Bareilly Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Bareilly Development Authority - BDA Tender
Civil And Construction
Building Construction
Eprocure
Opening Date11 Jan 2025
Closing Date10 Feb 2025
Tender Amount₹ 22,73,69,194
Costs
EMD
₹ 45,48,000Document Cost
₹ 30,000Tender Fee
Refer Documents
Summary
Construction Work Of Library In Sector 8 Under Social And Cultural Amenities In
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_BDAUP_992516_1Tender No
T-01/2025/02Tender Authority
Bareilly Development Authority ViewPurchaser Address
-Website
http://http://www.bdainfo.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered):
Depth not exceeding 1.5 m
D.S.R. Item No. 2.20.3
450
73
33093
... More
Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered):
Depth exceeding 1.5 m but not exceeding 3 m
D.S.R. Item No. 2.20.2
300
61
18513
... More
Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.8 ( Rate: 6812.00x0.735x109/107)+1%=5151.41
360
5151
1854507.6
... More
Providing and fixing APP (Atactic Polypropylene Polymer) modified
prefabricated five layer 2 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrance manufacture of density at 25°C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane.
2mm (for corrugated roof sheets)
D.S.R. 14.89.1
4862.55
376
1832500.59
... More
C.C. 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.3 ( Rate: 7878.50x0.735x109/107)+1%=5957.92
171.88
5957
1024047.29
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriagefor all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
Concrete of M25 grade with minimum cement content of 350 kg /cum All works upto plinth level RCC as in fdns and footings of colums and plinth beam and bases of column. DSR Item No. 5.33.1.1 (Rate: 9504.75x0.735x109/107)+1%=7187.74
2254.69
7187
16206125.5
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum (level 1 to lvl-5) D.S.R. Item No. 5.33.2.1 ( Rate: 9860.40x0.735x109/107)+1%=7456.69
2605.7
7456
19429897.13
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal
size derived from natural sources)..
DSR Item No. 4.2.2
192.21
7832
1505513.66
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage and over lapping and hooks and authorised overlapping shall be measured . D.S.R. Item No. 5.22.1 ( Rate: 107.10x0.735x109/107)+1%=80.99
595873.29
80
48259777.76
... More
Centering and shuttering including strutting, propping etc. and removal of form for footings/PB, rough finished surface of conc. D.S.R. Item No. 5.9.1 ( Rate: 392.15x0.735x109/107)+1%=296.55
218.88
296
64908.86
... More
Centering and shuttering including strutting, propping etc. and removal of form for columns, pillers, piesr, abutment , post and struts
D.S.R. Item No. 5.9.6 ( Rate: 961.30x0.735x109/107)+1%=726.96)
3324.6
726
2416851.22
... More
Centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers
D.S.R. Item No. 5.9.5 ( Rate: 736.40x0.735x109/107)+1%=556.88)
4105.1
556
2286048.09
... More
Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roof , landings, balconies, acessess platform
D.S.R. Item No. 5.9.3 ( Rate: 927.25x0.735x109/107)+1%=701.21)
5951.93
701
4173552.84
... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
dsr 5.9.2
1166.4
637
743136.77
... More
Brick work in foundation 1st class b/work in 1:4cement and couarse sand mortar in fdn and plinth incl. supply of all materials , labour and t& P required for proper completion of the work
D.S.R. Item No. 6.2.1 (Rate: 6504.90x0.735x109/107)+1%=4919.17)
56.62
4919
278523.41
... More
Brick work in SUPER STRUCTURE in 23 cm thk wall with 1:4 cement and coarse sand incl. all materials labour annd t&p etc. for proper completion of work.
D.S.R. Item No. 6.4.1 ( Rate: 9344.35x0.735x109/107)+1%=7066.44)
1184
7066
8366664.96
... More
Class 150 Brick work in 1:3 cement and Coarse Sand of 1.25 finentss modulusbut in Parapet including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12 cms.
D.S.R. Item No. 6.13.1 (Rate: 1150.50x0.735x109/107)+1%=870.04)
229.74
870
199882.99
... More
12 mm thk plaster (1:4) with cement & Coarse Sand (Fair Face)
D.S.R. Item No. 13.4.1 (Rate: 357.35x0.735x109/107)+1%=270.24)
4749.52
270
1283510.28
... More
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
D.S.R. 13.5.1 (Rate: 411.75x0.735x109/107)+1%=311.38)
1385.68
311
431473.04
... More
Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 ( Rate: 156.05x0.735x109/107)+1%=118.01)
6931.21
118
817952.09
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :-
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm.).
D.S.R. Item No. 13.46.1 (Rate: 160.60x0.735x109/107)+1%=121.45)
336.38
121
40853.35
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm.
D.S.R. Item No. 13.45.1
100
169
16909
... More
Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including
scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately).
D.S.R. Item No.13.72
3363.84
878
2956546.25
... More
Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :
15 mm wide and 15 mm deep groove
D.S.R. 13.73.1
1500
56
85245
... More
Extra for washed grit plaster on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
D.S.R. 13.74. x2
1177.34
250
295323.97
... More
Extra for washed stone grit plaster on circular work not exceeding
6 m in radius (in two coats).
D.S.R. 13.75
250
100
25247.5
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
D.S.R. Item No. 13.48.1
14628.78
146
2142823.69
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
D.S.R. Item No. 9.1.2
4.44
88116
391237.93
... More
Providing and fixing factory made PVC door shutter made of solid foam PVC profiles of thikness 5 mm and 15 mm at edges integrally extruded for vertical style and horizontal (top/ bottom/ lock) rails of minimum cross
section of 7Ommx 28mm, of shape and design as per manufacturer’s specifications having homogenous fine cellular structure and smooth integral outer skin, inserted with G.I. ‘C’ section/ rectangular tube profile
of minimum 0.30 mm thickness with 120 gsm coating as stiffeners as per manufacturer’s specifications Mitred cut joints for styles and rails provided with telescopic polymeric ‘L’ corners are jointed together using solvent
adhesive and strenghtened with fully threaded stainless steel screws (of required size) through reinforced stiffener with paneling of specified solid foam PVC board/ high pressure laminate of required thickness and of approved design and shade (matching the styles and rails), secured within styles and rails with specially designed solid foam PVC moulded beadings of required size using PVC solvent adhesive/ cement. The finished door shutter including SS hardware, 1 no. ss sliding bolt 200 x 10mm, 1 no. SS tower bolt 200 x 10 mm and 2 nos. SS handles 125mm, shall be fixed to frame with 3 nos. stainless steel hinges of minimum size 100x58x1.9 mm and stainless steel screws of required size complete as per direction of the Engineer-in-Charge. (Cost of above hardware is inclusive in rates)
PWD SOR Item No. 9.124
42.24
2480
104755.2
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
D.S.R. Item No. 9.21.1 ( Rate: 2392.65x0.735x109/107)+1%=1809.38)
74.8
1809
135341.62
... More
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
On one side only
D.S.R. Item No. 9.22.1 (Rate: 478.00x0.735x109/107)+1%=361.48)
74.8
361
27038.7
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
D.S.R. 13.62.1 (Rate: 226.25x0.735x109/107)+1%=171.10)
234.08
171
40051.09
... More
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 20 mm Dia D.S.R. 1.21.1 (Rate: 128.00x0.789x109/110)+1%=101.07)
280
101
28299.6
... More
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 25 mm Dia
D.S.R. 1.21.2 (Rate: 145.00x0.789x109/110)+1%=114.50)
980
114
112210
... More
Providing and fixing of junction box 200 x 250 mm
PWD SI No 154 elctrical SOR 2018
450
31
13950
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The
tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
Glazed vitrified floor tiles polished finish of size 600x1200mm
Make: Simpolo
D.S.R. Item No. 11.41A.2.2
4957.99
1360
6744353.8
... More
Antiskid tiles
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size
600 x 600 mm (Make : Simpolo)
DSR 11.41A.3.1 (Rate: 1464.85x0.735x109/107)+1%=1107.76)
231.08
1107
255981.18
... More
Extra for grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
Size of Tile 600x600 mm D.S.R. Item No. 11.48.2 (Rate: 309.05x0.735x109/107)+1%=233.71)
231.08
233
54005.71
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Make : Simpolo)
DSR 8.31 (Rate: 1267.95x0.735x109/107)+1%=958.86)
684.48
958
656320.49
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
D.S.R. 11.56.1
1263.15
3388
4280651.14
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels plain white marble/ udaipiur green marble / zebra balck marble area of slab over 0.50 sqm
D.S.R. Item No. 8.2.2.2 (Rate: 5136.30x0.735x109/107)+1%=3884.20)
205.51
3884
798241.94
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. D.S.R. Item No . 8.5 (Rate: 978.70x0.735x109/107)+1%=740.12)
36
740
26644.32
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
Granite work
D.S.R. Item No. 8.3.2 (Rate: 510.95x0.735x109/107)+1%=386.39)
350
386
135236.5
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
DSR 9.76 (Rate: 854.65x0.735x109/107)+1%=646.31)
28
646
18096.68
... More
Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.
