Bareilly Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Bareilly Development Authority - BDA Tender
Civil And Construction
Building Construction
Eprocure
Opening Date14 Aug 2024
Closing Date3 Sep 2024
Tender Amount₹ 6,84,47,445
Costs
EMD
₹ 13,69,000Document Cost
₹ 25,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BDAUP_946276_1Bid Award Id
ViewTender No
T-15/2024/6Tender Authority
Bareilly Development Authority ViewPurchaser Address
-Website
http://http://www.bdainfo.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and fixing in Auditorium Flooring and Steps - Woven vinyl carpet floorings of vinyl woven series with roll dimensions of 1.8/2mtr meters width and length of 20 meters or Tiles size as per company standard should be approved by architect. 2.50-2.80 mm thickness to laid on hard, levelled, smooth and moisture free sub floor. Woven Vinyl flooring should have traffic classification 33 and weight of 2.7-3.5 kg/m2. Flooring should have caster chair EN-985 tested with color fastness of more than 6. It should be ASTME662 qualified on Smoke density test. Product must be fire rating of the product should be Bfl-S1. Any Joints in flooring rolls should be sealed with cold welding. This work will be inclusive of all Labour, Raw Material, Hardware, adhesive etc. complete. Carpet will be provided as per approved shade and colour in Approved Makes- Vibrant Floors/Armstrong Flooring/MAC ,as per the satisfaction of the Architect and Engg. Incharge.
Market Rate
1111.55
3390227
3050
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. Including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
D.S.R electrical Item No. 1.35
make:Schneider/Northwest
71
6671
93.97
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. make:Schneider/Northwest
D.S.R electrical Item No. 1.49
71
3195
45.01
Providing and fixing circular/Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3 mm dia round headed screwed, one loc at the conrners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
D.S.R electrical Item No. 14.15
71
10383
146.24
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Disect Current(BLDC) motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value(CM/M/W) minimum 6, Air delivery minimum 210 Cum/Min, 350 RPM(tolerance as per IS: 374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise= 75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
D.S.R electrical Item No. 19.1
make: Bajaj/Havells/Crompton
71
153056
2155.73
2" thick Slotted Wood Finish Wall Panel system on Masonry: Providing and fixing wall panelling on existing masonry with 50mm x 50mm Aluminium section framework of size 600mmx600mm grids and filled with acoustical insulation of 50 mm thickness 1000 gsm density from Star Insulation or Prime Insulation. The framework and acoustical infill is to be concealed behind the 15mm Slotted finish fire rated wood finish MDF panels from Topakustik, Wood Fit, Armstrong, Sound Slats, RPG or equivalent approved vendors. The perforated wood finish panels must have a minimum perforation area of 12% or higher and is to be supplied with black RP Tissue or equivalent of approved quality. This should be completed as per details and diagrams provided. Rate shall be inclusive of installation on the frame work arrangements. Works will be inclusive of scaffolding and staging at all levels. Rate shall include the preparation of detailed shop drawings as per site conditions, which shall be approved before
commencement of works
Make : Armstrong/ Saint Gobain
As per Ref. BOQ Item No. 1.26
99.92
549560
5500
ACOUSTIC DOOR WITH CHOWKHAT FOR DOOR OPENING SIZE 1.50M X 2.1M:
Providing, Supplying, Installation, Testing and fixing in position a 65 mm thick acoustic door with chowkhat. Door should have a 150 mm x 300 mm vision panel of
6.0 mm thick toughened glass. Both Shutters shall be made with 100mm x 50mm thick hardwood outer frame with 50 mm x 50 mm hardwood ribs at 500 mm c/c
bothways. All woodwork shall be treated with anti-termite treatment. The door shutter shall have 6 mm thick BWP grade plywood fixed on its both sides. All the cavities inside the door shall be filled with high NRC acoustic insulation materials (rockwook of 60 kg/m3 density) Insides of the door will be lined with 3mm thick MLV Sheet of minimum 1700 kg/m3 density. Periphery of the the shutter shall be covered with 12mm thick teakwood lipping matching with the door frame. The external faces of the door shutter will be finished with 1mm thick laminate on both sides. Teakwood lipping will be melamine polished. Weather seal of Rehau make shall be fixed on the door frame to fill the gap of shutter and wooden frame. Drop down seal to be fixed in shutter to block the gap with floor when the door is closed. The cost shall include all hardware fittings like heavy duty SS Hinges ( 4inch long - 5 per door) , 1ft long D type SS 304 Handles of Godrej/Hettich/Dorma make ( both inside and outside).
Make: Godrej
As per Ref. BOQ Item No. 1.19
5
200000
40000
Providing and fixing Godrej Kaditala 275 mm Chrome
Make: Godrej
As per Ref. BOQ Item No. 1.20
5
9000
1800
Providing and fixing hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, for door weight upto 80 kg to 100 kg and door width from 750 mm to 900 mm), with double speed adjustment with necessary accessories and screws etc. complete.
Make: Godrej
As per Ref. BOQ Item No. 1.21
5
15000
3000
Providing and Supplying factory made Podium table 8ft long x 2ft deep x 2.5ft high made with 25mm thick prelaminated HDF Board (all full round edges) with full Vanity panel on three sides and 3 internal vertical division panels of 1ft x 2.5ft for seating 3 persons on the TABLE. The design and color of the table will be as approved by the authorities.
The table will have provision for fixing electrical points.
The table will have provision for 8 Way LEGRAND POP-UP Box for
DATA/HDMI/ELEC. points. Make : Legrand/Schneider
As per Ref. BOQ Item No. 3.02
2
40000
20000
Providing and Supplying Podium Chairs ( Mid Back without wheels) of design and color approved by college authorities Make: Godrej/ Featherlite/ Geeken/ Durian Make
As per Ref. BOQ Item No. 3.03
12
78000
6500
Providing and Fixing PVC Wall Paneling with all complete fitting Make : Armstrong/Gyproc
Market Rate
99.92
118904
1190
Supplying of following LED fitting on recess/surface made of metallic CRCA powder coated steel / aluminium body, minimum system efficacy 100 Lumens/watt. Electronic in buit driver, PF0.9, suitable for 220V-240V 50Hz A.C. supply, in the existing false ceiling with S.S. chain hanging arrangements/ on surface as per site condition including making connections with 3x1.5sq.mm FRLS copper conductor cable in steel flexible pipe, testing and commissioning etc. required.
