Bareilly Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Bareilly Development Authority - BDA Tender
Transportation and Logistics
Eprocure
Opening Date3 Apr 2023
Closing Date9 Jun 2023
Tender Amount₹ 6,18,89,595
Costs
EMD
₹ 12,38,000Document Cost
₹ 20,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_BDAUP_792413_1Bid Award Id
ViewTender No
T-02/2023/01Tender Authority
Bareilly Development Authority ViewPurchaser Address
-Website
http://http://www.bdainfo.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
from depth 3.00m TO 4.5m251+254*2
88.86
20437
230
... More
Earth work in filling in ordinary soil incl. cartagefrom 4 km distance and cutting of earth also incl cost of earthpwd 253+cartage+cost of earth
1808.16
634121
350.7
... More
Cement concrete with 4 cm gauge approved stone ballast, approved coarse sand and cement in the proportion of 8:4:1 incl suplly of all materials , albour and t& p etc required for proper completion of the work.pwd 281
189.59
1274044
6720
... More
Cement concrete with 2 cm gauge approved stone ballast, coarse sand and cement in the proportion of 1:2:4 including supply of all materials , labour and t& p etc requieec for propoer completion of the workpwd 279 (i)
5.24
38776
7400
... More
First class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of work.pwd 303
205.78
1043304
5070
... More
First class brick work in 1:4 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and including honey comb brick work but for one brick thick add for extra labour over item no. 309 including supply of all materials, labour and T & P etc. required for proper completion of work.Ground Floorpwd 305+309+310
297.52
1782144
5990
... More
First Floorpwd 305+309+310
175.75
1063269
6049.9
... More
Terrace Floorpwd 305+309+310
37.3
227895
6109.8
... More
First clas brick work in 1:4 cement and coarse sand mortar super structure including cutting and moulding of bricks as required and including honey comb brick work for 11.5 cm (4.5") thick brick workadd for extra over item no. 309 Ground Floorpwd 305+309+310A
42.51
262286
6170
... More
First Floorpwd 305+309+310A
49
305353
6231.7
... More
S&F Mild steel or iron in plain work such as reinforced concrete and reinf. b/work (when not incld in overall rate) wrougth to requ. Shape as necess. Incl bending for proper comp of work and incl suypply of all steel and wastage and ooverlapping and hookground floor and below ground levelpwd 504
1082.48
9601597
8870
... More
First Floor pwd 504
379.76
3402155
8958.7
... More
Terrace Floorpwd 504
27.82
251698
9047.4
... More
R.C.C. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:2 : 4 (1 cement : 2 C. sand : 4 stone aggregate) in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 B WG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works strength of the concrete shall not beless than M-20.but in R.C.C Column Footing 1 : 1.5 : 3 P.W.D. SOR Item No. 287+diff
311.24
2524156
8110
... More
As in item 21 above but in R.C.C Column 1 : 1.5 : 3
P.W.D. SOR Item No. 289 Ground Floor
109.18
923662
8460
... More
As in item 21 above but in R.C.C Tie Beam 1 : 1.5 : 3 (Ground Floor)
P.W.D. SOR Item No. 288
In Tie Beam
12.34
99028
8025
... More
As in item 21 above but in R.C.C Plinth Beam 1 : 1.5 : 3 (Ground Floor)
P.W.D. SOR Item No. 285+diff
62.55
556069
8890
... More
As in item 21 above but in R.C.C Lintel Beam 1 : 1.5 : 3 (Ground Floor)
P.W.D. SOR Item No. 285
10.34
91922
8890
... More
As in item 6 above but in R.C.C Beam 1 : 1.5 : 3 (Ground Floor)
P.W.D. SOR Item No. 285+diff
64.2
570738
8890
... More
As in item 6 above but in R.C.C. Slab in 1:1.5:3 P.W.D. SOR Item No. 284a
In Slab (Ground Floor)
185.53
1562162
8420
... More
As in item 21 above but in R.C.C Column 1 : 1.5 : 3
P.W.D. SOR Item No. 289 First Floor
29.18
249331
8544.6
... More
As in item 21 above but in R.C.C Lintel Beam 1 : 1.5 : 3 (First Floor)
P.W.D. SOR Item No. 285+diff
11.74
105412
8978.9
... More
As in item 6 above but in R.C.C Beam 1 : 1.5 : 3 (First Floor)
P.W.D. SOR Item No. 285+diff
62.07
557320
8978.9
... More
As in item 6 above but in R.C.C. Slab in 1:1.5:3 P.W.D. SOR Item No. 284A
In Slab (First Floor)
158.7
1349616
8504.2
... More
As in item 21 above but in R.C.C Column 1 : 1.5 : 3
P.W.D. SOR Item No. 289 Terrace Floor
6.2
53501
8629.2
... More
As in item 21 above but in R.C.C Lintel Beam 1 : 1.5 : 3 (Terrace Floor)
P.W.D. SOR Item No. 285+diff
0.58
5259
9067.8
... More
As in item 21 above but in R.C.C Beam 1 : 1.5 : 3 (Terrace Floor)
P.W.D. SOR Item No.285+diff
3.62
32825
9067.8
... More
As in item 21 above but in R.C.C. Slab in 1:1.5:3 P.W.D. SOR Item No. 284A
In Slab (Terrace Floor)
6.69
57456
8588.4
... More
12 mm thk plaster with 1:4 cement and coarse sand over new brick work rough or fair side of wall incl suppply of all materials labour and t & p etc required for proper completioin of work (internal plaster)
ground floor
pwd 584+Rs 26
2509.03
504315
201
... More
1st floor (internal plaster)
pwd 584+Rs 26
1986.22
403222
203.01
... More
terrace floor (internal plaster)
pwd 584+Rs 26
53.67
11003
205.02
... More
Same as item no-13 but extra for External Surface plaster in proportion of 1:4 (cement coarse sand) Ground Floor Pwd 584+596+Rs.26
1344.19
293033
218
... More
Same as item no-13 but extra for External Surface plaster in proportion of 1:4 (cement coarse sand) First Floor Pwd 584+596+Rs.26
967.28
212975
220.18
... More
Same as item no-13 but extra for External Surface plaster in proportion of 1:4 (cement coarse sand) Terrace Floor
Pwd 584+596+Rs.26
341.8
76002
222.36
... More
SMOOTH Finishing of the exposed surface of rcc work with 6mm cement mortar 1:3 cement and fine sand dsr 5.23(Rendring)
427.66
96625
225.94
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. dsr 13.80
7310.38
808381
110.58
... More
Finishing walls with textured exterior paint to required shade new work (Two or more coats applied @ 3.28lit/10 sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm(make:Asian/Berger/Dulux)DSR 13.45.1
427.66
93550
218.75
... More
Finishing of wall with acrylic exterior shade new work (two or more coats applied @ 1.67 lt/10 sqm over and including base coat of water proofing cement applied @ 2.20 kg/10 sq m) (interior+exterior)
(make:Asian/Berger/Dulux)
ground floor
sor 13.46.1/36
1804.19
169593
94
... More
first floor
sor 13.46.1/36
967.28
91833
94.94
... More
terrace floor
sor 13.46.1/36
341.8
32771
95.88
... More
applying priming coat over new wood work+painting first coat over priming coat (but excl. cost of priming coat) on wood +second coat of superior quality(make:Asian/Berger/Dulux)ground floorpwd new item 1b+2+3(iii)
169.2
13536
80
... More
first floorpwd new item 1b+2+3(iii)
155.76
12585
80.8
... More
Terrace floorpwd new item 1b+2+3(iii)
4.4
359
81.6
... More
distemper two coat with oil bound distemper of approved brand manufacture and required shade on decorated wall surfaces to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as british, shalimar, asian paints after thoroughly brushing surface free from mortar dropping and other foreign matter and also sand prepered smooth including cost of all materials.ground floor(make:Asian/Berger/Dulux)pwd 649+650