DSR 9.77 (Rate: 726.60x0.735x109/107)+1%=549.70)
28
549
15385.16
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: DSR 22.7.1
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
D.S.R. 22.7.1 (Rate:1684.60x0.735x109/107)+1%=1273.94)
1392.24
1273
1773630.23
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase D.S.R 2021No 12.21.1 (Rate: 305.15x0.735x109/107)+1%=230.76)
320
230
73843.2
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. D.S.R. No.12.22 (Rate: 298.25x0.735x109/107)+1%=225.54)
12
225
2706.48
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both
side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange
of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges
of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm
interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing
compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,
diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
Fully Perforated Gypsum Plaster Board of size 1200 x
2400x12.5 mm having approx. 15 % perforated area with
perforation size and pattern as approved by the Engineerin- charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60
D.S.R. Item No. 12.45.4
5609.97
1318
7399382.13
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately) Make: Ozone/hettich
DSR No. 21.18
105.7
4027
425715.21
... More
Providing and fixing Stainless Steel H Shape Door Handle
Make: Ozone/hettich
MR
40
825
33000
... More
Providing & Fixing Floor Lock Make: Ozone/hettich
MR
20
2475
49500
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Make: Ozone/hettich
dsr 9.82
20
91
1839.8
... More
Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainlesssteel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (Make : Fenesta)
Two track four panels sliding door made of (big series) frame
67 x 50 mm & sash 46 x 82 mm both having wall thickness
of 2.3 ± 0.2 mm and single glazing bead / double glazing
bead of appropriate dimension. (Area of door above 8.00
sqm upto 10.00 sqm). sqm D.S.R. Item No. 9.147.A2.2
136.08
6488
882897.93
... More
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame,
sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM
gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2
mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm).
D.S.R. 9.147.E4.3
12.6
7723
97310.18
... More
6 mm thick clear heat strengthened glass
(Make : as provided by Fenesta)
DSR 2618
12.6
513
6469.85
... More
Float glass panes of nominal thickness 8 mm (weight not less than 20.00 kg/sqm)
(Make : as provided by Fenesta)
DSR 2408
136.08
484
65963.42
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate
52 mm thick cement concrete flooring with concrete hardener topping,
D.S.R. Item No. 11.3.1
203.15
464
94357.08
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
D.S.R. 2021 Item No. 10.28
250
584
146027.5
... More
Providing & Fixing Laminated Glass for the Purpose of Fin (8mm clear toughened glass+1.52mm EVA Film+8mm clear toughened glass) 17.52mm with frame structure and all complete fitting
Make: Ozone/hettich
Market Rate
534.38
8024
4288239.19
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately).
(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable
separately).
D.S.R. Item No. 16.75
366.85
7429
2725332.32
... More
Providing Standard quality hard board sheet 3 mm thick for Pavement Panel Joints
D.S.R. Item No. 0994
1080
109
118422
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
On concrete work
D.S.R. Item No. 13.52.2
3335
177
593063.05
... More
Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective
surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.
D.S.R. 16.50
250
156
39002.5
... More
Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S.
angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge.
D.S.R. Item No. 16.61
8
6166
49332.24
... More
Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per
direction of Engineer-in-charge and accordance with applicable specifications.
D.S.R. Item No. 16.62
180.6
565
102131.11
... More
Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge.
D.S.R. Item No. 16.65
50
683
34189
... More
Providing & Fixing Rubber Speed Breaker
As per MES
150
1960
294000
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating and chemical barrier under and around the columns pits, wall trenche basement excavation top surface if plinth filling junction of wall and floor along the external per meter of binding expension joints surrounding of pipes and conduit ete. Complete (Plinth area of the building at ground floor only shall be measured as per I.S.6313(part ii 1981). Aldrine emulsificable concentrate of any other approved material such as Hepthachlor or chlordance will be used. The rate of application of chemical emulsion shall be as follows.
I- Treatment for masonry and foundatrion 5 litres per sqm
II- Back fill in immediate contact with foundation 7.5 liters/sqm.
III- Treatment of top surface of plinth filling 5 liters per sqm
IV- Treatment junction of soil along extemal per meter building 7.50 litre/sqm.
V- Treatment of soil under apron along extemal perimeter 5 Iiter/ sqm.
DSR Item No. 2.35.3.1
3600
234
844092
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
D.S.R. 22.7.1
338.72
1273
431508.96
... More
Providing and fixing Godrej Vigiguard Automatic Boom Barrier with all complete fitting
Market Rate
2
129740
259480
... More
Providing and fixing Rectangle Car Park Display System, For Multi Purpose, Display Digit: 4
Market Rate
2
115000
230000
... More
Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3
kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.
18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc.
D.S.R. Item no. 8.11.1
200
7875
1575188
... More
Providing and laying machine cut, mirror polished Marble stone Flooring , in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the
marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
18 mm thick Italian Marble stone slab, Perlato, Rosso verona,
Fire Red or Dark Emperadore etc.
D.S.R. Item No. 11.52.1
180
5238
942955.2
... More
Providing and fixing 12mm Thick Toughened Glass Railing height of 3.5 ft with All Complete Fitting
Make: Ozone/Hettich
Market Rate
250
5497
1374250
... More
Providing & Spreading polythene sheet 125microne
1850
16
29600
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.
D.S.R. Item No. 5.35
1426.92
554
791498.25
... More
Pressure grouting with cement slurry, non shrink grout additive in RCC elements comprising of following: Providing and Fixing Nipple in RCC elements by drilling, fixing with quick setting materials at the location specified by engineer in charge.
Carry out cement slurry injection grouting through the nozzle with pressure pump. the grouting is to be continuid at each point until the nipple refuses the grout.
Cutting the nipple blocking of nozzle with supply and grouting with quick setting cement etc. Complete as directed by the EIC. for work at all levels, with required sacffolding.
Unit of measurement : no. of injection point
120
180
21616.8
... More
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4
coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.
Make: Simpolo
D.S.R. Item No. 12.55
1740.15
1288
2242305.09
... More
Providing, fabricating and installation of structural glazing in aluminium section of 100 x 50 hollow section with 5mm one way reflective glass fixed over aluminium section with help of approved silicon sealent as per architect instruction & design etc. complete as per the specifications
Market Rate
350
7850
2747500
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working
platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the
workmen etc. complete as per directions and approval of Engineerin-
charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
D.S.R. Item No. 14.72
3000
255
767370
... More
Parking & Pathway Area
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
D.S.R. Item No. 2.8.1 ( Rate: 260.30x0.735x109/107)+1%=196.85)
109.44
196
21543.26
... More
Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.8 ( Rate: 6812.00x0.735x109/107)+1%=5151.41)
31.27
5151
161084.59
... More
Brick work in foundation 1st class b/work in 1:4cement and couarse sand mortar in fdn and plinth incl. supply of all materials , labour and t& P required for proper completion of the work
D.S.R. Item No. 6.2.1 (Rate: 6504.90x0.735x109/107)+1%=4919.17)
71.91
4919
353737.51
... More
Construction of granular sub base (G.S.B.) by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, compete at per clause 401. (Analysis Rate)
417.32
3780
1577469.6
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal
size in appropriate proportions as per approved & specified designcriteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using
needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm
deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).
Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
Cement concrete manufactured in automatic batching
plant (RMC plant) i/c transportation to site in transit
mixerD.S.R. Item No. 16.43.2
389.13
8392
3265940.85
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage and over lapping and hooks and authorised overlapping shall be measured . D.S.R. Item No. 5.22.1
15273.35
80
1236988.62
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved
by Engineer-in-charge).
