Cane Development And Sugar Industry Tender

Providing and laying Cement concrete 1:4:8 (1 cement : 4coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials.labour and T&P etc. required for proper completion of the work and curing complete. also including cost of formwork in foundation

Contruction of cement concrete kerb with top and bottom width 115 and 165mm repectivey,250mm high in M20 grade on M-15 grade foundation 150mm thick foundation having 50mm projection beyond stone kerb laid with kerb laying machine foundation concrete laid manully all complete as per clause 409 coplete excluding GST

Granular sub-base- Providing & laying granular sub-base by well graded material grade-I,spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC,and compacted with smooth wheel roller to achieve the desired density,complete as per Technical Specification clause 401 of MORD [Sir No 4.1]

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30 (Grade), coarse and fine aggregates conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.