Bulandshahr Development Authority Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Bulandshahr Development Authority Tender
Energy, Oil and Gas
Eprocure
Opening Date18 Mar 2025
Closing Date14 Apr 2025
Tender Amount₹ 4,86,43,000
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
The class eligibility requirements for bidders are Category-A, Category-B, Category-C, and Category-D.
Technical Capacity
... View More
The bidder should have at least four years of experience in the organized sector. For work more than Rs. 200.00 lacs, the bidder should have either two similar completed works aggregating to the bid value, or one similar completed work costing not less than 80% of the bid value. For work more than Rs. 25.00 lacs & up to Rs. 200.00 lacs, the bidder should have either three similar completed works aggregating to the bid value (with at least one work being 50% of the bid value), or one similar completed work costing not less than 80% of the bid value. The bidder is required to submit a list of similar works satisfactorily completed along with certificates, including details such as total number of certificates attached, name of work, amount of work done till date, actual date of completion or proposed date of completion.
Costs
EMD
₹ 9,73,000Document Cost
₹ 3,540Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_BDAB_1018723_3Tender No
4837/BKDA/2024-25 Dt.12-03-2025 TBTender Authority
Bulandshahr Development Authority ViewPurchaser Address
-Website
http://http://bdabulandshahar.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
52
6100
317200
... More
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). Note: Truck Mounted rotary/TMR/Tubewell boring machine shall not be used . 500 mm dia piles
420
2042
857640
... More
REINFORCEMENT CEMENT CONCRETE
-
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland /portland Slag cement, admixtures in recommended proportions as per iS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
All works upto plinth level Up to Plinth Lvl. concrete of M25 grade with minimum cement content of 330 kg /cum
83
7181
596023
... More
All works above plinth level upto floor V level concrete of M25 grade with minimum cement content of 330 kg /cum
156
7450
1162200
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
72
296
21312
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
228
726
165528
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick
391
636
248676
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
628
777
487956
... More
REINFORCEMENT WORK
-
-
-
... More
Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade FE-550D (Make:-Tata or Sail)
535
8149
4359715
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
160
583
93280
... More
BRICK WORK
-
-
-
... More
First class Brick Work in 1:4 cement & Coarse sand. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work.
18
5170
93060
... More
First class Brick Work in 1:4 cement & Coarse sand. mortar in superstructure including necessary Cutting & moulding of brick as required thickness owalls not to be less than 1½ brick. Add extra labour to above items.
159
5580
887220
... More
Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100 mm/ 125 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
7
7703
53921
... More
6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.
628
227
142556
... More
Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats.
2662
90
239580
... More
Finishing wall with weather coat by premium acrylic exterior paint applied @ 3.28 ltr/10 sqm (Asian or Berger Brand) of approved make and quality on wall with two or more coat to give an even shade including a priming coat with cement primer of approved brand and manufacturer exterior primer applied @ 2.20kg/10 sqm after thoroughly brushing the surface free from mortar dropping and other foreign matters and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
671
140
93940
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
1991
90
179190
... More
FLOORING WORK
-
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (Granite work)
4
386
1544
... More
Supply and fixing of Kota stone in flooring 25 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 20 mm base coat (bedding) of 1:4 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work
402
1450
582900
... More
Supply and fixing 20 mm thick Kota stone tiles in riser of steps, skirting, dado & Pillars laid on 12mm (Avg) thick morter in with 1:3
cement and approved coarse sand morter & jointed with gray cement slurry mixed with pigment to match the shade of slab finished with rubbing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
61
1750
106750
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
49
1250
61250
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm
8
1275
10200
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm includingngrouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm
21
1106
23226
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundybottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
89
958
85262
... More
DOOR AND WINDOW
-
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 50 x 100 mm
52
716
37232
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick
20
3284
65680
... More
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The frame shall be filled with mineral wool Insulation having density minimum 96Kg/sqm . The frame will have a provision of G.I. anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with factory made template for SS ball bearing hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- Charge . (Cost of SS ball bearing hinges is excluded).
27
1664
44928
... More
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes Fire rating conforming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/sqm) duly filled mineral wool insulation having density minimum 96 kg/cum and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-Charge (panelling to be paid for seperately).