D.S.R. Item No. 16.69 ( Rate:10117.60x0.735x109/107)+1%=7651.19)
49.87
7651
381564.85
... More
Providing and laying Rubber Moulded InterlockingTiles chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
80 mm thick Rubber Moulded Interlocking Tiles of MPa-30 strength with approved color design and pattern. Make : ACC, Ultratech
PWD SOR 2023 Item No. Road Work New Item No. 1 Page No. 41
417.32
875
365155
... More
Earth Filling including cartage
Earth work cutting on in embankment in ordinary soil earth work in embankment to be in 20cm layers including watering dressing and compacting the soil to achieve 95% proctor density and also including the surface required level and slops and also including lift 1.50m and lead 8km.
Analysis Rate
7004.25
396
2773683
... More
Drain Work 300x450mm Analysis
90
9260
833485.5
... More
Boundary Wall
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
D.S.R. Item No. 2.8.1 ( Rate: 260.30x0.735x109/107)+1%=196.85)
435.38
196
85704.55
... More
Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.8 ( Rate: 6812.00x0.735x109/107)+1%=5151.41)
35.27
5151
181690.23
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriagefor all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
Concrete of M25 grade with minimum cement content of 350 kg /cum All works upto plinth level RCC as in fdns and footings of colums and plinth beam and bases of column. D.S.R. Item No. 5.33.1.1 ( Rate: 9504.75x0.735x109/107)+1%=7187.74)
161.97
7187
1164198.25
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum (level 1 to lvl-5) D.S.R. Item No. 5.33.2.1 ( Rate: 9860.40x0.735x109/107)+1%=7456.69)
40.55
7456
302368.78
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage and over lapping and hooks and authorised overlapping shall be measured . D.S.R. Item No. 5.22.1 ( Rate: 107.10x0.735x109/107)+1%=80.99)
21473.28
80
1739120.95
... More
Centering and shuttering including strutting, propping etc. and removal of form for footings/PB, rough finished surface of conc. D.S.R. Item No. 5.9.1 ( Rate: 392.15x0.735x109/107)+1%=296.55)
193.5
296
57382.43
... More
Centering and shuttering including strutting, propping etc. and removal of form for columns, pillers, piesr, abutment , post and struts
dsr 5.9.6
365.33
726
265580.3
... More
Centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers
dsr 5.9.5
456
556
253937.28
... More
Brick work in foundation 1st class b/work in 1:4cement and couarse sand mortar in fdn and plinth incl. supply of all materials , labour and t& P required for proper completion of the work
D.S.R. Item No. 6.2.1 ( Rate: 6504.90x0.735x109/107)+1%=4919.17)
119.39
4919
587299.71
... More
Brick work in SUPER STRUCTURE in 23 cm thk wall with 1:4 cement and coarse sand incl. all materials labour annd t&p etc. for proper completion of work.
D.S.R. Item No. 6.4.1 ( Rate: 9344.35x0.735x109/107)+1%=7066.44)
105.79
7066
747558.69
... More
12 mm thk plaster (1:4) with cement & Coarse Sand (Fair Face)
D.S.R. Item No. 13.4.1 ( Rate: 357.35x0.735x109/107)+1%=270.24)
1195
270
322936.8
... More
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
D.S.R. 13.5.1
684
311
212983.92
... More
Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 ( Rate: 156.05x0.735x109/107)+1%=118.01)
1195
118
141021.95
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :-
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm.).
D.S.R. Item No. 13.46.1 (Rate: 160.60x0.735x109/107)+1%=121.45)
1195
121
145132.75
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. D.S.R. Item No. 10.16.1 ( Rate: 194.40x0.735x109/107)+1%=147.01)
1800
147
264618
... More
Providng & Fixing of cast iron ornamental grill with all complete fitting.
Market Rate
4266
90
383940
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
13.61.1 Two or more coats on new work
D.S.R. 13.52.1
341.28
182
62392.81
... More
Rain Water Harvesting
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed with in a lead of 50 cm.
a) Pipes 80mm to 300mm diameter.
D.S.R. Item No. 2.10.1.2
183.1
266
48759.53
... More
Providing & Fixing P.V.C.150 mm dia 6kg/sq.cm
PWD SOR Item No. 730A
183.1
725
132747.5
... More
Providing & laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40mm nominal size) alround PVC pipes including bed concrete as per standard design.
b)150mm diameter PVC Pipe.
D.S.R. Item No. 19.2.2
183.1
892
163367.31
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
16
8214
131430.88
... More
Extra for depth for manholes: 900x800mm
2
6673
13347.98
... More
Recharge Pit
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. Up to 1.50 mt depth
D.S.R. Item No. 2.8.1
16.3
196
3207.99
... More
above 1.50 mt Up to 3.00 mt depth
D.S.R. Item No. 2.8.1+2.11
16.3
292
4773.11
... More
above 3.00 mt Up to 4.50 mt depth
2.8.1+2.11x2
16.3
388
6338.24
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth
1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
D.S.R. Item No. 4.1.8
10.03
5151
51689.25
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) :
D.S.R. Item NO. 6.1.2
23.24
5393
125332.79
... More
Reinforced cement concrete work in beams;suspended floors;roofs having slope upto15 landing s;balconies;shelves;chajjas;lintel s;bands;plain window sills staircases and spiral staircases up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)In Lintel & Projection D.S.R. Item No. 5.3
3.24
8700
28171.9
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
Mild Steel
D.S.R. Item No. 5.22.1
381.26
80
30878.18
... More
Centring and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access
platform
D.S.R. Item No. 5.9.3
21.59
701
15136.18
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting
samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools,
plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
300 mm dia D.S.R. Item No. 23.1.1
60
535
32113.2
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs,
conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
100 mm nominal size dia D.S.R. Item No. 23.4.1
20
519
10383.8
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. D.S.R. Item No. 23.7
6.45
1163
7504.89
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. D.S.R. Item No. 23.6
6.45
1163
7504.89
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
D.S.R. Item NO. 23.5
6.45
1141
7366.11
... More
Sunmersible Pump with Boring
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
D.S.R. Item NO. 23.1.1.3 400 mm dia
90
749
67434.3
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.
D.S.R. Item No. 23.2.1.3, 400mm dia
15
936
14048.85
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia
D.S.R. Item No. 23.3.3
60
841
50516.4
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia
D.S.R. Item No. 23.4.3
30
949
28487.7
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
D.S.R. Item No. 23.8
8.48
1530
12979.65
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
D.S.R. Item No. 23.12
24
820
19692.96
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of : 200 mm dia
D.S.R. Item No. 23.13.3
1
242
242.86
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp.
D.S.R. Item No. 23.14.3
1
1734
1734.52
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia.
D.S.R. Item No.23.15.3
1
270
270.43
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal bore
D.S.R. Item No. 18.12.6
50
576
28818
... More
Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) D.S.R. Item No.18.17.4
1
776
776.38
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick workin cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameterand 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mmnominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cementcomplete as per standard design :
D.S.R. Item No.18.33.1
1
8214
8214.43
... More
Supply of 100mm dia Johnson screen.
N.S.
4
250
1000
... More
Supply of submersible pump of make KSB 3.00 HP with control panel, support wire etc. complete.
N.S.
1
45000
45000
... More
Supply and fixing of finolex of copper cable ISI marked submersible cable of size 6 sq mm
N.S.