1943.76
202151
104
... More
1st floorpwd 649+650
1686.23
177121
105.04
... More
terrace floorpwd 649+650
53.67
5693
106.08
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).ground floorSOR 9.1.2/9
3.63
303504
83610
... More
first floorSOR 9.1.2/9
3.41
287961
84446.1
... More
terrace floorSOR 9.1.2/9
0.06
5116
85282.2
... More
Providing and fixing flush doors 32 mm thick shutters ground floorpwd 470 (i)
80.64
114912
1425
... More
first floorpwd 470 (i)
80.64
116061
1439.25
... More
Terrace floorpwd 470 (i)
2.42
3517
1453.5
... More
Providing and fixing factory made uPVC white colour casement/ Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panesand silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerancein dimension i.e. in depth & width of profile shall be acceptable.(Make : Fenesta/ Aluplast)Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm).D.S.R. Item No. 9.147A.5
245.65
2357122
9595.45
... More
Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) (Make : Fenesta/ Aluplast)DSR 9.147B.1
14.4
93213
6473.13
... More
6 mm thick clear heat strengthened glass(Make : as provided by Fenesta/ Aluplast)DSR 2618
245.65
146950
598.21
... More
Float glass panes of nominal thickness 8 mm (weight not less than 20.00 kg/sqm)(Make : as provided by Fenesta/ Aluplast)DSR 2408
14.4
8074
560.71
... More
Weather Silicon sealant
(Make : as provided by Fenesta/ Aluplast)
DSR 8646
180
18000
100
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Make : Kajaria/ Simpolo/Johnson)DSR 8.31
497.6
472476
949.51
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels plain white marble/ udaipiur green marble / zebra balck marble area of slab over 0.50 sqmGround Floorsor 8.2.1.2
56.78
110721
1950
... More
First Floorsor 8.2.1.2
56.78
111828
1969.5
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. dsr 8.5
37
26697
721.56
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite workdsr 8.3.2
421
157441
373.97
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. (page no 17)(Make : Kajaria/ Simpolo/Johnson)ground floorsor 11.41.2/ 17
636.64
754418
1185
... More
1st floorsor 11.41.2/ 17
662.63
793068
1196.85
... More
Antiskid tiles Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The
tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size
600 x 600 mm (Make : Kajaria/ Simpolo/Johnson)
DSR 11.41A.3.1
140.96
165004
1170.58
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
Flamed finish granite stone slab Jet Black, Cherry Red, Elite
Brown, Cat Eye or equivalent. DSR 11.55.1
241.79
559117
2312.41
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm Nos having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board ground floor
sor 12.45.3
42.22
39264
930
... More
first floor
sor 12.45.3
57.44
53953
939.3
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
dsr 10.28
525.19
287095
546.65
... More
mild steel or iron work in small size and section such as folding down bolts hold fasts tie rods gratings etc but of fabrication of door and window frames, window & ventilator grill and staircase railing incl cost of hinges (when not incl in overall rates) wrought to teeq formincl supply of steel bolts nuts and wastage etc. and its fixing required for proper completion of work
ground floor
pwd 502
5.83
53023
9095
... More
1st floor
pwd 502
17.09
156987
9185.95
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
DSR 9.76
54
34897
646.25
... More
Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.
DSR 9.77
70
37712
538.75
... More
Returning filling in soft/loose soil including spreading leveling watering and wall ramming in layers n/exc 25 cm thick all as spd and directed
pwd 253a
1243.1
180249
145
... More
ATT_Treating the top surface of field earth at the rate of 5 litres of emlusion per sqm of surface area new item-1, chapter-8
(5 years guarantee bond to be provided by contractor)
2410.88
325468
135
... More
Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).
DSR 14.86
823.96
452444
549.11
... More
P/L of Brick Coba average 12 cm thick laid with M 150 class brick bat coba 7.50 cm thick with gap of 15 mm to Nos other, over 20 mm thick bace of cement morter 1:4 cement and coarse sand mixed with water proofing compound spreading cement siurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1 ; 4 cement and coarse sand mortar finished smooth top mashed faise square 30 cm X 30 cm & side wall parapet shall be monotythic plaster wall upto 30 cm higher & juction & corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished with acitic water proofing compound@ 2 % by weight& including supply of all materials,labours and T&P etc complete for proper completion of the work . rates for 3rd level
( PWD New Item no. 1 )
833.68
1038765
1246
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase D.S.R No 12.21.1
319.05
74121
232.32
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. D.S.R.No.12.22.1
18
4284
238.04
... More
making core cutting in rcc beam or slab with mechanichal driller machine incl cost of diamond edged core cutter incl hire charegs of machine and grouting of holes after pipe fitting
150 dia in slab upto 15 cm (MR)
28
42000
1500
... More
150 dia in beam upto 30 cm (MR)
28
28000
1000
... More
100 dia in slab upto 15 cm (MR)
40
32000
800
... More
100 dia in beam upto 30 cm (MR)
40
24000
600
... More
75 dia in slab upto 15 cm (MR)
40
24000
600
... More
75 dia in beam upto 30 cm (MR)
44
17600
400
... More
Sand filling in plinth incl supply of necessary qty of sand from a distance not exceeding 8 km fro the site of work & incl watering, dressing etc. Rate includes costof all materials, labour and T&P etc. required for proper completion of work (incl royalty)
pwd 255
454.67
345549
760
... More
Pointing Brick Work in (1:2) P.W.D. SOR Item No. 574
228
51984
228
... More
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. Analysis
110.07
389757
3541
... More
Laying C.C. Road slab 10 cm. 4" thick consisting 1:2:4 cement coarse sand and approved 2 cm. (3/4") gauge stone grit over prepared sub-grade after its rectifications & bringing it to proper camber & including supply of all materials, labour and T&P etc. required for proper completion of work, finished to temp, as directed by 'Engineer-in-charge but excluding cost of metal required for rectification of the sub-grade. P.W.D. 773
121.61
1138269
9360
... More
Providing and laying of 80 mm thick Interlocking cement concrete tiles (300mpa) including laveling and dressing of surface to required level and slope, filling joints with local sand including the cost of material,labour T&P etc.required for proper completion of work as directed by Engineer-in-Charge.P.W.D. New Item 1 (Road Work)
131.54
113124
860
... More
Supply and fixing of M.S Doors with 1mm thick m.s sheet & using M.S. angle 40x40x6 mm for diagonal bracing including supply of all materials, labour & T&P etc. required for proper completion of the work. PWD 517(a)
1.5
5992
3995
... More
Mild Steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. (when not including in an over all rates ) wrought to required from including suplly of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.
