Bulandshahr Development Authority Tender
... More
The Bulandshahr Development Authority has issued a formal invitation for competitive bids for Work No 1 Yamunapuram Aavsye Yojana Me Statih Tran Taal Ka Sudhikren Ka Karya in Hathras, Uttar Pradesh, with an estimated contract value of Rs. 2,92,35,000. The bid opening date for this tender is 05-03-2025 and the last date for bid submission is 31-03-2025. Interested bidders for Bulandshahr Development Authority tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Bulandshahr Development Authority Tender
Eprocure
Opening Date5 Mar 2025
Closing Date31 Mar 2025
Tender Amount₹ 2,92,35,000
Technical
Technical
Financial
Bid Capacity
... View More
The bid capacity required in the given tender to bid having value and formulas are as follows: 1. For Work more than Rs. 200.00 lacs: - Minimum solvency required: 15% of the bid value - Two similar completed works aggregating amount to Bid Value - OR, One similar completed work costing not less than 80% of the bid value 2. For Work more than Rs. 25.00 lacs and up to Rs. 200.00 Lacs: - Minimum solvency required: 20% of the bid value - Three similar completed works aggregating amount to Bid Value (at least one work should be of 50% of bid value) - OR, One similar completed work costing not less than 80% of the bid value 3. Average annual financial turnover of immediate last 3 consecutive financial years on construction works should be at least 50% of the bid value. 4. Proof of Liquid Asset: - For work more than Rs. 200.00 lacs: 15% of the bid value - For work more than Rs. 25.00 lacs and up to 200.00 Lacs: 20% of the bid value
Technical Capacity
... View More
The required prior work experience for the bidder varies based on the bid value. For bids over Rs. 200.00 lacs, the bidder must have completed either two similar works aggregating to the bid value or one similar work costing at least 80% of the bid value. For bids between Rs. 25.00 lacs and Rs. 200.00 lacs, the bidder must have completed either three similar works aggregating to the bid value, with at least one work being 50% of the bid value, or one similar work costing at least 80% of the bid value. The experience should be in the last four years and in the organized sector, which includes government departments, public sector undertakings, and public limited companies. The similar work should be of a similar nature to the bid being asked for. The relevant values and percentages mentioned are Rs. 200.00 lacs, Rs. 25.00 lacs, 80%, and 50%.
Costs
EMD
₹ 5,85,000Document Cost
₹ 3,540Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_BDAB_1014052_1Bid Award Id
ViewTender No
4724/BKDA/2024-25 Dt.01-03-2025 TBTender Authority
Bulandshahr Development Authority ViewPurchaser Address
-Website
http://http://bdabulandshahar.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Flexible cable 4 core 2.5 mm with necessary accessory
1000
180
180000
... More
18.8.3 25 mm nominal dia Pipes
80
478
38292
... More
EMAUX make 9 inch long algae brush
1
2350
2350
... More
Alum Dosing Pump, Make - E-dose, Milton Roy 0-12 LPH@40 Mtr. head
2
35000
70000
... More
EMAUX make 24 inch long aluminium vacuum head
1
12000
12000
... More
Chlorine Dosing Pump, Make -E-dose, Milton Roy 0-12 LPH@40 Mtr. head
2
35000
70000
... More
Provaling and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimeron as below (tolerance ±1mm), with wall thicks 2.0 mm (±0.2 mm), comers of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side venical of the frames reinforced by galvanized M.S tube of size 19 X 19 mm and 1mm (z 0.1 mm) wall thickness and 3 nos stainless steel hinges fixed to the frame complote as per manufacturer's specification and direction of Engineer- in-charge (DSR-2023-9.117.1) 48x40 mm
65
206
13403
... More
PART A CIVIL WORK
-
-
-
... More
CF make 105 KVA Transformer for above Lights
5
20000
100000
... More
Suction Sweeper Pump 1 HP with starter
1
65000
65000
... More
Flexible Cable 3 core 2.5 mm with necessary accessory
100
150
15000
... More
Dry Acid
100
180
18000
... More
EMAUX makes Pump with pre-filter model SB-15, 4 HP single phase pump (25000 LPH flow @14 mtr head)
3
85000
255000
... More
PVC Pipe 63 mm fittings including
100
800
80000
... More
PVC Pipe 90 mm fittings including
250
1200
300000
... More
Part D - Electromechanical
-
-
-
... More
EMAUX make 30 mtr long vacuum hose pipe
1
7000
7000
... More
Providing and fixing 5mm glass panes in Z-section windows, doors, ventilator shutters and partition etc. with Glass putty/beading etc. complete [SOR-806+Cost Diff]