20
9080
181600
... More
As above item no. 473 Aluminium Fittings ISI marked.
40
600
24000
... More
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds
-
-
-
... More
Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m).
63
6648
418824
... More
Fixed window / ventilator without mullion / transom. Using R1 series with frame (33mm & above ) x (35mm & above). (Height upto 0.90 metre)
1
6231
6231
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
63
1137
71631
... More
ROOF WORK
-
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
310
1330
412300
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
75
230
17250
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
2
225
450
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. 110 mm diameter
15
285
4275
... More
PART-B PLUMBING WORK
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
3
4923
14769
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
1
5113
5113
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P.brass pillar tap
3
1682
5046
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia
5
90
450
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
9
40
360
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
... More
100 mm nominal dia Pipes
50
2472
123600
... More
150 mm nominal dia Pipes
20
5155
103100
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
20 mm dia (iner fitting)
60
406
24360
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
-
-
-
... More
32mm dia (outer fitting)
40
391
15640
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality {screwed end):. 32mm dia
-
-
-
... More
32mm dia
3
521
1563
... More
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
3
266
798
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
3
620
1860
... More
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
3
266
798
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
5
8207
41035
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
2045
6135
... More
Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2000
8
16000
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (ofapproved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
3
1214
3642
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore
4
248
992
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
-
-
-
... More
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
2
9121
18242
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
3
84
252
... More
PART-C FENCING WORK
-
-
-
... More
EXCAVATION WORK
-
-
-
... More
Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplusearth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine can not reach/move).
52
110
5720
... More
PCC WORK
-
-
-
... More
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
9
6100
54900
... More
REINFORCEMENT CEMENT CONCRETE
-
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland /portland Slag cement, admixtures in recommended proportions as per iS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
All works upto plinth level Up to Plinth Lvl. concrete of M25 grade with minimum cement content of 330 kg /cum
35
7181
251335
... More
All works above plinth level upto floor V level concrete of M25 grade with minimum cement content of 330 kg /cum
4
7450
29800
... More
SHUTTERING
-
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
75
296
22200
... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
42
636
26712
... More
REINFORCEMENT & MS WORK
-
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-550D (Make Tata or Sail)
49
8149
399301
... More
M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work.
3600
85
306000
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm
360
769
276840
... More
Painting or varnishing (Two Coat )with valsper or other approved high grade enamel or superior synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm ISI no. 105/106/133-1950.
720
85
61200
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
54
1162
62748
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.
54
1140
61560
... More
PART-D SEWER WORK
-
-
-
... More
Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplusearth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine can not reach/move).
72
110
7920
... More
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
4
6100
24400
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With Sewer bricks conforming to IS : 4885
5
9520
47600
... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m With Sewer bricks conforming IS : 4885
2
5628
11256
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
16
270
4320
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
13
418
5434
... More
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/ spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 450 mm dia RCC pipes.
50
2022
101100
... More
PART-E INTERNAL ELECTRICAL WORK
-
-
-
... More
S & F surface/Flush mounting 12 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A
1
7740
7740
... More
Supply and wiring of submain with two number 6 Sq.mm FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with one number 14 SWG copper earth continuity wir etc. complete in all respect.
200
263
52600
... More
Wiring point for light in 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit concealed in the wall as earthwire drawn inside the conduit and 5 Amp. Flush type switch & ceiling rose/angle/Batten holder fixed with 3mm thick phenolic laminated Backelite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in Charge.
30
643
19290
... More
Add for light points with modular type switch in place of piano type switch.
30
44
1320
... More
Wiring point for fan with 1.5 sqmm. P.V.C. insulatled single core copper conductor cable in heavy gauge rigid P.V.C. conduit pipe partially laid in slab and partlly conceled in wall complete with 8 SWG GI earth continuity wire, piano type switch and ceiling rose on 3 mm thick phenolic laminated Backlite sheet etc complete in all respect, including matching colour wash.
20
708
14160
... More
Add for fan points with modular type switch in place of piano type switch.