SITC of Step light Colour: Anthracite grey Material Aluminum Dimensions 201 x 91 x 35 Lamp Base LED Integrated
Wattage 5W ( (Equivalent to Philips Model No. B07LH1FXLR)
As per Ref. BOQ Item No. 2.26
30
45000
1500
Supplying of following dimmable LED fitting on recess/surface made of metallic CRCA powder coated steel / aluminium body, minimum system efficacy 100 Lumens/watt. Electronic in buit driver, PF0.9, suitable for 220V-240V 50Hz A.C. supply, in the existing false ceiling with S.S. chain hanging arrangements/ on surface as per site condition including making connections with 3x1.5sq.mm FRLS copper conductor cable in steel flexible pipe, testing and commissioning etc. required. SITC of Recessed mounted 24 watt LED down lighter made up of high pressure die cast aluminium housing complete as required. (Equivalent to Lighting Technologies,
MAke : Philips,Bajaj ) As per Ref. BOQ Item No. 2.25
30
150000
5000
Supplying of following LED fitting on recess/surface made of metallic CRCA powder coated steel / aluminium body, minimum system efficacy 100 Lumens/watt. Electronic in buit driver, PF0.9, suitable for 220V-240V 50Hz A.C. supply, in the existing false ceiling with S.S. chain hanging arrangements/ on surface as per site condition including making connections with 3x1.5sq.mm FRLS copper conductor cable in steel flexible pipe, testing and commissioning etc. required. Supply of 1200 mm long 20 watt LED luminiare (Make : Philips,Bajaj, Havelles LUMILINEPLUSBS20WLED865SPCSS)
As per Ref. BOQ Item No. 2.27
15
12375
825
Installation, Testing and Commissioning of BAJAJ single LED Signage BESL 03 LED SSD WBB GREEN above the exit doors of the auditorium including providing fixing neccassry base plate , point wiring, fitting fixture etc. complete.
MAke : Philips/Bajaj As per Ref. BOQ Item No. 2.28
20
12000
600
Supply installation testing of LEGRAND 8 WAY Conference Table POP UP BOX, with power , Lan , HDMI, Audio ,CGA & USB including all necessary associated hardware . Make : Legrand/Schneider
As per Ref. BOQ Item No. 2.29
2
12000
6000
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
2.1 (dsr hort. 2020)
2902.5
204190
70.35
Supplying and stacking of good earth at site including royalty and carriage
upto 5 km lead complete (earth measured in stacks will be reduced by
20% for payment).
2.2 (dsr hort. 2020)
1935
898652
464.42
Supplying and stacking sludge at site including royalty and carriage upto 5
km lead complete (sludge measured in stacks will be reduced by 8% for
payment).
2.3 (dsr hort. 2020)
967.5
256213
264.82
Supplying and stacking at site dump manure from approved source,
including carriage upto 5 km lead complete (manure measured in stacks
will be reduced by 8% for payment) :
2.4.1 (dsr hort. 2020) Screened through sieve of I.S. designation 20 mm
967.5
221480
228.92
Supply & plantation of Trees upto 8ft to 10ft height well settled, all indigenous varieties (local) as per listed below, location and quantities shall be as per drawing
Mangifera Indica (Mango), Bacopa Monnieri (Brahmi), Terminalia Tomentosa (Asna), Azadirachta Indica (Neem) & Bambusa Bambos (Baans)
Terminalia Arjuna (Arjun), Tectoria Grandis (Sagaun), Shorea Robusta (Saal), Stereospermum Tetragonum (Padal), Anogeissus Latifolia (Bakli), Madhuca Longifolia (Mahua) & Diospyros Malabarica (Gaub) Saraca asoca (ashok), Ficus religiosa (peepal), Ficus benghalensis (bargad), Aegle marmelos (bel) & Phyllanthus emblica (aonla) Pterocarpus Santalinus (rakta chandan), Butea monosperma (dhaak), Artocarpus altilis (kathal) & Santalum album (chandan) Saraca Asoka (Sita Ashok), True Cinnamon (Nag Kesar), Mangolia Champaca (Champa) & Mimusops Elengi (Maulsari) Saussurea Ggossypiphora (Mratyusanjeevani), Azadirachta Indiac (Neem) & Adiantum Venustum (Hansraj)
750
397500
530
Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in
499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area. (two application) i/c cost of chemical) and as per direction of officer-in-charge.and as per direction
of officer-in-charge.
2.56 (dsr hort. 2020)
2902.5
19737
6.8
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
2.33 (dsr hort. 2020)
6450
1245624
193.12
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) 2.13 (dsr hort. 2020)
1290
258941
200.73
Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).
2.25 (dsr hort. 2020)
645
143789
222.93
Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 4.88 (dsr hort. 2020)
350
14549
41.57
Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge. 4.91 (dsr hort. 2020)
250
7385
29.54
Providing and Displaying Cycus cirsnallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge. 5.13 (dsr hort. 2020)
30
52625
1754.18
Providing and Displaying Cyprus golden well shaped developed with good colored foliage fresh & healthy 60 to 75 cm ht in 30 cm Earthen Pot as per direction of the officer-in-charge. 5.17 (dsr hort. 2020)
120
46532
387.77
Providing and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-charge. 5.28 (dsr hort. 2020)
120
93063
775.53
Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.1 (dsr hort. 2020)
120
13078
108.99
Providing and stacking of Asparagus marrie, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.3 (dsr hort. 2020)
180
8917
49.54
Providing and stacking of Cuphea chinensis of ht. 20-30 cm full of branches and healthy foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.10 (dsr hort. 2020)
130
2341
18.01
Providing and stacking of Euphorbia milli hybrid variety, having ht. 30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 30 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
6.14 (dsr hort. 2020)
120
11349
94.58
Providing and stacking of Ophiopogon jaburan (variegated) ,full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 6.21 (dsr hort. 2020)
180
4863
27.02
Providing and stacking of Alstonia scholaris of height 150-165 cm. in bagof size 25 cm as per direction of the officer-in-charge. 7.4 (dsr hort. 2020)
90
5269
58.55
Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 7.8 (dsr hort. 2020)
90
4053
45.04
Providing and stacking of Butea frondosa (Flame of Forest) of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
7.13 (dsr hort. 2020)
90
4458
49.54
Providing and stacking of Cassia siamea of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 7.17 (dsr hort. 2020)
115
6733
58.55
Providing and stacking of lotus flower of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. Mr
45
30399
675.55
Providing and stacking of Bauhinia tomentosa (yellow) of height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. 8.2 (dsr hort. 2020)
265
10740
40.53
Providing and stacking of Calliandra hybrida of height 105-120 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge.
8.7 (dsr hort. 2020)
230
18646
81.07
Providing and stacking of Cassia laevigata of height 45-60 cm. in earthenpots of size 20 cm as per direction of the officer-in-charge. 8.11 (dsr hort. 2020)
150
4729
31.53
Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge. 8.14 (dsr hort. 2020)
190
5990
31.53
Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge. 8.54 (dsr hort. 2020)
180
6485
36.03
Providing and stacking of Allamanda violacea of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge. 9.2 (dsr hort. 2020)
170
6890
40.53
Providing and stacking of Clerodendrum thomsoniae of height 30 cm.to 45 cm in 20 cm size of poly bag & as per direction of the officer-in-charge.
9.6 (dsr hort. 2020)
120
4863
40.53
Providing and stacking of Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 9.14 (dsr hort. 2020)
90
2026
22.52
Providing and Stacking of Anjeer of height 75-90 cm. in poly bagsof size 25 cm as perdirection of the officer-in-charge. 11.1 (dsr hort. 2020)
110
14862
135.11
Providing and Stacking of Satavari, well developed in earthen pot of size 20 cm as per direction of theofficer-in-charge. 11.6 (dsr hort. 2020)
90
2431
27.02
Providing and Stacking of Sarpgandha well developed in poly bag of size 20 cm as per direction of theofficer-in-charge.
11.14 (dsr hort. 2020)
150
6756
45.04
Providing and Stacking of Aprajita Blue well developed in poly bag of size 20 cm as per direction of the officer-in-charge.
11.17 (dsr hort. 2020)
75
2026
27.02
Providing and Stacking of Aprajita White well developed in poly bag of size 20 cm as per direction of the officer-in-charge.
11.18 (dsr hort. 2020)
160
4323
27.02
IRRIGATION SYSTEM
DRIP IRRIGATION SYSTEM FOR PLANTATION - A
SYSTEM HEAD UNIT SNAD FILTER + BACKWASH ASSLY 2.5"
Make : Astral/Finolex
P.S.
2
88020
44010
SCREEN FILTER 2.5"
Make : Astral/Finolex
P.S.
2
14446
7223
ASSLY FOR FILTER 2.5"
Make : Astral/Finolex
P.S.
2
13366
6683
PRESSURE GAUGE + STOP COCK
Make : Astral/Finolex
P.S.
8
5512
689
PRV Make : Astral/Finolex
P.S.
2
52650
26325
NRV Make : Astral/Finolex
P.S.
2
33750
16875
NETWORK - FINOLEX HDPE & PVC PIPES
Make : Astral/Finolex
HDPE PIPE 75 MM PN4 (TANK TO PLOT)
P.S.
280.65
74372
265
PVC PIPE 75 MM 4KG/CM2
Make : Astral/Finolex
P.S.
375
70500
188
PVC PIPE 63 MM 4KG/CM2
Make : Astral/Finolex
P.S.
255
34170
134
EMITTING SYSTEM
Make : Astral/Finolex
FINOGOL PLAIN LATERAL 16 MM
P.S.
1200
20400
17
DRIPPER 8 LPH Make : Astral/Finolex
P.S.
1000
5000
5
START TO END SET FOR DRIP LINE 16 MM
Make : Astral/Finolex
P.S.
225
6300
28
BARBED COUPLER 16 MM
Make : Astral/Finolex
P.S.
160
1920
12
TEE 16 MM
Make : Astral/Finolex
P.S.
65
1235
19
ELBOW 16 MM
Make : Astral/Finolex
P.S..
75
1425
19
ELBOW 16 MM
Make : Astral/Finolex
P.S..
85
1615
19
BALL VALVE 63 MM
Make : Astral/Finolex
P.S.
15
14580
972
FLUSH VALVE 63 MM
Make : Astral/Finolex
P.S.
15
2025
135
VALVE BOX 12"
Make : Astral/Finolex
P.S.
15
31395
2093
Pump: Crompton Greaves 10.00 Hp pump with necessary accessories.(Market Rate) P.S.
2
198000
99000
Providing and fixing H.D.P. container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery upto destinatin hoisting and fixing of accessories such as inlet,outlet over flow of all tanks capacity above 1000 to 20,000 litres
Make : Astral/Finolex
D.S.R. 18.48
25000
208000
8.32
Water tank platform & Shed
Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means. (with prior permission of S.E.)
D.S.R. Item No. 2.2.1)
35
10462
298.94
Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.8
4.85
24984
5151.41
Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
D.S.R. 4.20.1.2
10
67955
6795.56
Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
D.S.R. 4.20.1.3
8
55734
6966.8
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
D.S.R. Item No. 5.22.1
1900
153881
80.99
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
Cement mortar 1:6 (1 cement : 6 coarse sand)
D.S.R. 7.1.1
16
88463
5528.96
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand)
D.S.R. 7.2.1
11.5
80664
7014.33
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
13.33.1 Flush/ Ruled pointing sqm
36
10492
291.45
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
SHS 60x60x3 Column (5.34Kg/mtr)
ISA 40X40X3 (1.83 Kg/mtr)
Cleat ( 35X35X3)
Base Plate ( 200x200x6) (7850 Kg/Cum)
Top Plate ( 200x200x6)
D.S.R. 10.20
1720
173909
101.11
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),
D.S.R. Item No. 12.1.1
115
126721
1101.93
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as
required. Make: Bose/D&B Audiotechnik
D.S.R. Item No. 17.3.1 (Electrical)
3
299459
99819.88
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
Make: Bose/D&B Audiotechnik
D.S.R. Item No. 17.3.2 (Electrical)
180
137161
762.01
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
Make: Bose/D&B Audiotechnik
D.S.R. Item No. 17.3.3 (Electrical)
90
127424
1415.83
Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.