90
175
15750
... More
Plumbing & Sanitary Works
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge
Make : Jaquar/Kohler
D.S.R. 17.81
24
13773
330553.44
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
Make : Jaquar/Kohler
D.S.R. 17.80
8
6034
48272.64
... More
Providing and fixing Oval type wash basin, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require, White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
Make : Jaquar/Kohler
Market Rate
32
4500
144000
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
Make : Jaquar/Kohler
D.S.R. 17.16A
24
264
6336.96
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Semi rigid pipe 40 mm dia Make : Jaquar/Kohler
D.S.R. 17.28.1.2
32
88
2824
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
Make : Jaquar/Kohler
D.S.R. 17.29
32
40
1288.64
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Make : Jaquar/Kohler
D.S.R. 17.31
32
1215
38911.04
... More
Providing and fixing toilet paper holder :
C.P. brass
Make : Jaquar/Kohler
D.S.R. 17.34.1
24
607
14586.72
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
100 mm inlet and 100 mm outlet
Sand cast iron S&S as per IS - 3989
Make : PRINCE/ASTRAL
D.S.R. 17.60.1.1
24
1509
36235.2
... More
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :
50 mm dia
D.S.R. 17.61.3
24
254
6098.16
... More
C.P.V.C. PIPES
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge
Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes D.S.R. Item no. 18.9.2
150
207
31114.5
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge
25 mm nominal outer dia Pipes, Make: Astral/Finolex
D.S.R. Item no. 18.9.3
75
268
20157
... More
32 mm nominal outer dia Pipes, Make: Astral/Finolex
D.S.R. Item no. 18.9.4
60
331
19900.8
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
45 cm length 15 mm nominal bore, Make Astral/Finolex
D.S.R. 18.21.2.1
64
73
4730.88
... More
C.P. BRASS FITTINGS
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15 mm nominal bore, Make : Jaquar/Kohler
D.S.R. 18.49.1
64
383
24528.64
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
15 mm nominal bore, Make : Jaquar/Kohler
D.S.R. 18.50.1
32
620
19860.16
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
15 mm nominal bore, Make : Jaquar/Kohler
D.S.R. 18.52.1
32
507
16224.32
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15 mm nominal bore, Make : Jaquar/Kohler
D.S.R. 18.53.1
64
434
27795.2
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
15 mm nominal bore, Make : Jaquar/Kohler
D.S.R. 18.53A
32
56
1810.24
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms Make: Jaquar
D.S.R 2021 Item No. 17.71
32
127
4073.92
... More
Providing and fixing toilet paper holder. Make: Jaquar
C.P. brass
D.S.R 2021 Item No. 17.34.1
24
607
14586.72
... More
Providing and fixing stainless steel kitchen sink as per I.S.13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required complete in all respect Kitchen sink with drain board 510 x 1040 bowl depth 200 mm. Make : Jaquar/Kohler/Kohler
D.S.R 2021 Item No. 17.10.1.3
4
5413
21655.28
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Make : Prince/Astral
32 mm dia
DSR Item No. 17.28.1.1
4
78
314.28
... More
Cutting holes up to 30x30 cm in walls including making good the same:
With common burnt clay F.P.S. (non modular) bricks
D.S.R. 18.76.1
16
315
5043.04
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
D.S.R. 18.77
20
341
6836.2
... More
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
D.S.R. 18.78
15
153
2301.6
... More
DRAINAGE (For External Drainage Works)
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
D.S.R. 18.33.1
8
8214
65715.44
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
D.S.R. 19.4.3.1
8
2119
16952.48
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) finished with a floating
coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
D.S.R. 19.7.1.1
8
9657
77259.36
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 D.S.R. 19.7.3.1
4
24847
99391.8
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
For pipes 100 to 250 mm diameter
D.S.R. Item No. 19.21.1
8
612
4903.04
... More
Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology.
15 mm nominal bore
D.S.R. Item No. 18.84.1
32
6657
213042.56
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Make : Finolex/Astral
D.S.R. 18.48
8000
8
66560
... More
Providing water cooler 40ltr cooling capecity 20L/Hrs
Make: Blue Star Including all Complete Fitting
4
30500
122000
... More
Providing & Fixing Industrial RO Plant with all complete fitting Market Rate
1
650000
650000
... More
Supplying, installation, testing and commissioning of grid interactive roof top solar photo voltaic power generation system including space frame
30
30281
908430
... More
Sewerage System
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
D.S.R. Item No. 2.8.1
199.13
196
39197.76
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :mm Internal Diameter R.C.C. pipe
(a) 250 mm dia. DSR 2023 Item No. 19.6.3
160
680
108872
... More
Providing and fixing in position the precast cement concrete in 1:2:4, 250mm saddle piller with 20mm guage stone grit coarse sand and cement as per drawing for different dia of pipe including rendring the surface smooth and cost of frame work including all labour T&P etc. required for proper completion of the work as directed by the E/I (Approved rate)
250MM dia Saddle piller P.S.
60
346
20760
... More
Construction of RCC rectaongular man hole/chamber of size 900x600x1500mm internal size with M25 grade ready mix cement concrete, foundation concrete of 1:4:8 (1 cement : 4 coarse sand: 8 stone aggregate of 40mm size) and making necessary channel with cement concrete 1:2:4(1 cement : 2 coarse sand: 4 stone aggregate of 20mm size) finished with floating coat of neat cement, HD 20 circular man hole cover of size 600mm dia, foot rest of 20x20mm size rectangular cast iron and orange colour PVC coated. including cost of all material, labour, T&P, centering and shurttering etc. required for proper completion of the work as per design.
Analysis Rate
12
14629
175548
... More
Construction of brick masonery chamber rectaongular type of size 60x60x75cm internal size with M150 grade brick masonery in cement mortar 1:4 (1 cement : 4 coarse sand) and 12mm thick cement plaster in 1:4 (1 cement : 4 Coarse sand) with a floating coat of neat cement, 8 cm thick cement concrete of 1:4:8 (1cement:4 Coarse sand : 8 brick ballast) making necessary channel with cement concrete 1:2:4(1 cement : 2 coarse sand: 4 stone aggregate of 20mm size) finished with floating coat of neat cement, HD 10 rectangular cover of size 45x45cm with frame, including cost of all material, labour, T&P, centering and shurttering etc. required for proper completion of the work as per design.
Analysis Rate
8
5580
44640
... More
Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.8
14.4
5151
74180.3
... More
C.C. 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.3
32
5957
190653.44
... More
Internal & External Electricals Works
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
Group C
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.10.3 (Electrical 2022)
960
1157
1111161.6
... More
Wiring for circuit/sub-main wiring along with earth wire with the following size of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
make:Schneider/RR Kabel/Northwest 2X1.5 sqmm + 1x1.5 sqmm earth wire
D.S.R. Item No. 1.14.1 (Electrical 2022)
2850
183
523944
... More
2X2.5 sqmm + 1x 2.5 sqmm earth wire
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.14.2 (Electrical 2022)
1850
216
401413
... More
2X4.0 sqmm + 1x 4.0 sqmm earth wire
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.14.3 (Electrical 2022)
1465
263
386071.45
... More
2X6.0 sqmm + 1x 6.0 sqmm earth wire
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.14.4 (Electrical 2022)
950
346
329051.5
... More
Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.19 (Electrical 2022)
650
37
24102
... More
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 20mm
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.21.1 (Electrical 2022)
1050
100
106039.5
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
TV antenna socket outlet
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.24.7 (Electrical 2022)
960
116
112099.2
... More
Supply and fixing of stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.25 (Electrical 2022)
180
291
52405.2
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.26 (Electrical 2022)
180
31
5680.8
... More
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 module(75mm X 75 mm )
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.27 (Electrical 2022)
180
235
42321.6
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,connection etc. as required.
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.31 (Electrical 2022)
180
376
67743
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,connection etc. as required.
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.32 (Electrical 2022)
180
462
83223
... More
Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/woodedn block including connectionetc. as required. make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.33 (Electrical 2022)
180
68
12355.2
... More
Supplying and fixing brass batten/angle holder including connectionetc. as required.
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.34 (Electrical 2022)
180
103
18604.8
... More
Instalation,testing & commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLSCFL/LED lamps per fitting, complete with all accessories including connection etc. as required.
make:Schneider/RR Kabel/Northwest/Bajaj D.S.R. Item No. 1.35 (Electrical 2022)
220
93
20655.8
... More
Installation, testing and commissioning of prewired, flourescent fitting / compact fluorescent fitting of all types, complete with all accessories and tubes etc. directly on ceiling / wall, including connection with 1.5 sq. mm. PVC insulated, copper conductor, single core cable etc. as required. make:Schneider/RR Kabel/Northwest/Bajaj D.S.R. Item No. 1.41 (Electrical 2022)
365
162
59323.45
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. Including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
make:Schneider/RR Kabel/Northwest/Bajaj D.S.R. Item No. 1.45 (Electrical 2022)
180
267
48144.6
... More
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
D.S.R. Item No. 1.49 (Electrical 2022)
16
44
719.52
... More
Installation of exhaust fan in the existing opening, including making good the damage, connections, testing, commissioning etc. as required. upto 450 mm sweep.