20
44
880
... More
Wiring point for plug with 1.5 sqmm. FRLSH P.V.C. insulatled multistrand core copper conductor cable as earthwire drawn in the conduit complete with 14 SWG copper earth continuity wire, GP box piano type switch and socket etc. complete in all respect including matching colour wash.
20
335
6700
... More
Add for plug points with modular type switch and socket in place of piano type switch and socket
20
83
1660
... More
Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175 mm x 100 mm x 50 mm size with phenolic laminated Bakelite sheet cover 3mm thick fixed brass machine screw and cup washer.
20
340
6800
... More
Supply and wiring of submain with two number 4 sq. mm FRLSH P.V.C. insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty 2mm thick PVC conduit partly concled in wall and partly laid in slab along with Reinforcement before concreting with one no. 14 SWG GI earth contunity wire including colour wash etc. Completed in all Respects.
100
231
23100
... More
Supply and wiring of submain with two number 2.5 sq. mm FR P.V.C. insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty 2mm thick PVC conduit partly concled in wall and partly laid in slab along with Reinforcement before concreting with one no. 14 SWG GI earth contunity wire including colour wash etc. Completed in all Respects.
200
149
29800
... More
Supply and fixing of recess/Surface/Pendent mounting round 10 Watt 15 Watt LED Down Lighter having Power coated die, cast aluminium housing with heat sink, diffuser/Reflector and driver set comlete in all respect. CAT- AAA
50
1350
67500
... More
Wiring point for call-bell with 1.5 sqmm. P.V.C. insulatled single core copper conductor cable in heavy gauge rigid P.V.C. conduit pipe partially laind in slap and partlly conceled in wall complete with 8 SWG GI earth continuity wire, piano type switch a
30
785
23550
... More
Add for call bell point with modular type bell push in place piano type bell push
30
80
2400
... More
PART-F ELECTRICAL WORK
-
-
-
... More
5 MVA 33/11 KV Power Transformer Three phase CRGO cooper wound as per UPPCL Stock
2
5651027
11302054.4
... More
33KV Isolators (630 Amps), with clamps
2
39975
79951.36
... More
33 KV VCB, 36 KV, 630A with 1000 MVA (16 KA for 1 second) rupturing capacity VCB for out door use.
2
402718
805436.78
... More
33 KV C&R panel 24 V DC Operated suitable for controlling of one T/F (With Differential protection, master relay & 10 window auxre relay)
2
112172
224345.94
... More
Battery Charger 24Volt
1
27666
27666.86
... More
Battery Set 24Volt
1
62083
62083.81
... More
33KV Lightening Arrestor Sub-Stn Type 30KV 10KA with surge counter.
9
32388
291496.23
... More
33KV CTs 400-200/5-5-5-5 A with Junction Box
6
29862
179173.2
... More
33KV CTs 200-100/5-5-5-5 A with Junction Box
6
29862
179173.2
... More
33KV PTs with junction box
3
82604
247813.23
... More
33KV Post insulators
10
1621
16211
... More
11KV Disc insulators 45KN T & C Type
54
244
13188.96
... More
Disc Fitting (T&C Type)
18
225
4060.62
... More
11KV 8 panel board 24V DC operated with 1 No. I/C panel
2
409324
818649.84
... More
11KV 8 panel board 24V DC operated with 6 No. O/G Panel and 1 No. Capcitor Control Panel
12
349263
4191167.76
... More
11KV Buscoupler
1
352384
352384.07
... More
11KV Lightening Arrestor Sub-Stn type 10KA (heavy duty)
6
33279
199677.96
... More
11KV NCTs 600/5A
2
33279
66559.32
... More
LT Distribution board for 33KV Sub-Stn
1
2321
2321.19
... More
11 kV automatically Switched Capacitorbank 1.8 MVAR, (with isolator, structure and all allied material )
2
3887455
7774911.86
... More
Structure for 33 KV CT Wt. 87.62 Kg
6
18691
112148.52
... More
Structure for 33 KV PTs Wt. 87.62 Kg
3
18691
56074.26
... More
Structure for 33 KV LA Wt. 76.38 Kg
9
17418
156770.73
... More
Structure for 33 KV Post Insulators Wt. 76.38 Kg
10
17418
174189.7
... More
Structure for 33 KV Isolator Wt. 288.36 Kg
2
42705
85411.28
... More
Structure for L&E Switch Wt. 288.36 Kg
1
42705
42705.64
... More
Structure for 11 KV NCT Wt. 92.37 Kg
2
17614
35229.46
... More
Galvanised Gantry Towers - 2xDB-2, 2xDT-2, 2xDT-3 per s/stn
3100
232
721246
... More
ACSR Conductor 0.2 sq in(Panther)
450
528
237955.5
... More
11KV Single core XLPE cable 300mm2 for Incoming Feeder
480
1611
773654.4
... More
S/C 300 mm Sq. cable Termination Kit indoor
4
6911
27645.44
... More
S/C 300 mm Sq. cable Termination Kit outdoor
6
7408
44449.32
... More
11KV 3 core XLPE cable 185mm2 for O/G Feeders
750
1208
906382.5
... More
11KV 3 core XLPE cable 300 mm2 for capacitor bank
240
1611
386827.2
... More
11KV 3 core XLPE cable 70mm2 for S/Stn T/F.
40
772
30889.6
... More
3/Cx185MM Sq. outdoor Heat shrinkable Termination Kit for O/G
12
6720
80643
... More
3/Cx300 MM Sq. outdoor Heat shrinkable cable box for capacitor
2
7408
14816.44
... More
3/Cx300 MM Sq. indoor Heat shrinkable cable box for capacitor
2
6911
13822.72
... More
LT PVC cable 2C X 10 mm2 for yard light
500
168
84485
... More
un armoured Copper control cable 2C X 4mm2
1000
188
188500
... More
un armoured Copper control cable 2C X 6mm2
200
267
53586
... More
un armoured Copper control cable 3C X 4mm2
500
268
134305
... More
un armoured Copper control cable4C X 4mm2
600
327
196308
... More
un armoured Copper control cable6C X 4mm2
300
463
138948
... More
un armoured Copper control cable 7C X 2.5mm2
400
385
154296
... More
un armoured Copper control cable 10C X 2.5mm2
300
556
167022
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
Upto 35 sq. mm
3800
29
110922
... More
MS Channel galvanised of various size
1000
200
200610
... More
MS Angle Iron galvanised 50 X 50 X 6 mm
600
200
120366
... More
MS Flat galvanised 50 X 6 mm
1000
200
200610
... More
MS Flat 75x8 MM for Earth mat in switch yard
3700
200
742257
... More
Switch yard illumination system
-
-
-
... More
Supply & fixing of 8mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.
5
25400
127000
... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. CAT- AAA
5
8126
40634
... More
Fire Fighting/Safety eqpt for Control room
-
-
-
... More
Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
3
9100
27300
... More
Supply and fixing of C02 type fire extinguisher 6.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
3
19900
59700
... More
Fire Fighting/Safety eqpt for yard
-
-
-
... More
Supply and fixing of fire extinguisher, ABC Type 9.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
2
11100
22200
... More
CO2 type Fire extinguisher 22.5 Kgs
2
30389
60779.66
... More
Fire Buckets (capacity) - 10 Ltrs
12
645
7746.48
... More
100mm dia ISI marked GI Pipe with clamps
12
1691
20295
... More
11 KV 400 Amps. GO Switch complete with handle, pipe & Sporting channel
5
9808
49043.2
... More
11 KV LA type 9 KV Heavy Duty
10
5414
54142
... More
Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect.
16
5380
86080
... More
Earthing Rod Wt. 6.175 Kg
24
2027
48665.28
... More
G.I. Pipe 40 mm dia 6 mtr. Long for earthing
12
3184
38209.92
... More
Premier Insulating Mat - "B Class" as per IS 15652:2006
40
984
39385.6
... More
1 No. Table, 4 No. Chair, Wall clock, Safety Charts, Safety Tool Kit & Medical Kit, earth stick-1
1
55728
55728.75
... More
PG Clamps for Panther conductor
52
976
50780.6
... More
MS Nuts & Bolts off size
300
165
49689
... More
GI nuts & bolts off size
40
171
6872.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%