Make: Bose/D&B Audiotechnik
D.S.R. Item No. 17.3.4 (Electrical)
60
115035
1917.26
Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as required.
Make: Bose/D&B Audiotechnik
D.S.R. Item No. 17.3.5 (Electrical)
60
87129
1452.16
Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC
supply complete as required. Make: Bose/D&B Audiotechnik
D.S.R. Item No. 17.3.6 (Electrical)
8
611495
76436.9
Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required. Make: Bose/D&B Audiotechnik
D.S.R. Item No. 17.3.7 (Electrical)
8
920998
115124.79
Supplying, installation, testing & commissioning of exit point directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns complete as required. Make: Bose/D&B Audiotechnik
D.S.R. Item No. 17.3.8 (Electrical)
12
96131
8010.95
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
Make: Bose/D&B Audiotechnik
D.S.R. Item No. 17.3.9 (Electrical)
8
516466
64558.26
Supply, installation, testing and commissioning of 25 mm Outer dia CPVC PIPE with end caps including making air sampling opening of appropriate dia on appropriate interval and all accessories as required,(rate for area protected in sqm).
Make : Astral/Finolex
D.S.R. Item No. 17.4.1 (Electrical)
250.65
11083
44.22
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
D.S.R. Item No. 17.5.1 (Electrical)
550
155914
283.48
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
D.S.R. Item No. 17.5.2 (Electrical)
680
92894
136.61
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed
steel conduit of following pairs, cores and size including connections and interconnections etc. as required.
Speaker cable Single pair, 2-core, 1.5 sqmm
D.S.R. Item No. 17.5.3.1 (Electrical)
280
11939
42.64
Speaker cable Two pair, 2-core, 1.5 sqmm
D.S.R. Item No. 17.5.3.2 (Electrical)
350
24598
70.28
Speaker cable Three pair, 2-core, 1.5 sqmm
D.S.R. Item No. 17.5.3.3 (Electrical)
250
24282
97.13
Speaker cable Four pair, 2-core, 1.5 sqmm
D.S.R. Item No. 17.5.3.4 (Electrical)
180
22456
124.76
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler
etc. as required.
D.S.R. Item No. 17.5.4 (Electrical)
180
7533
41.85
AUDIO , VIDEO & LIGHTING WORKS
SITC of Main FOH speaker having 12 inch woofer or better, min. 1.5-inch Compression driver ; Frequency Response : 82Hz-18kHz or better; Nominal Dispersion : 90˚ H x 60˚ V or better ; Power handling capacity : 250W or better; Nominal Impedance : 8Ω; Max SPL: 125 dB or better; Polyproylene enclosure, powder-coated finish; complete with all standard accessories as required.
Make: Philips, Sony or JVR
Rate as per Ref. BOQ Item No. 6.01
10
350000
35000
SITC of Mounting/ Hanging arrangement of speaker complete with all standard accessories as required. Heavy duty Powder coated MS frame /Bracket fixed with SS Dash Fasteners of HILTI / FISHER Make
Make: Bose/D&B Audiotechnik
Rate as per Ref. BOQ Item No. 6.02
10
75000
7500
SITC of Active Subwoofer having 18" single driver; Frequency Response : 47Hz- 105Hz or better; Max SPL (Peak) : 132dB or better; Power handing capacity : 1200W or better; complete with all standard accessories as required
Make:Philips, Sony or JVR
Rate as per Ref. BOQ Item No. 6.03
10
800000
80000
SITC of Active Stage Monitor Speaker System having 12" single driver; Frequency Response : 65Hz - 18kHz orbetter; Max SPL (Peak) : 126dB or better; Power handingcapacity : 1000W or better; complete with all standardaccessories as required.
Make: Philips, Sony or JVR
Rate as per Ref. BOQ Item No. 6.04
10
480000
48000
SITC of Dual-channel professional amplifier with 2 inputchannel, should have power output of 2x 350W @8Ω and2 x 660W @4Ω or better; Should have power outputBridged mode 2000W @4Ω Should have Frequencyresponse: 10Hz- 21kHz or better; Total harmonicdistortion (THD): ≤0.05% or better; Channelsperation(Crosstalk): ≤ -80 dB or better, S/N ratio 104dB or better, Built-in DSP feature complete with allstandard accessories as required. (Dynacord/Bose/Powersoft)
Make: Bose/D&B Audiotechnik
Rate as per Ref. BOQ Item No. 6.05
1
90000
90000
SITC of Loudspeaker Management System 2 x 6 loudspeaker management system having 2x line inputs, 6x balanced outputs, input impedance 50k Ω or better, CMRR: 45dB or better, Max. output level +22dBu or better, A/D performance Dynamic range 112dB Aweighted and D/A performance- Dynamic range 110dB Un- weighted or better complete with standard accessories as required.
Make: Bose/D&B Audiotechnik
Rate as per Ref. BOQ Item No. 6.06
1
30000
30000
SITC of 16 channel analog mixer with 8 mic/line input or better & 2 stereo output or better; 2 or better group buses; 3 or better AUX / FX send, Frequency response : 20Hz- 20kHz or better; Phantom power : 48V or better; THD : 0.03% or better; complete with all standard accessories.
Make: Bose/D&B Audiotechnik
Rate as per Ref. BOQ Item No. 6.07
5
225000
45000
SITC of Wireless Handheld microphone with Frequency response : 60Hz - 14kHz or better; Bandwidth: 24MHz; Total harmonic distortion (THD) : 0.9%; Signal to noise ratio : 103 dB; Pattern : Cardioid; Microphone type: dynamic; RF Power : 10mW or better; Operating time : 8 hours or better complete with all standard accessories.
