 8 seator Conference Table as per photograph. Confrence table Size ;- L- 1800mm x D-900mm x H-750mm.Conference table comprises of table top which shall be made out of 36mm thick particle board at sides . Table top shall be supported with pre laminated legs and modesty panels shall be made out of 18mm thick particle board. Provision of wire raceway under the table top for wires flow.Provision of junction box for wire management through floor and wire raceway under the table top.Complete as per approved make of image and specification under the guidance of Engineer in charge

Supplying and placing in position of Center Table as per photograph. Table glass size 995mmL x 545mmD x 415mmH, glass shall be 8-10mm thick toughened, edge beveled and in rectangular shaped. Under structure shall be made with solid wood contemporary chic design finish. Two number of glass supported on high quality SS chrome plated rings. Complete as per approved make of image and specification under the guidance of Engineer in charge.(Customized)

Linear Workstation & Server Room-Modular: Supplying and placing in position of sliding tile base modular Workstation of Size:- L-1650mm x D-750mm x H-1200mm as per image with . Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade.Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated Particle board of approved shade. Provision of two side partition Size ;- L-600mm x D-67mm x H-1200mm. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating.Provision of Mobile Pedestal.

Linear Workstation & Server Room-Modular: Supplying and placing in position of sliding tile base modular Workstation of Size:- L-1350mm x D-600mm x H-1200mm as per image with . Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade.Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated Particle board of approved shade. Provision of two side partition Size ;- L-600mm x D-67mm x H-1200mm. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating.Provision of Mobile Pedestal.

Cubicale Workstation-(modular): Supplying and placing in position of sliding tile base modular Workstation of Size:- L-1500mm x L-1500mmx D-600mm x H-1200mm as per image with . Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade.Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating.Provision of Mobile Pedestal.Provision of two side partition Size ;- L-600mm x D-67mm x H- 1200mm.

Cubicale Workstation-(modular): Supplying and placing in position of sliding tile base modular Workstation of Size:- L-1850mm x L-1500mmx D-600mm x H-1200mm as per image with . Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade.Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating.Provision of Mobile Pedestal.Provision of two side partition Size ;- L-600mm x D-67mm x H-1200mm.

Providing, supplying & placing at site 3 seeter sofa Leatherite Tapestry.

Supplying, and placing in position of storage as per photograph. Storage Size :- L-1500mm x D-450mm x H-1200mm. The complete storage unit shall be made up of 25mm thick prelaminated particle board finished with PVC edges . All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The storage shall be provisioned with 3 nos. of shelves and 3 nos. compartments.The storage shall have openable shutters with handles and locking arrangements.Complete as per image and specification under the guidance of Engineer-in-charge

Supplying, and placing in position of storage as per photograph. Storage Size :- L-1950mm x D-450mm x H-1200mm. The complete storage unit shall be made up of 25mm thick prelaminated particle board finished with PVC edges . All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The storage shall be provisioned with 3 nos. of shelves and 4 nos. compartments.The storage shall have openable shutters with handles and locking arrangements.Complete as per image and specification under the guidance of Engineer-in-charge

Supplying and placing in position of 360 degrees revolving high back chair as per photograph. The Craze chair of Size :- (W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The leatherette upholstery in the chair has the look and feel of top grain leather. The chrome plated loop armrest with padded upholstery is provided for extra comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions tolerance / variations shall be within +/- 1 cm..Complete as per manufacturer's specification and as per direction of Engineer - in –Charge.

Visitor Chair: Supplying and placing in position of 360 degrees revolving medium back chair as per photograph. The Oxford chair of Size :-(W)620mm X (D)500mm X (H)890mm - 990mm. The chair shall be ergonomically design contour lumbar back design made of 10-12mm thick BWP plywood upholstered with leatheritte and cut foam. The chair shall have fixed polypropelene arm rest.. The chair shall be provided with push back mechanism with locking system and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . The seat and back are made up of 10- 12 mm thick hot pressed BWR plywood (IS Grade - 303) upholstered with poly urethane foam. The chair seat has foam of density 30-35 (+/-2kg /m3) and the backrest has a foam of 28 (+/-2kg /m3) . Dimensions tolerance / variations shall be within +/- 1 cm. . Complete as per image, and specification under the guidance of Engineer in charge.

Workstation Area chair: Supplying and placing in position of 360 degrees revolving low back chair as per photograph. The chair of Size :- (W)625mm X (D)450mm X (H) 920mm. The breathable mesh back chair with cushioned fabric seat shall be ergonomically design with curved design . The chair shall be provisioned with fixed armrest and nylon base. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with push back mechansm and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm.The black Five star nylon base with hooded nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions tolerance / variations shall be within +/- 1 cm. Complete as per approved make of image and specification under the guidance of Engineer in charge.

Electrical

Wiring for light point/fan point/call bell point with 1.5 sqt.mm FRSL PVC insulated cooper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and Earthing the point with 1.5 sq.mm. FRLS PVC insulated cooper conductor single core cable etc as required.( Copper wire make- Havel’s, anchor, polycab, phenolex) Group -C

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. .( Copper wire make- Havel’s, anchor, polycab, phenolex) 2*2.5 sq. mm + 1*2.5. sq.mm earth wire

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. .( Copper wire make- Havel’s, anchor, polycab, phenolex) 2*4 sq. mm + 1*4 sq. mm earth wire

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. .( Copper wire make- Havel’s, anchor, polycab, phenolex) 4*2.5 sq. mm + 2*2.5 sq mm earth wire

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. .( Copper wire make- Havel’s, anchor, polycab, phenolex) 4*4 sq.mm + 2*4 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front of surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. .( make- Havel’s, anchor, cona)

installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30cm) with 1.5 sq.mm FRLS PVC insulated, cooper conductor, single core cable etc. as required.

Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15mm dia, heavy gauge including painting etc. as required.(note: more than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less small be ignored)

Supplying at site, 1200mm sweep, 3 blade, 230 volt, single phase ceiling fan, complete with all accessories, including regulator complete with testing etc. as required. ( Make- Usha, Crompton, Havells)

Supplying, installation, testing and commissioning of 2 x 2 LED panel, 18/20 watt, 215-230 volt LED light. (Make- plillips, GE, Havells, Suriya)

Supplying, installation, testing and commissioning of 1.5 ton 3 star, split AC, with indoor and outdoor unit, complete in all respect with all accessories like copper pipe, copper cable, insulation (Min. 03 mtr) and PVC drain pipe. (Make- Voltas, Daikin,Blue Star, Hittachi)

Providing and fixing (beyond 3 mtr) extra copper pipe, 3 core copper cable, Insulation etc. as required

Supplying and fixing of following ways surface/ recess, single pole and neutral, sheet steel, MCB distribution board, 240 volt, duly powder painted, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter connections, including earthing etc. as required. (Note: but without MCB/ isolator). .( make- Havel’s, anchor, Crompton) 2+12 way, single door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. .( make- Havel’s, anchor, Crompton) Single ploe

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. .( make- Havel’s, anchor, Crompton) SP&N

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclose with cover plate heaving locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 Run

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 2 Run

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 3 Run

Supplying and fixing at site 24 port 10/100 mbps switch , complete in all respect .