35
800
28000
... More
Off Grid Solar PV Power Plants
-
-
-
... More
EMAUX make Leaf rake deep bag type
1
1700
1700
... More
Supreme/Surya PVC Pipe (6-10KG) and fitting, ball valve, NRV
1
60000
60000
... More
Suction sweeper trolly
1
25000
25000
... More
PVC Pipe 75 mm fittings including
200
640
128000
... More
EMAUX make 18 inch long plastic brush
1
2200
2200
... More
LED-CP 100 LED Light 198 LED Light Panel, 6W/12V, Material: SS-304 + UV stabilizer, Cable: 2.5m, Waterproof: IP68, Surface Mounted type (RGB Auto color changing Bulbs)
100
6500
650000
... More
Providing wall putty on old surface with approved quality material of berger/J.K. /Birla or similar make 2 coats new item[15.27]2022
2000
75
150000
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre law level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid[17.3.1/2023]
6
6110
36661.8
... More
Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in-Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge dsr 2023 [11.53]
860
2969
2553770
... More
P/F GUN MATEL GATE VALVE 40 MM DIA DSR NO 18.17.3
4
630
2521.6
... More
P/F GUN MATEL GATE VALVE 25 MM DIA DSR NO 18.17.1
4
475
1900
... More
Part C ELECTRIFICATION WORK
-
-
-
... More
Wiring point for light with 1.5 sq.mm. FRLSH PVC insulated single core aluminium conductor cable in heavy guage rigid PVC conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 8 SWG GI earth continuity wire, GP Box, piano type switch & ceiling rose/angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed, including 1 matching colour wash [SN 138C
40
610
24400
... More
Distempering (two coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N. Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also sand papered smooth including supply of all materials, labour, Tools & plants etc required for proper completion of the work sor 2022 [649+650)
550
90
49500
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting 76 and making good the walls and floors wherever required: 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern
8
4776
38211.2
... More
Cement Concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc required for proper completion of the work. [279a-2022]
205
7050
1445250
... More
Chemical TCC 99 ablet
100
350
35000
... More
UV System for pool-55-304
2
95000
190000
... More
Finishing wall with weather coat by premium acrylic exterior paint applied @ 1.67 Itr/10 sqm (Asian or Berger Brand) of approved make and quality on wall with two or more coat to give an even shade including a priming coat with cement primer of approved brand and manufacturer exterior primer applied @ 2.20kg/10 sqm after thoroughly brushing the surtace free from mortar dropping and other foreign matters and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for completion of the work. (sor 15.23 new item)2022 proper
1500
140
210000
... More
Water Proofing 3 coat with injection grout
6000
90
540000
... More
EMAUX make 300 x 300 mm Main drain plate SS Body
2
8000
16000
... More
Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern DSR NO 17.5.2/23
4
13743
54974.4
... More
Emaux High rate sand filter with multiport valve V - 1200 mm dia Filter with 2.5 inch dia Multiport valve (Flow - 35,000 LPH per filter)
2
155000
310000
... More
EMAUX make 2 x 5 mtr long telescopic pole
1
8500
8500
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This 91 includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge
-
-
-
... More
Suction sweeper filter 400 mm
1
35000
35000
... More
Heat Pump 100KW
3
950000
2850000
... More
Dismantling existing plaster includingdisposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). [17.14-706-2022]
505
45
22725
... More
Emaux pH & Chlorine Test Kit
1
5000
5000
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling systern and rubber mallet for placing the tiles gently and easily. [DSR 2023-11.41A.3 Glazed Virtified tiles Matt/Antiskid of size of tile 600X600 mm)
790
1117
883148.9
... More
EM 4413 POOL IN LET NOZZLE
100
1200
120000
... More
Supply and fixing 20 mm thick Kota stone tiles in riser of steps, skirting, dado & Pillars laid on 12mm (Avg) thick morter in with 1:2 cement and approved coarse sand morter & jointed with gray cement slurry mixed with pigment to match the shade of slab finished with rubbing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work sor 2022 (14.22 new item)
76
1175
89300
... More
24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter) [DSR-2023-9.118.1]
15
2266
33990.3
... More
12 inch wide overflow channel grating in ABS white.
