Central Drug Research Institute Tender

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement : 6 coarse sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Old work (one or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-Charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In cement mortar

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm.

Finishing walls with textured exterior paint of required shade : Old work (One or more coats) applied @ 1.82 ltr/10 sqm.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground with in 50 metres lead:

Providing and fixing stainless steel/carbon steel galvanised ( minimum coating 5 micron) expandable dash fastener of 10 mm dia of HILTI or BOSCH make including drilling of hole in frame , concrete/ masonry/ stone etc. as per direction of Engineer-in-charge all complete. Sample to be got approved from the Engineer-in-charge of the work before execution at site. :10 mm dia x 153 mm long

Providing and fixing stainless steel/carbon steel galvanised ( minimum coating 5 micron) expandable dash fastener of 10 mm dia of HILTI or BOSCH make including drilling of hole in frame , concrete/ masonry/ stone etc. as per direction of Engineer-in-charge all complete. Sample to be got approved from the Engineer-in-charge of the work before execution at site. :10 mm dia x 100 mm long

Providing and fixing stone cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to wall or like surface with cement mortar 1:3 (1 cement : 3 coarse sand) and/ or with the help of cramps, pins, expandable dash fastners (10 mm dia x 100/150 mm as per direction of Engineer-in-Charge of Hilti or Bosch make) etc. and sealing the joints with approved weather sealant as per direction of Engineer-in-Charge. (The stainless steel cramps and pins and dash fastners etc. shall be paid for separately). : Red sand stone - 30mm thick gang saw cut stone

Providing and fixing stone cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to wall or like surface with cement mortar 1:3 (1 cement : 3 coarse sand) and/ or with the help of cramps, pins, expandable dash fastners (10 mm dia x 100/150 mm as per direction of Engineer-in-Charge of Hilti or Bosch make) etc. and sealing the joints with approved weather sealant as per direction of Engineer-in-Charge. (The stainless steel cramps and pins and dash fastners etc. shall be paid for separately). : White sand stone - 30mm thick gang saw cut stone

Add for GST @ 12%