Bareilly Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Bareilly Development Authority - BDA Tender
Civil And Construction
Building Construction
Eprocure
Opening Date26 Jun 2024
Closing Date30 Jul 2024
Tender Amount₹ 10,49,88,576
Costs
EMD
₹ 21,00,000Document Cost
₹ 25,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BDAUP_933181_1Bid Award Id
ViewTender No
T-10/2024/13Tender Authority
Bareilly Development Authority ViewPurchaser Address
-Website
http://http://www.bdainfo.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size
Size of Tile 600 x 600 mm (Make : Simpole/RAK)
Ground Floor
D.S.R. Item No. 11.41A.3.1
138.19
153081
1107.76
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm Nos having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board Ground Floor
D.S.R. ITEM No. 12.45.3
167.2
193340
1156.34
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.S.R. Item No. 13.80
566.17
66813
118.01
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately) MArket Rate P.S.
250
1013550
4054.2
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.
D.S.R. Item No. 25.8
750
5389440
7185.92
Providing & Fixing Laminated Glass for the Purpose of Fin (8mm clear toughened glass+1.52mm EVA Film+8mm clear toughened glass) 17.52mm with all complete fitting
Market Rate
315
2527780
8024.7
Providing and fixing Stainless Steel H Shape Door Handle
MR
84
69300
825
Providing & Fixing Floor Lock MR
42
103950
2475
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. dsr 9.82
42
3863
91.99
Providing & Fixing 3HP Sewage Submersible Pump for Sump, STPM32-17, Head: 3-17 m
Make: Crompton/Kirlosker
M.R.
1
19500
19500
Providing & Fixing SUMP Pump Panel with all complete.
Make : Crompton/Kirlosker
M.R.
1
4500
4500
Providing and fixing 1200 mm high stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
D.S.R. Item No. 10.28
4851
2833517
584.11
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
On concrete work
D.S.R. Item No. 13.52.2
1921.6
341718
177.83
Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective
surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up Nos side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.
D.S.R. 16.50
450
70204
156.01
Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S.
angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge.
D.S.R. Item No. 16.61
8
49332
6166.53
Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per
direction of Engineer-in-charge and accordance with applicable specifications.
D.S.R. Item No. 16.62
250.6
141716
565.51
Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge.
D.S.R. Item No. 16.65
80
54702
683.78
Providing & Fixing Rubber Speed Breaker
Rate As per MES
220
431200
1960
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
Flamed finish granite stone slab Jet Black, Cherry Red, Elite
Brown, Cat Eye or equivalent.
D.S.R. Item No. 11.55.1
420.2
1012623
2409.86
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.D.S.R. Item No. 8.4
1985.2
853536
429.95
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.
D.S.R. Item No. 2.8.1
132.22
25769
194.9
Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.8
22.41
114300
5100.41
C.C. 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.3
0.66
3893
5898.93
Brick work in foundation 1st class b/work in 1:4cement and couarse sand mortar in fdn and plinth incl. supply of all materials , labour and t& P required for proper completion of the work
D.S.R. Item No. 6.2.1
37.85
184347
4870.47
Brick work in SUPER STRUCTURE in 23 cm thk wall with 1:4 cement and coarse sand incl. all materials labour annd t&p etc. for proper completion of work.
D.S.R. Item No. 6.4.1
15
104947
6996.47
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage and over lapping and hooks and authorised overlapping shall be measured . D.S.R. Item No. 5.22.1
25840.59
2072156
80.19
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriagefor all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.Concrete of M30 grade with minimum cement content of 350 kg /cum All works upto plinth level RCC as in fdns and footings of colums and plinth beam and bases of column. D.S.R. Item No. 5.33.1.2
46.47
335959
7229.59
Centering and shuttering including strutting, propping etc. and removal of form for wall
D.S.R. Item No. 5.9.7
489.02
280086
572.75
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25
D.S.R. Item No. 16.78.2
563.94
1235000
2189.95
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved (Rubber Moulded)color design and pattern.
DSR Item No. 16.91.2
876.44
716270
817.25
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approvedby Engineer-in-charge).
D.S.R. Item No. 16.69
14.26
108025
7575.43
Providing & Laying 100 to 125 Micron thick HDPE Sheet in CC Pathway base
Market Rate
1902.87
38057
20
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.Cement concrete prepared with batch mixing machine
D.S.R. Item No. 16.43.1
345.98
2727612
7883.73
Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete. (Tentative consumption is taken 100 ml per Bag of Cement)
D.S.R. Item No. 16.44
240
9972
41.55
Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete.New work (Two or more coats)
D.S.R. 16.47.1
685.9
96650
140.91
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work
D.S.R. Item No. 13.52.2
1729.88
304579
176.07
Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflectivesurface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up Nos side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.
D.S.R. 16.50
650
100399
154.46
Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S.angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge.
D.S.R. Item No. 16.61
12
73265
6105.47
Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as perdirection of Engineer-in-charge and accordance with applicable specifications.
D.S.R. Item No. 16.62
350.95
196500
559.91
Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge.
D.S.R. Item No. 16.65
90
60930
677.01
Providing & Fixing Rubber Speed Breaker As per MES
250
490000
1960
Providing and fixing Godrej Vigiguard Automatic Boom Barrier with all complete fitting
Make :Godrej
Market Rate
2
259480
129740
Providing and fixing Rectangle Car Park Display System, For Multi Purpose, Display Digit: 4 Market Rate
2
230000
115000
RAIN WATER HARVESTING RECHARGE PITS WITH DESILTING CHAMBER
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
D.S.R. Item No. 2.8.1
85.78
16718
194.9
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
All kinds of soil
D.S.R. ITEM No. (2.8.1) +(2.26.1)
79.24
22966
289.84
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
All kinds of soil
D.S.R. ITEM No. (2.8.1) +(2.26.1)+(2.26.1)
69.3
26665
384.78
Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.8
16.02
81708
5100.41
C.C. 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.3
5
29494
5898.93
Brick work in foundation 1st class b/work in 1:4cement and couarse sand mortar in fdn and plinth incl. supply of all materials , labour and t& P required for proper completion of the work
D.S.R. Item No. 6.2.1
5.42
26397
4870.47
Supplying & laying of drainage composite for use behind walls, between two different fills, alongside drains of road, below concrete lining of canals etc. Geocomposite for planar drainage, realized by thermobonding a draining core in extruded monofilaments with two filtering nonwoven geotextiles that may also be working as separation or protecting layers. The draining three dimensional core will have a “W” configuration as longitudinal parallel channels. Minimum thickness to be 7.2mm, with two filtering UV stabilized polypropylene nonwoven geotextile of minimum thickness of 0.75mm charecteristic opening size (O90) of 110 micron and tensile strength of 8.0 kN/m that will be working as separation or protecting layer, geocomposite having in plane flow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 18 kN/m , with mass per unit area of 740 gsm, supplied in the form of roll for easy transportation to site of work as per detailed specification all complete as per directions of Engineer in charge.
D.S.R. Item No. 26.16
141.72
104726
738.97
Supply & installation of Polymer based RAINMAXX Rainwater Harvesting Modules (Honeycomb design on Nos plate) made up of 100% recycled polypropylene capable of taking light vehicular movement upto atleast 30 tonnes / sqm with adequate backfilling & 4 small plates combination creating 3 spans inside the module. These modules are made from combination of large (683*410mm) and small (369*410mm) plates along with external locks. Nos large plate should have atleast fourteen external locking slots inorder to give stability to tank. These tank should have optimum connection & block stability using double lock stability. Nos single tank is made of four large and four small plates in case of single tank and 10 large & 12 small plates for triple tank. Capacity of single tank is (.683*.410*.450) equals to 0.126 CUM. Material : Recycled Polypropylene. Colour : Black.The RAINMAXX tank will be used as a retention tank to collect and hold the water. This will be installed underground and the top layer can be used for landscape/traffic/parking/storage etc. Water collected in the tank will percolate through the recharge well and artificially recharge the ground. (MR)
41.1
671985
16350
Providing, fixing, installing, testing & commissioning of FRP based Microfilter with diameter of 750 mm and height 1000 mm having inlet of 6 inches and outlet of 6 inches with SS 304 mesh . Flow rate of microfilter should be atleast 40 - 45 KL / Hr. ( FRP based RWH Filters should be GRIHA and SVAGRIHA Certified. The product should be registered under GRIHA Criterions 21 & 18 and SVAGRIHA Criterion 9. Certificate should be valid on the current date.) (MR)
2
153720
76860
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually. (DSR 23.2.1.1)
50
30911
618.23
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (150 mm nominal size dia) (DSR 23.4.2)
30
18137
604.57
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (DSR 23.5)
24.26
27424
1130.45
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction
of Engineer-in-charge. (DSR 23.6)
26.22
30198
1151.75
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. (DSR 23.7)
26.22
30198
1151.75
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. (DSR 23.8)
2
3031
1515.82
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar (DSR 19.15.1)
8
3262
407.84
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter (DSR 19.19.2.2)
4
3511
877.97
Landscaping works
Trenching in ordinary soil up to a depth of 60 cm including removal and
stacking of serviceable materials and then disposing of surplus soil, by
spreading and neatly levelling within a lead of 50 m and making up the
trenched area to proper levels by filling with earth or earth mixed with
sludge or / and manure before and after flooding trench with water (excluding
cost of imported earth, sludge or manure).
DSR Item no. 2.1 (dsr hort. 2020)
720.9
50715
70.35
Supplying and stacking of good earth at site including royalty and carriage
upto 5 km lead complete (earth measured in stacks will be reduced by
20% for payment).
DSR Item no. 2.2 (dsr hort. 2020)
368.45
171115
464.42
Supplying and stacking sludge at site including royalty and carriage upto 5
km lead complete (sludge measured in stacks will be reduced by 8% for
payment).
DSR Item no. 2.3 (dsr hort. 2020)
368.45
97572
264.82
Supplying and stacking at site dump manure from approved source,
including carriage upto 5 km lead complete (manure measured in stacks
will be reduced by 8% for payment) :
DSR Item no. 2.4.1 (dsr hort. 2020) Screened through sieve of I.S. designation 20 mm
265
60663
228.92
Supply & plantation of Trees upto 8ft to 10ft height well settled, all indigenous varieties (local) as per listed below, location and quantities shall be as per drawing
Mangifera Indica (Mango), Bacopa Monnieri (Brahmi), Terminalia Tomentosa (Asna), Azadirachta Indica (Neem) & Bambusa Bambos (Baans)
Terminalia Arjuna (Arjun), Tectoria Grandis (Sagaun), Shorea Robusta (Saal), Stereospermum Tetragonum (Padal), Anogeissus Latifolia (Bakli), Madhuca Longifolia (Mahua) & Diospyros Malabarica (Gaub) Saraca asoca (ashok), Ficus religiosa (peepal), Ficus benghalensis (bargad), Aegle marmelos (bel) & Phyllanthus emblica (aonla) Pterocarpus Santalinus (rakta chandan), Butea monosperma (dhaak), Artocarpus altilis (kathal) & Santalum album (chandan) Saraca Asoka (Sita Ashok), True Cinnamon (Nag Kesar), Mangolia Champaca (Champa) & Mimusops Elengi (Maulsari) Saussurea Ggossypiphora (Mratyusanjeevani), Azadirachta Indiac (Neem) & Adiantum Venustum (Hansraj) (palm)
500
238695
477.39
Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in
499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area. (two application) i/c cost of chemical) and as per direction of officer-in-charge.and as per direction
of officer-in-charge.
DSR Item no. 2.56 (dsr hort. 2020)
1200
8160
6.8
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
DSR Item no. 2.33 (dsr hort. 2020)
1200
231744
193.12
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) DSR Item no. 2.13 (dsr hort. 2020)
240
48175
200.73
Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).
DSR Item no. 2.25 (dsr hort. 2020)
120
26751
222.93
Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. DSR Item no. 4.88 (dsr hort. 2020)
150
6235
41.57
Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge. DSR Item no. 4.91 (dsr hort. 2020)
480
14179
29.54
Providing and Displaying Cycus cirsnallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge. DSR Item no. 5.13 (dsr hort. 2020)
90
157876
1754.18
Providing and Displaying Cyprus golden well shaped developed with good colored foliage fresh & healthy 60 to 75 cm ht in 30 cm Earthen Pot as per direction of the officer-in-charge. DSR Item no. 5.17 (dsr hort. 2020)
150
58165
387.77
Providing and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-charge. DSR Item no. 5.28 (dsr hort. 2020)
120
93063
775.53
Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. DSR Item no. 6.1 (dsr hort. 2020)
120
13078
108.99
Providing and stacking of Asparagus marrie, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. DSR Item no. 6.3 (dsr hort. 2020)
180
8917
49.54
Providing and stacking of Cuphea chinensis of ht. 20-30 cm full of branches and healthy foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. DSR Item no. 6.10 (dsr hort. 2020)
130
2341
18.01
Providing and stacking of Euphorbia milli hybrid variety, having ht. 30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 30 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
DSR Item no. 6.14 (dsr hort. 2020)
120
11349
94.58
Providing and stacking of Ophiopogon jaburan (variegated) ,full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. DSR Item no. 6.21 (dsr hort. 2020)
180
4863
27.02
Providing and stacking of Alstonia scholaris of height 150-165 cm. in bagof size 25 cm as per direction of the officer-in-charge. DSR Item no. 7.4 (dsr hort. 2020)
90
5269
58.55
Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. DSR Item no. 7.8 (dsr hort. 2020)
90
4053
45.04
Providing and stacking of Butea frondosa (Flame of Forest) of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
DSR Item no. 7.13 (dsr hort. 2020)
90
4458
49.54
Providing and stacking of Cassia siamea of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. DSR Item no. 7.17 (dsr hort. 2020)
115
6733
58.55
IRRIGATION SYSTEM
DRIP IRRIGATION SYSTEM FOR PLANTATION - A
SYSTEM HEAD UNIT SNAD FILTER + BACKWASH ASSLY 2.5" Make : Astral/Finolex (P.S.)
1
44010
44010
SCREEN FILTER 2.5"
Make : Astral/Finolex (P.S.)
1
7223
7223
ASSLY FOR FILTER 2.5"
Make : Astral/Finolex (P.S.)
1
6683
6683
PRESSURE GAUGE + STOP COCK
Make : Astral/Finolex (P.S.)
4
2756
689
PRV Make : Astral/Finolex (P.S.)
1
26325
26325
NRV
Make : Astral/Finolex (P.S.)
1
16875
16875
NETWORK - FINOLEX HDPE & PVC PIPES
HDPE PIPE 75 MM PN4 (TANK TO PLOT)
Make : Astral/Finolex (P.S.)
180
47700
265
PVC PIPE 75 MM 4KG/CM2
Make : Astral/Finolex (P.S.)
120
22560
188
PVC PIPE 63 MM 4KG/CM2
Make : Astral/Finolex (P.S.)
150
20100
134
EMITTING SYSTEM
Make : Astral/Finolex (P.S.)
FINOGOL PLAIN LATERAL 16 MM
600
10200
17
DRIPPER 8 LPH
Make : Astral/Finolex (P.S.)
250
1250
5
START TO END SET FOR DRIP LINE 16 MM
Make : Astral/Finolex (P.S.)
125
3500
28
BARBED COUPLER 16 MM
Make : Astral/Finolex (P.S.)
130
1560
12
TEE 16 MM
Make : Astral/Finolex (P.S.)
65
1235
19
ELBOW 16 MM
Make : Astral/Finolex (P.S.)
75
1425
19
ELBOW 16 MM
Make : Astral/Finolex (P.S.)
85
1615
19
BALL VALVE 63 MM
Make : Astral/Finolex (P.S.)
15
14580
972
FLUSH VALVE 63 MM
Make : Astral/Finolex (P.S.)
15
2025
135
VALVE BOX 12"
Make : Astral/Finolex (P.S.)
15
31395
2093
Pump: Crompton Greaves 5.00 Hp pump with necessary accessories.(Market Rate)
1
99000
99000
Water tank platform & Shed
Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means. (with prior permission of S.E.)
D.S.R. Item No. 2.2.1)
35
10462
298.94
Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.8
4.85
24984
5151.41
Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
D.S.R. 4.20.1.2
10
67955
6795.56
Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
D.S.R. 4.20.1.3
8
55734
6966.8
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
D.S.R. Item No. 5.22.1
1900
153881
80.99
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
Cement mortar 1:6 (1 cement : 6 coarse sand)
D.S.R. 7.1.1
16
88463
5528.96
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand)
D.S.R. 7.2.1
11.5
80664
7014.33
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
13.33.1 Flush/ Ruled pointing sqm
36
10492
291.45
Electrical works
Supply, Installation, Testing & Commissioning of HT metering cubical panel as approved By DISCOMs fabricated out of 14 SWG CRCA sheet steel in two compartment & MS angle of size 60mmX6mm having provision for Following: (i)Provision for fixing Trivector Meter (To be supplied by DISCOMs) (ii)Provision for fixing of combined CT PT Set (To be supplied by DISCOMs), (iii)TT Block, (iv) 6mm Bakelite sheet on all sides, (V) 3/6 core copper cable for interconnections etc. as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR E231300
1
21254
21254
Supply & Installation of D.P. Structure With AIR BREAK SWITCH having following specifications:- All as per pre
approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
DP : Double pole structure on 2 no ISMB 150 x 100 mm, 10 mtr high using 7 no MS channel Nos of size 100 mm x
50 mm x 2500 mm complete in all respect with nuts, springs washers, clamps as required.
GO:Off load type gang operated 3-pole vertical flute type switch suitable for 11KV ; 400A ,3-ø, central post
rotating double break isolator complete with MS hardware , copper moving & fixed contact ,assembly of 9 nos pin insulator ,GI pipe of suitable length for operation.
DO: 3nos Vertical / Horizontal mounted 11kv horn gap fuse set /drop out 11kv barrel fuses mounted on 6no pin
insulators
LA: 3 piece non linear resistor type. lighting arrestor of approved make suitable for 3 wire, 11kv Overhead line with rated voltage of 9kv rms & nominal discharge current rating of 5 ka & complete with galvanized clamping arrangement GI bolts, nuts, washer etc as
required.
JUMPERS: 3 no 11kv acsr conductors mounted on pin type insularors as required. .GENERAL:The go shall be
operated by hand operated liver properly earthed with provision for locking mounted at 3 E230400
1
63624
63624
Supply , Installation, Testing and Comissioning of 11KV, 630 A, 25 kA / 1 Sec, SF6 / VCB Indoor type panel HT board, free standing motor operated & withdrawal type fabricated from 2 mm thick CRCA sheet steel , With Ammeter, Voltmeter, PF Meter, KWH Meter, MDIMeter, Selector Switches as required, CRT-CT of required ratio ( 15VA ; Cl-1.0 / 0.5 ) PT (11 KV /110V/√3) , Fuses , IP42 Protection, 4 / 8 /10 / 12-window Annunciation Panel , AC/ DC Control voltage 24/48/ 110/230V , LED Indication lamps , S/C, O/C & E/F Protection (IDMT) Relays Alarm & trip contacts for Transformer protection ( High oil temperature , Buchholz protection ,high winding temperature), power pack 2 x 12 V,etc complete in all respect Ready To Use(RTU),OEM Must have BIS certificate and & shall have submit NABL / CPRI / ERDA lab type test reports before execution complete in all respect. All as per pre pproved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR.
E230500
1
432733
432733
D. Electronic / Mechanical governor, Manual & electric Start ,Batteries with battry charger, Engine instruments panel,AVM pads All controls for operation of DG set are from outside the enclosure with DG control panel having Microprocessor based Gensetmonitoring & control system, MCCB/ACB of suitable rating, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level shall be lessthan 75 dB at a distance of 1 Mtrs. duly certified by authorisedagency etc. complete in all respect of following capacity :E. (A) Accoustic glass wool wall thickness should not be less then40mm and not less then 20mm PU foam upto rating 100 KVA.(B).Accoustic glass wool wall thickness should not be less then65mm and not less then 50mm PU foam upto rating 250 KVA.(C)Accoustic glass wool wall thickness should not be less then100mm for rating above 250 KVA.F. First filling of the fuel tank shall be done by contractor and the prevailing fuel cost at that time shall be reimbursed to the contactorby department.G. Servicing of the DG set (as per OEM guidelines) during the DLPperiod shall be done by contractor including all consumables,actualcharges shall be reimbursed to the contractor by department/clientcomplete in all respect.H. OEM Must have BIS certificate and & shall have submit NABL /CPRI / ERDA/ CPCB standards approved lab type test reportsbefore execution as required complete in all respect. All as per preapproved by Engineer in charge. For additional technicalparameters of products/ work. 365-400 kVA, 292-320 kWe Prime Market Rate
4
12800000
3200000
Supply , Installation, Testing and Comissioning of Synchronization panel complete in all respect suitable for following capacity DG sets. OEM Must have BIS certificate and & shall have submit NABL / CPRI / ERDA lab type test reports before execution as required complete in all respect. All as per pre approved by Engineer in charge.400KVA Make: Cummins
Market Rate
2
1300000
650000
Supply, Installation, Testing and Commission of indoor type floor mounted metal clad, 11 KV Outgoing VCB panel UPTO 630A equipped with following switchgears and accessories designed & tested as per latest standard i.e. IEC 62271-200, suitable for STC 25KA/3 and IAC A-FLR for 25kA/1sec.Make of Panel, Vaccum Interrupter and VCB
should be of same make. Make: Cummins
1. 11 KV , analog/digital type, selector switch for voltmeter and protection fuses/MCB for HT metering upto 12 KV on outgoing 2. Ammeter, analog type, selector switches for ammeters. 3. Microprocessor based numerical relay with O/L, E/F and S/C protection. 4. Set of dual core dual ratio 3CTs of suitable ratio with sec 1 A of 15 VA burden and accuracy Class – 0.5 for metering and class 5P10 for protection 5. Multifunction Meter E234302
Outgoing upto 630 A VCB
1
448444
448444
SITC of battery bank of min 150 AH capacity comprising SMF/VRLA batteries , MS / Teakwood battery stand ,
interconnect wiring etc as required complete in all respect of rating: E235301
24 V DC
1
80017
80017
SITC of FCBC ( Float cum boost charger)suitable for 415V +/-10%, 50 Hz , 1-ǿ / 3 -ǿ Input & 24/ 48 /110 V DC OutputNatural Cooled, free standing in Sheet Steel enclosure,SCR controlled , regulation +/-1% , Efficiency 75% on FLAC/ DC Instruments, Selector Switch
,Built in DC Distribution Board (6 No MCB), indication , control as required of following rating: E235401
15A + 15A
1
76324
76324
Providing & Laying XLPE insulated as per IS:7098/II/85 H.T.cable as per PWD specification for electrical Works for working voltage 11 K.V.(E) in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench with filling of excavated earth in trench , on existing cable trays or on surface etc. including making necessary connection, testing etc. as required of size as per points (a), (b), (c) mentioned below:- (a) Material :- H4- Grade aluminium conductor of purity 99.6 % & as per IS:1554 P-I / IS :7098 P - I
(b) conductor shall have electrolytic aluminium confirming to IS
8130, IS 3975-1999 for armouring of cables , IS 5831 for sheath, IS
10810 (Part 0 to 64 ) for testing procedures (c) OEM Must have ISO 9001 & 14001 certifications for quality assuarance & its own in house NABL lab setup for all testing facilities for cables . All above as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
3 core 300.0 Sq.mm E130105
500
682000
1364
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/ joint kit as per PWD specification for electrical Works suitable for 11 KV / 33 KV cable with required components, prepration of cable ends. Type test report should be as per IS13573:2011 which covered all sequence for table 2 for termination kit and table 3 for streight through joint inclusive thermal & dynamic short circuit test, humidity test, soil fog test. Cross linking shall be done out side factory with E- beam/ peroxide technology. Extrusion process shall be in house OEM within same vicinity. OEM test lab should be as per ISO 9001:2015 & 14001 : 2015 & reports submitted to engineer in charge including testing etc. as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work refer Annexure "A" attached with this BSR . ,
11 KV End Termination Kit Outdoor type E131324
3 core 240/300 Sq.mm
2
11056
5528
11 KV Straight Through Joint Kit E131334
3 core 240/300 Sq.mm
2
25356
12678
11 KV End Termination Kit Indoor type E131314
3 core 240/300 Sq.mm
3
13272
4424
Supply and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable, for 3 core 300 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required.
D.S.R. 10.4.4
2
25661
12830.95
Supply and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable, for 3 core 300 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required.
D.S.R. 10.5.4
2
35999
17999.97
Supply installation testing & Commissioning of star rated Copper wound distribution Transformer ( All the distribution transformer must be star rated as per notification of (BEE) ministry of power, Goverenment of India) of following rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11, ONAN Cooled & as per BEE star level- 2 & BIS approved as per IS 2026-1977 & losses as defined as per IS 1180 part I 2014. including standard accessories like conservator, silica gel breather,Bucholz relay, radiator, fins, HT cable box & LT cable boxes, Off - LTC (+5% to - 10% @ 2.5%) temperature rise of 40 degree C in oil / 45 degree C in winding , ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953 , Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer complete in all respect. NABL accredeated / CPRI/ ERDA lab testing reports with OEM certificate must submitted to engineer in charge .Transformer must be tested from CTL test lab of discom (if reqd.) before charging of transformer & complete installaion must be certified from Electrical Inspectorate office as per Indian Electricity rule, CTL testing charges & Inspection charges shall be reimbursed by the department to the contractor as per actual expenditure. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . E230116
1600 KVA
1
2052513
2052513
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
D.S.R. 2022 (Electrical) Item No. 5.4
10
59002
5900.23
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
D.S.R. 2022 (Electrical) Item No. 5.6
8
87416
10927.12
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
D.S.R. 2022 (Electrical) Item No. 5.20
150
250278
1668.52
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
D.S.R. 2022 (Electrical) Item No. 5.15
260
50094
192.67
Supply and laying of 32mm x 6mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
D.S.R. 2022 (Electrical) Item No. 6.14
100
15398
153.98
Supply and Laying of 32mm X 6 mm Copper strip from earth electrode directly in the ground as required complete in all respects.
PWD SOR ITEM NO. 718
60
66600
1110
Supply and laying of 25mm x 5mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
D.S.R. 2022 (Electrical) Item No. 5.10
260
318432
1224.74
Supply and fixing of one number 6 SWG G.I wire in 15mm dia. G.I pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.
D.S.R. 2022 (Electrical) Item No. 5.12
780
176771
226.63
Supply and burying earth for lighting conductor of 900mm x 900mm x 3mm copper plate vertically with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe for watering funnel, 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect.
PWD SOR Elctrical (2018) Item No. 709
2
35600
17800
Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm G.I. strip, G.I. clamps on surface
complete in all respects as approved by Engineer-in-charge. PWD SOR Elctrical (2018) Item No. 710
200
34000
170
Supply and fixing of vertical air termination final rod comprising of 300mm long x 25mm dia. Copper rod with one pointed prong and 100mm dia x 3 mm thick base plate etc. complete in all respect. PWD SOR Elctrical (2018) Item No. 712(A)
2
2660
1330
Supply and fixing of vertical down conductor of 32mm x 6mm G.I. strip etc. on approved clamps on surface for
lightning conductor complete in all respects (for two storeyed Buildings).