Make: Bose/D&B Audiotechnik
Rate as per Ref. BOQ Item No. 6.08
5
120000
24000
SITC of Wireless Lavalier microphone with Frequency response : 60Hz - 14kHz or better; Bandwidth: 24MHz; Total harmonic distortion (THD) : 0.9%; Signal to noise ratio : 103 dB; Pattern : Omnidirectional; Microphone type: Condenser; RF Power :
10mW or better; Operating time : 8 hours or better complete with all standard accessories. Make: Bose/D&B Audiotechnik
(Shure /Sennheiser/ Clock Audio / ElectroVoice)
Rate as per Ref. BOQ Item No. 6.09
5
140000
28000
SITC of Wired handheld microphone with Frequency response : 50Hz - 16kHz or better; Pattern : Cardioid; Microphone type: Dynamic; Rugged metal housing; Sensitivity : 2.7mV/Pa or better, complete with all standard accessories. Make: Bose/D&B Audiotechnik
(Shure /Sennheiser/ Clock Audio / ElectroVoice)
Rate as per Ref. BOQ Item No. 6.10
10
50000
5000
SITC of CD player complete with all standard accessories
(Gemini/LG/Panasonic/Sony)
Rate as per Ref. BOQ Item No. 6.11
5
55000
11000
SITC of 4 Point XLR Junction Box complete with all standard accessories
Rate as per Ref. BOQ Item No. 6.12
10
40000
4000
SITC of 2 core 2.5 sqmm Speaker Cable complete with all standard accessories
Rate as per Ref. BOQ Item No. 6.13
500
50000
100
SITC of 2 core PVC insulated Microphone Cable complete with all standard accessories
Rate as per Ref. BOQ Item No. 6.14
1500
130500
87
SITC of Connector & Patch Cords complete with all standard accessories
Rate as per Ref. BOQ Item No. 6.15
5
40000
8000
SITC of 9U Equipment Rack for housing all rack mountable equipments with internal wiring, front glass door; heat dessipation fans; movement wheels, power distribution
units etc. complete with all standard accessories
Rate as per Ref. BOQ Item No. 6.16
5
60000
12000
SITC of 6000 lumens laser Projector with 0.67" DMD technology or better; Contrast ratio (Native): 2,000:1 or better; Resolution : WUXGA or better; Inputs : 2 x HDMI or better, 1 x VGA or better, 1 x HDBaseT or better, 2x Audio in, 1x Mic in, 1x Audio out(3.5mm jack). Should have Horizontal & Vertical Keystone correction ±30°; should have 10-bit color display; Control : RS232 etc. complete.
Make: Panasonic
Rate as per Ref. BOQ Item No. 6.17
2
600000
300000
SITC of Mounting/hanging arrangement of Projector complete with all standard
accessories.
Rate as per Ref. BOQ Item No. 6.18
2
20000
10000
SITC of 150" motorized projection screen with 16:10 aspect ratio complete with all standard accessories (Somfy motor)
Rate as per Ref. BOQ Item No. 6.19
2
70000
35000
SITC of Wall Plate type transmitter & Receiver extender with 1 x HDMI or better, 1 x VGA with audio input (Tx) or better, 1 x Twisted Pair output (Tx) or better; 1 x Twisted Pair Input (Rx) or better, 1x HDMI output(Rx) or better; transmission range :
70 meter or better; Auto-switching between inputs; Supports computer and video resolutions up to 4K or better; Max Data rate : 10.2 Gbps or better; HDCP 1.4 or better compliant; complete with all standard accessories.
Make :Extron/Crestron/Lightware / Liberty AV)
Rate as per Ref. BOQ Item No. 6.20
2
100000
50000
SITC of 1.8 meter HDMI-HDMI Cable complete with all standard accessories.
(Make: Belden/ Kramer / Liberty AV)
Rate as per Ref. BOQ Item No. 6.21
2
9000
4500
SITC of 1.8 meter VGA-VGA with audio Cable complete with all standard accessories.
(Make: Belden/ Kramer / Liberty AV)
Rate as per Ref. BOQ Item No. 6.22
2
8000
4000
SITC of of Twisted Pair Cable complete with all standard accessories
6.23
500
22500
45
SITC of 100W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 3 channel control Beam Angle of 9˚ / 25˚ / 45˚ Total Power Consumption of 165W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment
5 Pin XLR for DmX , Black powder coated body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015,
EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product.
(Make: Bajaj/Leksa Lighting / Kenson Solace / Aultra Lighting / Canara)
Rate as per Ref. BOQ Item No. 6.24
30
903420
30114
SITC of 200W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95, Strobe option Adjustable 1 ~ 25 times/
Sec 4 Kinds of dimming curves, Black finish housing, Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX
512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the key
presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 . CE Certification
compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product (eksa Lighting / Kenson Solace / Aultra Lighting / Canara)SITC of 200W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour
Temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95, Strobe option Adjustable 1 ~ 25 times/ Sec 4 Kinds of dimming curves, Black finish housing, Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX
512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the key
presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified)
Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 . CE Certification
compliant to EN60598-1:2015, EN61437-2-13:2014
LM79 Certificates from NABL Acrediated laboratory.
Brand embosed impact on the light body for genuine product
(Make: Bajaj /Philips/ eksa Lighting / Kenson Solace / Aultra Lighting / Canara)
Rate as per Ref. BOQ Item No. 6.25
20
900480
45024
SITC of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) (Leksa Lighting / Kenson Solace / Aultra Lighting / Canara) RGBW 3W Lamp source x 54 Pcs DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source Unlimited Color Mixing through DmX 0 ~ 100% Linear dimming , In built presets for different colors Strobe Mode 20 times/Sec Data DmX through 3 / 5 Pin
XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections High precision colors, IP20 protection
Powder coated Black finish housing Having Sound Control & Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited colour effects Rigidly built pressure die-casted Aluminium body.
RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL
Acrediated laboratory. Brand embosed impact on the light body for genuine product. Make: Bajaj/Philips
Rate as per Ref. BOQ Item No. 6.26
20
216420
10821
SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish. Safeworking load 150 KG Suitable to Batten of size 30 OD to 60 OD (Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara)
Rate as per Ref. BOQ Item No. 6.27
30
40560
1352
SITC of Light Fixture dual safety Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleve on the rope. Carabiner
Clip
(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )
Rate as per Ref. BOQ Item No. 6.28
30
17100
570
SITC of Fixed on stage Lighting bar/winch of 6 Mtr length constructed with an single contruction light bar Made out of 48mm Outer Dai, 40 Nominal Bore, Mild Steel Pip It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS angle which is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm.
