Azamgarh Development Authority Tender

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerin-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 DSR 12.45.4

Providing and supply Modern Director chair (Geeken/ Featherlite or Equivalent) at cabins (MOF-101)

Providing of Modern office table in the finished with laminate/glass and wooden structure with laminate finsh and necessary hardwares (haffele/Doorset or equivalent) as per direction of Architect in charge .

Providing of Secretary Table korian top finieshed as per direction of Architect in charge .

Providing & Installation of Partition P&F of Half-glass partition of 12mm thick toughened glass

P&F of Partially wooden till 4'-6" and glass Partition

P&F of seamless full height MDF partition of between staff cabins

Providing & Installation of wooden storage

Toilet accessories Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (Parryware) CNS-WHT-961S DSR 17.78

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer DSR 17.7A

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. DSR 17.80

Doors P&F of Main door 35mm thick of 3'-4" wide MDF single panel door finished with mica on both sides and necessary hardwares

P&F of Main door 35mm thick of 2'-6" wide MDF single panel door finished with mica on both sides and necessary hardwares in Toilet

P&F of door (both side open) 12mm thick toughened glass sliding door on both sides and necessary hardwares.

Civil Work Dismentling and repairng of brick , R.C.C. And flooring work if required at the time of construction

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. DSR 10.3

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR 10.2

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class deodar wood MEZZNINE FLOOR DSR 11.33.2

Electrical Work Wiring points for light with 1.5 sqmm. FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside. 138©

Same as item No. (1) but for two way light Points. 139 ©

Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc. 141©

Supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm FR PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer I/C. 1307©

Supply and wiring of submain 2 number 4 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 221©

Supply and wiring of submain 2 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 4 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 222©

Supply and wiring of submain 2 number 16 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 32mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 10.0 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 224©

Supply and wiring of submain 4 number 10 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 32mm dia PVC conduit along with two numbers 6 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 278©

Supply and wiring of submain 4 number 25 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 50mm dia PVC conduit along with two numbers 16 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 280 (c)

Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work( for Telephone) 148(A)

Supply & fixing of recess mounting round 10 to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.(CAT: AA) 1402

Supply and fixing of surface/flush mounting distribution boards with additional metal door withot MCB complete in all respects.8 Way SPN 1024 (A)

Supply and fixing of surface/flush mounting distribution boards with additional metal door withot MCB complete in all respects.12 Way SPN 1025 (A)

Supply and fixing of surface/flush mounting distribution boards with additional metal door withot MCB complete in all respects.4 Way TPN 1026 (A)

Supply and fixing of surface/flush mounting distribution boards with additional metal door withot MCB complete in all respects.6 Way TPN 1027 (A)

Supply and fixing of 6Amp to 32 Amp(10 KA) MCB in existing MCB, DB complete with connections as required. 1002

Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge.25 Amp. DP MCB 1009 CAT-B

Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge.63 Amp. DP MCB 1011 CAT-B

Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge.40 Amp. 4 Pole MCB 1020 CAT-B

Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge.63 Amp. 4 Pole MCB 1020 (A) CAT-B

Supply and fixing of power plug with 15A/250 V flush type switch and 3 Pin 15 A/250V flush type socket in suitable M.S. box of 5mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. 1139

Supply and fixing Single Pole MCBs Blanking Plate complete in all respects. 1034(b)

S & F of surface/flush mounting 6 ways V TPN distribution board with additional door without MCB complete in all respect, as directed at site by Engineer in charge. 1027 CAT-B

S/F MODULAR BOXES, BASE & COVER PLATE :- Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75 mm)

S/F MODULAR TYPE SWITCH / SOCKET :- Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. Telephone socket outlet

Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required. 2 Pair

Providing and installation of LED false ceiling Light of 200x200mm in the ceiling Area

Providing and installation of Decorative wall Fixuture light point at 8' height

Providing and Installation of Tube Lights

P&F of Internet Wifi Router

Providing and Installation of wall mounted fan

Providing and Installation of ceiling fan

Providing and Installation of exhaust fan