Bal Vikas Seva Evam Pustahar Tender

Supply and fixing of wire, Power point and Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 nA/250 volt flush typ[e universal modular socket switch on concealed M.S. box including supply of all material, labour t&P etc. required for proper completion of work.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire

Supply & Fixing of following sizes of medium class PVC conduit alongwith accessories in sueface/recess including cutting the wall & making it good the same in case of recessed conduit as required. 25MM

Supply and fixing of recess mounting round 15 TO 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT-AAA

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 3 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 6 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 12 Module

Blank plate for modular plate type switch boards wherever required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing Drawing Connecting And Testing Of Enhanced Categoey 4 Pair Lan Local Area Network Cable 24 AWG Conductor Performance Specifide 5E U L and CUL Listed In Existing PVC Conduit .(CAT-6 Network Cable)

Supply and fixing of 400mm Wall Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton/Bajaj/Havels Equivalent

Supply and Fixing of Deep Recess Mounting round 12.5 Watt COB LED Spot Light having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent

Providing & Fixing of Modular plate type white RJ 45 CAT 6 Data/Talephone outlet / information outlets ETL verified to meet or exceed TIA / EIA category 6 requirements, universal wiring label permitting to either T568A or T568B, UL listed, for computer networking complete in all respect with cover plate, grid plate, screws, MS box, etc with connections as required with 2nos RJ-45 Data outlet

Supply and fixing of 250mm Ventilating Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton/Bajaj/Havels Equivalent

Providing and fixing of LED COB Hanging Light as per the approved design all complete as per drawing, specification and direction of engineer incharge.

Providing & Fixing of at all height false ceiling including providing and fixing of frame made of special section power pressed from m.s. sheet and galvonised in accordance with zinc coating of grade 350 as per IS 277 and consisting of angle cleat 25x1.6mm with flanges of 27mm and 37mm at 1200mm c/c one flanged fix to the ceiling with dash fastener 12.5mm dia and and 40mm long with 6mm dia bolt to the angle hangers of 25x25x0.55 mm of required lengthened other end of angle hanger being fixed with nut and bolts to GI channel 45x15x0.90mm running at the rate of 1200 mm c/c to with the ceiling section 0.5mm thick button wedges of 80mm with tappered flenges of 26 mm each having clips of 10.5mm.at 450mmc/ c shall be fixed in direction perpendicular to GI channels with connecting clips made out of 2.64MM diax230mm long GI wire at every junction including fixing the gypsum board with ceiling section and perimetre channels 0.50 mm thick 27mm high having flenges of 20mm and 30mm long ,perimeter of ceiling fixed to wall /partition with help of rawl plugs at 450mm c/c with 25 mm long drive all screws @230mm interval including jointing and fixing to a flush finish of tappered end sq edge of board with recommended filler jointing and tapper finisher and two coat of primer suitable for board as per manufacturers specification and also including the cost of making of openning for light fittings grills diffusers cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of engineer incharge but excluding the cost of painting. 12.50mm thick tapered edge gypsum board.

Providing and fixing of 8MM Laminate Flooring Made From High Density Fibre Board Having Density 900 Kg/M³ Or More, Core Board Based Of Dome Technology In 8mm / 12 Mm Thickness, Made From Lignocellulosic Material-Specifically “Plantation Timbers” Like Eucalyptus Manufactured With Homogeneous Core, The Flooring Shall Be Topicalized With An Anti-Bacterial Surface With Dimensional Stabilityand Laminated With Melamine Formaldehyde Impregnated European Made Décor Paper (70-120gsm) Duly Overlayed With An Anti Abrasion Layer Of Aluminium Oxide Impregnated Tissue (55,65,85gsm) In Ac3 (2000 Abrasion Cycle) / Ac4 (4000 Abrasion Cycle) / Ac5 (6000 Abrasion Cycle ). The Product Shall Have An Isomatric Locking Profile Made From A 5 Spindled Profiling Head. The Locking Profile Shall Be Wax Coated To Prevent Moisture Seepage. The Laminate Flooring Shall To Be Fixed On A Base Of 2mm Thick Layer Of Pu Foam Having A Density Of 24kg/M³. The Bare Floor Shall Be 1st Covered With Pe Sheet Having A Thickness Of 0.2mm. The Flooring Solution Shall Be Accompanied By Relevant Accessories-Skirting, Reducers, End Profiles, Stair Nose & Beading Of Matching Shades. Make-ActionTesa/Armstrong/Equivalent

Providing & Making & Fixing of Commercial Wall Paneling Made with Aluminium Tube of 1"x2" @ 2Ft Center To Center Frame Work Filled with Glass Wool & then Cladded with 12MM Ply on One Side, as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & Making & Fixing of Wall Panneling with 5.5MM MDF & 1MM Laminate on Existing Commercial Wall Panelling/Partition complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & Fixing of Coloured Lacquered Glass Panelling on Existing Commercial Wall Panelling/Partition complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & Making & Fixing of Storage Cabinet made of 19mm board, having shelves & shutters & teak wood beading & finished surface of 1mm thick Laminate including all hardware like tower bolts, hinges, lock & handle as per approved drawing & direction of Engineer incharge.

Providing & fixing of Flush Door Laminated both side complete with all Fittings Like Hinges, Mortis lock, Door closer, Tower Bolt etc all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Supply & Fixing of 3 Track windows made from multi chambered UPVC profiles of minimum 60/108 mm thickness of (Wintech make or equivalent) in natural from stailized for heat, light, impact & UV radiation. The UPVC profiles should be reinforced with galzvanized steel profiles of designed thickness. Toughened glass of approved colour in 4/5 mm or as desired by the costumer shall be fixed with heveled beads. All openable / sliding sashes shall be having grey/black colored weather seal fitted in continuous lenghts made from bubble PTV Rubber & side Hung with 90L openin friction syats of rust proof stainless steel with provision of multipoint lockng system (casement only) made from Espag rods (coated steel) all handle shall be made from die Cast zinc alloy in white finish only as approved by the Architect/ Engineer -in-Charge.

Providing & Fixing of Roller Blinds with Hand Rail of approved shade as per drawing & specification as approved by Engineer -in-Charge.

Miscellaneous Civil & Electrical Dismantalling Work