Bulandshahr Development Authority Tender

R.C.C. work with Cement approved coarse sand and 2 cm.(3/4") gauge approved stone ballast in the proportions of 1:1.5:3 in beam excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W. G.G.I., binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T & P etc. required for proper completion of the work. Excluding cost of Binding wire.(sor S.I No- 285A) 2022

R.C.C. work with Cement approved coarse sand and 2 cm.(3/4") gauge approved stone ballast in the proportions of 1:1.5:3 in n R.C.C. Raft foundation and footing with 2 cm. gauge stone ballast. excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W. G.G.I., binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T & P etc. required for proper completion of the work. Excluding cost of Binding wire.[S.I.No-287(a)+Diff. cost of 4 cm/2cm stone ballast]/2022

R.C.C. work with Cement approved coarse sand and 2 cm.(3/4") gauge approved stone ballast in the proportions of 1:1.5:3 in column/wall excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W. G.G.I., binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T & P etc. required for proper completion of the work. Excluding cost of Binding wire.(sor S.I No- 289) 2022

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, and making curvature (wherever required) and fitting the same with polishing necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in￾charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). dsr 2023 [10.28]

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: dsr 2023 [11.53]

First class Brick Work in 1:4 one cement & four Coarse sand of 2.20 F.M. mortar.in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. [305a]2022

Cement Concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. [279a-2022]

12 mm thick cement plaster with cement and coarse sand mortar in 1:4 over brickwork minimum thickness not to be less than 1 cm. including supply of all material, Labour T&P etc. required for proper completion of work. (13:11- 584 new item,) 2022

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. dsr2023 [11.56.1]

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.dsr 2023 [10.16.2]

Extra for pre finished nosing to treads of steps of marble stone [DSR-11.24]/2023

S/F Sculpture of 5.5ft height FRP Matriel with coloured by best quality paint including all work complete [As per directed by E/I]

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.dsr 2023 [ 23.6]

Mild steel (Tor steel or plain) or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised overlapping shall be measured up to floor two level. (DSR 5.22.1/2021) )

P/L 110 mm dia pvc pipe in 6 kg

P/L 75 mm dia pvc pipe in 6 kg

Providing and fixing water proofing light 9 watt as per direction of Engineer-in-charge.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core [S.N.(501i)-(507)/2018]

3D Logo of Size 4 fitX4fit with acrelic sheet/FRP Sheet.

Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet , face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type III of ASTM - D - 4956-01 as approved by Engineer - in - charge , letters , borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade , pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM - D - 4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys , rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures , including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including . appropriate priming coat . The rate includes the cost of rounding off the corners , lowering down the structural frame work from the gantry , fixing and erecting the same in position all complete as per drawings , specification and direction of the engineer - in - charge . ( Structural frame work including M.S. plate to be provided separately . Rectangular area of the sheet only shall be measured for payment ). [DSR-2023/16.60.1]

Brief history writing work on granite stone of size 1200*750 mm as per given details and direction by E/I.