PWD502b
Angle iron chaukhat
0.17
1530
9000
... More
Cement concrete flooring 1:2:4 (1cement :2 coarse sand:4 graded stone aggregate 20mm nominal sizelaid in onelayey neat cement (25 mmthich floor)
PWD 601(a)
108.1
31781
294
... More
Supply of glass strips 22 mm wide 3.15 mm thick
PWD 631 a
377.96
12850
34
... More
12mm cement plaster 1:3 (1 cement 3 coarse sand) finished with a floating cost of neat cement DSR 13.7.1
223.51
48725
218
... More
EXTERNAL ELECTRICAL WORKS
SCHEDULE ITEMS (AS PER PWD SCHE. 2018/DSR 2018)
NON - SCHEDULED ITEMS (AS PER MARKET RATES )
SUB-HEAD-I (SUBSTATION EQUIPMENTS)
TRANSFORMER
100KVA 11KV/433V Dyn11 Copper Wound Oil Type Transformer with OCTC +5% to -10% in steps of 2.5% , Class of Insulation: A, Temperature rise limits of 40 deg.C over ambient of 50 degrees. Losses (As per IS tolerances) No load losses -2.7kW, Full load losses - 7.7kW and all accessories and confirming to As per IS 1180 Level 2 & Testing parameter as per IS 2026 complete with all fittings and accessories as per specifications attached etc as required at site.
N.S.
1
456399
456399
... More
H.T. VCB (11KV) Design, manufacturing, testing at works, supply of HT Panel as per specification and comprising of the following :-
a. INCOMER
630 A Vacuum circuit breaker of 26.3 KA ruputuring capacity at 11 KV rated, totally enclosed,air insulated metal clad housing, floor mounting, vertical isolation,vermin proof,fully interlocked horizontal drawout type having double isolation.
Manually and motor operated, spring charged( release closing mechanism) trip free type,triple pole truck mounted draw out, vacuum circuit breaker, incorporating mechanical as well as electrical ON/OFF indication. Spring charge/discharge mechanical indicator.
630 amp air insulated but encapsulated,PVC insulated Copper bus bars.
C.T. chamber with C.T.'s 40/5.
15 VA burden for protection (class 5P 10).
Following protection shall be provided:
1 Nos IDMT relay with instantaneous 2 nos. over currrent (50, 50 N) element and 1 no. instantaneous earth fault element(50-50N).(O/C setting 50%-200% and E/F setting 20%-80%)
All wiring necessary for the above including inter-connections. The size of the conductor should not be less than 2.5 sq. mm. Copper wire where required. Test terminal block, fuses/2A SPMCB , circuit labels,set of phase, indication lamps etc. as per standard practise as under.
Red - Breaker close (ON)
Green - Breaker open (OFF)
Amber - auto trip
Clear - trip circuit healthy
white - 3 nos. one per phase
Control :- T-N-C (Trip, Neutral. Close) breaker control switch with indication arrangement.
Blue spring charged
Terminal boxes with single gland trifucating cable box suitable for 11 KV Aluminium XLPE (E) cable of size 3C x 150 Sq. mm. for incoming/outgoing breaker.
HT Danger Plate.(as per IS specification)
2 Runs of 40 X 5 mm earth bus shall be provided for the full length of the panel.
Power Pack, Battery power pack shall be rated for minimum five (5) trippings. For DC power one no. source selector switch to be incorporated i.e. one source from power pack and other from outside.
Necessary D.C. supply healthy indication lamp (White Colour), switch with alarm.
Surge supressor as required.
DC Voltmeter, 0-30 Volt, Digital type.
HT Panel switchboard complete with all interconnections, labels, wiring etc, complete as described above in item nos.A and B and as per specifications.
N.S.
1
495374
495374
... More
SUB-HEAD-II (HT CABLES )
Supply and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 300 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required.
10.1.4
2
5875
2937.5
... More
Supply and making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 300 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required.
10.2.4
2
10667
5333.93
... More
SUBHEAD III-EARTHING AND LOOP EARTHING
Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.
701
2
8152
4076
... More
Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
703
12
64560
5380
... More
Supply and burying of 600mm X 600mm X 3 mm copper Plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I pipe and funnel for watering and one earthing lead of one no. 8 SWG copper wire in 15 mm dia G.I pipe up to switch board ( from appron to switch board the cost of G.I pipe and copper wire will be extra) 30 cm square C.I frame with hinged cover masonry housing alternate layers of charcoal / coke and salt atleast 150mm thick alround etc. as per directions of Engineer in charge complete in all respects.
705
2
20900
10450
... More
Supply and laying of 32mm x 6mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
717
180
27000
150
... More
Supply and Laying of 32mm X 6 mm Copper strip from earth electrode directly in the ground as required complete in all respects.
718
90
99900
1110
... More
Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
716
185
16650
90
... More
Supply and fixing of one number 8 SWG G.I wire in 15mm dia. G.I pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.
721
395
79000
200
... More
SUBHEAD IV-EXTERNAL LIGHTING
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12 mm thik) having 3mm thikness with Single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect. 641
20
330000
16500
... More
Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. Confirming to IP 66 and above protection complete in all respect.
1421
20
98800
4940
... More
Supply and fixing of 6 Amp to 32 Amp DP MCB (10KA) (C curve) for poles
1009
20
14800
740
... More
Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN complete in all respect.
25 Amp SPN 807 (b)
4
71200
17800
... More
Supply and fixing of Bakelite sheet 3 mm thick of suitable size & connector
N.S
10
1000
100
... More
SUBHEAD V-CABLES
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the 120 sqmm 3.5 core 501(o)
95
78280
824
... More
50 sqmm 3.5 core 501(l)
90
44280
492
... More
35 sqmm 3.5 core 501(k)
125
52750
422
... More
25 sqmm 3.5 core 501(j)
48
17904
373
... More
10 sqmm 4 core 501(h)
40
13080
327
... More
10 sqmm 2 core 501(b)
300
87600
292
... More
6 sqmm 2 core 501(a)
190
52440
276
... More
Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire
120 sqmm 3.5 core 503(o)
2
486
243
... More
50 sqmm 3.5 core 503(l)
2
356
178
... More
35 sqmm 3.5 core 503(k)
2
356
178
... More
25 sqmm 3.5 core 503(j)
2
246
123
... More
10 sqmm 4 core 503(h)
2
174
87
... More
10 sqmm 2 core 503(b)
5
400
80
... More
6 sqmm 2 core 503(a)
5
380
76
... More
Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.
120 sqmm 504(j)
4
468
117
... More
70 sqmm 504(h)
2
134
67
... More
50 sqmm 504(g)
4
192
48
... More
35 sqmm 504(f)
8
248
31
... More
25 sqmm 504(e)
8
216
27
... More
16 sqmm 504(d)
6
126
21
... More
10 sqmm 504(c)
12
240
20
... More
6 sqmm 504(b)
8
144
18
... More
SUBHEAD IV-MAIN L. T. PANELS
LT PANEL & FEEDER PILLAR
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports. L.T. PANELS
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.
