Banaras Hindu University Tender

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A, 16 KA,TPMCCB

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.). 4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Single Pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. For 4 way, Double door TPN MCBDB

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. For 6 way, Double door TPN MCBDB

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 185 sq. mm and upto 400 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 35 sq. mm (32mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. for loop earthing as required. 3½ X 300 sq. mm (70mm)

Supply of the 1.1KV grade 3 ½ core × 35 sqmm. LT XLPE power cables (Make - Polycab/Finolex/KEI)

Supply of the 1.1KV grade 3 ½ core × 300 sqmm. XLPE LT power cables (Make - Polycab/Finolex/KEI)

Fabrication, Supply, Installation testing & Commissioning of electrical LT panel (front area 3.6 Sq mt approx) of cubical construction, floor mounted type, fabricated out of 2 mm thick CRCA sheet, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper/Aluminum strip, having switchgears and accessories , mountings and internal wiring earth terminals, numbering etc. complete in all respect with following in coming and outgoings suitable for operation on 415V, 3 phase , 50 Hz Ac supply with enclosure protection class IP 42 as required. Incoming :- 1. 630Amp 50KA FPMCCB,Ics=100%Icurating-01 No. 2.Digital Voltmeter 0-500V with selector switch-01 Set 3.Digital Ammeter (0-630A) with selector Switch& CTs–01 Set 4. LED type RYB phase indicating lamps –01 set 5. Set of (04 Nos.) aluminum Bus Bar 800A - 01 set 6. 3 Phase Multifunction Energy Meter with CTs Suitable for 800 A – 01 no. Outgoing:- 1. 400 Amp,35 KA,TPMCCB O/G, Ics =100% Icu rating-01 No. 2. 125A 16 KA TPMCCB,Ics =100% Icu rating -07 No. 3. Spare Space for 125 A MCCB - 01 No.

Fabrication, Supply, Installation testing & Commissioning of electrical LT panel (front area 2.6 Sq mt approx) of cubical construction, floor mounted type, fabricated out of 2 mm thick CRCA sheet, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper/Aluminum strip, having switchgears and accessories , mountings and internal wiring earth terminals, numbering etc. complete in all respect with following in coming and outgoings suitable for operation on 415V, 3 phase , 50 Hz Ac supply with enclosure protection class IP 42 as required. Incoming :- 1. 315 Amp 35 KA,TPMCCB, Ics =100% Icu rating - 01 No. 2. Digital Voltmeter 0-500V with selector switch - 01 Set 3. Digital Ammeter (0-630A) with selector Switch & CTs – 01 Set 4. LED type RYB phase indicating lamps – 01 set 5. Set of (04 Nos.) aluminum Bus Bar 400A - 01 set Outgoing:- 1. 125 A 16 KA, TPMCCB, Ics =100% Icu rating - 07 No. 2. Spare Space for 125 A MCCB - 01 No.