120
1500
180000
... More
12 mm thick cement plaster with cement and coarse sand mortar in 1:4 over brickwork minimum thickness not to be less than 1 cm. including supply of all material. Labour T&P etc. required for proper completion of work. (584 New item,)
505
200
101000
... More
EMAUX make 4 step SS Ladder (NSF Model)
4
38000
152000
... More
Alum Chemical
100
120
12000
... More
Electrical Panel with controller and safety protection
1
200000
200000
... More
Construction of granular sub-base by providing well graded Material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achive desired density complete as per Technical Specificationin clause 401
65
3814
247962
... More
HCL Dosing Pump, Make - E-dose, Milton Roy 0-12 LPH@40 Mtr. head
2
35000
70000
... More
PVC Pipe 110 mm fittings including
150
1600
240000
... More
P/F 15mm CP BRASS LONG BODY BIB COCK DSR NO 18.51.1
30
609
18291
... More
P/F WATER TANK DSR 18.48
2000
8
16780
... More
Painting roofs or other iron work in large areas with one 160.00 coat priming and two coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc required for proper completion of the work Paint to be used should confirm the ISI no. 103-109 sor 2022 (644+645)
160
100
16000
... More
Providing and fixing Ist quality commic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved male, in all colours, shades except burgundy, bottle green black of any size as approved by Engineerin-Charge in skikting risers of steps and dados, over 12 mm lick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sam, including pointing in white cement mixed with pigment of matching shade complete (DSR 8 31/2023]
430
967
416089.5
... More
18.8.2 15 mm nominal dia Pipes
160
379
60784
... More
Part B SANITARY WORK
-
-
-
... More
P/F 15mm CP BRASS ANGLE VALVE DSR NO 18.53.1
20
438
8764
... More
Providing, fabricating, assembling and erection of Tensile Fabric Roof along with fabric of approved make having minimum weight of 900 g/sqm with flame retardant as per particular manufracturer's specification PVDF lacquer on both sides. Colour of the fabric should be white, over steel frames with all fittings and fixtures such as Galvanised MS Membrane/ End Plate. Shackles, Rigging Screws, Turnbuckles, swedge, fork keder rods & galvanized MS strands/ cables with stainless steel end terminals complete as per Drawing/Detail & as per specifications and as per the instructions of Engineer-in-charge. (Rate includes shop drawings for foundation, structural steel, canopy, cost of fabric including forming, cutting, fabrication, hot weld stich of fabric transport to the site, sembling and installation with GI caules, hardware, luminium flot. EPDM gasket and required accessories wherever required complete including lilis up to all heights, tools and plants, and necessary caffolding etc. required for all operations in all respect) Supporting structural steel frame and RCC foundation shall be paid separately. The minimum technical requirements/specifications are as below Membrane shall be PVC/ PVDF coated with following Characteristics; Yarn High Tenacity Polyester 1100 Dtex Surface Treatment: S2PVDF Top Coat/Back PVDF Coated fabric Weight: 950 g/m² EN ISO 2286-2 Width 267 cm Tensile Strength Warp Weft:4200/4000N/5cm-EN ISO 1421 Tear Strength Warp/ Welt
580
4929
2859371
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm [dsr 2023 15.23.1]
2150
56
120400
... More
Wiring point for exhaust fan with 2.5 sq. mm. PVC insulated single core aluminium conductor cable in heavy guage rigid PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 8 SWG GI earth continuity wire, GP Box, 15A piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc, 5 complete in all respect including matching colour wash. [SN 144 C)
10
993
9930
... More
Supply,erection testing and commissioning of OFF Grid Solar PV Power Plants of 50KW including comprehensive warranty maintenance for 05 years approved by E/I [Load 50 KW(50*137280)
50
137280
6864000
... More
Filter Media (Fine and coarse media)
2400
30
72000
... More
Wiring Point for plug with 1.5 sq. mm. PVC insulated single core aluminium conductor cable in heavy guage rigid PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 8 SWG GI earth continuity wire, GP Box & piano type switch and socket etc, complete in all respect including matching colour wash.[SN.141 C]
10
327
3270
... More
Wiring point for H.P.M.V./ Sodium Vapour lamp with 2.5 sq. mm. PVC insulated single core aluminium conductor cable in heavy guage rigid PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 8 SWG GI earth continuity wire, GP Box and 15 A piano type switch etc., complete in all respect includingmatching colour wash. [SN143C]
4
925
3700
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements