Bulandshahr Development Authority Tender

Retro-ReflectiveSheeting type-IV with 4 mm thick ACM Single Side Providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC-67:2012 retro reflective sheeting with back frame MS angle of 35x35x5 mm. Legends, letters, numerals and borders etc should be as per MoRTH specification No-801.3.7 The sheeting shall have a pressure - sensitive adhesive of the aggressive - tack type requiring no heat, solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting. Micro prismatic type IV Retro reflective sheeting confirming to ASTM D4956-09 shall be Pressure fixed. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be (pour T , ira sportat ten inetalion and inal entail all materias. per direction of the Engineer-in-Charge. SOR- 22.1 Morth 801

Supply & Fixing of built up overhead structure 30.00 to 32.00M span comprising to three vertical posts of 6.00m height made up of 350mm NB. Heavy class MS Pipe as vertical member welded with 12 mm M.S. Plate (1.00 x 1.00m) at top &(1.20 x 1.20m) at bottom for bearing of horizontal frame comprising of 65mm N. B. havey class main pipe and of 40mm N.B. meadium class bracing pipe as per approved design and drawing with one coat of stell primer and two coats of synthetic enamel etc complete as per direction of Engineer-In-Charge. LDA Approved

Supply & fixing & built up over head structure 12mtr.15mtr span comprising of three vertical posts of 6.00M height made up of 300mm NB heavy class MS pipe as vertical member welded with 10mm MS plate at top and 12mm MS plate at bottom. The horizontal true shall comprise of 500mm dia. Heavy class MS pipe and 40mm dia heavy MS Pipe as bracing & 10mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and 2 coats of synthetic enamel paint, the work includes construction of RCC foundation of size 90x 90cm of required depth as per site condition for built up structure including earth work in excavation 100mm thick lean concrete in 1:$:8 (cement, coarse ssand &40mm guage stone ballast)RCC with and 1:2:4 (Cement coarse fixing of 20mm grit) including supply and fixing of 20mm dia foundation bolts 600mm long as per provision of structure design including cost of rinforcement and shuttering, the lateral vertical clearances & complete installation work shall be as per relevant clauses of MORTH &H specification section 800 &IRC 672010 complete in all respect the rate shall include cost of design fabrication supply transportation, local shifting erection of signage structure using crane, inclusive of all taxes. royalty, vat etc all T&P machine material and labour required for proper completion of work as per, direction of engineer in charge. PWD SOR-2022 morth-801