The minimum clearances between bus bars shall be as follows :
Phase to phase - minimum 20mm
Phase to neutral-minimum 15mm
Main LT Panel
Incoming :
One (1) No 200 Amp. 4P MCCB of 50KA Breaking capacity Metering :
1 Set of CT's one of 200/ 5Amp ratio for Multifunction Meter
1 Set of CT's one of 200/ 5Amp ratio 50/51
1 Set of CT's one of 200/ 5Amp ratio for APFC relay.
One (1) Set of Phase Indication Lamp.
One (1) Set of B+C Type SPD
Bus Bar :
One (1) No.300 Amp.TPN aluminimum bus bar of suitable length.50KA
Outgoing :
Phase indication lamps on Nos outgoing to be provided.
02 No.125 Amp 4P MCCB. (25 KA)
01 No.100 Amp 4P MCCB. (25 KA)
03 No.63 Amp 4P MCCB. (25 KA)
04 No.10 Amp DP MCCB. (10 KA)
Panel described as above
N.S
1
255141
255141
... More
CAPACITOR PANEL-30 KVAR
SITC APFC Panel of 30 KVAR capacity suitable for operation on 415 + 5% Volt, 3 Phase, 50Hz, AC supply, having MPP type, resin bounded, static 5 KVAR capacitors (without oil) in tier formation complete with following TPN MCCB as incomer of the panel, 6 step microprocessor based power factor controller relay capable to select the rating from 1 KVAR to multiples thereon up to max rating of the panel, current limiting contactors for Nos capacitors protected with MCBs, Ammeter (Analogue type) with CTs, Voltmeter (Analogue type) selector switches indicating lights, cooling fans for panel, earthing the panel with 2 Nos. 25mm x 5mm thick GI steel flat from existing earth bar, connection of APFC panel with suitable size 3.5 core aluminium conductor armoured XLPE cable from main LT panel (maximum length of cable 10 mtrs.) and compression glands etc. as reqd. The panel should have provision of timer based circuit in APFC relay to switch ON and OFF the static part automatically as and when requried. Capacity of Static capacitors should be accommodated from the overall rating of the panel and should be designed to switch in independently. The panel should be manufactured with 1.6mm thick CRCA sheet duly powder coated.
Incoming
One (1) No 63 Amp. 4P MCCB of 25 KA Breaking capacity BUS BAR
1 Set of 100 Amps TPN Aluminium Bus Bars OUT GOING 07 No. 16 Amps. TP MCCB (25 KA)
Panel described as above
N.S
1
93374
93374
... More
SUBHEAD IV-MISCELLANEOUS
Providing, Laying and Fixing following Dia RCC Pipe NP 2 Class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 ( 1 Cement : 2 fine sand)including trenching ( 75 cm) deep and refilling etc. as required.
100mm dia 14.14.1
250
117187
468.75
... More
Making of following size of Cable Chamber made of 230 mm thick brick work in cement mortar (1 cement : 6 sand) with PCC 100 mm thick PCC base plastering of inner and outer surface with cement mortar including providing of Heavy Duty C.I Cover complete with digging, refilling and removal of surplus soil complete as required.
900 mm x 900 mm x 1000 mm deep
N.S
4
27048
6762
... More
SUBHEAD VIII- SAFETY EQUIPMENTS
Providing and fixing MV danger notice plate of 200 mm x 150 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required. 2.21
2
403
201.79
... More
Providing and fixing HT danger notice plate 250 mm x 200 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required. 2.22
2
435
217.86
... More
Supplying and Fixing of Fire buckets, round bottom made of G.I. Sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.
1133
8
3920
490
... More
Supplying & Laying of 1800 mm x 900 mm X 12 mm thick chequered rubber matting of tested quality 1136
4
10200
2550
... More
Supply and fixing danger board fabricated from 10 gauge MS sheet as per IE Rules
1109
4
340
85
... More
S/F of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T & P for proper completion of work.
1134
4
1220
305
... More
Supply and fixing of fire extinguishers, ABC Type 4.00 kg. capacity(ISI Marked IS : 15683 & TAC approved) complete with initial charges and wall bracket, along with supply of all materials and labour for proper completion of work.
1131
4
31440
7860
... More
Supply and fixing of CO2 type fire extinguishers, 4.50 kg. capacity(ISI Marked IS : 2878 & TAC approved) complete with initial charges and wall bracket, along with supply of all materials and labour for proper completion of work.
1132
4
47920
11980
... More
ELECTRICAL WORKS
SCHEDULE ITEMS (AS PER PWD SCHE. 2018/DSR 2018/2019)
NON - SCHEDULED ITEMS (AS PER MARKET RATES )
SUBHEAD I- WIRING POINTS Wiring points for light with 1.5 sqmm.FRLSH PVC insulated single core Copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.
138©
360
219600
610
... More
Same as item No. (1) but for two way light Points.
139 ©
8
6328
791
... More
Same as item No. (1) but for fan and light duty exhaust fan.
140©
120
80520
671
... More
Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc.
141©
90
29430
327
... More
Addition when modular type switches etc are used in place of piono type switches etc. in various wiring points.
Addition for light / fan points with modular type switch in place of piono type switch.
187(A)
390
17160
44
... More
Addition for plug points with modular type switch in place of piono type switch.
187(C)
115
9545
83
... More
Addition for Exhaust fan points with modular type switch in place of piono type switch.
187(D)
60
2820
47
... More
Supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm FR PVC insulated 1100 V grade single core multistrand copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit complete, including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer I/C.
1307©
93
11253
121
... More
Supply and wiring of submain 2 number 4 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 221©
3650
543850
149
... More
Supply and wiring of submain 2 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 4 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 222©
1250
255000
204
... More
Supply and wiring of submain 2 number 10 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 25mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 10 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 223©
750
204000
272
... More
Supply and wiring of submain 2 number 16 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 32mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 10 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 224©
490
193550
395
... More
Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work( for Telephone)
148(A)
2450
151900
62
... More
SUBHEAD II-INSTALLATION OF LIGHT FIXTURES AND FANS
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in all respects.
1116
60
8400
140
... More
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
1120
60
11700
195
... More
Supply and fixing hexagonal/Round G.P. fan box of approved make made up of 1.0mm thick ISI Marked G.P. sheet spot weeldeed Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screewed fitted with 300mm round zink coted M.S Bar X 12mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.
1149
60
9000
150
... More
Supply fixing of electronic fan regulator(Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.