Each fastnerMade out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe Dual Barrel Arrangement and an additional End Caps on the Pipe end Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions.
Suspender prices are included
(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )
Rate as per Ref. BOQ Item No. 6.29
10
155460
15546
SITC of Power Distribution Electrical panel having a Individual MCB control for 6 outgoing circuits Made up of MS Sheet metal fabricated housing Black powder coated Ivery connectors for the internal terminations and external outgoing connecting points, Fibre / brass glands of suitable size fitted MCB control for outgoing circuits. Custom built as per specification and project requirement.
(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )
Rate as per Ref. BOQ Item No. 6.30
10
335580
33558
SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20˚C to +70˚C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black
powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall / floor
fixing.
(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )
Rate as per Ref. BOQ Item No. 6.31
25
29400
1176
SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ), Total Max Rating 10A, 250V A.C 20˚C to +70˚C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing.
(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )
Rate as per Ref. BOQ Item No. 6.32
5
7150
1430
SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated,
fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing.
(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )
Rate as per Ref. BOQ Item No. 6.33
20
22760
1138
SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket & 1 No. DmX XLR Male Socket fitted on to a sheet metal fabricated compact Junction box powder coated with matt black texture finish paint. High temperature resistant
insulator material All metal housing offers best overall RF protection & electromagnetic shielding. Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing.
(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )
Rate as per Ref. BOQ Item No. 6.34
10
31120
3112
SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation Hardwares
Rate as per Ref. BOQ Item No. 6.35
10
203400
20340
SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat
dessipation provided with lid.
Rate as per Ref. BOQ Item No. 6.36
120
157200
1310
SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection for
Cross connecting DmX wiring connections.
(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )
Rate as per Ref. BOQ Item No. 6.37
50
26200
524
SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing.
(Make : Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )
Rate as per Ref. BOQ Item No. 6.38
20
11440
572
SITC of DmX Controller 12 Faders to control atleast 12 channels with Master control fader ,12 Set Scene saving options Master Fader Enabled Controller , LCD display access,Eeasy access key pads 12 Physical Fader unit for direct access Incremental Channel Up & Down Buttons DmX 512 protocol.
(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )
Rate as per Ref. BOQ Item No. 6.39
5
123635
24727
SITC of DmX Controller 12 Faders to control atleast 12 channels with Master control fader ,12 Set Scene saving options Master Fader Enabled Controller , LCD display access,Eeasy access key pads 12 Physical Fader unit for direct access Incremental Channel Up & Down Buttons DmX 512 protocol.
(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )
Rate as per Ref. BOQ Item No. 6.40
5
415765
83153
SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 1.5 Sq mm size.
Rate as per Ref. BOQ Item No. 6.41
1050
214200
204
SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmit DmX signal
Rate as per Ref. BOQ Item No. 6.42
750
228000
304
38 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=16415X38) Make: Daikin/Mitsubishi Electric
1
623770
623770
36 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=16415X36) Make: Daikin/Mitsubishi Electric
1
590940
590940
34 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=16415X34) Make: Daikin/Mitsubishi Electric
1
558110
558110
12 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=16415X12) Make: Daikin/Mitsubishi Electric
1
196980
196980
Indoor Unit Cassette Type
Supply, Installation, Testing & Commissioning of following minimum capacity 4-way flow VRF/VRF Cassette type indoor ceiling mounted unit equipped with synthetic washable media pre filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolator, cordess remote control etc., suitable for operation on single phase 230V + 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS system or fire panel of the building. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
Make: Daikin/Mitsubishi Electric
3.2 TR 4 Way VRV/VRF Cassette Unit(As per DSR_VRF/VRV _2019_2.8)
16
524592
32787
2.0 TR 4 Way VRV/VRF Cassette Unit(As per DSR_VRF/VRV _2019_2.5) Make: Daikin/Mitsubishi Electric
1
30801
30801
0.8 TR(As per DSR_VRF/VRV _2019_3.2)
Make: Daikin/Mitsubishi Electric
8
154496
19312
1TR(As per DSR_VRF/VRV _2019_3.3) Make: Daikin/Mitsubishi Electric
2
39400
19700
1.3TR(As per DSR_VRF/VRV _2019_3.4) Make: Daikin/Mitsubishi Electric
2
42352
21176
1.65TR(As per DSR_VRF/VRV _2019_3.6) Make: Daikin/Mitsubishi Electric
16
347936
21746
2.0 TR(As per DSR_VRF/VRV _2019_3.7) Make: Daikin/Mitsubishi Electric
4
88400
22100
Indoor Unit Ductable Type
Supply, Installation, Testing & Commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V + 10%, 50Hz, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS system or fire panel of the building. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
Mid Static Ductable Units (Minimum 45 Pascal External Static Pressure) Make: Daikin/Mitsubishi Electric
4.0 TR(As per DSR_VRF/VRV _2019_4.16)
1
48731
48731
High Static Ductable Units (Minimum 110 Pascal External Static Pressure) Make: Daikin/Mitsubishi Electric
5.5 TR(As per DSR_VRF/VRV _2019_4.17)
4
343064
85766
7.1 TR(As per DSR_VRF/VRV _2019_4.18) Make: Daikin/Mitsubishi Electric
1
87281
87281
8.0 TR(As per DSR_VRF/VRV _2019_4.19) Make: Daikin/Mitsubishi Electric
2
179180
89590
4.0 TR(As per DSR_VRF/VRV _2019_4.16) Make: Daikin/Mitsubishi Electric
21
1023351
48731
11.0 TR (Market Rate) Make: Daikin/Mitsubishi Electric
2
473704
236852
15.0 TR (Market Rate) Make: Daikin/Mitsubishi Electric
2
512000
256000
17.0 TR (Market Rate) Make: Daikin/Mitsubishi Electric
2
572000
286000
Supply Installation, testing & commissioning of Y-joints for various size of Refrigerant pipe including insulation. (As per MR-1) (Rate=4123/1.18)
60
209644
3494.07
Centralized controller
Supply Installation, testing & commissioning of Main Intelligent touch screen central controller system including all the accessories suitable to operate, monitor, on/off, temperature setting of all the indoor units individually complete as required and as specified. (As per MR-2) (Rate=80703/1.18)
2
136784
68392.37
Copper Refrigerant Piping
Supply, Installation, Testing & Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with with Class-O closed cell elastometric nitrile rubber insulation of specified thickness as given below for Suction and Liquid lines, exposed piping shall be protected with UV & water protective coating, all accessories as per specifications etc. as required:
6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation (As per DSR_VRF/VRV _2019_5.1)
60
14700
245
9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.2)
250
82750
331
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.3)
120
55920
466
15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.4)
165
97020
588
19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.5)
180
127260
707
22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.6)
120
103800
865
28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.8)
90
99720
1108
34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.10)
50
61500
1230
41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.12)
175
229075
1309
Drain Piping
Supplying & fixing of UPVC drain piping with all fitting such as bends, tees etc. necessary clamps, adequate support duly insulate with 9 mm nitrile rubber insulation complete as per technical specifications, requirement, standardard and drawings complete as required.
50 mm dia(As per MR-3) (Rate=298/1.18)
75
18940
252.54
40 mm dia(As per MR-3) (Rate=204/1.18)
50
8644
172.88
32 mm dia(As per MR-3) (Rate=157/1.18)
65
8648
133.05
25 mm dia (As per MR-3) (Rate=121/1.18)
75
7690
102.54
Inline Fans
Supply, Installation, testing and commissioning circular direct driven / cabinet inline fans of G.I. construction complete with centrifugal fan with motor, accoustically lined, canvass connection at inlet and outlet complete with electric panel with MCB and relays, with 5 Rm cabling and earthing complete as per standards, requirement and drawings. 3300 cfm 20 mmwg S.P(As per MR-4) (Rate=45163/1.18)
Make: Daikin/Mitsubishi Electric
1
38273
38273.73
800 cfm 15 mmwg S.P(As per MR-4) (Rate=23520/1.18) Make: Daikin/Mitsubishi Electric
1
19932
19932.2
550 cfm 15 mmwg S.P(As per MR-4) (Rate=17064/1.18) Make: Daikin/Mitsubishi Electric
1
14461
14461.02
500 cfm 15 mmwg S.P(As per MR-4) (Rate=17064/1.18) Make: Daikin/Mitsubishi Electric
3
43383
14461.02
450 cfm 15 mmwg S.P(As per MR-4) (Rate=15743/1.18) Make: Daikin/Mitsubishi Electric
1
13341
13341.53
400 cfm 15 mmwg S.P(As per MR-4) (Rate=15743/1.18) Make: Daikin/Mitsubishi Electric
1
13341
13341.53
350 cfm 15 mmwg S.P(As per MR-4) (Rate=15743/1.18) Make: Daikin/Mitsubishi Electric
1
13341
13341.53
300 cfm 15 mmwg S.P(As per MR-4) (Rate=14056/1.18) Make: Daikin/Mitsubishi Electric
1
11911
11911.86
250 cfm 15 mmwg S.P(As per MR-4) (Rate=13102/1.18) Make: Daikin/Mitsubishi Electric
1
11103
11103.39
200 cfm 15 mmwg S.P(As per MR-4) (Rate=13102/1.18) Make: Daikin/Mitsubishi Electric
1
11103
11103.39
150 cfm 15 mmwg S.P(As per MR-4) (Rate=12662/1.18) Make: Daikin/Mitsubishi Electric
1
10730
10730.51
100 cfm 15 mmwg S.P(As per MR-4) (Rate=12662/1.18) Make: Daikin/Mitsubishi Electric
2
21461
10730.51
Propeller Type Fan
Supply, installation, testing and commissoning of propeller type fan for exhaust air complete with in and out gravity louvers, 3 pin socket with 5RM cabling complete as per specifications, requirement, standard and drawings.
Make: Daikin/Mitsubishi Electric
200 mm dia, 5 mmwg S.P. (As per MR-5) (Rate=13039/1.18)
6
66300
11050
Exposed Copper Pipe Coating
Supplying and fixing of UV/fire/water, thermal protective coating, with canvas/glass fibre cloth, coating on copper pipe insulation by wrapping canvas/glass fibre cloth dipped in star bond/poly bond 30-36 complete as per specifications and drawings.(The price should be quoted considering minimum 3 coats of 30-36 chemical). (As per MR-6) (Rate=587/1.18)
60
29847
497.46
Packaged Type Airwasher
Supply, installation, testing and commissioning of floor mounted CELLULOSE FILL AIR-WASHER complete with double skin construction fabricated out of extruded aluminium sections with 0.8 mm thick pre-plasticised GI sheet on out side and 0.8 mm thick plane GI sheet inside with 25 mm thick insulation, 40 Kg / m3 density PUF insulation in between. The unit shall comprise of supply fan sections with DIDW backward curve fans (efficiency not less than 75%) suitable for static pressure as required, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% V, 50Hz, 3 Phase AC supply, giving 95% adiabatic saturation efficiency at 500 FPM air velocity across pads, factory assembled and complete with 16 gauge GI casing for Air washer section, 18G SS-304 water tank, Cellulose fill, water distribution header, PVC piping, butterfly valves, for quick fill, isolation of tank, pumps and brass strainers, Y strainers, fire rated flexible duct connections & aluminium volume control damper at blower discharge and necessary fittings, belt drive package, necessary vibration isolation arrangement etc. complete as per specification and of following capacities. The fan and motor shall be mounted on aluminium extruded section.The unit shall also include provision of GSS partitions duly reinforced at intake side of air washer and GSS louvers with bird-screen synthetic washable filters and four bend PVC drift eliminators and horizontal monoblock pumps of suitable rating, factory mounted on mild steel channel base with electric motor for circulation of water. Pumps shall be aligned and suitable for 415±10% volts, 50 cycles 3 phase power supply. One No. 3 phase isolator switch in weather proof enclosure shall be provided near motor complete as required confirming to specification. Make: Daikin/Mitsubishi Electric
3,000 CFM, 50 mmwg Static Pressure (As per MR-7) (Rate=205427/1.18)
1
174090
174090.68
Exhaust Scrubber
Supply, installation, testing & commissioning of double skin exhaust scrubber of 0.6 mm inner and outer skin construction fabricated from precoated sheet blower housing with DIDW backward curved centrifugal blower with fan motor and belt drive arrangement with totally enclosed fan cooled class F insulation, with IP 55 protection, TEFC high efficiency motor type IE-3 suitable for 415+-10% volts, 50 HZ, 3 Phase A.C. supply, all accessories like common base frame, fan, motor pulley, belts, fire proof canvass connection, vibration isolator, prefilters, wet scrubber section, spray, nozzels, filters, M.S. frame for supports etc.complete as per specifications, requirement, standardard and drawings.
Make: Daikin/Mitsubishi Electric
4,000 CFM, 65 mmwg Static Pressure (As per MR-8) (Rate=220100/1.18)
1
186525
186525.42
Ducting
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
G.I. Sheet Metal Ducting (Rectangular)
Thickness 0.63 mm sheet (As per DSR_E&M _2022_16.12.1.1) (Rate=1080/1.12)
1095
1055897
964.29
Thickness 0.80 mm sheet (As per DSR_E&M _2022_16.12.1.2) (Rate=1263/1.12)
3186
3592788
1127.68
Thickness 1.0 mm sheet (As per DSR_E&M _2022_16.12.1.3) (Rate=1381/1.12)
200
246608
1233.04
Thickness 1.25 mm sheet (As per DSR_E&M _2022_16.12.1.4) (Rate=1836/1.12)
110
180321
1639.29
Grilles / Diffuser
Supply, installation, testing and commissioning of Aluminium extruted powder coated supply and return air grilles/ diffusers as per specifications and drawings (Approval of colour shall be taken from Architects/Consultants).
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.(As per DSR_E&M _2022_16.15)
(Rate=9105/1.12)
1050
8535933
8129.46
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.(As per DSR_E&M
_2022_16.16) (Rate=5910/1.12)
960
5065718
5276.79
Supply, fixing, testing & commissioning of Return air diffussers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.(As per
DSR_E&M _2022_16.18) (Rate=8121/1.12)
131
949866
7250.89
Louvers
Supply and fixing of Fresh / Exhaust air Aluminium extruded with bird screen, damper adjustable louvers as per specifications and drawings.(As per MR-9) (Rate=12986/1.18)
6.5
71533
11005.08
Volume Control Damper
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. (As per DSR_E&M _2022_16.13) (Rate=7046/1.12)
70
440374
6291.07
Flexible Duct
Supply of 25 mm glass wool insulated double lamination of metalize polister film parmantely bounded to a coated spring wire, helix and resistant construction of tear and pincture branch and collor where ever suitable of following sizes. Connected at both ends with necessary jublie clamps
150 MM Dia(As per MR-10) (Rate=404/1.18)
25
8559
342.37
Isolator
Supplying & installation of weather proof isolator with suitable rating near each outdoor unit and complete as required. 63 Amps(As per MR-11) (Rate=5136/1.18)
6
26115
4352.54
40 Amps(As per MR-11) (Rate=5136/1.18)
5
21762
4352.54
Control & Transmission Wiring
Supplying & fixing control cum transmission wiring of copper in heavy duty conduits PVC conduits between indoor and out door unit. (As per MR-12) (Rate=113/1.18)
2560
245145
95.76
Sub Panel For Kitchen
Supply, installation,testing & commissioning of sub panel board cubical compartmentalised, weather proof Floor/ Wall mounted made of 2.0 mm thick steel sheet duly painted complete with voltmeter, ammeter, indicating lights for selector switch, incoming/outgoing feeders,NO/NC contactors, CTS contactors complete as per specifications and requirement
1 No. 32 Amps TPN incoming MCB
1 set 40 Amps TPN Aluminium conductor bus bar duly sleeved.
2 Nos. 25 Amps MCB outgoing along with 2 Nos. DOL starter for Scrubber Motor (5.5 kw) (1 No Spare). 2 Nos. 16 Amps MCB outgoing along with 2 Nos. DOL starter for Airwasher Motor (3.7 kw) (1 No Spare).
3 Nos. 6 Amps SPN MCB outgoing for Airwsher & Scrubber Pump.(0.37 / 0.55 kw) (1 No. Spare).(As per MR-13) (Rate=124723/1.18)
1
105697
105697.46
Power Cabling
Supply & fixing of PVC sheathed Aluminium / Copper cables for various equipments through walls/ceiling with appropriate clamps & fixing arrangement as per specifications and drawings.
3C - 4 sqmm (Aluminium) for Airwasher & Scrubber(As per MR-14) (Rate=126/1.18)
45
4805
106.78
3C - 2.5 sqmm (Aluminium) for Airwasher & Scrubber pump(As per MR-14) (Rate=117/1.18)
45
4461
99.15
4C - 16 sqmm (Copper) (As per MR-14) (Rate=1102/1.18)
165
154093
933.9
4C - 10 sqmm (Copper) (As per MR-14) (Rate=753/1.18)
75
47860
638.14
Cable Tray
Supplying and installation of following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.
150 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.2) (Rate=604/1.12)
265
142911
539.29
300 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.4) (Rate=777/1.12)
180
124875
693.75
450 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.6) (Rate=1137/1.12)
90
91366
1015.18
Earthing
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. (As per DSR_E&M _2022_5.15) (Rate=244/1.12)
280
61000
217.86
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.(As per DSR_E&M _2022_5.16) (Rate=70/1.12)
280
17500
62.5
Ductable Split Unit
Supplying,installation,testing & commissioning of ductable type split unit air-conditioners with evaporator with coil, fan and fan motor, aircooled condenser with hermatically sealed scroll compressor, condenser coil, propeller fans controls, mounting stand for ODU, control panel, corded remote, canvass connection as per standards, requirement and drawings.
Make: Daikin/Mitsubishi Electric
3.0 Tons(1 Working & 1 Standby) for Server Room(As per MR-15) (Rate=88040/1.18)
2
149220
74610.17
Refrigerant Piping (For Split)
Supplying & installation copper soft/hard refrigerant piping along (Circuit length) with control cabling and earthing should be insulated with 9 mm thick pipe section of nitrile rubber complete in all respect.
3.0 Tons Ductable Split Unit(As per MR-16) (Rate=1981/1.18)
180
302185
1678.81
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements