Banda Development Authority Tender

Supply and Laying 80 mm. GI pipe DSR No 2016 /2016/1552/page 310

Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 75 watt. To 90 watt confirming to IP66 protection complete in all respect. (SI No. 1423)

S/F of plain or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape and making connection etc. complete in all respect. (SI No. 504 (C)) (16 Sqmm. Lags)

S/F of plain or pin type copper tin plated cable socket (Lug) to the cavle leads, insulating with tape and making connection etc. complete in all respect. (SI No. 504(e)) (25 Sqmm. Lags)

S/P of refelcting red color 15 mm. wide strip 3mtr. Complete with all respect.

Supply and burying of 40mm. Dia X 4.5 mtr. Long GI pipe verically for earthing having 12 mm. dia holes space 75mm. A part drilled up two mtrs. From the bottam complete with earthing laid of nos. 6 to 8 SWG GI wire in GI pipe up to appron up to switch board, 30cm square C.I. box hinged cover masonary enclosure, funnel at top alternet layers of charcol/coke and salt at least 150 mm. thick alround etc. as per deriction by E/I. (SI No. 701)

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting MS. Channel base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four pole 36 KA with thermal magnatic relese) swithches complete in all respect. the instrument chamber shall be comprise of flush type digital metering system for phase voltage, current and other parameaters (K.V.A.P.F.,K.W. etc) in each phase with tuch type selectors switches for diffrent readings instrument fuses, current transformer etc. the panel board shall have suitable capacity electrolytic aluminium busbras as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be sutaible cable and boxes compression glands and indicating lamp on incoming etc. the job includes the grouting of the board as per directions of E/I. all out going of 100 Amp and above shall have an ammeter the panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2 mm. cubicle type swithch board shall be of cat A&B only.

Supply & Laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground lavel over a cushion of 75mm. Thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. (SI No 501 (B) 10 Sq. mm 2 core

01 Transfarmer 25 KVA (Analaised)