Bundelkhand Institute Of Engineering And Technology Tender

Hard disk;- One external hard drive (WD My Book 4TB External Hard Drive Storage USB 3.0 File Backup and Storage)

mobile:- • 48+8+16MP triple rear camera with face unlock, HDR, screen flash, face retouching, in-built - Fingerprint, 4K video at 30/60 fps, 1080P video at 30/60 fps, super slow motion: 1080P video at 240 fps, 720P video at 480 fps, 720P video at 960 fps, time-lapse and video editor | 16MP front camera • 16.94 centimeters (6.67 inch) 90Hz fluid display capacitive touchscreen with 3120 x 1440 pixels resolution, 516 ppi pixel density • Memory, Storage & SIM: 12GB RAM | 256GB internal memory | Dual SIM (nano+nano) dual-standby (4G+4G) • Android v10 based on Oxygen OS operating system with 2.96GHz Qualcomm Snapdragon 855 Plus with AI Engine octa-core, 7nm processor, Adreno 640 • 4085mAH lithium-ion battery • 1 year manufacturer warranty for device and 6 months manufacturer warranty for in-box accessories including batteries from the date of purchase • Warp charge 30 power adapter, warp type-c cable (support usb 2. 0)

Sensor:-The system consists of six major embedded electronics. 1.ECG Sensor : double poles high-pass filter to eliminate the motion artifacts and electrode half cell potential an operational amplifier that is without using constraint to build a three pole low pass filter, eliminating extra noises • Rated temp range : 0-70 degree • Working temp range: 40-85degree 2.Heart Beat Sensor:The power supply voltage:3.3V~5 v 3.IR Sensor : COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etcAdjustable Range using preset (Using Potentiometer On board) | Mounting Hole of 2.5mm diameter for Easy Mounting. Operating Volt : 5V DC Digital O/P : logic one (+3.5V DC) logic zero (0V DC) 4.GSM Module /OEM 5.Arduino UNO. 6.LCD Display: Operate with 5V DC. You can connect directly to arduino board, Module dimension: 80mm x 36mm x 15mm, Viewing area size: 64.5mm x 16mm, Displays 2-lines X 16-characters, Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board Other component:1. Arduino UNO: This Kits Includes 1) 5 x 5mm Green LED 2,White LED 3,RED LED 4) 5 x 5mm Blue LED 5) 5 x 5mm Yellow LED 6) 15 x Push Button with cap 7) 2 x 10k ohm otentiometer 8) 20 x 220ohm Resistor 9) 20 x 1M Resistor 10) 20 x 10K ohm Resistor 11) 20 x 1K ohm Resistor 12) 20 x 100K Resistor 13) 20 x 56K Resistor 14) 20 x 15K Resistor 15) 20 x 4.7K Resistor 16) 20 x 150K Resistor 17) 20 x 680ohm Resistor18) 2 x Header Male Pin (Straight) /OEM 2.SIM 900 GSM MODULE 3.Sensors (i)ECG (ii)Heartbeat sensor 4.PCB Layout 5.Power adapter: Universal input voltage ; Input current: AC 100-240v, 50/60Hz, 0.35A