Bulandshahr Development Authority Tender

R.C.C. work with cement, approved coarse sand and 20mm gauge stone grit in proportion of 1 :1.5 :3 in R.C.C. Column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24B.W.G.G.I. binding wire and necessary centering and shuttering etc and also including supply of all materials labour & T&P etc. Excluding cost of Binding wire. [S.I. No. 289]-2022

R.C.C. work with cement, approved coarse sand and 20mm gauge stone grit in proportion of 1 :1.5 :3 in R.C.C. lighter beam excluding supply of reinforcement and its bending but including its fixing and binding the same with 24B.W.G.G.I. binding wire and necessary centering and shuttering etc and also including supply of all materials labour & T&P etc. Excluding cost of Binding wire. [S.I. No. 285A]-2022

First class Brick Work in 1:6 cement & course sand 2.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. [SI.No.-303A] SOR-2022

Earthwork in cutting or in embankment in ordinary soil, excavation to be done in regular pits not exceeding 0.50 M in depth and earthwork in embankment to be in 20 cm layers including ramming and dressing the surface to required levels and slopes and also including 1.50 M lift and 30 M lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 50 M distance and landscaping and including cartage of earth from 8 km. distance and including loading, unloading and royalty of earth charges etc. required for proper completion of the work as directed by E/I. [A.R]

First class Brick Work in in 1:4 one cement & four Coarse sand of 2.20 F.M. mortar in superstructure for half brick thick wall including necessary Cutting & moulding of brick but for walls of one brick thick including supply of all materials, labour and T&P etc. requried for proper completion of the work. UPPWD SOR 2022 SI.No.[305(a)+309+310(a)]

First class Brick Work in in 1:6 one cement & four Coarse sand of 2.20 F.M. mortar in superstructure for one brick wall including necessary Cutting & moulding of brick but for walls of one brick thick including supply of all materials, labour and T&P etc. requried for proper completion of the work. UPPWD SOR 2022 SI.No.[303(a)+309+310]

R.C.C. work with Cement approved coarse sand and 2 cm.(3/4") gauge approved stone ballast in the proportions of 1 : 1½ : 3 in lintels for doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W. G.G.I., binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T & P etc. required for proper completion of the work. Excluding cost of Binding wire. ([ S.I. No. 283(a)] /2022

RCC work with cement approved coarse sand and 2 cm gauge approved stone grit in proportions of 1 : 1½ : 3 in slab & T-Beam excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI binding wire including centering and shuttering etc. all materials labour, Tools & Plants etc. required for proper completion of the work including cost of binding wire the rates excludes making of drip course which shall be paid extra. ([ S.I. No. 284] New/2022

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars [DSR 2023, 5.22.1]

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. (S.I. No. 11.14(a,b,c,d,& e)/2022

12 mm thick plaster with cement and COURSE sand of 2.25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. [SI.No.-584 NEW ITEM] SOR-2022

Cement Concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 3:1.5:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. [SI.No.-279B] SOR-2022

Providing and laying vitrified floor tiles 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. UPPWD SOR 2022 14.26(b) New Item

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (S.O.R. : 14.30(b)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.). [DSR 2023/ 10.28]

Renewing panes of glass in door, windows & ventilators or fixing in the new work with 5 mm thick glass panes fixed with brads & putty including supply of all materials, labours, tools & plants,required for proper completion of work. SOR 2020, SI No 806+Diff. Cost of Glass thicknes

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. dsr2023 [11.56]

Extra for pre finished nosing to treads of steps of marble stone [DSR-11.24]/2023

Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats. [SI No : 15.26 (New Item.)]

Finishing wall with weather coat by premium acrylic exterior paint applied @ 1.67 ltr/10 sqm (Asian or Berger Brand) of approved make and quality on wall with two or more coat to give an even shade including a priming coat with cement primer of approved brand and manufacturer exterior primer applied @ 2.20kg/10 sqm after thoroughly brushing the surface free from mortar dropping and other foreign matters and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (S.I. No. : 662 (New Items 15.23)2022

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. [DSR 8.31/2023]

Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet , face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type III of ASTM - D - 4956-01 as approved by Engineer - in - charge , letters , borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade , pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM - D - 4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys , rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures , including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including . appropriate priming coat . The rate includes the cost of rounding off the corners , lowering down the structural frame work from the gantry , fixing and erecting the same in position all complete as per drawings , specification and direction of the engineer - in - charge . ( Structural frame work including M.S. plate to be provided separately . Rectangular area of the sheet only shall be measured for payment ). [DSR-2023/16.60.1]

Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash. [SI NO.-140(C)]

Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid P.V.C. conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with14 SWG copper earth continuity wire and piano type switch and socket etc., complete in all respect including matching colour wash. [SI NO.-141(c)]

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid P.V.C. conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash. [SI NO.-138(C)]

Wiring point for H.P.M.V./ Sodium Vapour lamp with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid P.V.C. conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire and 15 A piano type switch etc.,complete in all respect including matching colour wash. [SI NO.-143(C)]

S/F of 10 walt surface light [SOR-1402]

Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect. CAT.- A SOR E 1413(A)

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve

S&F of 40 Amp. D.P. Isolator CAT.-A [SOR-2018/1005A]

S&F surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT.-A [SOR-2018/1022A]

Supply and wiring of submains with 2 nos. 2.5 sq mm & with 1 no earth wire of 1.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge. [SOR/2018/291]

Supply and fixing of 80 mm thick gray colour precast cement concrete I shape interlocking paver blocks with top layer of minimum 8 mm thickness having plan dimension 200 ( 160 + 120 ) of op . cement , smooth high gloss finish , skid resistant , manufactured from rubber moulds through vibro compression mechanism the compressive strength of concrete paver block shall not be less than 40 mpa ( M - 40 ) and weight 5kg per no . confirming to is : 15658-2006 and also including leveling and dressing of surface up to required levels and slopes , fiting joints with local sand , including cost of material . labour , T & Petc . required for proper compition of the work as directed by engineer incharge [ AR ]

Painting or varnishing work in small areas or new wood work with one coat upto but for every coat her first coat of approved superior quality ready mixed paint or varmish including supply of all materials , labour , Tools & plants etc. required for proper completion of the work , Paint to be used should confirm the ISI no . 103-1950 . [6410-642]2022

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie, rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required for completion of work. UPPWD SOR 2022 SI No. 502