PWD SOR Elctrical (2018) Item No. 713
50
15500
310
As in item 713(A) but for five and above storeyed building
PWD SOR Elctrical (2018) Item No. 713A
550
214500
390
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12 mm thik) having 3mm thikness with Single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect.
PWD SOR Elctrical (2018) Item No. 641
14
231000
16500
Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. Confirming to IP 66 and above protection complete in all respect.
PWD SOR Elctrical (2018) Item No. 1421
14
69160
4940
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
D.S.R. 2022 (Electrical) Item No. 2.10.4
14
11132
795.17
Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN complete in all respect.
25 Amp SPN PWD SOR Elctrical (2018) Item No. 807 (b)
2
35600
17800
Supply and fixing of Backclite sheet 3 mm thick of suitable size & connector
N.S
14
1400
100
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 70 to 90 Watt. Confirming to IP 65 protection complete in all respect. CAT-AAA
PWD SOR Elctrical (2018) Item No. 1452
6
42660
7110
SUBHEAD V-CABLES
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the
300 sqmm 3.5 core PWD SOR Elctrical (2018) Item No. 501(s)
500
806500
1613
240 sqmm 3.5 core PWD SOR Elctrical (2018) Item No.501®
450
620550
1379
185 sqmm 3.5 core PWD SOR Elctrical (2018) Item No. 501(q)
100
114000
1140
70 sqmm 3.5 core
PWD SOR Elctrical (2018) Item No.501(m)
1050
643650
613
35 sqmm 3.5 core PWD SOR Elctrical (2018) Item No. 501(k)
200
84400
422
25 sqmm 3.5 core PWD SOR Elctrical (2018) Item No.501(j)
600
223800
373
10 sqmm 4 core PWD SOR Elctrical (2018) Item No.501(h)
200
65400
327
Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire
300 sqmm 3.5 core
PWD SOR Elctrical (2018) Item No. 503(s)
20
10100
505
240 sqmm 3.5 core PWD SOR Elctrical (2018) Item No. 503(r)
12
5676
473
185 sqmm 3.5 core PWD SOR Elctrical (2018) Item No. 503(q)
4
1588
397
70 sqmm 3.5 core
PWD SOR Elctrical (2018) Item No. 503(m)
36
7164
199
35 sqmm 3.5 core PWD SOR Elctrical (2018) Item No. 503(k)
6
1068
178
25 sqmm 3.5 core
PWD SOR Elctrical (2018) Item No. 503(j)
20
2460
123
10 sqmm 4 core
PWD SOR Elctrical (2018) Item No. 503(h)
8
696
87
Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.
300 sqmm PWD SOR Elctrical (2018) Item No.504(n)
20
7840
392
240 sqmm PWD SOR Elctrical (2018) Item No. 504(m)
12
3264
272
185 sqmm PWD SOR Elctrical (2018) Item No. 504(l)
4
772
193
70 sqmm
PWD SOR Elctrical (2018) Item No. 504(h)
36
2412
67
35 sqmm PWD SOR Elctrical (2018) Item No.504(f)
6
186
31
25 sqmm PWD SOR Elctrical (2018) Item No.504(e)
20
540
27
10 sqmm
PWD SOR Elctrical (2018) Item No. 504(c)
8
160
20
SITC of wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as per PWD specification for electrical Works, made out of CRCA sheet . Other parameters required as per point (a) ,(b), (c), (d) below:-
(a) Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of
2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors with / without detachable extension type structure(b) panel shall be duly treated for derusting in 7 tank process with dephosphating and with powder coating of minimum 70 microns on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness ,required hardware, separate detachable gland plate M.S. base channel (min75mm) , hinged door with locking arrangement for equipment/switchgear.
(c) Interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 125 amp ) and by solid bus bar (125 amp ) . All joints / interconnections of copper bus bar shall be dully tinned . Clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves . Earth and Neutral bus bar shall be half of the size of phase bus bar. (d) only outer area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator. All as per drawing pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
12
42492
3541
Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2) / Copper (IEC 60028) bus bar as per PWD specification for electrical Works, by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer
Annexure "A" attached with this BSR .
Electrolytic grade (Cu-ETP) Tin Coated annealed copper bus bars IACS 100% grade
380
311600
820
SITC by suspension on ceiling testing and commissioning of following capacity sandwitch type rising mains for use on 3 phase 4 wire 415 volts 50Hz AC supply with metal clad enclouser having IP-54 rating after fixing the tap offbox and all accessories made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 no. aluminium bus bars having current density of 130A /Sq cm at nominal current rating necessary joints elbow joints & expansion joints and bends fire barrier at Nos floor provision of tapping at every meter adopter box and copper flexible for joints continuous earthing with 2 no. almunuum strip of suitable size including GI clamping brackets suspenders angle iron bracket steel fasteners connecting to earthing system etc as required. 3200 A 50kA for 1 Sec
Make:Schneider/Northwest D.S.R. 2022 (Electrical) Item No. 3.13.10
100
4399589
43995.89
Supplying installation including suspension testing and commissioning of following capacity sandwitch type rising mains for use on 3 phase 4 wire 415 V 50 Hz AC supply with metal clad enclouser having IP 54 rating after fixing the tap off boxes and all accessories made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating necessary joints elbow joints & expansion joints and bends fire barrier at Nos floor provision of tapping at every meter adopter box and copper flexible for joints continuous earthing with 2 Nos. aluminium strip of suitable size including GI clamping brackets suspenders angle iron bracket steel fasteners connecting to earthing system etc. as required.
1000A Isc= 50kA for 1 Sec
Make:Schneider/Northwest D.S.R. 2022 (Electrical) Item No. 3.13.5
5
95460
19092.05
1600A Isc= 50kA for 1 Sec
Make:Schneider/Northwest D.S.R. 2022 (Electrical) Item No. 3.13.7
2
49607
24803.56
Providing and fixing following rating and breaking capacity and pole MCCB with thermomegnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel making connections etc.
as required.
Make:Schneider/Northwest D.S.R. 2022 (Electrical) Item No. 2.2.13
22
134165
6098.43
125Amp 30 kA FP MCCB
Make:Schneider/Northwest D.S.R. 2022 (Electrical) Item No. 2.2.14
2
12964
6482.2
200Amp 30 kA FP MCCB
Make:Schneider/Northwest D.S.R. 2022 (Electrical) Item No. 2.2.15
6
72044
12007.35
250Amp 30 kA FP MCCB
Make:Schneider/Northwest D.S.R. 2022 (Electrical) Item No. 2.2.17
8
116305
14538.16
Supply and fixing of following accessories for Moulded case circuit breaker (MCCB) compatible to main MCCB OEM as per PWD specification for electrical Works, conforming to IS/IEC 60947 P - 2 :2003 including making connection etc complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . E090700
Make:Schneider/Northwest Shunt Trip Release E090701
Make:Schneider/Northwest
38
67944
1788
Under Voltage Release E090702
Make:Schneider/Northwest
38
83334
2193
Earth Fault Release E090703
Make:Schneider/Northwest
38
66462
1749
Extended Rotary Handle E090704
Make:Schneider/Northwest
38
80674
2123
Direct Rotary Handle E090705
Make:Schneider/Northwest
38
50616
1332
Auxiliary contact E090710
Make:Schneider/Northwest
38
44042
1159
Trip Alarm contact E090711
Make:Schneider/Northwest
38
42522
1119
Auxiliary + Trip alarm contact E090712
Make:Schneider/Northwest
38
58596
1542
Phase Barriers up to 630A, 3/4Pole MCCB E090713
Make:Schneider/Northwest
38
6004
158
Providing & Fixing of self healing IP20 MPP type shunt capacitor (banks) as per PWD specification for electrical Works, ISI marked IS:13340-41 / conforming to IEC :831-1&2 OR IEC : 60831-1& 2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD) and shall have dissipation factor less than 0.0025 at 50 Hz and total wattage loss less than 0.35 Watt per KVAR. Min over current capacity 1.8 times rated current & peak inrush current min. 250 times of rated current, including making connections, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
Heavy duty Three phase 525 V, 50 Hz cylindrical capacitor (Bank) E081302
450
171450
381
Providing & Fixing of ISO certified company made Cam operated rotary (Auto/manual) switches on existing panel with 2 way and off position using high grade engineering material to international standards with cam assembly insulation of glass filled polyamide with high tracking index. For reliable and stable electrical and mechanical endurance double butt contacts with silver bi-metal on copper should provided . contact assembly is of operating temp range -25 degree C to 55 degree C, frequency upto 10 KHz. switch life under std. op. conditions shall be mechanically minimum 50000 operations @300 cycles/ hour and electrically 10,000 operations at 100% rated duty for 100 cycles/ hour including making connection etc. as required . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . E081402
12 to 14 stage
1
16017
16017
Providing & Fixing of ISO certified company made Cam operated rotary (Auto/manual) switches on existing panel with 2 way and off position using high grade engineering material to international standards with cam assembly insulation of glass filled polyamide with high tracking index. For reliable and stable electrical and mechanical endurance double butt contacts with silver bi-metal on copper should provided . contact assembly is of operating temp range -25 degree C to 55 degree C, frequency upto 10 KHz. switch life under std. op. conditions shall be mechanically minimum 50000 operations @300 cycles/ hour and electrically 10,000 operations at 100% rated duty for 100 cycles/ hour including making connection etc. as required . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . E081501
10 AMP
10
2610
261
32 AMP E081501
4
1212
303
63 AMP E081503
4
1764
441
Providing & Fixing of AC operated heavy duty 230 /440 Volt power contactor as per PWD specification for electrical Works, ISI marked IS/IEC 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, Din rail mounting type including making connections, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
3 pole Power contactor swith following AC 3 Rating E0816102
13 to 25 Amp
10
9720
972
50 Amp E0816105
4
18212
4553
95 Amp E0816108
4
28280
7070
Providing & Fixing of AC operated heavy duty 230 /440 Volt power contactor as per PWD specification for electrical Works, ISI marked IS/IEC 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, Din rail mounting type including making connections, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
3 pole Power contactor swith following AC 3 Rating E081703
10 kVar
10
15600
1560
25.0 kVar E081707
4
12128
3032
50.0 kVar E081710
4
32748
8187
Providing & Fixing of thermal over load relay with built in single phase protection and having at least 1NO & 1NC contacts, manual /auto reset facility including making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with
this BSR . E081803
20 to 33 Amp
10
17400
1740
36 to 60 Amp E081805
4
10512
2628
66 to 110 Amp
4
13672
3418
Providing & Fixing of push button actuators and integral contact block of dia. 22.5 mm including making connection etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters
of products/ work , refer Annexure "A" attached with this BSR .
Luminous type Red , Yellow, Green, Amber
18
2988
166
Luminous type Blue , white
18
5166
287
Providing & Fixing of removable Voltage surge protection device (surge arrester) IEC 61643-11 type -2 for protection against transient over voltage (8/20 micro -seconds) and to run current waves to ground, making connection, testing etc. as required. ( Imax=40 kA, Up= 1.2kV, Uc=275 volts ) All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached
with this BSR .
Triple pole & neutral
1
7228
7228
Providing, Laying and Fixing following Dia RCC Pipe NP 2 Class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 ( 1 Cement : 2 fine sand)including trenching ( 75 cm) deep and refilling etc. as required.
250mm dia D.S.R. 2022 (Electrical) Item No. 14.14.3
25
19247
769.9
Making of following size of Cable Chamber made of 230 mm thick brick work in cement mortar (1 cement : 6 sand) with PCC 100 mm thick PCC base plastering of inner and outer surface with cement mortar including providing of Heavy Duty C.I Cover complete with digging, refilling and removal of surplus soil complete as required.
900 mm x 900 mm x 1000 mm deep N.S
4
27048
6762
Supplying and Fixing of Fire buckets, round bottom made of G.I. Sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.
PWD SOR Electrical 2018 Item No. 1133
8
3920
490
Supplying & Laying of 1800 mm x 900 mm X 12 mm thick chequered rubber matting of tested quality
PWD SOR Electrical 2018 Item No. 1136
4
10200
2550
Supply and fixing danger board fabricated from 10 gauge MS sheet as per IE Rules
PWD SOR Electrical 2018 Item No. 1109
4
340
85
S/F of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T & P for proper completion of work.
PWD SOR Electrical 2018 Item No. 1134
4
1220
305
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
Group C
Make:Schneider/Northwest D.S.R. Item No. 1.10.3 (Electrical 2022)
2556
2960895
1158.41
Wiring for circuit/sub-main wiring along with earth wire with the following size of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
Make:Schneider/Northwest 2X1.5 sqmm + 1x1.5 sqmm earth wire
D.S.R. Item No. 1.14.1 (Electrical 2022)
4800
883152
183.99
2X2.5 sqmm + 1x 2.5 sqmm earth wire
Make:Schneider/Northwest D.S.R. Item No. 1.14.2 (Electrical 2022)
680
147662
217.15
2X6.0 sqmm + 1x 6.0 sqmm earth wire
Make:Schneider/Northwest D.S.R. Item No. 1.14.4 (Electrical 2022)
250
86662
346.65
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
Make:Schneider/Northwest D.S.R. Item No. 1.14.5 (Electrical 2022)
200
90020
450.1
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
Make:Schneider/Northwest D.S.R. Item No. 1.14.11 (Electrical 2022)
100
107787
1077.87
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 25mm
Make:Schneider/Northwest D.S.R. Item No. 1.21.2 (Electrical 2022)
1200
121284
101.07
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 40mm
Make:Schneider/Northwest D.S.R. Item No. 1.21.4 (Electrical 2022
550
99022
180.04
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including
connections but excluding modular plate etc. as required : 16 amp switch
Make:Schneider/Northwest D.S.R. Item No. 1.24.3 (Electrical 2022)
66
9589
145.29
6 pin 16amp socket outlet
Make:Schneider/Northwest D.S.R. Item No. 1.24.5 (Electrical 2022)
66
10266
155.56
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box
including connections but excluding modular plate etc. as required.
Make:Schneider/Northwest D.S.R. Item No. 1.25 (Electrical 2022)
8
2331
291.38
Supplying and fixing following size / modules, GI box alongwith modular base & cover plate for modular switches
in recess etc as required 2 Module (75x75MM)
Make:Schneider/Northwest D.S.R. Item No. 1.27.1 (Electrical 2022)
24
5647
235.31
3 Module (100X 75MM)
Make:Schneider/Northwest D.S.R. Item No. 1.27.2 (Electrical 2022)
66
17041
258.21
6 Module (200X75MM)
Make:Schneider/Northwest D.S.R. Item No. 1.27.4 (Electrical 2022)
12
3809
317.44
Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required. 2 Module
Make:Schneider/Northwest D.S.R. Item No. 1.28.1 (Electrical 2022)
24
2520
105.02
3 Module
Make:Schneider/Northwest D.S.R. Item No. 1.28.2 (Electrical 2022)
66
7869
119.24
6 Module
Make:Schneider/Northwest D.S.R. Item No. 1.28.4 (Electrical 2022)
12
1724
143.72
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch. connections etc. as
required.
Make:Schneider/Northwest D.S.R. Item No. 1.32 (Electrical 2022)
66
30540
462.73
Supplying & drawing of UTP 4 pair cat-6 lan cable in the existing conduitas required. 1 Run of cable
Make:Schneider/Northwest D.S.R. Item No. 1.53.1 (Electrical 2022)
1860
83718
45.01
Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead
lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts. washers etc. as reauired.
Make:Schneider/Northwest D.S.R. Item No. 13.13 (Electrical 2022)
2
4150
2075.19
Supplying, installation, testing and comm1ss1onmg of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System} and shall be complete with all accessories .
The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per
specifications.
Make:Schneider/Northwest D.S.R. Item No. 17.2.1.1 (Electrical 2022)
1
359710
359710.39
Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally
monitor and operate the fire alarm system complete as required.
Make:Schneider/Northwest D.S.R. Item No. 17.2.2 (Electrical 2022)
1
158411
158411.58
Supplying, installation, testing & commissioning of repeater panel
wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
Make:Schneider/Northwest D.S.R. Item No. 17.2.3 (Electrical 2022)
1
85825
85825
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector
complete with mounting base complete as required.
D.S.R. Item No. 17.2.4 (Electrical 2022)
350
789883
2256.81
Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder
complete as required.
D.S.R. Item No. 17.2.6 (Electrical 2022)
16
33493
2093.35
Supplying, installation, testing & commissioning of addressable fire control module complete as required.
D.S.R. Item No. 17.2.10 (Electrical 2022)
16
37940
2371.31
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
D.S.R. Item No. 17.2.14 (Electrical 2022)
16
48907
3056.72
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
D.S.R. Item No. 17.2.15 (Electrical 2022)
16
44296
2768.5
Supplying, installation, testing & commissioning of 6 zone, voice
alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.
Make:Bose/D&B Audiotechnik
D.S.R. Item No. 17.3.1 (Electrical 2022)
1
99819
99819.88
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
Make:Bose/D&B AudiotechnikD.S.R. Item No. 17.3.2 (Electrical 2022)
140
106681
762.01
Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt
AC supply complete as reQuired.
Make:Bose/D&B Audiotechnik D.S.R. Item No. 17.3.6 (Electrical 2022)
1
76421
76421.11
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly
complete as required.
Make:Bose/D&B Audiotechnik
D.S.R. Item No. 17.3.9 (Electrical 2022)
1
64558
64558.26
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
Make:Schneider/Northwest D.S.R. Item No. 17.5.2 (Electrical 2022)
2500
341525
136.61
Supplying and drawing of cable Fire Retardant PVC insulated
copper conductor cable in the existing surface I recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Two pair, 2-core, 1.5 sqmm
Make:Schneider/Northwest D.S.R. Item No. 17.5.3.2 (Electrical 2022)
1350
94878
70.28
Supply, Installation, Testing and Commissioning of Wall mounted ISO 9001:2015 & 14001 or higher level certified company made Communication enclosure (Rack) of Minimum 500 MM Depth with made from CRCA & hot dip powder coated, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with 'U'Marking, with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19" angles with wall mounting provision on wall. Accessories like: 1 No of 19" 1U Horizontal Cable manager, 2 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19" 1U, mountable socket strips with 6 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with fastner of suitable capcity etc as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
Market Rate
6 U wall mounted Enclosure
2
13382
6691
Supply , Installation, Testing and Comissioning of Unmanaged Switch Plug-and-play - easy setup with no configuration or no software needed, following Port fast ethernet - 8 10/100/1000 MBPS gigabit auto-negotiation RJ45 ports, IEEE 802.3x flow control ,supports auto-MDI/MDIX, eliminating the need for crossover cables including making connection etc as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .8 Port
Make : Siemon/Derwiser
18
28260
1570
24 Port
Make : Siemon/Derwiser
8
37144
4643
Supply, installation, testing and commissioning of Monitoring software video surveillance all channels real-time live monitoring simultaneously The VMS shall support client applications including System client, Web client, Video wall management client and mobile client, The VMS shall support login by user name and password. It shall also manage all user information, permissions, license, operation information and system information, The VMS shall support unified time synchronization among all devices in the system and daily user and maintenance information management, The video recording management shall support several types of storage device such as DAS, NAS, IPSAN, direct storage etc. It shall enable centrally management of NVR, storage devices offering video searching, playback, managing and downloading, The video recording management shall support several types of storage device such as DAS, NAS, IPSAN, direct storage etc. It shall enable centrally management of NVR, storage devices offering video searching,
playback, managing and downloading, Shall have Network management server which regularly acquires the status of video devices such as NVR, Network camera, storage boxes and running status of servers of system, Shall have Network management server which regularly acquires the status of video devices such as NVR, Network camera, storage boxes and running status of servers of system, Shall have an Alarm management server which provides alarm events and maintains the logs of alarm management. It shall also receive I/O alarms triggered by alarm host such as recorder, camera and so on. IT shall also be responsible to trigger linked actions like push alarm notification to clients, sending e mail, calling presents in PTZ, video wall linkages etc., Shall have an Alarm management server which provides alarm events and maintains the logs of alarm management. It shall also receive I/O alarms triggered by alarm host such as recorder, camera and so on. IT shall also be responsible to trigger linked actions like push alarm notification to clients, sending e mail, calling presents in PTZ, video wall linkages etc. Make : Siemon/Derwiser
D.S.R. Elctrical (2022) Item No. 47.3.1
1
9555
9555
32ch Network Video Recorder- Connect Up to 32 IP Cameras, Dual OS, Up to 8 Megapixels Resolution, HDMI and VGA independent outputs provided, HDMI Video output at up to 4K (3840 × 2160) resolution , VGA upto 1920 × 1080, Support H.265, MJPEG, Incoming Bandwidth 256 Mbps, 4 SATA Hard Disks, ANR Technology, 4 SATA interfaces for 4 HDDs and capacity of Nos HDD upto 6TB, 3× USB at least 1 × USB with 3.0, Alarm I/O 16/4, RS- 485, RS-232, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web
viewer, CE, FCC, BIS certified. Make : Siemon/Derwiser
4
147000
36750
Supply Installation, Testing & Commissioning of Intel i7 12th Generation processor 3Ghz or latest, 4GB RAM with 2TB hard disk, DVD-RW/keyboard/optical mouse/LAN card/24” LED monitor. Minimum 6 USB ports. With pre- loaded licensed Windows 10 or latest software PC Make: Dell/HP
2
139636
69818
SITC of 55'' 4k Resolution or Better LED TV with remote control and wall mount unit / floor stand complete with making connections etc. as required.
Make: Sony/Samsung
2
147000
73500
Supply, Installation, Testing & Commissioning of 5 MP IR Fixed Dome Network Camera -1/2.7 inch Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.8 mm Fixed lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, BLC, HLC, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, IK10, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Region entrance detection, Region exiting detection, Scene change detection, Face capture, Video tampering, audio exception detection, False alarm reduction through human and vehicle target classification based on deep learning CE, FCC, BIS certified
Make : Siemon/Derwiser
48
599760
12495
Supply, Installation, Testing & Commissioning of 5 MP IR Fixed Bullet Network Camera -1/2.7 inch Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.8 mm Fixed lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, BLC, HLC, Three individually configurable stream, 12 VDC & PoE,
IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, Alarm 1 inputs, 1 outputs, Audio 1 inputs, 1 outputs, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Region entrance detection, Region exiting detection, Scene change detection, Face capture, Video tampering, audio exception detection, False alarm reduction through human and vehicle target classification based on deep
learning CE, FCC, BIS certified
Make : Siemon/Derwiser
4
5156
1289
Supplying and installing following size of perforated Hot dipped galvanised iron cable tray with perforation not
more than 17.5% in convenient sections joined with connectors suspended from the ceiling with MS suspenders including bolts & nuts painting suspenders etc as required.
300MM width X 50 MM Depth X 1.6 MM thickness Make : Siemon/Derwiser
D.S.R. Electricals (2022) Item No. 4.6.4
1150
874494
760.43
450MM width X 50 MM Depth X 2.0 MM thickness
D.S.R. Electricals (2022) Item No. 4.6.6
200
209256
1046.28
Supplying and installing following size of perforated Hot dipped galvanised iron cable tray bends with perforation not more than 17.5% in convenient sections joined with connectors suspended from the ceiling with MS Make:Schneider/Northwest
suspenders including bolts & nuts painting suspenders etc as required.
300MM width X 50 MM Depth X 1.6 MM thickness
D.S.R. Electricals (2022) Item No. 4.7.4
60
87745
1462.42
450MM width X 50 MM Depth X 2.0 MM thickness Make:Schneider/Northwest
D.S.R. Electricals (2022) Item No. 4.7.6
24
50846
2118.62
Supplying and installing following size of perforated Hot dipped galvanised iron cable tray cross members with perforation not more than 17.5% in convenient sections joined with connectors suspended from the ceiling with MS suspenders including bolts & nuts painting suspenders etc as required.
300MM width X 50 MM Depth X 1.6 MM thickness Make:Schneider/Northwest
D.S.R. Electricals (2022) Item No. 4.9.4
20
37366
1868.3
450MM width X 50 MM Depth X 2.0 MM thickness Make:Schneider/Northwest
D.S.R. Electricals (2022) Item No. 4.9.6
10
28182
2818.24
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
Make:Schneider/Northwest
D.S.R. Electrical (2022) Item No. 1.44
8
1345
168.19
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
D.S.R. Electrical (2022) Item No. 1.50.1
2
710
355.34
Supply and fixing hexagonal/Round G.P. fan box of approved make made up of 1.0mm thick ISI Marked G.P. sheet spot weeldeed Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screewed fitted with 300mm round zink coted M.S Bar X 12mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.
D.S.R. Civil (2023) Item NO. 10.18
634
110468
174.24
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Make:Schneider/Northwest
D.S.R. Electrical (2022) Item No. 1.25
8
2331
291.38
Supply & fixing of LED Tube Light with Metal heavy dutyBox type batten Light fitting 1 x 22 watt suitable for up to 1 x 22 watt LED Polycarbonate tube light complete including tube etc suitable for both surface & surface complete in all respects.(CAT: AAA)
Make: Bajaj /Philips
PWD Electrical SOR 2018 Item No. 1414
202
361580
1790
Supply & fixing of recess/Surface mounting round 10 to 15 watt, cut out Min 125mm, Height Min 40mm, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set, suitable for 24Hr continuous Operation,complete in all respect.(CAT: AAA)
PWD Electrical SOR 2018 Item No.1402
1569
2118150
1350
Suuply and fixing of single LED light wall bracket on matching M.D.F.E.G board base etc. complete in all respect.(CAT: AAA)
Make: Bajaj /Philips
PWD Electrical SOR 2018 Item No. 412
35
57750
1650
Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.
Make: Bajaj /Philips
PWD Electrical SOR 2018 Item No. 1406
116
566080
4880
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required
Make: Bajaj /Hevells
D.S.R. Electrical 2023 Item No. 19.1
8
17245
2155.73
S & F surface/Flush mounting 8ways V TPN distribution board with additional metal board without MCB complete in all respect,as directed at site by Engineer in charge. Make: Schneider/Northwest
PWD Electrical SOR 2018 Item No. 1028 ©
10
110100
11010
S & F surface/Flush mounting 8ways V TPN distribution board with additional Door without DPX3 250 MCCB complete in all respect, as directed at site by Engineer in charge.
Make: Schneider/Northwest
PWD Electrical SOR 2018 Item No. 1030(K)
27
333855
12365
Supply fixing and making connection of following MCBS complete in all respects as per direction and satisfaction of engineer-in-charge.(CAT: A)
Make: Schneider/Northwest
PWD Electrical SOR 2018 Item No. 1020
10
22750
2275
S&F of 63 Amp. 4 pole MCB(10 KA) C Curve
Make: Schneider/Northwest
PWD Electrical SOR 2018 Item No.1020 A
10
22900
2290
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve
Make: Schneider/Northwest
PWD Electrical SOR 2018 Item No. 1002
890
231400
260
S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve
Make: Schneider/Northwest
PWD Electrical SOR 2018 Item No.1009
60
44400
740
Supply and fixing Single Pole MCBS Blanking Plate complete in all respects. (CAT: A)
Make: Schneider/Northwest
PWD Electrical SOR 2018 Item No.1034(b)
50
1250
25
Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.
Make: Schneider/Northwest
20 Pair N.S
380
97660
257
S/f of 20 pair Telephone Tag Block for Floors and building with Krone connectors , with connection and
Make: Schneider/Northwest punching of
same. N.S
34
149192
4388
Multifunction LCD meter with V, I, F, PF, KW, Kva, Kvar, Kwh, Kvah, Kvarh, Run hours, On hours, Phase angle, Interrupts, THD, Events, Neutral Current class 1 accuracy with RS485 port.
38
282302
7429
Fire Fighting
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 . (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.
2850 lpm at 70 m Head
DSR_AOR 2019 Item No. 1.2
2
719753
359876.79
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as
required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with
stainless steel shaft, mechanical seal conforming to IS 1520.Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.
2850 lpm at 70 m Head
DSR_AOR 2019 Item No. 2.2
1
549283
549283.93
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.
180 lpm at 70 m Head
DSR_AOR 2019 Item No. 3.2
2
182841
91420.54
CONTROL PANELS FOR MAIN PUMP Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3
phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :
Incomings
400A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500A. Outgoings ( Note : All outgoing feeders for pumps should
have digital Ammeter with selector switches,
and LED type ON, OFF, trip indicating lamps) DSR_AOR 2019 Item No. 5.2
1
257013
257013.39
PIPES & ACCESSORIES
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
25 mm dia
DSR_AOR 2019 Item No. 7.1
2470
1038733
420.54
32 mm dia
DSR_AOR 2019 Item No. 7.2
100
47054
470.54
40 mm dia
DSR_AOR 2019 Item No. 7.3
150
87187
581.25
50 mm dia
DSR_AOR 2019 Item No. 7.4
165
115942
702.68
65 mm dia
DSR_AOR 2019 Item No. 7.5
372
333471
896.43
80 mm dia
DSR_AOR 2019 Item No. 7.6
80
80143
1001.79
90 mm dia
Market Rate
40
40600
1015
100 mm dia
DSR_AOR 2019 Item No. 7.7
17
22752
1338.39
150 mm dia
DSR_AOR 2019 Item No. 7.8
458
844029
1842.86
200mm dia
DSR_AOR 2019 Item No. 7.9
20
52250
2612.5
225mm dia
Market Rate
15
42750
2850
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked
conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
Single headed Gunmetal
DSR_AOR 2019 Item No. 9.1
16
107057
6691.07
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required
Single headed Gunmetal
DSR_AOR 2019 Item No. 10.1
6
40146
6691.07
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
65 mm dia
DSR_AOR 2019 Item No. 11.3
2
7408
3704.46
100 mm dia
DSR_AOR 2019 Item No. 11.5
1
5762
5762.5
150 mm dia
DSR_AOR 2019 Item No. 11.6
13
100970
7766.96
200 mm dia
DSR_AOR 2019 Item No. 11.7
2
26710
13355.36
Supplying, fixing, testing and commissioning of ball valve 50mm dia
Market Rate
10
27648
2764.87
Supplying, fixing, testing and commissioning of ball valve 32mm dia
Market Rate
2
3374
1687.05
Supplying, fixing, testing and commissioning of ball valve 40mm dia
Market Rate
2
4912
2456.4
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
50mm dia
DSR_AOR 2019 Item No. 14.2
2
10082
5041.07
100mm dia
DSR_AOR 2019 Item No. 14.5
2
19350
9675
150mm dia
DSR_AOR 2019 Item No. 14.7
12
188325
15693.75
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
Market Rate
65mm dia
2
4865
2432.94
200mm dia
DSR_AOR 2019 Item No. 15.4
2
39378
19689.29
Supply, installing, testing and commissioning of siphon tube with valve & pressure gauge capable of measuring 0-10 kg/sq.cm pressure complete with fitting. siphone tube( M.S) and Brass valve 10 mm in dia & pressure gauge fiiled with Glycerin, dial size 3 inch. Market Rate
12
26496
2208
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
Stainless Steel (Grade 304)
DSR_AOR 2019 Item No. 16.2
44
174192
3958.93
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30m
DSR_AOR 2019 Item No. 17.1
16
120185
7511.61
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required
Gun metal
DSR_AOR 2019 Item No. 18.1
22
47182
2144.64
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
4 way-150 mm dia M.S. Pipe
DSR_AOR 2019 Item No. 19.2
1
12341
12341.07
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
DSR_AOR 2019 Item No. 20.
1
16079
16079.46
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
DSR_AOR 2019 Item No. 22
9
12117
1346.43
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
150mm dia
DSR_AOR 2019 Item No. 23.2
9
71268
7918.75
Co2 type Fire Extinguisher 4.5 Kgs. Capacity, made from brand new seamless cylinder, as per IS: 7285 and CCE approval, fitted with Discharge hose and horn and wheel type valve with initial Charge as per IS: 15683:2018 specification, bearing ISI Mark & EIL approved. Make: SAFEX PWD SOR Electrical 2018 Item No. 1132
89
1066220
11980
Co2 type Fire Extinguisher 6.5Kgs. Capacity, made from brand new seamless steel cylinder, as per IS: 7285 and CCE approval fitted with discharge, hose and horn with wheel type valve mounted on trolley wheels with initial charge as per IS: 16018 : 2012 specification, bearing ISI Mark & EIL approved. Make: PWD SOR Electrical 2018 Item No. 1132(A)
10
199000
19900
FIRE HOSE CABINET
Providing and fixing fire hose cabinet (floor/wall mounted) fabricated from 16 gauge MS sheet of fully welded construction with hinged double front door, locking arrangement, partially glazed with 4mm thick glass, spray painted in post office red & with wall/floor mounting brackets Size of Cabinet 900 x 600 x 350mm.(LxHxW) Market Rate
6
43818
7303
Providing and fixing fire hose cabinet (floor/wall mounted) fabricated from 16 gauge MS sheet of fully welded construction with hinged double front door, locking arrangement, partially glazed with 4mm thick glass, spray painted in post office red & with wall/floor mounting brackets Size of Cabinet 1200 x 600 x 2100mm.(LxHxW) Market Rate
16
136800
8550
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :
Pendent Sprinkler
DSR_AOR 2019 Item No. 21.1
750
363045
484.06
Horizontal side wall sprinkler
DSR_AOR 2019 Item No. 21.3
6
3048
508.07
FIRE DETECTION & ALARM SYSTEM
Supply, installing, testing and commissioning of heat detector operating at 54deg.c/57deg.c with rate of rise cum fixed temperature (dual thermister ) type with mounting base complete with all connections etc . As required.
DSR (E&M) 2022 Item No. 17.1.1
9
7611
845.71
Supply, installing, testing and commissioning of smoke detector with builtin led and mounting base complete with all connections etc . As required.
DSR (E&M) 2022 Item No. 17.1.2
240
218510
910.46
Supply, installing, testing and commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
DSR (E&M) 2022 Item No. 17.1.3
24
8982
374.29
Supplying, installation, testing & commissioning fire alarm sounder mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
DSR (E&M) 2022 Item No. 17.1.6
24
10555
439.83
Supplying, installation, testing & commissioning of addressable fire control module complete as required.
DSR (E&M) 2022 Item No. 17.2.10
1
2371
2371.31
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
DSR (E&M) 2022 Item No. 17.5.2
1945
265706
136.61
Supplying and fixing , fire service 4 way connection Market Rate
1
7475
7475
Supplying and fixing , fire brigade drawout connection
Market Rate
1
2300
2300
Providing & Fixing 3HP Sewage Submersible Pump for Sump, STPM32-17, Head: 3-17 m (Make: Crompton)
M.R.
2
39000
19500
Providing & Fixing SUMP Pump Panel with all complete. (Make:Crompton)
M.R.
1
4500
4500
Plumbing & Sanitary Works (G+2)
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.
Make : Jaquar
D.S.R. 17.5.1
4
36515
9128.97
Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern.
Make : Jaquar
D.S.R. 17.5.4
4
78555
19638.77
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require, White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
Make : Jaquar
D.S.R. 17.7.1
28
56087
2003.13
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
Make : Jaquar
D.S.R. 17.16A
20
5280
264.04
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Semi rigid pipe 40 mm dia Make : Jaquar
D.S.R. 17.28.1.2
28
2471
88.25
Providing and fixing 100 mm sand cast Iron grating for gully trap.
Make : Jaquar
D.S.R. 17.29
4
161
40.27
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Make : Jaquar
D.S.R. 17.31
24
29183
1215.97
Providing and fixing toilet paper holder :
C.P. brass
Make : Jaquar
D.S.R. 17.34.1
18
10940
607.78
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
100 mm inlet and 100 mm outlet
Sand cast iron S&S as per IS - 3989
Make : PRINCE/ASTRAL
D.S.R. 17.60.1.1
27
32752
1213.06
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :
50 mm dia
D.S.R. 17.61.3
185
47006
254.09
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge
Make : Jaquar
D.S.R. 17.81
12
165276
13773.06
C.P.V.C. PIPES
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge (Make: Finolex/Astral)
Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes D.S.R. Item no. 18.9.2
25
5185
207.43
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge
25 mm nominal outer dia Pipes, Make: Astral/Finolex
D.S.R. Item no. 18.9.3
50
13438
268.76
32 mm nominal outer dia Pipes, Make: Astral/Finolex
D.S.R. Item no. 18.9.4
50
16584
331.68
40 mm nominal outer dia Pipes, Make: Astral/Finolex
D.S.R. Item no. 18.9.5
50
21289
425.79
50 mm nominal outer dia Pipes, Make: Astral/Finolex
D.S.R. Item no. 18.9.6
60
35681
594.69
BRASS FITTINGS
Providing and fixing uplasticised PVC connection pipe with brass unions :
30 cm length 15 mm nominal bore, Make Astral/Finolx
D.S.R. 18.21.1.1
30
1928
64.28
45 cm length 15 mm nominal bore, Make Astral/Finolex
D.S.R. 18.21.2.1
30
2217
73.92
C.P. BRASS FITTINGS
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15 mm nominal bore, Make Jaquar
D.S.R. 18.49.1
18
6898
383.26
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
15 mm nominal bore, Make Jaquar
D.S.R. 18.50.1
10
6206
620.63
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
15 mm nominal bore, Make Jaquar
D.S.R. 18.52.1
21
10647
507.01
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15 mm nominal bore, Make Jaquar
D.S.R. 18.53.1
60
26058
434.3
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
15 mm nominal bore, Make Jaquar
D.S.R. 18.53A
20
1131
56.57
Cutting holes up to 30x30 cm in walls including making good the same:
With common burnt clay F.P.S. (non modular) bricks
D.S.R. 18.76.1
10
3151
315.19
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
D.S.R. 18.77
10
3418
341.81
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
D.S.R. 18.78
10
1534
153.44
DRAINAGE (For External Drainage Works)
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
D.S.R. 18.33.1
2
16428
8214.43
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
D.S.R. 19.4.3.1
2
4238
2119.06
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) finished with a floating
coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
D.S.R. 19.7.1.1
10
96574
9657.42
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 D.S.R. 19.7.3.1
5
124239
24847.95
Extra for depth for manholes :
Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
D.S.R. 19.8.1.1
3
20021
6673.99
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Size 120x90 cm
D.S.R. 19.8.2.1
3
24015
8005.03
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
With 20x20 mm square bar
D.S.R. 19.15.1
50
20596
411.92
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg
D.S.R. 19.20
4
2380
595.15
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
For pipes 100 to 250 mm diameter
D.S.R. Item No. 19.21.1
2
1225
612.88
Internal work - Exposed on wall
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Make: Finolex/Astral)
40 mm nominal outer dia Pipe
D.S.R. 2023 Item No. 18.7.5
10
6027
602.74
50 mm nominal outer dia Pipes (Make: Finolex/Astral)
D.S.R. 2023 Item No. 18.7.6
15
12428
828.56
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge
65 mm nominal inner dia Pipes (Make: Finolex/Astral)
D.S.R. 2023 Item No. 18.9.7
100
149659
1496.59
Providing and fixing gun metal gate valve with C.I. wheel of approved
quality (screwed end) :Providing and fixing gun metal gate valve with C.I. wheel of approved
quality (screwed end) : (Make: Finolex/Astral)
40 mm nominal bore
D.S.R. 2023 Item No. 18.17.3
4
2528
632.19
50 mm nominal bore (Make: Finolex/Astral)
D.S.R. 2023 Item No. 18.17.4
4
3139
784.98
65 mm nominal bore (Make: Finolex/Astral)
D.S.R. 2023 Item No. 18.17.5
4
5329
1332.4
Non DSR ITEMS
Supplying,commissioning of SS vertical multistage centrifugal pump. Nos pump shall have TEFC 2900 RPM three phase electric motor. The pump shall have cast iron head, base plate SS Shaft/ Impeller/ Intermediate chamber. Pump shall be provided with mechanical seal. The pump shall be suitable for auto/ manual operation.
Make : Kirloskar/Crompton
Filter feed pumps
Flow rate : 7.5 M³/Hr.
Head : 35 Mtr.
Qty : 2 Nos. (1W+1S)
Market RAte
1
230000
230000
Transfer pumps Make : Kirloskar/Crompton
Flow rate : 5 M³/Hr.
Head : 35 Mtr.
Qty : 2 Nos. (1W+1S)
1
230000
230000
HVAC DUCTING SYSTEM
MECHANICAL VENTILATION UNITS - TOILETS Supply, Installation, testing and commissioning circular direct driven / cabinet inline fans of G.I. construction complete with centrifugal fan with motor, accoustically lined, canvass connection at inlet and outlet complete with electric panel with MCB and relays, with 5 Rm cabling and earthing complete as per standards, requirement and drawings. Make: Daikin/Mitsubishi Electric/Panasonic
450 CFM for Toilet 15 mmwg S.P(As per MR-4) (Rate=15743/1.18)
7
93390
13341.53
250 CFM for Toilet 15 mmwg S.P(As per MR-4) (Rate=13102/1.18) Make: Daikin/Mitsubishi Electric/Panasonic
7
77723
11103.39
MECHANICAL EXHAUST FAN UNITS - For Parking area (Basement floor )
Supply, installation. Testing and commissioning of AXIAL FLOW FAN type 35 mm of wg static complete with GI housing, Blower, motor and fixing arrangements etc... As given below capacity(Exhaust Stand by 1 noramal & 1 in case of fire) Make: Daikin/Mitsubishi Electric/Panasonic
20500 CFM for Parking
6
930000
155000
Drain Piping
Supplying & fixing of UPVC drain piping with all fitting such as bends, tees etc. necessary clamps, adequate support duly insulate with 9 mm nitrile rubber insulation complete as per technical specifications, requirement, standardard and drawings complete as required.
50 mm dia(As per MR-3) (Rate=298/1.18)
200
50508
252.54
40 mm dia(As per MR-3) (Rate=204/1.18)
450
77796
172.88
32 mm dia(As per MR-3) (Rate=157/1.18)
600
79830
133.05
25 mm dia (As per MR-3) (Rate=121/1.18)
350
35889
102.54
Supply ,installation,balancing & commissioning of Fabricated at site GSS sheet metal regtanular /round ducting complete with neoprene rubber gaskets, elbows splitter dampers,vanes,hangers, supports etc. as per approved drawing and specifications of following sheet thikness complete as required. Thikness 0.63 mm sheet (24 gauge)
D.S.R. 16.12.2.1
2400
2005056
835.44
Thikness 0.80 mm sheet (22 gauge)
D.S.R. 16.12.2.2
400
388188
970.47
thikness 1.00 mm sheet (20 gauge)
D.S.R. 16.12.2.3
10
14158
1415.83
Duct Acoustic Lining
Supply and fixing of acoustic lining of supply air duct and plenum with 25mm thick resin bonded glass wool having density of 32 kg/m3, with 25mm x 25mm GI seciton of 1.25 mm thick, at 600 mm centre to centre coverd with Reinforced plastic tissue paper and 0.5 mm thick perforated aluminim sheet fixed to inside surface of ducts with cadmium plated nuts,bolts, stick pins, CPRX compund etc. complete as required and as per specifications. D.S.R. 16.21
225
125790
559.07
Duct Insulation
Supply and fixing of Following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class 'O') Insulation on existing duct after applying suitable adhesive for nitrile rubber .the joints shall be sealed with 50 mm width and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. above valves should have pressure rating of 25 bar minimum.
19 mm D.S.R. 16.23.1
1275
759122
595.39
S/R Grilles /Diffuser's /Damper's
Supplying & fixing of powder coated extruded aluminium
Supply Air Grills with aluminium volume control dampers as per
specifications.
D.S.R. 16.15
50
359486
7189.72
Supplying & fixing of powder coated extruded aluminium
Return Air Grills with louvers but without volume control
dampers complete as required.
D.S.R. 16.16
60
280008
4666.81
Supply and Installation testing and commissioning of GI volume control DUCT damper complete with neoprene rubber gaskets,nuts, bolts, screws linkages ,flanges etc ,as per specification.
D.S.R. 16.13
30
166915
5563.84
Supplying, fixing testing commissioning of supply air diffusers of
powder coated aluminium with aluminium volume control
dampers with anti smudge ring & removable core.
D.S.R. 16.17
16
153936
9621.04
Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.
D.S.R. 16.18
16
102603
6412.71
Supplying, fixing testing and commissioning of fire dampers in supply air duct/ main branch and return air path as and where required size i/c contorl wiring , Fire damper D.S.R. 16.20.1
8
67334
8416.83
Copper Refrigerant Piping
Supply, Installation, Testing & Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with with Class-O closed cell elastometric nitrile rubber insulation of specified thickness as given below for Suction and Liquid lines, exposed piping shall be protected with UV & water protective coating, all accessories as per specifications etc. as required:
6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.1)
120
29400
245
9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.2)
395
130745
331
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.3)
290
135140
466
15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.4)
275
161700
588
19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.5)
350
247450
707
22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.6)
150
129750
865
28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.8)
120
132960
1108
34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.10)
65
79950
1230
41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
(As per DSR_VRF/VRV _2019_5.12)
180
235620
1309
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements