Bulandshahr Development Authority Tender

Providing and laying in position ready mixed M-35 grade concrete for reinforced cement concrete work, using fly ash and cement content as per approved design mix, and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. NOTE- (1) Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. (2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS : 456. Uniform blending with cement to be ensured in accordance with clauses 5.2 and 5.2.1 of IS:456 -2000 in the items of BMC and RMC All works up to Plinth level. [DAR-5.40.1+5.34.2]/2019

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars [DSR 2019, 5.22.1]

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete [DSR 2019, 5.9.1]/2019

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. [DSR 2019, 5.9.2]/2019

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. [DSR 2019, 5.9.3]/2019

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. [DSR 2019, 5.9.5]/2019

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) [DSR 2019, 5.11.1]

M-150 class brickwork in 1: 6 one cement and six coarse sand mortar in foundation and plinths including supply of all materials, labour and T & P etc. required for proper completion of the work. [S.I. No. - 303+Diff. in cost fo C.Sand & F. Sand]

M-150 Brick Work in 1:4 (one cement & Four coarse sand) mortar in superstructure including necessary cutting and moulding of bricks as required thickness of walls not to be less than one brick includind supply of all materials, Labour, T&P etc. required for proper completion of the work. [SI.No.305a+309+310]2020

12 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand). [DSR 2020, 13.4.1]

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. [DAR 2019, 10.2]

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: [DAR 2019, 11.53]

Providing Wall Putty on New Surface with approved quality material of Berger/J.K./Birla or similar make 2 coats. [SI No. New Item] SOR 2020

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) [DAR 2019, 13.47.1]

Retro Reflective Signboard made up of 2 mm thick aluminium sheet, face to be fully covered with 3M high intensity prismatic reflective sheeting series 3930, letters/ simbols shall be made of same Retro Reflective sheeting and computer cut as per colour required, Boards are to be supplied alongwith back support frae of MS angle size 35 x 35 x 5 mm and back side of aluminium sheet shall be painted with stove enamel paint. With 7 years warranty. Rates include design, fabrication, supply, transporation and erection of the signage structure royalty, VAT etc. all T&P/machine material and labour required for proper completion of the work. Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination for complete structure. [U.P.,PWD 2016 NEW ITEM-5] {Rate : 7700 x 0.4% = 7392.00] Deduct for 4% VAT

Construction of granular sub base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing with mix in place method with rotavator at OMC and compacting with smooth wheel rooler to achieve desired density complete as per technical cpecification clause 401. [A.R.]

Supply and fixing of 80 mm thick grey colour precast cement concrete I shape Interlocking paver blocks with top layer of minimum 8 mm thickness having plan dimension 200 x (160+120mm) of O.P. cement, smooth high gloss finish, skid resistant, manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 40 Mpa (M-40) and weight 5 Kg. per No. confirming to IS : 15658-2006 and also including levelling and dressing of surface upto required levels and slopes, filling joints with local sand, including cost of material, labour, T&P etc. required for proper completion of the work as directed by Engineer-in-charge. [A.R.]

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces [DSR 2020, 10.5.1]

Painting or varnishing work in small areas or new work with one coat (upto one sqm) of ready mixed paint and two coat of approved superiour quality ready mixed paint including supply of all Materials,labour,tools & plants etc. required for proper completion of the work.Paint to be used should confirm the ISI no.103-1950. [SI No.641+642]2020

Providing and laying at or near ground level factory made kerb stone of size 0.375 x 0.20 M of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin-charge). [Based on DSR-16.69/2018]

[ELECTRIC WORK]

Wiring point for light with 1.5 sqmm. F.R. PVC insulated mutli strand single core copper conductor cable in PVC heavy gauge rigid conduit pipe partly concealed in wall and partly laid in slab alomgwith the reinforcement before concreting, complete with 1.5 sqmm F.R. PVC insulated mutli strand copper conductor cable as Earth Piano type switch and ceilling rose/angle/batten holder on 3mm thick phenolic laminated backlite sheet etc. complete in all respect as directed including matching colour wash. [S.I. No-138 (C)]

Wiring point for Fan/Fresh air Fan / Light duty exhaust fan with 1.5 sqmm. F.R. PVC insulated mutli strand single core copper cable conductor in heavy duty PVC heavy gauge rigid conduit pipe partly concealed in wall and partly laid in slab alomgwith the reinforcement before concreting, complete with 1.5 sqmm F.R. PVC insulated mutli strand copper conductor cable as Earth Piano type switch and ceilling rose/angle/batten holder on 3mm thick phenolic laminated backlite sheet etc. complete in all respect as directed including matching colour wash. [S.I. No-140(C)]

Wire point for HPMV/Power plug with 1.5 sqmm FRLSH PVC insulated multi strand copper cunductor cable as earth wire drawn in side the conduit pipe concealed in the wall complete and partly laid in slab alongwith the reinforcement before concreting copmlete with 14 SWG GI earth continuity wire, 15 Amp. piano type switch and scoket on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect. as directed i/c matching colour wash (S.I. No 143C]

Supply and wiring of submain with two number 4 sq. mm. PVC insulated 1100 V grade single core aluminium conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one no. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc. complete in all respect. [S.I. No-221(C)]