1203 (C)
60
31020
517
... More
Supply & fixing of LED Tube Light with Metal heavy dutyBox type batten Light fitting 1 x 22 watt suitable for up to 1 x 22 watt LED Polycarbonate tube light complete including tube etc suitable for both surface & surface complete in all respects.(CAT: AAA)
1413
140
166600
1190
... More
Supply & fixing of recess/Surface mounting round 10 to 15 watt, cut out Min 125mm, Height Min 40mm, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set, suitable for 24Hr continuous Operation,complete in all respect.(CAT: AAA)
1402
90
121500
1350
... More
Suuply and fixing of single LED light wall bracket on matching M.D.F.E.G board base etc. complete in all respect.(CAT: AAA)
412
80
132000
1650
... More
Suuply and fixing of water tight oblong 10 watt LED bulhead luminaire with driverr set confirming to IP 65 and above Protection complete in all respect.(CAT: AAA)
1417
5
7000
1400
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required
DSR 2019 BLDC 1
60
144000
2400
... More
SUBHEAD III-DISTRIBUTION BOARD
Supply and fixing of surface/flush mounting distribution boards with additional metal door withot MCB complete in all respects.(CAT A)
8 Way SPN 1024 (A)
4
7600
1900
... More
12 Way SPN 1025 (A)
20
45000
2250
... More
Supply and fixing of 6Amp to 32 Amp (10 KA)SP MCB in existing MCB, DB complete with connections as required. (CAT: A)
1002
212
55120
260
... More
Supply fixing and making connection of following MCBS complete in all respects as per direction and satisfaction of engineer-in-charge.(CAT: A)
63 Amp. DP MCB (CAT: A) 1011
18
21240
1180
... More
40 Amp. DP MCB (CAT: A) 1010
2
2360
1180
... More
Supply and fixing of power plug with 15A/250 V flush type switch and 5 Pin 15 A/250V flush type universal socket in suitable M.S. box of 175mmx100x50mm size with phenolic laminated bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. 1139
175
59500
340
... More
Supply and fixing of power plug with 20A/250 V flush type switch and 5 Pin 20 A/250V flush type universal socket in suitable M.S. box including supply of all material, labor T&P etc. required for proper completion of work.
1139(A)
60
37500
625
... More
Supply and fixing Single Pole MCBS Blanking Plate complete in all respects. (CAT: A)
1034(b)
40
1000
25
... More
SUBHEAD IV-EARTHING Supply and burring of safe Earthing Electrode T-39 Cu Copper Coated, Length 2000mm, outer pipe 76.3mm X 3.2 inner pipe 42.4mm X 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reucing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame withhinged cover & mansonry housing.(From electrode terminal to switch board, cost of 25x3 copper strip will be extra) Make: As approved in U.P.P.W.D & C.P.R.I.all respects.
727 ©
2
26480
13240
... More
Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.
716
90
8100
90
... More
Supply & fixing of two number 8 SWG G.I. wire in 15mm dia GI pipe for earthing purpose as required complete in all respects.
723
660
138600
210
... More
SUBHEAD V-MAIN L. T. PANELS
PANEL (for type-Admin Building)
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.
The minimum clearances between bus bars shall be as follows :
Phase to phase - minimum 20mm
Phase to neutral-minimum 15mm
METER PANEL
Incoming :
One (1) No 100 Amp. 4P MCCB of 25KA Breaking capacity Metering :
One (1) No. Sets Multifunction Meter Nos incoming
One (1) No. of Phase Indication Lamp Nos incoming
Bus Bar :
One (1) No. 150 Amp.TPN aluminimum bus bar of suitable length.
Outgoing :
Phase indication lamps on Nos outgoing to be provided.
01 No.63 Amp 4P MCB. (10 KA)
19 No.63 Amp DP MCB. (10 KA)
02 No.40 Amp DP MCB. (10 KA)
Panel described as above. N.S
1
151250
151250
... More
SUBHEAD V-MAIN L. T. PANELS
PANEL (for Residence Building)
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.
The minimum clearances between bus bars shall be as follows :
Phase to phase - minimum 20mm
Phase to neutral-minimum 15mm
METER PANEL
Incoming :
One (1) No 100 Amp. 4P MCCB of 25KA Breaking capacity Metering :
One (1) No. Sets Multifunction Meter Nos incoming
One (1) No. of Phase Indication Lamp Nos incoming
Bus Bar :
One (1) No. 150 Amp.TPN aluminimum bus bar of suitable length.
Outgoing :
Phase indication lamps on Nos outgoing to be provided.
Phase indication lamps on Nos outgoing to be provided.
01 No.63 Amp 4P MCB. (10 KA)
07 No.63 Amp DP MCB. (10 KA)
02 No.40 Amp DP MCB. (10 KA)
Panel described as above. N.S
1
85650
85650
... More
SUBHEAD VI- TELEPHONE & DATA SYSTEM
S/F MODULAR BOXES, BASE & COVER PLATE :-
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
1 or 2 Module (75mm X 75 mm) 1.27.1
110
23865
216.96
... More
S/F MODULAR TYPE SWITCH / SOCKET :-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
Telephone socket outlet
1.24.6
20
2125
106.25
... More
TV Antenna socket outlet
1.24.7
60
6375
106.25
... More
Bell Push
1.24.8
20
2250
112.5
... More
Supplying and fixing call bell/ buzzer suitable single phase, 230 V etc as required.
1.38
20
1642
82.14
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required.
1.19
1250
36825
29.46
... More
Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.
2 Pair
1.18.2
550
9823
17.86
... More
Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.
20 Pair N.S
135
34695
257
... More
S/f of 20 pair Telephone Tag Block for Floors and building with Krone connectors , with connection and punching of same. N.S
2
8776
4388
... More
SUBHEAD VII-MISCELLANEOUS
Supply of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 300mm sweep.
N.S
48
106080
2210
... More
Supply and fixing of energy Meterin existing panel and other accessories including connections etc. complete as required 1Phase MeterN
N.S
26
66820
2570
... More
PLUMBING WORKS
EXTERNAL SEWERAGE, RAIN WATER & WATER SUPPLY
SCHEDULE ITEMS (AS PER PWD SCHE. /DSR )
NON - SCHEDULED ITEMS (AS PER MARKET RATES )
Excavating trenches in all kinds of soil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating Nos deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m.(1.50M depth) (Pipes 80 mm to 300 mm diameter) (dsr 2.10.1.2)
460
171409
372.63
... More
Pipes 300 mm to 600 mm diameter (dsr 2.10.1.3)
90
52356
581.74
... More
Open timbering in trenches including shuttering and shoring complete. (Measurement to be taken of the face area timbered) (Depth not exceeding 1.5 meter) (dsr 2.20.1)
1250
76512
61.21
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. (150 mm. dia. RCC Pipes) (dsr 19.6.2)
220
96859
440.27
... More
250 mm. dia. RCC Pipes (dsr 19.6.3)
180
130363
724.24
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design. (150 mm. dia. RCC Pipes) (dsr 19.3.2)
300
184755
615.85
... More
250 mm. dia. (dsr 19.3.4)
150
126415
842.77
... More
Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With common burnt clay FPS (non modular) bricks of class designation 75 (i) For Sewer Line (DSR 19.7.1.1)
40
417396
10434.91
... More
Extra for depth for manholes: Size 90x80cm with With common burnt clay FPS (non modular) bricks of class designation 7.5 (DSR 19.8.1.1)
20
145133
7256.65
... More
Inside size 90x120cms and 90cms deep including CI cover with frame (MEDIUM duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58kg). With common burnt clay FPS (non modular) bricks of class designation 75 (i) For Sewer Line (DSR 19.7.2.1)
15
326864
21790.98
... More
Extra for depth for manholes: Size 90x120cm with With common burnt clay FPS (non modular) bricks of class designation 7.5 (DSR 19.8.2.1)
7.5
65251
8700.22
... More
Constructing brick masonary circular manhole 1.22 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design:1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately): With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 19.11.1.1 )
2
40985
20492.81
... More
Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68m to 2.29m With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 19.12.1)
1.5
12145
8096.74
... More
Providing orange colour safety foot rests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. D.S.R 19.16
250
108727
434.91
... More
Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 : (100mm dia Ductile iron double flanged)(DSR 18.73.1)