D.S.R. Item No. 1.50 (Electrical 2022)
16
355
5680.8
... More
Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes. D.S.R. Item No. 1.51 (Electrical 2022)
16
163
2613.12
... More
Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, `C` curve including connections, painting etc. as required.
D.S.R. Item No. 1.57 (Electrical 2022)
80
573
45888
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Disect Current(BLDC) motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value(CM/M/W) minimum 6, Air delivery minimum 210 Cum/Min, 350 RPM(tolerance as per IS: 374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise= 75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
make: Bajaj/Havells/Crompton
D.S.R. Item No. 19.1 (Electrical 2022)
180
2153
387714.6
... More
Supplying and fixing following way, single pole and neutral sheet steel, MCB distribution board, 240 V on surface /recess complete with , tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators). make:Schneider/RR Kabel/Northwest
12 way, Double door
D.S.R. Item No. 2.3.3 (Electrical 2022)
60
1826
109592.4
... More
Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series, miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Make:Schneider/RR Kabel/Northwest
Single Pole
D.S.R. Item No. 2.10.1 (Electrical 2022)
12
201
2423.76
... More
Double Pole
D.S.R. Item No. 2.10.3 (Electrical 2022)
12
517
6210.96
... More
12 Way SPN. Make: Schneider/MDS UPPWD-2018 1025 (A)
12
2250
27000
... More
6 Way TPN Make: Schneider/MDS UPPWD-2018 1027 (A)
12
4370
52440
... More
Supplying and fixing single pole, blanking plate in the existing MCB DB complete etc. as required.
Make:Schneider/RR Kabel/Northwest
D.S.R. Item No. 2.11 (Electrical 2022)
48
10
492.48
... More
Earthing with GI earth pipe, 600 mm X 600 mm X 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/cock and salt as required. Make: As approved in U.P.P.W.D & C.P.R.I.
D.S.R. Item No. 5.4 (Electrical 2022)
4
5895
23581.64
... More
Supplying and Laying of 25 mm X 3 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with nut, bolt, spring, washer etc. as required.( jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
Make: As approved in U.P.P.W.D & C.P.R.I.
D.S.R. Item No. 5.9 (Electrical 2022)
60
113
6817.2
... More
Supplying and Laying of 6 SWG G.I wire at 0.50 metre below ground level for conductor earth electrode, including connection / terminating with G.I. thimble etc. as required.
Make: As approved in U.P.P.W.D & C.P.R.I.
D.S.R. Item No. 5.7 (Electrical 2022)
60
40
2414.4
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq. mm
Make: Finolex/R.R. Kabel
D.S.R. Item No. 7.1 (Electrical 2022)
16
305
4885.44
... More
Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
Make: Finolex/RR Kabel 2 X 10 sqmm. (19mm)
D.S.R. Item No. 9.2 (Electrical 2022)
4
190
760.6
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required.
Make Finolex 50 mm Dia
D.S.R. Item No. 14.13.1 (Electrical 2022)
25
516
12904
... More
Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554.
16 sq. mm 4 core PWD SOR 501(i)
Make - Finolex/RR Kabel
365
343
125195
... More
Supply & fixing of Supplying Installation, testing and commissioning of GLINT RD Edge lit sleek round recessed mounted LED downlight with white powder coated die cast housing and di user for low glare illumination.
BGSLO Sleek Recess RD 9W WH LED
Make : Philips/Bajaj
Market Rate
360
788
283968
... More
Supply and fixing of LED Tube Light with batten suitable for up to 1X20 watt LED tube light complete including tube etc. on surface complete in all respect.
BCLAB 20W LED PS
Market Rate
220
1479
325380
... More
S/f of 340 mm wide x 101.6 mm deep(3.0") Concealed Box PWD SOR Item No. 1151c
350
110
38500
... More
Supply and fixing of LED Hanging light 24Watt.
Make : Philips/Bajaj
250
1560
390000
... More
Supply and fixing of LED Sqaure Ceiling light 24Watt.
BPSLR Surface 24W LED WH SQ SD
Make : Philips/Bajaj
280
1676
469336
... More
Supply of 300mm dia sweep PVC body, 900±10% RPM Exhaust fan with guard and mounting arrangement. (As per MR-G11) (Rate=979/1.18
300mm sweep. Make : Philips/Bajaj
16
829
13274.56
... More
SUBHEAD V-MAIN L. T. PANELS
PANEL
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section. make:Schneider/RR Kabel/Northwest The minimum clearances between bus bars shall be as follows :
Phase to phase - minimum 20mm Phase to neutral-minimum 15mm mtr PANEL Incoming : One (1) No 100 Amp. 4P MCCB of 25KA Breaking capacity mtring : One (1) No. Sets Multifunction mtr nos incoming One (1) No. of Phase Indication Lamp nos incoming Bus Bar :
One (1) No. 150 Amp.TPN aluminimum bus bar of suitable length. Outgoing : Phase indication lamps on nos outgoing to be provided.
01 No.63 Amp 4P MCB. (10 KA) 19 No.63 Amp DP MCB. (10 KA) 02 No.40 Amp DP MCB. (10 KA) Panel described as above. N.S
1
151250
151250
... More
P/F 30W AIO LED Solar street light(Hybrid) with 5M octagonal pole Model No. 30W-SOLAR BSZSL 30W LED HYB-STANDARD HYBRID
Make Bajaj
10
75922
759220
... More
Providing & Fixing LED post top Light made in die-cast aluminium housing with decorative clear and opal acrylic di user with IP65 protection.
Model No. BCF FLO 60W LED WH OP PT
Make Bajaj
15
34510
517650
... More
Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-38 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect.
Make : Bajaj
PWD Electrical SOR 2018
10
15676
156760
... More
Supply & Fixing of Decorative pole 4.0M. Height, 275mm Base Dia & 76.1mm Pipe Dia made of Galvanized steel pipes fitted with cast iron embellishment polyurethane paint coated. (Prices are without Brackets)
Model No. MFHD - 228A
Make : Bajaj
Market Rate
15
11995
179925
... More
Providing & Fixing Spike Light with all complete Fitting.
(SPYKZ BGSBL 9W LED WW)
LED Spike/ Bush light with die-cast aluminium housing designed for rugged outdoor usage & IP65 protection.
Make Bajaj
Market Rate
60
5916
354960
... More
Providing & Fixing Wall Focus Light
AMAZE (BJFL 50W LED I) A resilient floodlight with toughened glass, aluminum housing, IP66 protection. Experience superior lighting for industrial and commercial settings.
Make Bajaj/Philips
Market Rate
60
5916
354960
... More
P/F 1.20 M. Height 30 watt Bollard Light with all complete fitting
BAJAJ KOLUX 30W 30K 1.2M 165 BN Make Bajaj
20
30000
600000
... More
Providing & Installation of 8 Passenger Lift including all complete fitting.
Make: Otis/Schindler
4
1600000
6400000
... More
FIRE HYDRANT SYSTEM
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)
(a)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.
900 lpm at 35 m Head (DSR/AOR 2019 4.1)
4
90130
360521.44
... More
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required DSR(E&M)DSR 16.8)
4
944
3777.68
... More
Air Release Valve, Gunmetal, having rubber ball with 1” (25mm) BSP Male threaded inlet (Market Rate) P.S.
4
1518
6072.04
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. (DSR/AOR No. 20)
4
16079
64317.84
... More
Providing, laying, of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (25 mm dia) (DSR/AOR 7.1)
1050
420
441567
... More
32 mm dia (DSR/AOR 7.2)
120
470
56464.8
... More
40 mm dia (DSR/AOR 7.3)
75
581
43593.75
... More
50 mm dia (DSR/AOR 7.4)
90
702
63241.2
... More
65 mm dia (DSR/AOR 7.5)
150
896
134464.5
... More
80 mm dia (DSR/AOR 7.6)
180
1001
180322.2
... More
100 mm dia (DSR/AOR 7.7)
60
1338
80303.4
... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : (Pendent Sprinkler) (DSR/AOR 21.1)
850
432
367319
... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :
Horizontal side wall sprinkler
D.S.R. Item No. 21.3
90
516
46526.4
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150 mm dia (DSR/AOR 11.6)
8
7766
62135.68
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : (150mm dia) (DSR /AOR 14.7)
8
15693
125550
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. (DSR/AOR 13)
8
1152
9221.44
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal (DSR/ AOR 9.1)
8
6691
53528.56
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal (DSR/AOR 16.1)
8
4632
37057.12
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket 30 m (DSR/AOR 17.1)
8
7511
60092.88
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal (DSR/AOR 18.1)
8
2144
17157.12
... More
Fireman Axe-made of carbon steel with rubber insulated handle tested to 20,000 Volts as per IS:926 Make: NEWAGE (Market Rate)
P.S.
8
1206
9651.44
... More
Fire shaft door fabricated out of M.S. sheet and frame, door size of 1200 (W) x 2100 (h) with 4 mm thick glass, suitable Rubber beading and Locking arrangement and complete door shall be powder coated with red color powder coating P.S.
(Market Rate)
8
14926
119414.72
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : (2 way-100 mm dia M.S. Pipe) (DSR/AOR 19.1)
8
5883
47071.44
... More
Co2 type Fire Extinguisher 4.5 Kgs. Capacity, made from brand new seamless cylinder, as per IS: 7285 and CCE approval, fitted with Discharge hose and horn and wheel type valve with initial Charge as per IS: 15683:2018 specification, bearing ISI Mark & EIL approved. Make: SAFEX PWD SOR Electrical 2018 Item No. 1132
20
11980
239600
... More
Co2 type Fire Extinguisher 6.5Kgs. Capacity, made from brand new seamless steel cylinder, as per IS: 7285 and CCE approval fitted with discharge, hose and horn with wheel type valve mounted on trolley wheels with initial charge as per IS: 16018 : 2012 specification, bearing ISI Mark & EIL approved. Make: PWD SOR Electrical 2018 Item No. 1132(A)
20
19900
398000
... More
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge. (Market Rate) P.S.
20
680
13609.8
... More
SUB-HEAD-IV FIRE ALARM SYSTEM Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all DELHI SCHEDULE OF RATES (E&M) 2018 65 accessories as required- 2 Nos.(one to act as standby) Item No. Description Unit Rate Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set. Amplifier change over switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt,30 AH each sealed maintenance free batteries -1 set.
6 Loop Panel.
D.S.R. Electrical 2022 Item No. 17.1.11
4
38469
153879.8
... More
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
DSR E&M 2022_17.1.3
4
374
1497.16
... More
Supplying, installation, testing & commissioning fire alarm ounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
DSR E&M 2022_17.1.7
4
387
1550.88
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of cross linkable Ethylene Propylene Runner (EPR) inshulation and LSZH inner bedding, steel wire armouring & FRLS outer sheath complete as required.
DSR E&M 2022_17.5.1
850
283
240958
... More
FIRE PUMPS
Supplying, Fixing, testing & commissioning Diesel engine driven horizontal multistage single outlet centrifugal pump set capable of delivering 2850 LPM at 100 M head, having cast iron casing, bronze impellers, EN-8 shaft with bronze shaft sleeves directly coupled to Engine, 1500 RPM, complete on MS channel base plate with coupling guard, Day tank, Battery starting kit, etc. complete (Diesel driven Pump) 100mm gi pipe upto terrace with aluminium cladding
DSR/AOR 2019 2.3
1
536275
536275.32
... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following,
complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered
and with anti vibration pads. 180 lpm at 88 m Head DSR/AOR 2019 Item No. 3.1
2
110683
221367.82
... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m Head DSR/AOR 2019 Item No. 4.1
2
88510
177020.6
... More
CCTV CAMERA SYSTEM
Supply, , Installation Testing and Commissioning of 4 MP IP, 5 inch PTZ camera with 32*Zoom & 150 Meter IR with SD card supported. IP 67, Focal length 4.5 to 153mm, Frame rate max. 25/30fps, max. resolution 2560*1440 & Image Sensor 1/2.5'' progressive scan CMOS. Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit
50
77357
3867850
... More
Supply, , Installation Testing and Commissioning of IP Bullet
Camera IR type with the following specification
Minimum 2.0 MP resolution, IP 67, 0.2 lux at F 1.2, 1/3" DIS, 3.6mm fixed iris lens.
Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit
45
3669
165105
... More
PVC junctin IP rating 65 suitable for CCTV camera work.
Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit
45
90
4050
... More
Supply, laying and testing of unshielded twisted pair CAT 6 network cable (Violet Color) confirming to TIA/EIA standards, in heavy class FRLS PVC pipes / conduits, rate shall include necessary accessories all complete as required. Cost to include dressing the cable with proper accessories, proper addressing of cables using ferrules. labelling and end to end signal continuity testing for all ports. The wires shall be of different colours as required.
Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit
2800
72
201600
... More
Supply, laying and testing of unshielded twisted pair armoured CAT 6 network cable (Black Color) confirming to TIA/EIA standards. Rate shall include necessary accessories all complete as required. Cost to include dressing the cable with proper accessories, proper addressing of cables using ferrules. labelling and end to end signal continuity testing for all ports. The wires shall be of different colours as required.
Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit
850
55
46750
... More
Supply, fixing, tesing & commissioning of CAT - 6, 8 position, 8 wire, network RJ 45 Connectors including crimping, testing end to end connectivity and necessary acessories all complete as required.
Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit
550
35
19250
... More
Supply, fixing, tesing & commissioning of RJ 45 In line Coupler Ethernet Network Cable Extender Connector including testing end to end connectivity and necessary acessories all complete
Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit as required.
100
216
21600
... More
Patch Panel
Supply, installation, tesing & commissioning of 24 Port loaded
patch panel CAT6 (1U with rear wire manager) silver-plated
IDCs (insulation displacement connection) for secure, reliable
gas-tight connections
Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit
40
2950
118000
... More
Switch Panel
Supply, installation, tesing & commissioning of 24 Port PoE Network switch 10/100/1000 GBps, managed type (1U with rear wire manager) with silver-plated IDCs (insulation displacement connection) for secure, reliable gas-tight connections.
Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit
40
23578
943120
... More
Network Rack
Supply, installation, tesing & commissioning of 6U rack with glass fronted door, lockable arrangement along with power bus, ventilation fans including necessary fixing accessories all complete as required
Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit
10
3889
38890
... More
Supply, fixing and checking connectivity of Patch cords (1m)
CAT6 (RJ45 with moulded boots) at switch end
Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit
100
350
35000
... More
Supply , fixing and checking connectivity of Patch cords (1m)
CAT6 (RJ 45 with moulded boots) at user end
Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit
100
350
35000
... More
Supply, Installation Testing and Commissioning of 32 channel Network Video Recorder (NVR) with TCP IP, RS 232, RS 485 Connectivity capable of handling Up to 5 MP cameras, 4k HD, 30 FPS and shall be ONVIF compatible. The NVR shall be suitable for
connecting multiple HDD (SATA / eSATA) of 8 TB capacity. The NVR shall have provision for multiple HDMI / VGA simultaneous output and also audio output. The cost to include setting up, commissioning of system all complete as required
Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit
15
43349
650235
... More
GIGA byte switch 8 port.
Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit
15
3000
45000
... More
Supply, and Installation of following capacity Hard disk drives
for storing the recorded data - 8TB
Approved Makes: Seagate, WD ,
15
32390
485850
... More
Supply, Installation, Testing and Commissioning of LCD / LED
monitor capable of displaying the output of the CCTV system
in the location specified at site- 31.5 inches TV with KVM
splitter & HDMI cable.
Make: Samsumg, Sony
5
32199
160995
... More
HVAC SYSTEM
Variable refrigerant Volume/Flow System Outdoor Unit
Supply, Installation, testing and commisioning of modular type variable refrigerant flow air conditioning system suitable for both heating and cooling with Inverter Scroll Compressor suitable for 415 ±10% V for outdoor unit including fully charged with refrigerant R410A to outdoor unit and all running refrigerant pipe as per detail given in specifications & drawings for the following configurations. It shall include anti vibration isolator pad for outdoors unit. The unit shall be complete in all respect and should match the specification , Drawings and Schedule. The Outdoor should be able to operate between -5 deg C to 52 deg C. The compressor should be of same manufacturer as of outdoor units.The unit shall have auto phase corrector so that unit can work in case of phase reversal and accumulator should be present in outdoor units to prevent liquid backflow in compressor..For better energy efficeincy and power saving the COP of ODU should be minimum 4.1 at AHRI conditions. Make: Mitsubishi Electric/Panasonic/Daikin
8HP (As per DSR_VRF/VRV _2019_1.1) (Rate=20618.15X8)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 16415x363/289)=20618.15
2
164945
329890.4
... More
12 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=20618.15X12) Make: Mitsubishi Electric/Panasonic/Daikin
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 16415x363/289)=20618.15
2
247417
494835.58
... More
14 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=20618.15X14) Make: Mitsubishi Electric/Panasonic/Daikin
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 16415x363/289)=20618.15
4
288654
1154616.32
... More
Indoor Unit Cassette Type
Supply, Installation, Testing & Commissioning of following minimum capacity 4-way flow VRF/VRF Cassette type indoor ceiling mounted unit equipped with synthetic washable media pre filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolator, cordess remote control etc., suitable for operation on single phase 230V + 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS system or fire panel of the building. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. Make: Mitsubishi Electric/Panasonic/Daikin
3.2 TR 4 Way VRV/VRF Cassette Unit(As per DSR_VRF/VRV _2019_2.8)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 32787x363/289)=41182.29
4
41182
164729.16
... More
2.8 TR 4 Way VRV/VRF Cassette Unit(As per DSR_VRF/VRV _2019_2.5) Make: Mitsubishi Electric/Panasonic/Daikin
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 32015 x 363/289)=40212.61
10
40212
402126.1
... More
Indoor Unit High Wall Type
Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multi speed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, drain pump, cordless remote control, drain pan, necessary accessories etc., suitable for operation on 230V±10%, 50Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
1.65TR(As per DSR_VRF/VRV _2019_3.6) Make: Mitsubishi Electric/Panasonic/Daikin
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 21746.00 x 363/289)=27314.18
10
27314
273141.8
... More
Indoor Unit Ductable Type
Supply, Installation, Testing & Commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V + 10%, 50Hz, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS system or fire panel of the building. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
Mid Static Ductable Units (Minimum 45 Pascal External Static Pressure)
3.40TR(As per DSR_VRF/VRV _2019_4.15) Make: Mitsubishi Electric/Panasonic/Daikin
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 47651 x 363/289)=59825.29
1
59852
59852.29
... More
Supply Installation, testing & commissioning of Y-joints for various size of Refrigerant pipe including insulation. (As per MR-1) (Rate=4123/1.18)
45
3494
157233.15
... More
Centralized controller
Supply Installation, testing & commissioning of Main Intelligent touch screen central controller system including all the accessories suitable to operate, monitor, on/off, temperature setting of all the indoor units individually complete as required and as specified. Make: Mitsubishi Electric/Panasonic/Daikin (As per MR-2) (Rate=80703/1.18)
2
68392
136784.74
... More
Copper Refrigerant Piping
Supply, Installation, Testing & Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with with Class-O closed cell elastometric nitrile rubber insulation of specified thickness as given below for Suction and Liquid lines, exposed piping shall be protected with UV & water protective coating, all accessories as per specifications etc. as required:
6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation (As per DSR_VRF/VRV _2019_5.1)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 245.00x363/289)=307.73
50
307
15386.5
... More
9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.2)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 331.00x363/289)=415.75
260
415
108095
... More
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.3)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 466.00x363/289)=585.32
90
585
52678.8
... More
15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.4)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 588x363/289)=738.56
150
738
110784
... More
19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.5)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate :707.00x363/289)=888.03
165
888
146524.95
... More
22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.6)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate :865.00x363/289)=1086.49
90
1086
97784.1
... More
28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.8) (As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 1108.00x363/289)=1391.71
65
1391
90461.15
... More
34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.10)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate x363/289)=1544.95
45
1544
69522.75
... More
41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.12)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate x363/289)=1644.18
50
1644
82209
... More
Drain Piping
Supplying & fixing of UPVC drain piping with all fitting such as bends, tees etc. necessary clamps, adequate support duly insulate with 9 mm nitrile rubber insulation complete as per technical specifications, requirement, standardard and drawings complete as required.
50 mm dia(As per MR-3) (Rate=298/1.18)
180
252
45457.2
... More
40 mm dia(As per MR-3) (Rate=204/1.18)
250
172
43220
... More
32 mm dia(As per MR-3) (Rate=157/1.18)
160
133
21288
... More
25 mm dia (As per MR-3) (Rate=121/1.18)
90
102
9228.6
... More
Inline Fans
Supply, Installation, testing and commissioning circular direct driven / cabinet inline fans of G.I. construction complete with centrifugal fan with motor, accoustically lined, canvass connection at inlet and outlet complete with electric panel with MCB and relays, with 5 Rm cabling and earthing complete as per standards, requirement and drawings. 3300 cfm 20 Make: Mitsubishi Electric/Panasonic/Daikin mmwg S.P(As per MR-4) (Rate=45163/1.18)
1
38273
38273.73
... More
800 cfm 15 mmwg S.P(As per MR-4) (Rate=23520/1.18) Make: Mitsubishi Electric/Panasonic/Daikin
1
19932
19932.2
... More
550 cfm 15 mmwg S.P(As per MR-4) (Rate=17064/1.18) Make: Mitsubishi Electric/Panasonic/Daikin
1
14461
14461.02
... More
500 cfm 15 mmwg S.P(As per MR-4) (Rate=17064/1.18) Make: Mitsubishi Electric/Panasonic/Daikin
3
14461
43383.06
... More
450 cfm 15 mmwg S.P(As per MR-4) (Rate=15743/1.18) Make: Mitsubishi Electric/Panasonic/Daikin
1
13341
13341.53
... More
400 cfm 15 mmwg S.P(As per MR-4) (Rate=15743/1.18) Make: Mitsubishi Electric/Panasonic/Daikin
1
13341
13341.53
... More
350 cfm 15 mmwg S.P(As per MR-4) (Rate=15743/1.18) Make: Mitsubishi Electric/Panasonic/Daikin
1
13341
13341.53
... More
300 cfm 15 mmwg S.P(As per MR-4) (Rate=14056/1.18) Make: Mitsubishi Electric/Panasonic/Daikin
1
11911
11911.86
... More
250 cfm 15 mmwg S.P(As per MR-4) (Rate=13102/1.18) Make: Mitsubishi Electric/Panasonic/Daikin
1
11103
11103.39
... More
200 cfm 15 mmwg S.P(As per MR-4) (Rate=13102/1.18) Make: Mitsubishi Electric/Panasonic/Daikin
1
11103
11103.39
... More
150 cfm 15 mmwg S.P(As per MR-4) (Rate=12662/1.18) Make: Mitsubishi Electric/Panasonic/Daikin
1
10730
10730.51
... More
100 cfm 15 mmwg S.P(As per MR-4) (Rate=12662/1.18) Make: Mitsubishi Electric/Panasonic/Daikin
2
10730
21461.02
... More
Propeller Type Fan
Supply, installation, testing and commissoning of propeller type fan for exhaust air complete with in and out gravity louvers, 3 pin socket with 5RM cabling complete as per specifications, requirement, standard and drawings. Make: Mitsubishi Electric/Panasonic/Daikin
200 mm dia, 5 mmwg S.P. (As per MR-5) (Rate=13039/1.18)
4
11050
44200
... More
Exposed Copper Pipe Coating
Supplying and fixing of UV/fire/water, thermal protective coating, with canvas/glass fibre cloth, coating on copper pipe insulation by wrapping canvas/glass fibre cloth dipped in star bond/poly bond 30-36 complete as per specifications and drawings.(The price should be quoted considering minimum 3 coats of 30-36 chemical). (As per MR-6) (Rate=587/1.18)
60
497
29847.6
... More
Packaged Type Airwasher
Supply, installation, testing and commissioning of floor mounted CELLULOSE FILL AIR-WASHER complete with double skin construction fabricated out of extruded aluminium sections with 0.8 mm thick pre-plasticised GI sheet on out side and 0.8 mm thick plane GI sheet inside with 25 mm thick insulation, 40 Kg / m3 density PUF insulation in between. The unit shall comprise of supply fan sections with DIDW backward curve fans (efficiency not less than 75%) suitable for static pressure as required, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% V, 50Hz, 3 Phase AC supply, giving 95% adiabatic saturation efficiency at 500 FPM air velocity across pads, factory assembled and complete with 16 gauge GI casing for Air washer section, 18G SS-304 water tank, Cellulose fill, water distribution header, PVC piping, butterfly valves, for quick fill, isolation of tank, pumps and brass strainers, Y strainers, fire rated flexible duct connections & aluminium volume control damper at blower discharge and necessary fittings, belt drive package, necessary vibration isolation arrangement etc. complete as per specification and of following capacities. The fan and motor shall be mounted on aluminium extruded section.The unit shall also include provision of GSS partitions duly reinforced at intake side of air washer and GSS louvers with bird-screen synthetic washable filters and four bend PVC drift eliminators and horizontal monoblock pumps of suitable rating, factory mounted on mild steel channel base with electric motor for circulation of water. Pumps shall be aligned and suitable for 415±10% volts, 50 cycles 3 phase power supply. One No. 3 phase isolator switch in weather proof enclosure shall be provided near motor complete as required confirming to specification.
3,000 CFM, 50 mmwg Static Pressure (As per MR-7) (Rate=205427/1.18)
1
174090
174090.68
... More
Exhaust Scrubber
Supply, installation, testing & commissioning of double skin exhaust scrubber of 0.6 mm inner and outer skin construction fabricated from precoated sheet blower housing with DIDW backward curved centrifugal blower with fan motor and belt drive arrangement with totally enclosed fan cooled class F insulation, with IP 55 protection, TEFC high efficiency motor type IE-3 suitable for 415+-10% volts, 50 HZ, 3 Phase A.C. supply, all accessories like common base frame, fan, motor pulley, belts, fire proof canvass connection, vibration isolator, prefilters, wet scrubber section, spray, nozzels, filters, M.S. frame for supports etc.complete as per specifications, requirement, standardard and drawings. Make: Mitsubishi Electric/Panasonic/Daikin
4,000 CFM, 65 mmwg Static Pressure (As per MR-8) (Rate=220100/1.18)
1
186525
186525.42
... More
Ducting
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
G.I. Sheet Metal Ducting (Rectangular)
Thickness 0.63 mm sheet (As per DSR_E&M _2022_16.12.1.1) (Rate=1080/1.12)
350
964
337501.5
... More
Thickness 0.80 mm sheet (As per DSR_E&M _2022_16.12.1.2) (Rate=1263/1.12)
965
1127
1088211.2
... More
Thickness 1.0 mm sheet (As per DSR_E&M _2022_16.12.1.3) (Rate=1381/1.12)
125
1233
154130
... More
Thickness 1.25 mm sheet (As per DSR_E&M _2022_16.12.1.4) (Rate=1836/1.12)
90
1639
147536.1
... More
Grilles / Diffuser
Supply, installation, testing and commissioning of Aluminium extruted powder coated supply and return air grilles/ diffusers as per specifications and drawings (Approval of colour shall be taken from Architects/Consultants). Make: Mitsubishi Electric/Panasonic/Daikin
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.(As per DSR_E&M _2022_16.15)
(Rate=9105/1.12)
125
8129
1016182.5
... More
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required. Make: Mitsubishi Electric/Panasonic/Daikin
(As per DSR_E&M_2022_16.16) (Rate=5910/1.12)
65
5276
342991.35
... More
Supply, fixing, testing & commissioning of Return air diffussers of powder coated aluminium without volume control dampers with anti smudge ring & removable core. Make: Mitsubishi Electric/Panasonic/Daikin
(As per DSR_E&M _2022_16.18) (Rate=8121/1.12)
85
7250
616325.65
... More
Louvers
Supply and fixing of Fresh / Exhaust air Aluminium extruded with bird screen, damper adjustable louvers as per specifications and drawings.(As per MR-9) (Rate=12986/1.18)
120
11005
1320609.6
... More
Volume Control Damper
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. Make: Mitsubishi Electric/Panasonic/Daikin (As per DSR_E&M _2022_16.13) (Rate=7046/1.12)
75
6291
471830.25
... More
Flexible Duct
Supply of 25 mm glass wool insulated double lamination of metalize polister film parmantely bounded to a coated spring wire, helix and resistant construction of tear and pincture branch and collor where ever suitable of following sizes. Connected at both ends with necessary jublie clamps
150 MM Dia(As per MR-10) (Rate=404/1.18)
40
342
13694.8
... More
Isolator
Supplying & installation of weather proof isolator with suitable rating near each outdoor unit and complete as required. 63 Amps(As per MR-11) (Rate=5136/1.18)
4
4352
17410.16
... More
40 Amps(As per MR-11) (Rate=5136/1.18)
8
4352
34820.32
... More
Control & Transmission Wiring
Supplying & fixing control cum transmission wiring of copper in heavy duty conduits PVC conduits between indoor and out door unit. Make: Mitsubishi Electric/Panasonic/Daikin (As per MR-12) (Rate=113/1.18)
1850
95
177156
... More
Sub Panel For Kitchen
Supply, installation,testing & commissioning of sub panel board cubical compartmentalised, weather proof Floor/ Wall mounted made of 2.0 mm thick steel sheet duly painted complete with voltmeter, ammeter, indicating lights for selector switch, incoming/outgoing feeders,NO/NC contactors, CTS contactors complete as per specifications and requirement
1 No. 32 Amps TPN incoming MCB
1 set 40 Amps TPN Aluminium conductor bus bar duly sleeved.
2 Nos. 25 Amps MCB outgoing along with 2 Nos. DOL starter for Scrubber Motor (5.5 kw) (1 No Spare). 2 Nos. 16 Amps MCB outgoing along with 2 Nos. DOL starter for Airwasher Motor (3.7 kw) (1 No Spare). Make: Mitsubishi Electric/Panasonic/Daikin
3 Nos. 6 Amps SPN MCB outgoing for Airwsher & Scrubber Pump.(0.37 / 0.55 kw) (1 No. Spare).(As per MR-13) (Rate=124723/1.18)
1
105697
105697.46
... More
Power Cabling
Supply & fixing of PVC sheathed Aluminium / Copper cables for various equipments through walls/ceiling with appropriate clamps & fixing arrangement as per specifications and drawings.
3C - 4 sqmm (Aluminium) for Airwasher & Scrubber(As per MR-14) (Rate=126/1.18)
50
106
5339
... More
3C - 2.5 sqmm (Aluminium) for Airwasher & Scrubber pump(As per MR-14) (Rate=117/1.18)
90
99
8923.5
... More
4C - 16 sqmm (Copper) (As per MR-14) (Rate=1102/1.18)
150
933
140085
... More
4C - 10 sqmm (Copper) (As per MR-14) (Rate=753/1.18)
60
638
38288.4
... More
Cable Tray
Supplying and installation of following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.
150 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.2) (Rate=604/1.12)
120
539
64714.8
... More
300 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.4) (Rate=777/1.12)
175
693
121406.25
... More
450 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.6) (Rate=1137/1.12)
60
1015
60910.8
... More
Earthing
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. (As per DSR_E&M _2022_5.15) (Rate=244/1.12)
295
217
64268.7
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.(As per DSR_E&M _2022_5.16) (Rate=70/1.12)
120
62
7500
... More
Ductable Split Unit
Supplying,installation,testing & commissioning of ductable type split unit air-conditioners with evaporator with coil, fan and fan motor, aircooled condenser with hermatically sealed scroll compressor, condenser coil, propeller fans controls, mounting stand for ODU, control panel, corded remote, canvass connection as per standards, requirement and drawings. Make: Mitsubishi Electric/Panasonic/Daikin
3.0 Tons(1 Working & 1 Standby) for Server Room(As per MR-15) (Rate=88040/1.18)
8
74610
596881.36
... More
Refrigerant Piping (For Split)
Supplying & installation copper soft/hard refrigerant piping along (Circuit length) with control cabling and earthing should be insulated with 9 mm thick pipe section of nitrile rubber complete in all respect.
3.0 Tons Ductable Split Unit(As per MR-16) (Rate=1981/1.18)
450
1678
755464.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%