Bharat Sanchar Nigam Limited Tender

SITC of diesel EA set , Supply Installation testing and Commissioning of factory assembled factory tested diesel engine alternator set with an acoustic enclosure conforming to the Environment Protection Act 1986 and Environment Protection Rules 1986 latest as amended upto date for noise and emission norms and the latest CPCB Norms CPCB IV compliant as and when amended by Ministry of Environment and Forest Capable of delivering not less than 180KVA 144KW at typical site conditions including all accessories like common base frame, AVMs Starting Batteries of low maintenance type suitable for cranking duty and capacity not less than 180AH for 12V or 24V DC system or manufacturer recommended AH in case the battery is same make as that of Engine and supplied by the Engine manufacturer only with leads and terminals including battery charging dynamo residential type silencer and suitable Exhaust piping up to slencer with supports 900 liters fuel tank with braided flexible fuel piping and MS piping B class wherever required of suitable size etc with valves and other fittings for supply and return lines hand fuel transfer pump with suitable hose pipes and clips with suitable manual control panel and comprising the following as per the detailed specifications General Technical requirement GTR Commissioning Installation details and warranty details as attached complete as required The agency seller has to carry out associated work as per General Technical Requirement attached as part of their scope of work without any extra cost for these works like construction of PCC Foundation for DG set of required size Providing making earthing system 02 Copper Plate earth for Body and 02 Copper Plate earth for Neutral and necessary connections supplying laying Power Cable 3.5 core 240 sqmm size of 10 mtr length in the ground as per current rating etc as required. For ITC OF 180 KVA Earthing End Termination and Sply and laying of cable kindly refer detailed specification a b c d e f g h and i of this item.

Supply and Lying on existing cable tray , Supply and Laying on existing cable tray of 1 No. cable of ISI marked heavy duty PVC insulated, armoured cable, with PVC outer Sheath of Type ST 2 ,FR Grade, Category C1, with aluminum conductor having insulation of PVC compound type C, suitable for rated voltage up to and including 1100 volts and conforming to IS 1554 Part 1, latest. For 3 Phase Power Generators, 3.5 core x 240 sqmm size complete as required. Note This shall be extra length of LT Cable required for connecting DG Set supply to existing MV Panel ,over and above the Length of LT Cable to be supplied by Seller as per GTR details given.

Supply and Lying on surface of armoured cable , Supply and Laying on surface of 1 No. cable of ISI marked heavy duty PVC insulated, armoured cable, with PVC outer Sheath of Type ST 2, FR Grade, Category C1, with aluminum conductor having insulation of PVC compound type C, suitable for rated voltage up to and including 1100 volts and conforming to IS 1554 Part 1, latest. For 3 Phase Power Generators, 3.5 core x 240 sqmm size complete as required. Note This shall be extra length of LT Cable required for connecting DG Set supply to existing MV Panel ,over and above the Length of LT Cable to be supplied by Seller as per GTR details given.