50
68821
1376.43
... More
Supply CI specials such as Bends, reducers, collars etc. including cartage, loading, unloading, taxes, excise etc. complete. (10 % of item No. 1)
5
6882
1376.43
... More
Providing push-on-joints to centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket : (100mm dia pipes)(DSR 18.70.1)
16
1373
85.85
... More
Providing and fixing C.I. Sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately): (100mm diameter)(DSR 18.31.1.2)
2
8036
4018.08
... More
Provding and fixing C.I. Double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately. (80mm dia) (DSR 18.59.2)
8
44681
5585.22
... More
100mm dia (DSR 18.59.3)
2
14668
7334.02
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (32mm dia nominal bore)(DSR 18.9.4)
30
11653
388.44
... More
40mm dia nominal bore (DSR 18.9.5)
30
14978
499.29
... More
50mm dia nominal bore (DSR 18.9.6)
85
61613
724.87
... More
80mm dia nominal bore(inner dia 75mm) (DSR 18.9.8)
280
497599
1777.14
... More
Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc. (32mm nominal bore.) (DSR 18.17.2)
2
1053
526.7
... More
40mm nominal bore. (DSR 18.17.3)
2
1263
631.52
... More
80mm nominal bore. (DSR 18.17.6)
4
7955
1988.93
... More
Constructing masonry Chamber 90X90X100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand ) for sluice valve, with C.I. surface box 100mm, top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 18.34.1)
10
156945
15694.55
... More
Constructing brick masonry chamber 600 x 600 x 750 mm inside with F.P.S. brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for Sluice Valve / Air Valve, with C. I. surface box 100 mm top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design D.S.R. 18.33.1
8
72160
9020.09
... More
Constructing RCC precast perforated RCC. slab covered Drain with 150mm thick RCC 1.1.5.3 ( 1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size) wall including earth excavation, 75mm thick bed concrete 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40mm nominal size) and 100mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) for filling haunches including 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) with a floating coat of neat cement inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design: (Drain 300 wide average. Depth 500cm with R.C.C. Slab)(SOR-AR)
225
983533
4371.26
... More
10 No. OF RAIN WATER HARVESTING RECHARGE PITS WITH DESILTING CHAMBER
Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. In all kind of soil upto 1.5m depth (SOR 251)
85.78
15440
180
... More
In all kind of soil upto 1.5m to 3.0m. Depth (SOR 251+254)
79.24
16244
205
... More
In all kind of soil upto 3.0m to 4.5m. Depth (SOR 251+254)
69.3
15939
230
... More
Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) coarse sand, 100mm on the base of pit and 200mm on top of the tank. Including watering, ramming, consolidating and dressing complete (SOR 279A)
16.02
118548
7400
... More
Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 40 mm nominal size) on the base of pit, 100mm thick bed including watering, ramming, consolidating and dressing complete. (SOR 279)
5
37000
7400
... More
Class M-150 brick work in 1:4 cement coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. (SOR 305)
5.42
28509
5260
... More
Providing and fixing of non-woven geotextile having thickness of 400 GSM, having minimum tear strength of 250 ASTM D4533, Width wise atleast 215 ASTM D4533 having puncture strength of 1550 plus asper ASTM D6241 Having elongation at Break of 57% plus as per ASTM D 4595 in two layers, made out of long fibres to hold the modules including cutting, sizing, Heat welding and needle punched for high porosity and proper percolation. Material : Polyester. Purpose of Geo-textile is to act as a membrane. This geotextile allows the water to permeate through and stops soil erosion. Geotextile is free from rodents, soil borne chemicals. (MR)
141.72
115501
815
... More
Supply & installation of Polymer based RAINMAXX Rainwater Harvesting Modules (Honeycomb design on Nos plate) made up of 100% recycled polypropylene capable of taking light vehicular movement upto atleast 30 tonnes / sqm with adequate backfilling & 4 small plates combination creating 3 spans inside the module. These modules are made from combination of large (683*410mm) and small (369*410mm) plates along with external locks. Nos large plate should have atleast fourteen external locking slots inorder to give stability to tank. These tank should have optimum connection & block stability using double lock stability. Nos single tank is made of four large and four small plates in case of single tank and 10 large & 12 small plates for triple tank. Capacity of single tank is (.683*.410*.450) equals to 0.126 CUM. Material : Recycled Polypropylene. Colour : Black.The RAINMAXX tank will be used as a retention tank to collect and hold the water. This will be installed underground and the top layer can be used for landscape/traffic/parking/storage etc. Water collected in the tank will percolate through the recharge well and artificially recharge the ground. (MR)
41.1
671985
16350
... More
Providing, fixing, installing, testing & commissioning of FRP based Microfilter with diameter of 750 mm and height 1000 mm having inlet of 6 inches and outlet of 6 inches with SS 304 mesh . Flow rate of microfilter should be atleast 40 - 45 KL / Hr. ( FRP based RWH Filters should be GRIHA and SVAGRIHA Certified. The product should be registered under GRIHA Criterions 21 & 18 and SVAGRIHA Criterion 9. Certificate should be valid on the current date.) (MR)
2
153720
76860
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually. (DSR 23.2.1.1)
50
30835
616.7
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (150 mm nominal size dia) (DSR 23.4.2)
30
18265
608.84
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (DSR 23.5)
24.26
28208
1162.77
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction
of Engineer-in-charge. ( (DSR 23.6)
26.22
30644
1168.75
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. (DSR 23.7)
26.22
30644
1168.75
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. (DSR 23.8)
2
2641
1320.76
... More
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar (DSR 19.15.1)
8
3295
411.92
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter (DSR 19.19.2.2)
4
3773
943.44
... More
INTERNAL PLUMBING & WATER SUPPLY WORKS
SUB HEAD - I - (SANITARY FIXTURES & INTERNAL PLUMBING)
SCHEDULE ITEMS (AS PER PWD SCHE. /DSR )
NON - SCHEDULED ITEMS (AS PER MARKET RATES )
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
W.C pan with ISI marked white solid plastic seat and lid.
sor 17.3.1
32
198322
6197.59
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :
Angle back wash basin of size 600x480 mm
dsr 17.25.3
32
32845
1026.43
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge
dsr 17.22A
32
25321
791.29
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long,200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms
dsr 17.72
32
5848
182.77
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
45 cm length
15 mm nominal bore
dsr 18.21.2.1
120
9128
76.07
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
dsr 17.71
32
4180
130.63
... More
Providing and fixing toilet paper holder.
C.P. brass
sor 17.34.1
32
19451
607.86
... More
Providing and fixing stainless steel kitchen sink as per I.S.13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required complete in all respect
Kitchen sink with drain board 510 x 1040 bowl depth 200 mm
dsr 17.10.1.3
16
89657
5603.57
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
32 mm dia
dsr 17.28.1
60
4872
81.21
... More
Providing and Fixing, testing & commissioning of ABS Health Faucet (complete with hook and flexible tube min. Length 1.0 m) as required complete in all respect.
MR
40
27000
675
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15 mm nominal bore
sor 18.49.1
50
19384
387.68
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
15 mm nominal bore sor 18.52.1
36
19117
531.03
... More
Providing and Fixing, testing & commissioning of C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.
15 mm nominal bore
sor 18.53.1
180
80413
446.74
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
15 mm nominal bore
sor 18.50.1
40
25537
638.44
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
sor 17.31
40
50398
1259.96
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
dsr17.73
450 mm long towel rail with total length of 495 mm,
78 mm wide and effective height of 88 mm, weighing not less than 170 gms
dsr 17.73.1
40
20485
512.14
... More
Providing fixing testing and commissioning of shower including necessaryvwall chases and making good.
MR
single level wall mixer with spout, adjustable OH shower with arms and wall flange complete with wall flange diverter assembly with non return valves. (for hot and cold water)
MR
40
299720
7493
... More
SUB HEAD - II - (SOIL, WASTE, RAIN WATER AND VENT PIPES)
Providing and fixing soil, waste and vent pipes.
100 mm dia.
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
dsr 17.35.1.3
525
497458
947.54
... More
75 mm diameter
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
dsr 17.35.2.3
375
290475
774.6
... More
Providing and fixing M.S holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.
for 100 mm dia. pipe
dsr 17.37.1
220
60588
275.4
... More
for 75 mm dia. Pipe
dsr 17.37.2
215
58443
271.83
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
100 mm dia
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
dsr 17.38.1.3
14
6885
491.79
... More
75 mm dia
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
dsr 17.38.2.3
6
2357
392.86
... More
Providing and fixing plain bend of required degree.
100 mm dia
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
dsr 17.39.1.3
36
11122
308.97
... More
75 mm dia
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
dsr 17.39.2.3
30
6554
218.48
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
100x100x100mm
sand cast iron S&S as per IS-3989
dsr 17.43.1.2
60
39182
653.04
... More
75x75x75 mm
sand cast iron S&S as per IS-3989
dsr 17.43.2.2
24
12295
512.32
... More
Providing and fixing single equal plain junction of required degree
100x100x100mm
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
dsr 17.44.1.3
30
15361
512.05
... More
75x75x75 mm
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
dsr 17.44.2.3
26
7387
284.15
... More
Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75mm dsr 17.47.1.2
45
37450
832.23
... More
Providing and fixing single unequal plain invert branch of required degree : 100x100x75mm dsr 17.52.1.3
30
16437
547.9
... More
Providing and fixing terminal guard.
100 mm
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
dsr 17.56.1.3
48
17125
356.79
... More
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :( c.o.p.) 100 MM dsr 17.55.1.2
20
10910
545.54
... More
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :( c.o.p.) 75 MM dsr 17.55.2.2
12
4857
404.82
... More
Providing and fixing collar
100 mm
Sand cast iron S&S as per IS - 3989
dsr 17.57.1.2
220
86378
392.63
... More
75 mm
Sand cast iron S&S as per IS - 3989
dsr 17.57.2.2
180
43626
242.37
... More
Providing and fixing M.S. stays and clamps for sand cast iron / centrifugally cast (spun) iron pipes of diameter :
100 mm
dsr 17.59.1
285
32737
114.87
... More
75 mm
dsr 17.59.2
180
12873
71.52
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100mm inlet & 75mm outlet.
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
dsr 17.60.2.3
125
61768
494.15
... More
Painting sand cast iron / centrifugally cast (spun) iron soil, waste vent pipes and fittings with paint of any colour such as chocolate, grey, or buff etc. over a coat of primer (of approved quality) for new work:
100 mm diameter pipe
dsr 17.65.1
920
57132
62.1
... More
75 mm diameter pipe
dsr 17.65.2
690
32588
47.23
... More
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. ( for wash basin waste )
32 mm nominal bore dsr 18.10.4
125
62901
503.21
... More
Providing and fixing Heavy Class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for waster and FT & UT.
MR
124
79856
644
... More
Providing and fixing G.I. EXTENSION PIECE for 100 mm dia floor trap formed out of main pipe (Type A) with multiple side inlets, suitable for various dia pipes, side connections, including all fixtures and fittings as per site conditions and as per standard details and water tight sealing of joints and area surrounding the grating and as directed.
MR
124
195548
1577
... More
Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C rain water pipe including bed concrete as per standard design(embedded in the flooring / ground) 100 mm dsr 19.2.1
125
99943
799.55
... More
Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter dsr 12.41.2
360
68464
190.18
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110mm Coupler dsr 12.42.1.2
115
12316
107.1
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110mm Bend 87.5° dsr 12.42.5.2
45
5303
117.86
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110mm Shoe (Plain) dsr 12.42.6.2
20
2052
102.61
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm dsr 12.43.2
120
33160
276.34
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
dsr 12.22
26
6189
238.04
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
dsr 12.44
26
1112
42.77
... More
SUB HEAD - III - (INTERNAL WATER SUPPLY)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havin thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
20 mm dia nominal bore
dsr 18.8.2
575
261423
454.65
... More
25 mm dia nominal bore
dsr 18.8.3
390
217998
558.97
... More
32 mm dia nominal bore
dsr 18.8.4
295
187732
636.38
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.
Internal work - Exposed on wall
20 mm dia nominal bore sor 18.10.2
120
40002
333.35
... More
25 mm dia nominal bore
sor 18.10.3
225
98678
438.57
... More
32 mm dia nominal bore
dsr 18.10.4
185
93093
503.21
... More
40 mm dia nominal bore
dsr 18.10.5
160
103593
647.46
... More
65 mm dia nominal bore MR
695
569205
819
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
20 mm dia nominal bore
dsr 18.38.2
135
2367
17.54
... More
25 mm dia nominal bore
dsr 18.38.3
190
4343
22.86
... More
32 mm dia nominal bore
dsr 18.38.4
185
5070
27.41
... More
40 mm dia nominal bore
dsr 18.38.5
170
5472
32.19
... More
Providing and fixing gun metal gate valve with wheel of approved quality. 20mm dia nominal bore dsr 18.17.1A
17
7008
412.28
... More
25mm dia nominal bore dsr 18.17.2
21
11060
526.7
... More
32mm dia nominal bore dsr 18.17.3
13
8209
631.52
... More
40mm dia nominal bore dsr 18.17.4
10
7841
784.15
... More
65mm dia nominal bore dsr 18.17.6
12
23867
1988.93
... More
Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 10 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.
40 mm dia.
MR
2
2542
1271
... More
Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 10 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.
50 mm dia.
MR
2
3730
1865
... More
Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. (100mm diameter ) (sor 19.1.1)
155
52000
335.49
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design (100mm dia SW pipe) (DSR 19.2.1)
178
142319
799.55
... More
Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size P type With Sewer bricks conforming to IS : 4885 (DSR 19.4.2.2)
30
65047
2168.26
... More
TOTAL INTERNAL PLUMBING & WATER SUPPLY WORKS: SUB HEAD - I to III FIRE FIGHTING WORKS.
SUB HEAD - I (WET RISER SYSTEM - EQUIPMENTS)
Supplying, installation, testing and commissioning of
electric driven terrace pump suitable for automatic
operation and consisting of following, complete in all
respects, as required: (Terrace Pump)
a) Horizontal type, multistage, centrifugal, split casing
pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.
c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
d) Suitable cement concrete foundation duly plastered and with anti vibration pads.
450 lpm at 35 m Head 4.2
2
152305
76152.68
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
1.2 Meter high and 250 mm dia.
2
32158
16079.46
... More
Supply, Installation, testing and commissioning of pressure switches for Hydrant / Diesel Engine Driven Pump / Jockey Pumps, diaphragm type, adjustable range from 0-9 bar and a regulation range of 0.1 - 1.5 bar direct mounted SNAP acting type made from die cast aluminium with epoxy powder coated finish and SS316 diaphragm and other wetted parts, including necessary wiring upto control panel & other materials as required as per specifications.
MR
2
13648
6824
... More
SUB HEAD - II - (PIPING, VALVES AND ACCESSORIES)
SLTC of M.S. pipe on surface
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
100 mm dia DSR & AOR Wet Riser & Sprinkler 2019_7.7
124.55
166699
1338.39
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required.
100 mm dia
DSR & AOR Wet Riser & Sprinkler 2019_11.5
4
23050
5762.5
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required.
100 mm dia
DSR & AOR Wet Riser & Sprinkler 2019_14.5
2
19350
9675
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
DSR & AOR Wet Riser & Sprinkler 2019_13
2
2305
1152.68
... More
Supplying and Fixing of Fire Man's axe with heavy insulated rubber as per standard conforming to IS 926.
MR
4
1452
363
... More
SUB HEAD - III - (HYDRANTS SYSTEM)
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
Single headed Stainless steel
9.2
4
21382
5345.53
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
Stainless Steel (Grade 304)
16.2
8
31671
3958.92
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
Stainless Steel (Grade 304)
18.2
4
5885
1471.42
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.
20 mm nominal internal dia water hose thermoplastic
(Textile reinforced) type -2 as per IS: 12585
20 mm nominal internal dia gun metal globe valve &
nozzle.
Drum and brackets for fixing the equipmets on wall.
Connections from riser with 25 mm dia stop gun metal
valve & M.S. Pipe and socket.
30M
17.1
4
30046
7511.6
... More
SITC weather proof M.S Door and glass fire door size 2100 mm x 900 mm or as per arch.
Supplying, installation, testing and commissioning of weather proof M.S door and glass fire door size 2100 mm x 900mm fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx6mm complete with glass, locking arrangements to accommodate the following: -
a) Gunmetal single headed Hydrant valve - 1 No.
b) Fire Hoses 63mm, 15 M long with accessories - 2 Nos.
c) Short branch - 1 No.
d) First Aid hose Reel - 1 No.
e) Fire Extinguisher - 2 Nos.
f) Fireman's Axe - 1 No.
g) Pressure Gauge - 1 No.
The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved shade.
MR
4
27340
6835
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
2 way-100 mm dia M.S. Pipe
2
11767
5883.92
... More
SUB HEAD - IV - (FIRE EXTINGUISHERS)
Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed.
4.5kg capacity cylinder.
MR
4
19944
4986
... More
Providing and fixing fire extinguisher of ISI marked (IS:15638) portable chemical fire extinguisher, water (gas pressure) type capacity 9 litres with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets as required as per specifications.
MR
4
6996
1749
... More
SUB-HEAD-IV FIRE ALARM SYSTEM Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all DELHI SCHEDULE OF RATES (E&M) 2018 65 accessories as required- 2 Nos.(one to act as standby) Item No. Description Unit Rate Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set. Amplifier change over switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt,30 AH Nos sealed maintenance free batteries -1 set.
6 Loop Panel.
17.1.11
2
85235
42617.85
... More
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
DSR E&M 2018_17.1.2
8
8150
1018.75
... More
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
DSR E&M 2018_17.1.3
20
8250
412.5
... More
Supplying, installation, testing & commissioning fire alarm ounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
DSR E&M 2018_17.1.7
32
13657
426.79
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of cross linkable Ethylene Propylene Runner (EPR) inshulation and LSZH inner bedding, steel wire armouring & FRLS outer sheath complete as required.
DSR E&M 2018_17.5.1
815.65
238871
292.86
... More
Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil (loan clay or sand including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer PWD 251
45.78
8240
180
... More
Providing and laying in cement concrete 1:4:8 (1 cement:4 cosrse sand :8 graded stone aggregate 40mm nominal size) and curing complete, including cost of form- work, in foundation and floors. (PWD- 273)
1.35
9072
6720
... More
R.C.C. wor with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:1.5:3, in slab exc;idomg supply of reinforcement and its fixing and binding the same with 24 B W G binding wire and including necessary centering
As initem 4 above but in R.C.C. raft foundatin and footing with approved stone bllast. ( PWD - 287)+diff
6
48660
8110
... More
Same as item no.4 but for Beam + 0 LVL To+3.50 LVL. PWD 285+diff
3.16
28092
8890
... More
Same as item no.4 but for Beam + 3500 LVL To+7000 LVL.
1.43
12839
8978.9
... More
Same as item no.4 but for Beam + 7000 LVL To+10500 LVL.
1.43
12966
9067.8
... More
As in item 4 but for the beams + 10.5 LVL To + 14.00 LVL.
1.43
13094
9156.7
... More
Same as item no.4 but forBeam + 14.00 LVL To+ 17.50 LVL.
2.83
26165
9245.6
... More
Same as item no.4 but for Slab + 0 LVL To+ 3.50 LVL. 284A
0.2
1684
8420
... More
Same as item no.4 but for Slab + 3500 LVL To+7000 LVL.
0.41
3486
8504.2
... More
Same as item no.4 but for Slab + 7000 LVL To+10500 LVL.
0.41
3521
8588.4
... More
As in item 4 but for the Slab + 10.5 LVL To + 14.00 LVL.
0.41
3557
8676.6
... More
Same as item no.4 but for Slab + 14.00 LVL To+ 17.50 LVL.
14.51
127061
8756.8
... More
Same as item no.4 but for Slab + 17.50 & above
7.46
65953
8841
... More
Same as item no.4 but for Column + 0 LVL To+ 3.50 LVL.
2.16
18273
8460
... More
Same as item no.4 but for Column + 3500 LVL To+7000 LVL.
1.35
11535
8544.6
... More
Same as item no.4 but for Column + 7000 LVL To+10500 LVL.
1.35
11649
8629.2
... More
As in item 4 but for the Column + 10.5 LVL To + 14.00 LVL.
1.35
11763
8713.8
... More
Same as item no.4 but for Column + 14.00 LVL To+ 17.50 LVL.
0.38
3343
8798.4
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates) wrought to required shape as necessary including bending for proper supply of steel its wastage bend hooks and suthorised over l (a) For + 0 LVL To + 7000 LVL
8.86
78588
8870
... More
(b) For + 7000 LVL To + 10500 LVL.
21.19
189834
8958.7
... More
M.S. Work in railling PWD 502c
11.31
96135
8500
... More
G.I. pipe 15mm dia in Raling Horizontally
120
21360
178
... More
Painting 1st coat over priming coat (but excluding cost of priming coat_ on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10 sqm. In area white superior synthetic enamel such as LUXOL3, Hi-gloss apcolite supe
51.05
4084
80
... More
Painting of O.H.T. in 2 coat after priming coat with super cote Exterior Acrylic Emulsion. I.C.I. - make complete materila labour & T&P.
198
18612
94
... More
Extra Cost for centering, shuttering & scaffollding.
90
61597
684.42
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements